Advertisements:




Saving An Image..?


I have a problem on saving images from a webpage. Yes, i did right-click on an image and click "save image as. " And a window popped out asking where should i save the picture. But every time i save it on my picture folder, it says "there are no more files. " I tried to save it on my music folder and the same thing happened. So i decided to save it on my desktop, but then a small window popped out and said "the file is not valid. "
I used to think that my picture folder didn't have enough space, but it didn't make sense, because when i copied pictures from my friend's pendrive to my picture folder, it worked. And i also thought that it's the web program that has problems (i was using firefox) but that seemed impossible, too, because this problem also occurred when i used internet explorer.
This had never happened before. This problem just recently occurred about a few days ago.
Help me please!


View Full Post With 4 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


System Image Reports Two Boot Drives To Image

I have a sata (boot drive) and an ide drive in my win 7 pro 64 bit machine. Is there any way to remove the old boot partition on my ide from the list of drives to image w/ sys image? I can understand the c: part (sata/boot) and the "system reserved" but i don't want to image the d: part (1st part on old ide xp pro boot drive that has 84gb on it that i don't want to bkup). Funny thing is that the ide drive doesn't even show up on the boot sequence in bios. I really don't want to reformat in case something happens to my new sys i can still run xp on my old one (i lost my xp install disk).

I just want to leave it out of the sys image list. Theres no way to remove it from the list without reformatting the d: part. (Old boot drive)? Can i possibly make the d: part. Non bootable without running the xp installation on it and make it bootable again later?Maybeny help removing it from the list would be greatly appreciated! 


Posted On: 2010-06-26 . View Related Posts . . View 3 Replies .

System Image Recovery Can't Find System Image

I am trying to restore a backup system image to my repaired pc. It is wiped clean. I have the "repair disc windows 7 64 bit" that i created in windows 7. Using windows 7 backup i have a system image backup on an external wd essentials 1tb usb hard drive. I insert the repair disc and start the system. Get to system recovery options. I have the external hard disk with the system backup image connected. Select system image recovery option. Says "windows cannot find a system image on this computer. Attach the backup hard disk or insert the final dvd from a backup set and click retry. Alternatively, close this dialog for more options.

Retry gives me the same message. Tried starting with drive attached, not attached, same result. Click cancel. Next option selected is "select a system image. " No system image listed. Hit refresh, still nothing. Top of screen says "click advanced to add a network location or install a driver for a backup device if it does not show up in the list below. "  I click on the advanced tab.

Option to "search for a system image on the network" or "install a driver. " I select install a driver. Find the right driver for the wd essential hard drive (disk.sys and partmgr.sys) and when i click on them i get "the specified location does not contain information about your hardware. "  Click ok. Can't find how to load these drivers i am being asked for. Funny thing is that on the screen where i search for driver i can see the wd essential hard drive connected to the system. I can also see the system image files but when i click on them i get the same error message, "the specified location does not contain information about your hardware. "


Posted On: 2010-08-12 . View Related Posts . . View 5 Replies .

Saving Files

I am having trouble with window 7, saving files and other programs, i have to upgrade 3 other programs that i mostly use. Photo shop(new software)  gives me a message  about not turning off maximize compatibility and can't save files. Family tree won't let me save to pdf. Ordered new update. Way to much time wasted looking for help on the net and can't use explorer 8, as it won't allow me to view pictures in side my email. I have to use google chrome. This is a new pc i received less than two weeks ago.

Posted On: 2010-04-03 . View Related Posts . . View 2 Replies .

Saving A Theme

At time i want to change properties of an existing thme and overwrite the original. Well, when i click "save theme" and type in the same name as an existing theme i end up with 2 themes with the same name. I would assume windows would ask me if i wanted to replace the other theme. I am then forced to delete the original hoping i'm deleting the proper one. Is this normal? What are some guidelines as to saving themes? I change elements of themes frequently. I don't want to save different themes and end up have hundreds of themes on my system.

Posted On: 2010-08-11 . View Related Posts . . View 3 Replies .

