Advertisements:




Samsung External Dvd Se-s084c Driver Issue


Samsung external dvd se-s084c worked fine with my win 7 machine (acer timeline as3810t) for a month or so. Then suddenly system stopped recognizing it. Troubleshoot found that driver service is disabled. I was unable to enable it, even if i went through disable-enable and remove-install routines as suggested on microsoft site. Recommended action was to update the driver. However, when i run update driver service, win troubleshooter claims that driver is up to date and no action is needed. Anyone has idea what to do and how to enable the driver on my machine?I suspect that driver stooped functioning after one of win 7 regular on-line updates, but i cannot tell which one. Se-s084c works without problem with my old laptop running win xp.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Samsung Ml-1610 Driver For Win7

I just buy an lase printer samsung ml-1610, i try to install drivers for printer, vista, xp, win 98, 2000, all range, no one is working with windows 7, my printer does not work. Where i can find a driver for this printer? On the website of samsung i did not find any driver to work it out with  windows 7. I also setup to run compatibility option to be compatible with all operating system from windows and no one want to work it, in administrator mode too, no result.

I try the printer on xp, vista and win 98 and is work but not under windows 7. What can i do? I don't want to use xp, vista, i want to use the printer on windows 7 and i must find an driver to work with windows 7. Does exist any setup to make it work on windows 7 the printer samsung ml-1610?
The picture of the erro (print screen) you can see at: http://www.Flickr.com/photos/33493691@n02/?Saved=1 please don't send me at samsung drivers webpage, they don't have an solution for this issue!


Posted On: 2009-10-01 . View Related Posts . . View 5 Replies .

Samsung Ml-2150 Printer Driver Problem

Win7-64 won't install samsung ml-2150 series 64-bit printer driver to that printer on ethernet; keeps trying to install on usb.

1. New win7-64bit installation.
2. Samsung ml-2151n printer ; correct 64bit ml-2150 downloaded from samsung.com
3. Printer connected to the win7 cpu via usb: driver installs and printer works fine
4. Printer's nic on the ethernet lan (which always worked on winxp32bit) is found by browser on the win7 computer and will print a test page or otherwise control the printer as would be normal.
5. However, win 7 doesn't show the network printer in the printers/devices window
6. Add printer doesn't work; reverts to the driver that operates only via usb (grayed out when the usb cable is unplugged, which is how i'm trying to set things up).
7. Add port adds the tcp/ip port name of the printer in hex, as shown in the printer's test page printout.
8. Add printer still doesn't work.
9. Samsung won't support me since the printer is out of warranty (duh, it works fine for past 6 years, it's their stupid driver, or what?). They consider installing an old printer on a new os using their newly published driver to be a warranty issue that they won't support. Huh?
10.network is "trusted". Subnet is the same. No difference if win7 is running as homegroup or workgroup. Norton internet security is installed and doesn't give error message; see #4, above.

My question: how do i install and run this beast as a network printer so i can move it out of my office?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .

Samsung Ml-1430 Printer Driver Software Wont Install

Samsung ml-1430 printer driver win7x64 software won't install; can't find working driver-same with samsung dvd r/w. I quite vista (32 bit) when i had an infinity of problems getting hardware and software to work (goodbye to all that $$$), now i've tried win7x64 bit and i have worse problems!  I'm getting tired of this. I may junk it all and just install xp (again) after another ms or samsung failure to make sure hardware and sw works.

I can't figure out how to make the compatibility mode work and so much more won't work. I have a 3 ghz core 2 duo e8500, 4 gigs of memory, sata ii 500 gb hard drives, decent 8800 gt's video, so it's not a slow system. I just don't get it. If i could run rfactor on a mac i would get one just to avoid the last 3 years of headaches.


Posted On: 2010-06-30 . View Related Posts . . View 2 Replies .

Win 7 Asking For Dvd Driver, But It's Already Seeing Dvd Drive

Windows 7 asking for dvd driver, but it's already seeing the dvd drive. I am installing windows 7 pro on a dual xeon 5500 motherboard by supermicro. I have built a raid 1 array from embedded bios applications. Windows starts to install , after i enter the country english etc it gives me an
Error message saying "windows needs the dvd drive driver", but windows already sees the dvd drive. Is it really asking for raid drivers? When will it ask for raid drivers? In what form will it want the drivers (there is no floppy port on this motherboard.


Posted On: 2010-03-01 . View Related Posts . . View 3 Replies .

Laptop Does Not Recognise External Usb Dvd Drive

My laptop does not recognize the built-in dvd or an external usb dvd drive. But if i configure the bios to let the laptop booting from the dvd drive then the dvd drive worked fine. It could read the disc. One time, i removed nero program from the system and i don't know whether some windows files got corrupted.

