Bluetooth Mouse Dual Boot Pairing

I have a bluetooth mouse that i'm trying to get working under windows 7 and xp. It works fine in both systems except that i have to pair it again every time i switch oses. I had the same problem with a keyboard that was solved by selecting the same pin in both oses. Unfortunately, when i add the mouse in windows 7, i'm never asked for a pin. Is there a way i can force windows 7 to ask me for a pin? Or is there a way i can figure out what pin is auto-selected for me? I've searched the registry but can't find anything that looks like a pin.

In windows 7, i'm using the microsoft bluetooth drivers. Under xp, i'm using the toshiba stack. I've found the "link level security" option in the toshiba driver options so it asks me for a pin every time i try to pair (i select 0000 for the mouse). Is there anything similar in the windows 7 drivers from microsoft?

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.

Dual Boot - Mouse Not Working In Xp

Ok, i got windows 7 pro 64 installed and all seems real good with that. I did see the dual boot screen(s) which listed thus:"earlier versions of windows" "windows 7" when i go to xp through this menu, it takes me to another boot screen. It is my original os's with the choices:"windows xp professional" "windows xp professional (tune up back up. )" I 1st go into my main xp and see if all is well. Not! It went through the chkdsk process, and that usually is not a good sign.

When i got back to loading my main xp os, i find that suddenly my mouse does not work. I am not good and using the keyboard to move around in windows. After rebooting i did get to the device manager and it showed that the mouse was working. I tried to restore the tune up back up and it didn't change anything. I am now back in windows 7, and the mouse is ok. It is an usb logitech trackman wheel 2 button mouse, brand new. I have both ps/2and usb inputs on this motherboard.

Important: i did swap usb input locations. Worked fine in windows 7, but nada in xp. Is it a good guess to re-install the mouse drivers in xp? I will be shutting down completely tonight. So in the morning, i just may see it suddenly working. I seen stranger from windows :-). Does anyone have an idea or experienced a similar troubleshoot?

Posted On: 2010-05-30 . View Related Posts . . View 5 Replies .

Dual Boot Boot Problem After Resizing Win 7

Boot problem on dual boot after resizing windows 7 (32bit) switched from drive w: to drive g: i have a dual boot system that boots into win 7 (64) (c:drive) or win 7 (32) (w:drive). I needed to increase the size of win7 (64) drive and in order to do so i needed to move the win 7 (32) partition. Now i can still boot into win 7 (64) with no problem but when i boot into win 7 (32) it windows states that it is not a genuine copy and it is actually on drive "g:"! Anyway to change it back to "w:" because i believe this is the problem.

Posted On: 2010-05-24 . View Related Posts . . View 10 Replies .

Dual Boot - Move Boot Image To Second Drive

I have a problem with two different drives both running win7, one 32 the other drive64, on a dual boot system. I want to pull the win32 drive, but it also has my boot information for the win64 drive. When removed it will not boot. I have been working on this for 5-6 weeks. I want to remove the win7/32 and put the boot image of win7/64 on the second drive.

I booted from the win764 install dvd, and went to there pair your computer. The placethat displays the operating systems installed, none will show. I have tried bootsect from the command prompt. It seems to work, but tells me no partition on the second drive. Or on another attribute used, it can not find the path to the drive. I have tried rebuild bcd, fixmbr, etc.

Posted On: 2010-01-16 . View Related Posts . . View 5 Replies .

Dual Boot - 1 Xp And 3 Win 7 Boot Choices

I've installed win 7 on my d drive, with win xp still on c, with the idea of having a dual boot system. Due to installation problems, i now show the xp boot choice, and 3 win 7 boot choices, with only the most recent valid. How do i purge the b. Boot.ini doesn't appear to be relevant. Win 7 utility boot rewriter program to re-point boot to ntldr will wipe out all pointers to win 7 for booting, but comes back with an extra win 7 pointer, the next time i load win 7.