Ie Problem With File Saving

When i am on the internet, specifically ancestry.com and other such sites, i try to save files to my computer. I try to have them saved to my desktop or documents folder, but they keep getting saved to some temporary folder that i can never find! It is so irritating! When i try to do a search in the start menu, my files never show up, nor does the temporary internet file folder, which i have looked for in all the places they say to look.

What can i do so my computer stops trying to "protect" me by hiding my files? And where do i go to find the ones that are already there?


Posted On: 2010-02-03 . View Related Posts . . View 2 Replies .

Error When Saving Files

When i try to save file, i get that error (i have windows 7 (64bit))

You don't have permission to modify files in this network location

Contact the administrator per permission to make these changes"

Then pc saves broken file and then i save again and replace that broken file then it's okay. I'm doing work with pictures, like "save picture as" and thats very annoying (error with every picture) to save file twice. I'm computer's administrator and only user. I don't know what's the problem so i turned here to get help.


Posted On: 2010-02-20 . View Related Posts . . View 7 Replies .

Saving Images From Internet

I have accessed a family history website and attempted to save a copy of a certificate. The website gives you the option to save the image online and/or save to your computer. In the past i have chosen to save to my computer and navigated to the relevant folder on my computer, given the file a name and hit the save button. Done! This was using windows xp. I could then view/print the file at any time. It was where i expected it to be in the folder i had created for that purpose.

Now i am told i do not have permission to save to my selected folder on c drive. "Would i like to save to my pictures?" Eventually i relented and said yes.

Result, i can only see the picture when i save another image to the folder. In the save window.

The folder says it is empty when i attempt to view the image through the explorer window. It appears i can only see folders not files in the libraries view. I attempted to create a new folder in the my pictures folder so i could organize the images but i can't see files in there either.

How can i fix the problem?


Posted On: 2010-03-07 . View Related Posts . . View 2 Replies .

Folder Setting Not Saving

I noticed that folder settings are not being saved after i restart the pc. There are two scenarios.
1. After i installed winamp media player, all audio files default to that program. I will open an mp3 file with windows media player and tell it to always open with this program. It then opens all mp3 files with wmp instead of winamp, but as soon as i restart it goes back.

2. I have an mp3 player which i connect to the pc and device stage opens it up and says that there is a new update for the player. I hit update and the interface changes. This stays like that until i restart the pc. Once i restart it, the interface goes back to the old one and it tells me there is a new update.
 
Windows 7 x64 with latest updates and patches installed.


Posted On: 2010-04-13 . View Related Posts . . View 3 Replies .

Saving Of Favorites Problem

In win 7-64, ie8, everytime i save a favorite, it saves two lines to the folder. One entry is the name i gave it. That entry will not open the site. The second entry is the complete link  it does open the site. For example:

Saved the following with the name i gave it:
Kitchen cabinet finishing

The second line, never adjacent to the first saved line was:
Kitchen-cabinets-and-hardware.com-kitchen-cabinet-finishing.html

The entry of the name i gave it is useless.

How can i solve this problem?


Posted On: 2010-02-20 . View Related Posts . . View 2 Replies .

Saving Passwords And Login Id

I have a brand new laptop with w7 home/pr pre-installed. Auto-update is working so it's up to date. I use a zyxel wireless-n router which is functioning fine with all my xp laptops and my w7. Also attached to the network are a wd nas as well as various print-server connected printers. My security software is zone alarm extreme (up-to-date).

The password issue:
(1)  the w7 laptop logs on fine when i startup in windows and to the network. But when i open explorer and click on the nas, i always have to enter the logon-id even though i tell it to save it.

(2)  passwords are not saved with outlook 2003. I've applied every method in kb 290684 and 829918, including the registry stuff. To no avail.

(3)  windows live mail - same problem - causing failures.

(4)  ie 8 - will not accept a modified default search engine setting . . . Related? So now i use firefox but i need ie since some foreign sites do not accept firefox (even in ie mode). There are no problems with accessing internet sites which require logon and passwords. Since the laptop is new i have not tried local applications with password settings. However, until the email is resolved, the w7 laptop cannot become the primary laptop.