Posted On: 2010-03-31 . View Related Posts . . View 2 Replies .

External Hdd And Dvd Drive Loose Usb Connection

I just bought an acer aspire asa3810tz with windows 7 pre-installed. In addition i have an external hdd (wd 500 gb) and a iomega superslim dvd usb drive. When i plug them in they are recognized, and i can sometime use them for a while, but then suddenly the connection is lost.

I have searched every where for a solution, but the solutions i have found so far was about nvidia chipsets and making sure that the computer was not allowed to turn off the usb ports. Nothing have though help.

I have tried updating windows until no more updates were available and updated drivers based on drivers from acers support pages but so far with no luck. In case there is other solutions out there, then please just point me to them and i will try them out.

I also saw an answer in which it was requested to create a log and so i did hoping i could use it, but unfortunately i did not understand it. In case someone can uses that usb trace i also put it on skydrive: http://cid-d6ee7fade4f53730. Skydrive.live.com/browse.aspx/. Public


Posted On: 2009-12-09 . View Related Posts . . View 6 Replies .

Cd/dvd Player Or External Hard Drives Don't Stop Running

My camera displays images upside down after upgrading to windows 7 64bit and cd/dvd player or external hard drives don't stop running after quitting attempted access. I have an asus g50vt-x1 laptop that is a 64-bit machine. It had windows vista home premium 64bit installed on it and the camera worked properly with it.

I ran the windows 7 update advisory on it and it said i could upgrade to windows 7 64bit. After upgrading to windows 7 professional 64 bit the camera images are all upside down. I have contacted asus about the problem and they have sent me updated drivers, but the images are still upside down.could windows 7 be causing this problem as i know it worked fine in vista?

I have also noticed that my dvd/cd drive and external hard drives don't stop running after i exit an application. When this happens i can't eject the dvd/cd or safely remove the drive from the computer.


Posted On: 2010-01-01 . View Related Posts . . View 2 Replies .

Load Driver - A Required Cd/dvd Drive Driver Is Missing

I tried to do fresh install of windows 7 ultimate 64 bit version (pls don't recommend 32 bit, as 64 bit support is the main reason for me to switch to win7) on my home pc and installer is requesting for additional driver. I've seen similar problems in other forum threads, however responses does not really help me.

My hw configuration is:
Msi p35 platinum + q6600 + 4 gb ram + few sata hdds + nvidia geforse 9800 gtx, i've downloaded all latest drivers from msi site. I even manage to extract drivers, which require installation (such as all inf drivers, etc). However, windows installer is rejecting all drivers (it allows to select driver but throwing "no new driver found" message after i press "next" button).

So, here is summary of my biggest frustration:
1. Why windows 7 installer rejects all latest drivers?
2. Why windows 7 upgrade advisor is saying that all devices on my computer are windows 7 compatible (on 64 bit report)
3. Why windows 7 installer does not mention device which requires new driver?
4. If microsoft is planning to run qa on its customers i'd like to get my fees!


Posted On: 2009-11-01 . View Related Posts . . View 6 Replies .

Code 28 - Missing Driver For External Hdd

If anyone could assist me with the following problem i would be grateful recently purchased a western digital elements portable external hdd and when i went to "plug and play" i got the code 28 error saying there was no driver for the device. I am running windows 7 home premium on my laptop which has given the error code 28, when i put the external hdd on my desktop which runs windows xp, no problems.
The external hdd shows is acknowledged within the laptop, just can't use it because of lack of driver.contacted western digital who state that they don't supply drivers with the device as it should operate straight away on my os with the drivers contained therein. Can anyone assist, please?


Posted On: 2010-04-17 . View Related Posts . . View 5 Replies .

Simpletech Pininfarina External Hard Drive Driver Not Found

I have a 500 gb simpletech pininfarina external hard drive, the product number on the back says bom no: 96300-41001-013. I just bought a new laptop with windows 7 and the laptop doesn't detect the hard drive. It says the driver could not be installed and i should try downloading the driver from the manufacturers website. The manufacturers website does not have the driver on there and i have a lot of my sensitive data stored on this external hard drive. Is there any way i can find the driver elsewhere? If someone has the driver or knows of a public forum where this driver is downloadable then please respond to my post.

Posted On: 2009-12-11 . View Related Posts . . View 2 Replies .

Upgrade Issue With Dvd-ram Driver Software/bd Driver Software

Unable to find the following: dvd-ram driver software/bd driver software. The following issues are preventing windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue.