Posted On: 2009-11-10 . View Related Posts . . View 3 Replies .

Bluetooth Mouse Not Discovered After Upgrade

Bluetooth mouse not discovered after "upgrade" from xp to w7. I just "upgraded" from xp to w7 on dell laptop. The stowaway bluetooth mouse was immediately recognized and worked fine until the stowaway batteries were replaced and put into discover mode. The mouse still shows up as a system device but the discovery process doesn't see it. Any idea what's going on ?

Posted On: 2010-01-28 . View Related Posts . . View 3 Replies .

Problem With Microsoft Bluetooth Mouse

I'm running windows 7 64-bit pro on a sony vaio f series laptop with a microsoft 5000 bluetooth notebook mouse. Or at least i was. Right after i got the mouse i began having intermittent disconnect problems with it. It would stop working, i would disable it, re-connect it via the bluetooth interface, and we'd be fine for a day or two, then it would stop working again. Sony tech support was no help, suggested i contact microsoft since the mouse was remote-d into my machine but couldn't diagnose the cause, so they sent me a new mouse. That arrived last week, and worked fine for about six days, until this evening, when it totally quit.

I have tried the disconnect - reconnect again, changed the batteries, the bluetooth interface indicates it is there, but it doesn't move the cursor at all. Tried hooking up mouse number one, but same result nothing happening. Any know issues here or any suggestions? I have a webinar presentation coming up wednesday evening and really need the mouse for that.

Posted On: 2010-05-18 . View Related Posts . . View 2 Replies .

After Upgrade Bluetooth Mouse 5000 Did Not Work

Upgrade from win vita to win 7, bluetooth mouse 5000 did not work, req code for this mouse, can not find the code on this mouse.

Posted On: 2009-10-29 . View Related Posts . . View 2 Replies .

Ms Bluetooth Mouse 5000 Can't Connect

Ms bluetooth mouse 5000 can't connect after upgrading to windows 7 asking me the pairing number which i dont have or the mouse dont have it was perfectly working when i was using vista. How to connect ms bluetooth notebook mouse 5000 to windows 7. Its asking me tha pairing code thanks.

Posted On: 2010-02-15 . View Related Posts . . View 2 Replies .

Bluetooth Mouse Fails After Sleep Mode

My logitech bluetooth mouse looses communication after coming out of standby mode. The mouse does not show up in the devices panel and will not resync. To get it back i have to reboot, then remove the bluetooth mouse from the devices panel and then add the device again. When win7 was installed, it recognized the mouse without the need to manually supply drivers. I checked the logitech site which does not have win7 drivers available for download.

The issue is not limited to the mouse as a bluetooth speaker system has similar problems with standby mode. Anyone know how to solve the bluetooth standby issues on win7? System: dell m1330 laptop, logitech v470 bluetooth mouse, win7-64 home premium

Posted On: 2009-12-25 . View Related Posts . . View 2 Replies .

Dual Boot - Can't See Win 7 Drive After Removing Other Boot Drive

My mobo (msi p7n diamond 780i sli / 570i sli) has a sata raid controller providing 6 sata interfaces
These are organized thus.

Sata 1 - [partition 1 - windows xp] [partition 2 - windows 7 beta (64bit)]
Sata 2 - ocz vertex - windows 7 home (64bit) retail version
Sata 3 - mirror a
Sata 4 - mirror b
Sata 5 - mirror a
Sata 6 - mirror b

The system was originally running xp on sata 1. I added a partition to sata 1 and installed windows 7 beta some weeks ago. The system dual booted to xp or win 7 beta fine. I then added the ocz vertex drive and installed the win 7 retail version, and i am able to dual boot to all three systems just fine.

However - i really want to do away with the xp and win 7 beta partitions and just run with the ocz drive. However if i disconnect the drive from sata 1 the system will not boot up. Can't find ntldr or bootmgr or something similar. I have changed the boot sequence in the bios to point at just the ocz drive - but it just won't boot from it.