I'm sending this from an xp since i cannot logon with a w/live logon on the w7 laptop. Any suggestions on how to fix this "save password" problem are appreciated.


Posted On: 2010-02-23 . View Related Posts . . View 4 Replies .

Saving To Network Drive From Ie8

A client system (xp sp3, novell network, non-admin account) here is having issues saving documents from within ie8 to her assigned network drive. (I know more technical details for the network/setup may be warranted but for now i'm hoping someone has seen this or knows a fix based on this basic info).

None of her mapped network drives show up as possible save locations from within the ie8 "save as" dialogue. Her drives are  working fine otherwise; she can read, write, delete, etc. To them from windows explorer and other programs. There doesn't seem to be any further permission issues or drive mapping issues.

In this particular case, the file she wants saved is a pdf. Adobe acrobat is installed and works fine otherwise for viewing, saving pdf docs. The scholastic program she uses insists on launching the pdf from within ie8 when it generates reports for print/view.

Here's what else i know so far: when adobe is launched independently of ie, all of the network drives are available to save to. No issues here. This saving issue applies to all file types, not just pdfs (i tested with an mp3 file too). The pdf issue is just here at the forefront because of its tie-in with ie and the scholastic program that forces ie to handle the pdf.

Is seems to be an issue specific to this user's account permissions and ie8 only. - I installed firefox for testing purposes and from there i can save pdf and mp3 files to all network shares.
There are no settings within the scholastic software to tell it not to launch ie for it's pdf export feature. Even with firefox installed and set as default browser, it spawns an ie window. (Seriously, why would someone program that way?)

I have tried setting the url for the generated pdf to the "intranet zone" type in the security settings of ie. No change. I have confirmed that, as the domain admin, i can saved to these locations from within ie, again: the issue seems account and ie specific.

Clearly there are some work-arounds, but i'm looking for a solution and maybe a explanation to this behavior. A group policy issue? An ie issue? Both?


Posted On: 2009-12-18 . View Related Posts . . View 3 Replies .

Saving File To Last Save Location

In xp when i would "save as" a file ie. A pic from the web, the next time i would "save as" it would go to last location that i saved. Can this be done in windows 7 x64, if so how? It has done this but stopped not sure why?

Posted On: 2010-02-09 . View Related Posts . . View 2 Replies .

File And Data Saving To External Drive

I would like to save all my work direct to an external drive instead of main 'c' drive so that i do not loose any work and keep 'c' drive just for operating system and drivers etc.

Posted On: 2010-08-15 . View Related Posts . . View 4 Replies .

How Do I Stop Ie8 Saving Login Information?

Ie8 apparently automatically saves login details for saved sites without prompting the user if this is desired. The login details are saved and will be used if the original url is visited again so long as a t least one broswer windo has been open since the last visit.

For example
I log on to etrade www.Etrade.com and sign is with my userid

And password. I then open a second browser window www.Msn.com after checking account details on the etrade window i close it leaving the msn window still open. If i start the etrade url again, even a few days later, i am not prompted for login info just directed straight into account status. This will happen as long as i have at least one browser window open.

As soon as i close all the browser windows the cache is apparently cleared as i am prompted for user id and password if i open the url again. If i log out of the site before closing the account window the cache is apparently flushed for that url, however most people, myself included, would believe that just closing the window is the equivalent of logging off.


Posted On: 2009-09-28 . View Related Posts . . View 2 Replies .

Duplicate Photo Images Auto Saving

When saving photos into the my pictures library everything seems fine, then as soon as i view one of the jpeg images (with a number) it then creates 2 duplicate images - these are then identified as vcm_s_kf_m followed by numbers adn presume size of image. I do not want these duplicates, i don't know why they are created or what purpose they serve. Can someone explain what they are and how do i stop them occurring. When i go into my own personal file and locate pictures there are no duplicates there!?

Posted On: 2010-03-29 . View Related Posts . . View 2 Replies .

Saving Offline Files To A Seperate Partition

When i installed win7 on my vaio i created a separate partition for my data (d:) & reserved the smaller (40gb) c: partition for system files. When i activate offline files, it quickly fills the c partition as it is storing these offline files in the csc folder.