Posted On: 2009-11-12 . View Related Posts . . View 5 Replies .

Ms Bluetooth Notebook Mouse 5000 Doesn't Work

I have notebook dell vostro 1510 with internal bluetooth adapter. My microsoft bluetooth notebook mouse 5000 works fine in os windows xp sp3. Now i install windows 7 and mouse doesn't work at all. When i switch on the mouse comes window asking a pairing code for device and mouse recognized correctly as "microsoft bluetooth notebook mouse 5000". I enter 0000 and then comes error:"adding the device failed resulting in an unknown error. The reported error code is 0x80007048f. " And mouse doesn't appear in devices and printers window.

Computer contains dell wireless 360 bluetooth module (hardware id: usbvid_413c&pid_8140&rev_4870) with preinstalled generic bluetooth adapter driver from microsoft.

Posted On: 2010-03-13 . View Related Posts . . View 6 Replies .

How To Disable Back Button On Microsoft Bluetooth Mouse 5000?

How can i disable the back button on my microsoft bluetooth mouse 5000? I have the microsoft bluetooth mouse 5000. It works great and i love how much longer the battery life is with bluetooth over other usb wireless mice. One issue that i am having is that i keep accidentally hitting the back button unintentionally. This happens often when i am filling out long forms on websites, and i lose all the information i have already typed when i hit this button.

I have tried the intellipoint software, and there is no entry for the "bluetooth mouse 5000. " I have tried selecting other models, but there are none that work exactly right without causing some other undesired side effect. Is it even possible to disable the back button on this mouse? Is there any chance microsoft would ever develop drivers to include in the intellipoint package?

Posted On: 2010-07-31 . View Related Posts . . View 2 Replies .

Dual Boot

I am currently running windows xp and need to upgrade for school. My computer has a 120 gb harddrive split into two partitions. Can i use the other partition that xp is not on to install and run windows 7? My primary drive is listed as os c: and the other one is listed as data d:. My system is as follows:

Emachine el 1200-01e. I meet all the system requirements except for the ram, which i will be upgrading anyway. Will it be better to buy a new computer if i can't install windows 7 on the other partition or should i perform a clean install? The clean install worries me a bit because i can't be without a computer very long as it is needed for online schooling.

Posted On: 2010-01-23 . View Related Posts . . View 2 Replies .

Dual Boot Two Drives

I have installed windows 7 64-bit on a new hdd, and i have vista home premium 32-bit on another hdd. Can i dual boot these two drives as they stand and how. With windows 7 64-bit installed on one drive and registered, i have windows vista home premium 32-bit on the next drive and registered, i find a couple of programmes will not run properly on the windows 7 system. So i unplug the windows 7 system and run vista, what i want to know is can i install windows 7 32-bit as a clean install on the vista hdd. Fter re formatting the drive and then making this a dual boot system.

Posted On: 2009-11-04 . View Related Posts . . View 2 Replies .

Create A Dual 7/xp Boot

Is there a way to create a dual 7/xp boot? I have a dell xp system with a relative small and relative full hard drive. I'll probably have to upgrade to a new pc with win 7 in the near future. I have a number of programs that have upgrades upon upgrades (mostly downloaded) and i'm seeing a ton of work in my future. So i've seen some virtualization possibilities (e.g. Zinstall xp7) but is there a way to create a dual 7/xp boot by just installing - as a second drive - my existing drive into a win 7 machine. Don't know if it matters but there is a hidden small partition on that drive as well as the main c partition by the way, in case it's not obvious, i'm definitely not a hardware person.

Posted On: 2010-07-11 . View Related Posts . . View 5 Replies .

Dual Boot Ghosts

I installed windows 7 on a machine that had been running xp using the custom install. Everything went well with the installation and the system seems to run fine. However, at startup i'm prompted to select an os to boot from (windows 7 or "earlier version of windows") which is annoying at best. If earlier version of windows is selected it can't/won't boot and simply goes back to windows 7. Only a single partition shows up in the disk manager, and i'm pretty sure there isn't any other installations of windows left on the machine. I've tried rebuilding the bcd, but when running bootrec.exe/rebuild bcd it indicates number of os found = 0.

Can anyone suggest a way to stop the system from asking me which os i want to boot to?

Posted On: 2010-02-08 . View Related Posts . . View 2 Replies .

Turn Off Dual Boot

I have a created a system using windows 7 64-bit and windows xp professional. My c drive is the win 7 while the d drive is the old windows xp. I am ready to abandon windows xp and go with windows 7 only. My c drive is a sata drive while my d drive is an old pata drive. I wish to disable windows xp and format the d drive.

In disk management, my windows 7 disk is disk 2/drive c: with boot, page file, crash dump and primary partition. My windows xp disk is listed as disk 0/drive d with system, active and primary partition

Since the boot info is on the windows 7, could i just take the d drive out of the system without any problems? Is there a way to tell the boot to ignore the d drive as a drive with an operating system on it before i remove the d drive?

Posted On: 2010-04-14 . View Related Posts . . View 4 Replies .

Lost Ability To Dual Boot Into Xp

After formatting my vista drive and installing windows 7, i lost my ability to dual-boot into xp. How do i restore that dual boot option? I was previously running a dual-boot for vista and xp. Yesterday, i formatted my c: drive (vista) and installed windows 7 onto it, and now i can't boot into xp. I now understand that in doing that i erased the old boot loader. How do i modify the boot loader to allow me to boot to xp?

Posted On: 2009-10-19 . View Related Posts . . View 8 Replies .

Dual Boot With Xp And Network Printers

Win 7 64 bit dual boot with xp pro & d-link dir -655 cannot find network printers. Have logged into dir-655 and it will not hook up to printers. Does have internet connection. Printers are plugged into router. Amazingly finds an old hp 1220c (12 years old!) Which is connected directly to computer. Have attempted to download drivers to "ghost" drive, does not recognize os.

Purpose of 64 bit is for bim files from autocad and vico. Nvida 9600 installed and drivers are available for it. You folks will chuckle at one problem with multiple monitors, cannot renumber them, thus to use win 7 i reverse positions on desk (not desktop) physically so mouse will move from left to right.

Posted On: 2009-05-20 . View Related Posts . . View 4 Replies .

Dual Boot Win7 And Xp On An Ssd

How do i dual boot win7 & xp on an ssd while keeping programs intact? S the title says i'm trying to have a computer that will dual boot win7 ultimate x64 and winxp pro x86 onto a ssd that is 64 gb. Then i would like to have my favorite 2 games installed on the win7 partition but all other programs be installed onto a 600 gb hard drive. I was able to get a selection after reading around. I first installed xp then installed win 7 but windows 7 overtook the c drive for xp so it was all mixed up. I want 2 partitions. But i was wondering is their a way to do this.

Maybe i should install win7 first then xp. I'm so exhausted on this and fed up with it that i'm about to return win7. I used diskpart to shrink the win xp partition b4 i installed win7 then rebooted and installed win7 using it's "custom" selection to install on the other partition but i ended up with the same results. Then i tried formatting the whole 64 gb ssd and then installing winxp pro on the whole drive.

Then i used magic partition to shrink the xp partition to 15gb . Then i made a "primary" 45 gb partition. And them made it active. Then rebooted to finalize that action. Then i installed win7 on the 45 gb partition and went to restart the computer and their was no windows boot mngr. Downloaded easy bcd to see what was up and it only saw one record of a o/s. If you have any ideas i would greatly appreciate it. For i am at a lost on this great idea i had.

Posted On: 2010-07-14 . View Related Posts . . View 2 Replies .