I followed all the advice i received in the folowing thread:

http://social. Answers.microsoft.com/forums/en-us/w7files/thread/6af0cf60-84f6-4e48-b0a1-2780a5fd7b7a
Without success. Apparently i'm not the only one having this probem. It still tells me that 'access is denied' when trying to delete csc folder.


Posted On: 2010-04-29 . View Related Posts . . View 2 Replies .

Saving Display Settings And Monitor Position

I currently am running two nvidia graphics cards with 4 displays. I have an 8800gtx running my primary and my tv in the other room. These two displays are cloned and used strictly as a primary display. I then am running a gt220 with my other two displays as extended desktops. One on the left of the primary and one on the right. I have the displays set up correctly and working in the display settings but when i restart, the extended monitors are not oriented to split the main screen. So i have to go back in to the display settings every time and change their positions. I have the latest nvidia drivers installed.

Once again

Extended - primary / primary - extended
 
(Gt220)      (8800gtx)           (gt220)

I just need a way to save this setup so that i dont have to change it every time i startup or restart. I wouldn't even mind if i could have a script that i could run on startup that would set it to these positions.


Posted On: 2010-01-29 . View Related Posts . . View 2 Replies .

Problem Saving Jpeg Files From Internet

I have been trying to save jpeg file (census image from ancestry.com) and it tells me it is saved on my desktop as i want. When i go to the desktop it isn't there, search facility doesn't find it. I go back to the image and try to save again and it tells me it is already on the desktop. I tried setting up a folder to save to but had the same problem, image says it is saved but it doesn't show and can't be found by search.

I can save images as an adobe and have no problems but i don't get the option to choose how it is saved, it is just as jpeg.


Posted On: 2010-01-20 . View Related Posts . . View 5 Replies .

Sound Only Comes On When Monitor Goes Into Power Saving Mode

Windows 7 ultimate on a gigabyte g33-ds2r mobo, no sound :(hi i wonder if anyone is having the same problem? I have tried everything i can think of, installing drivers from the dvd that came with the mobo, going to download the latest ones from gigabyte & realtek, but still no sound. Everything seems to be working correctly. Drivers are detected. No errors. In fact on my taskbar, my volume controls have that little green bar moving up and down. Nd i just noticed that when my computer's screen goes blank, there's sound its only when i press a key or move my mouse. It jumps back to the desktop that the sound disappears :(please help i am real close to buying a sound-card.

Posted On: 2010-08-11 . View Related Posts . . View 5 Replies .

Install Error 2329 And Saving Downloaded Files

Increasingly i have noticed repeated errors concerning file access on windows 7. While uninstalling a program, i will get the 2329 error halfway through, and also errors while trying to save downloaded files (i assume something to do with 0 length files), messages informing me that the file cannot be saved.

I believe that these two errors are connected, and are caused by the slow response of the os and anti-virus software, keeping handles to files open longer than is required, leading to these errors.

 Any thoughts?


Posted On: 2010-02-17 . View Related Posts . . View 2 Replies .

Internet Isn't Saving Usernames And Passwords

My computer has always saved my facebook logins and passwords so that whenever i went to the site, i would be signed in. It was the same for all of the message boards and emails i used. I checked all the settings, and made sure i checked all the boxes that say "keep me signed in" but they are no longer saving. As soon as i x out of the internet, and then get back on, go to the website, they aren't saved anymore and i have to re type them in along with my passwords.

Posted On: 2010-01-25 . View Related Posts . . View 2 Replies .

Problem Saving / Opening Files In Explorer & Programs

I have problem saving and opening files in windows explorer and third-party programs. I've been having this problem for a couple of months now and it's very annoying for example, when i use the snipping tool in windows 7 the files will not save so i have to take a print screen of that and open it with more software. Also, when i download files in firefox and other things, clicking 'open file location' does absolutely nothing. I assume these two issues are related as they started occurring around the same time.

Posted On: 2010-05-03 . View Related Posts . . View 4 Replies .

Saving Scan File As Date And Time Using Win 7 Fax And Scan

A friend has a brother 8840d all-in-one printer. He used to be able to use the scan function on the printer and send the scan in .jpg to the computer running xp with a unique name that had the date and time embedded in the name ie: 111709214200001.jpg.
 
He doesn't have the windows 7 driver to use the scan function as above but the windows 7 fax and scan viewer will let him scan. Question: is there a way to default win7 fax and scan to save a scan with a name similar to above that would have the date incorporated? I now saves it as img01, img02. I am still running xp so i don't have the ability to check.


Posted On: 2009-11-17 . View Related Posts . . View 2 Replies .

Ce Loading Os Image

I have a netbook that unfortunately i do not have the box anymore so i am not sure of the brand it doesn't say anything on it, but there is serial numbers and other numbers on but the problem is it is stuck. When we turn it on we get the screen that says microsoft windows ce and below that it says loading os image. And it won't go any further. I have tried pushing the reset button on the bottom and tried taking off the batter and none of them will work so i was hoping for a patch or something that i could download to a flash drive or sd card that would fix it, or maybe even a sequence of buttons that would reset it.

Posted On: 2010-06-23 . View Related Posts . . View 2 Replies .

Image Restore

I upgraded my hdd from 60gb to 320gb. With the extra room i thought that i would dual boot ubuntu. After days of not getting it to work, i decided to just restore from my backup image, and use only windows. However, to my dismay, when i went to restore from the image, it saw the image and gave some error saying that the image was not found at the location. So, being one to tinker, i moved the folder to another directory, and made an empty folder called windowsimagebackup. Of course windows still couldn't find an image, so i moved everything back. However, now windows saw no image even though it was there.

Anyway, now i'm stuck with the image (a collection of .zip files) and seemingly now way to restore it (also, the mediaid. Bin file was accidentally replaced with an older one [oops. ]). Is there a way to manually restore from the zip files? All the data is there, so it seems there should be a way. If i don't get everything back, then i'll lose ms office 2007, which is my main concern. I no longer have the disk or code for it.


Posted On: 2010-01-24 . View Related Posts . . View 2 Replies .

Recovery Of Disc Image

My desktop pc had a hard drive failure. Windows 7 home premium had been installed as an upgrade from win xp a couple of months ago. Here is my question - i have replaced the bad drive with the original drive still containing win xp. I can re-install win 7  home premium, but i also have a new and unused upgrade package of win 7 professional. Also, i have a disc image of my pre-crash win 7 home premium on an external hard drive. Which win 7 should i install (home premium or professional) and can i then recover the disc image, thereby saving the re-install of every program i had pre-crash?

Posted On: 2010-07-21 . View Related Posts . . View 4 Replies .

Failed System Image

I'm attempting to use the windows 7 back up and restore feature and get an error message during the creation of the system image:

     Windows backup encountered and error when accessing the remote shared folder. (0x8078015b)

     Additional information:
     The semaphore timeout period has expired. (0x80070079)

A backup without the system image works fine.


Posted On: 2010-01-05 . View Related Posts . . View 2 Replies .

Restore From System Image

I have a hard disk with two partitions, one for my windows 7 installation and one for my media files. I want to make a system image of my windows partition only using the backup and restore feature in windows 7 (a backup of the files on the media partition would require more space than i currently have).

If i create a system image of the windows partition only and use it to restore to the the same hard disk that windows is currently installed on (which also contains a partition with my media files), will i lose the files on the media partition?


Posted On: 2010-03-16 . View Related Posts . . View 6 Replies .

Using Ultimate Rc And Systems Image

I have the rc installed and got the software for the windows 7 professional. I know that i have to do a clean install but i want to know if i back up the systems image with the backup software supplied in the windows ultimate rc can i then after doing a clean install of windows 7 professional, restore the image and get all of the other programs and data that i have on the system? If not, then how? I should maybe include that i got the software for the windows 7 professional along with a disc from gateway with the applications and drivers for windows 7 on it.

Posted On: 2010-01-07 . View Related Posts . . View 3 Replies .