Dual Boot With Win7 And Vista

After a week of trying to recover a vista system, which was an upgrade to a previous xp pro install, i installed win 7 ultimate 32 on a separate drive (with the vista drive disconnected). And it is running ok. Subsequently, i was finally able to get the vista ultimate 32 drive working, with the win 7 drive disconnected. So, i now have two different sata drives, that will boot, one to win 7, and one to vista. Because i have a legacy scsi scanner and card that will not work in win 7, i would like to keep the vista system, with all my original files and email archives intact, until i can decide to replace the scanner with newer equipment. I have read the faq's about the pro's and con's of a dual boot system, but still have some questions.

If i continue to use the two separate drives, and use the f8 boot selection function of my asus mb to determine which system i want to run, do i have to worry about either system, overwriting any boot or configuration files on the other system drive. I am assuming that because each system was installed without the other drive enabled during the install, that no system files were impacted.

Each drive boots and the system appears to work well on its own. But, as of now, i have been physically disconnecting the opposite drive than the one i wish to boot to. If i were to leave both drives connected, and used the mb f8 boot option to select the boot drive i want, will i be safe?

Posted On: 2010-01-20 . View Related Posts . . View 2 Replies .

Upgrading From Dual Boot - Xp And Beta

I have a dual boot computer with 2 hard drives. I loaded windows 7 beta on one of them and xp on the other. I had a few legal xp disks because my laptop died and so did another computer. I believe i loaded a different copy of xp on each hard drive and then upgraded one of the with the demo version of windows 7 beta.

If i purchase a windows 7 upgrade, can i then load it on the beta7 hard drive and keep my other hard drive with xp? Or would i need to dig out the original xp disk and reload it on the beta 7 and then do the upgrade?

I do not care if i have to do a clean install on the beta 7 drive since i don't have anything important, but i do have important stuff on my xp drive and i do not want to be out of commission while i reload all my applications.

Posted On: 2010-01-03 . View Related Posts . . View 7 Replies .

Use Easybcd 2.0 For Dual Boot Systems

My frustration with changing a xp / xp dual boot to a windows 7 / xp boot was solved in 30 seconds with easybcd 2. 0. Perhaps i missed the referemce to a specific level of easybcd? This is a beta version so one needs to register (it's free) at the neosmart site to do the download. This version supports an option, when you have pre vista os partitions, to automatically create the needed boot.ini and copy the required ntldr and files to the root of the win 7 partition! Just say accept to the prompt offered.

So if you have dual boot issues my recommendation is to look on the neosmart site and forum areas and download the beta level.

Finally a happy camper you can now proceed to play with win 7 while still having my old xp friend around.

Posted On: 2010-02-20 . View Related Posts . . View 4 Replies .

Install Win 7 Dual Boot Xp

I have downloaded 7 ultimate; attemting to install from within xp gives error no drive space for temp install files (there is >60 gb on both partitions of my hp notebook drive. When install from dvd (i own win7 pro) i choose custom and select the correct partition but when win7 starts it has claimed it's partition as c (it had been d) so if i boot into xp programs don't work because the drive is now d and their registry entries are for c which win 7 claimed. I have gotten the impression from some forums that if win7 setup is started within xp this might not be a problem but that always leads to the error above.

Posted On: 2010-04-05 . View Related Posts . . View 2 Replies .

Dual Boot Licensing Questions

I wish to install a dual boot of windows xp and 7 on an older laptop. I'm doing this for two reasons. I have software that needs xp, and i'm not sure 7 will even work well on this laptop (yes, i ran the advisor but others have had mixed results installing 7 on this machine). The xp is the oem install on purchase cd's i bought with the laptop. The 7 is an upgrade version i bought from staples. Ok, is this possible with these versions or do i have to have full versions (which i can't afford on a $250 laptop)? If not, i will have to make a difficult choice.

Next, since i will then have two installs of the same office 2007 and others (one for each os, right?) Is that allowed since it's on the same laptop, or do i need 2 licenses too? I'd like to try this but want to be "legal" and sure it will work before starting. I did search for answers but found nothing definitive on either.

Posted On: 2010-01-08 . View Related Posts . . View 2 Replies .

Dual Boot Win 7 Pro 64 With Xp

Have a dual boot xp 32 bit system. C: has the boot.ini with partition(1) pointing to c: and partition(2) pointing to drive letter f: [some old history there. ] There were installed from a xp full cd oem on the system i build 2 years ago. Line of the system should be another 3 years. What to go to windows 7 64 bit on c: and leave the existing xp 32 biton partition(2), the f: drive letter.

Have read a number of posts here, learning two things:
(1) buy a full windows 7 64 bitcd (have an oem cd on order)
(2) have downloaded easybcd if needed.

I desire two things in the change:
(1) a clean install of window 7 on c: with no need to go back to xp
(2) retain the dual boot so i can get to anxp os if needed on f:

I've seen that some windows 7 install path generate a folder or partition used for going back. I really don't desire this. So my question is how to achieve what i want- (a) should i just boot my system with the full oem win 7 cd in and my system with the bios set to boot from the cd drive first? (B) or do i start, as i've seen in some posts, the existing xp on c:, insert the full oem win 7 cd and then restart my system? My last comment, somewhat off the main topic is: install the os builds i've done in the past for 10 years since windows 95 (98se, xp) i needed to do at least 2 passes to get all the mb updates (current mb is asus p5k-vm) and desired software installed with no or very few errors. So i expect at least 2 passes at the win 7 install based on past experiences.

Posted On: 2010-02-08 . View Related Posts . . View 2 Replies .

Dual Monitors Mouse Pointer Problem

Windows 7.nvidia geoforce 8500 gt. I have the latest nvidia drivers and control panel. I have two monitors; 1 on left, 2 on right. I have no trouble setting them up, but the indicated physical position on the computer is reversed; ie monitor 2 is on left, monitor 1 is on right. The problem is that i want the mouse pointer to move to the right to get from from 1 to 2. As it is.

If i am on monitor 1 (physically on left) i have to move my pointer to the left to get on the right monitor (monitor 2). This is opposite of what logic calls for. I have jiggled my cables every way i can think of, to no avail.

Posted On: 2010-02-02 . View Related Posts . . View 2 Replies .

Dual Boot Drives Or Hot Swap

I have been using w7 64bit for a few months now and it is awesome, i love it. However my issue is this, i work with video and i have found my expensive editing program and the more expensive io box are both incompatible. The manufacturer has now announced "end of life" on the program and offered a fantastic deal on a new upgrade 80% off. Sounds pretty good, except the necessary io box is only sold at full price $3k.

So i'm thinking, can i use my old xp pro 32 bit drive in a multi-boot set up or is it better to go with a hot swap set up? I would have to leave the external capture and render hd's alone and just change the "c" drive which would only contain windows and the editing program.

Posted On: 2010-04-08 . View Related Posts . . View 2 Replies .

Win 7 / Vista Dual Boot Issue

I have a dual boot system with vista on main drive and acts as the default os (c:). I have a secondary hdd (g:) and it has windows 7 home premium installed. Everything was working perfect- the vista boot manager let me choose which os to boot every time i restarted. This past weekend, i reformatted and reinstalled vista on the main drive. Now, the boot manager does not show up- it boots automatically to vista. I got to winre and it was able to find the win 7 installation and tried to repair the startup.

Now the boot manager does come up on restart, but it says windows 7 (recovered) and errors out and wont boot to 7 when i select that option. I tried repeating the winre startup recovery several times and no luck. I don't know if this would matter, but when i was able to boot 7, the hdd with win 7 on it was listed as c: when using 7, but when i use vista, that same drive is listed as g:. I appreciate any help anyone may provide.

Posted On: 2010-02-03 . View Related Posts . . View 4 Replies .