For these items, make the following changes:

Uninstall these programs. Open control panel and search for "uninstall a program".

Dvd-ram driver software/bd driver software.


Posted On: 2010-01-18 . View Related Posts . . View 2 Replies .

Missing Cd/dvd Device Driver

Win7 x64 boot disk results in "missing cd/dvd device driver ("a required cd/dvd drive device driver is missing)". I'm doing a full install (custom) of windows 7 from a nec3520a cd/dvd and a dvd burned from the downloaded (twice) student file for windows 7 x64.

I am unable to get past the point of having "no apparent" driver for my dvd. As stated earlier, after i click "install" on initial screen (this is after the "loading files" screen which runs for a couple of minutes loading win7 files), i get an error screen saying "missing cd/dvd drive driver", then directions to install a disk/dvd/whatever with the driver.

If i just click next, it looks for a driver, doesn't find it, and then offers me a selection menu for different drivers( all of which are blank, there are no drivers listed). I then have an option to "rescan" for updated hardware, i suppose, or "browse" to go find the driver.

I have, and can't get any sort of driver for my nec3520, which i've been using for a couple of years now; it's supported directly by windows built-in drivers. Nec doesn't even provide a driver, for 32 or 64 or anything. I suppose this whole thing has to do with my "custom" install from a bootable dvd of the x64 version, but i can't find any way to get around it.


Posted On: 2009-11-05 . View Related Posts . . View 7 Replies .

Cd/dvd Driver Not Recognized On Win 7

I received a new dell inspiron for christmas with windows 7 and the dvd/cd drive is apparently nonexistent in the software. When placing any disc in the drive it sounds like it is trying to read it, then stops. Under computer , d: is not even listed. Only c: now, on occasion, the computer will recognize the drive and it will work just fine, but not today, and i'm tired of working around that random chance. I attempted to reinstall it, as per the microsoft website instructions, and the drive is not even listed under device manager as the website led me to believe it would be.

Now, disc drives is, but there is no such option upon expanding or right-clicking to uninstall anything, nor does anything under disc drives seem remotely similar to what the website made me think dvd/cd rom drives would look like. So that's my problem. I would just call customer support, but that, uh, costs 60 dollars.


Posted On: 2010-01-02 . View Related Posts . . View 2 Replies .

Driver Tsst Dvd Player

Recently when i try to use my internal tsst dvd-rw player, i receive a code 10 stating driver is missing, can not start the player. It was installed at the factory by dell, but the driver is not located on their re-install cd and it is virtually impossible to get the driver from tsst corp. Website. Were can i get this driver from or should i use the repair program within windows 7?

I tried the uninstall/ boot off/ re-boot to recognize the player, but it is not listed in my computer and my device manager shows a yellow question mark for the player. I tried the updated driver program, but it says the current driver is ok, which is totally incorrect. The dvd player is operational, as i have a dual boot system with linux installed via a separate partition and it works perfectly in linux.


Posted On: 2010-06-03 . View Related Posts . . View 6 Replies .

Samsung C630 Tv As Monitor

I just bought a samsung 32" 630 series 780p tv. It has a pc port built in. Will it be an adequate "large" monitor for ms flight sim gold?  Vista os.

Posted On: 2009-07-15 . View Related Posts . . View 2 Replies .

Code 39 - Corrupt Driver Dvd-ram

I recently was trying to get a camcorder to work with my new win 7 pc. The cam device allows a web cam configuration via usb but a video capture driver must be installed. This driver would not install on win 7. I tried installing the device in xp sp3 mode by using the compatibility option in the properties of the .exe file while the file was on the cd. This still gave the error.

The capture will not work. Now though my dvd drive will not work either. I tried disabling it, unistalling it and each time the driver installs the same way and gives the code 39 error. I also connected a usb dvd drive and it show the very same error. The dvd drives show a yellow triangle in device manager now and neither show in my computer. I have tried reboot with out the device then boot again with a drive (either) and it always has code 39. What can i do now?I have a ghost image but i would rather find a solution incase it happens again.


Posted On: 2010-07-19 . View Related Posts . . View 2 Replies .

Samsung Ml-1710 Printer With 64-bit

I just received a new computer with windows 7 64-bit. I installed my samsung ml-1710 laser printer using the "windows 7" driver on the samsung website, as recommended by microsoft. After doing so, i was able to print the test page, and all networked windows xp machines print with no problems.

The problem is that my windows 7 machine, to which the printer is connected via usb, will print the first time, but i have to cycle the ac on the printer to print additional documents. Anything after the first document just sits in the print queue for a few minutes and then disappears.

I'm relatively sure this is a samsung driver problem. Has anyone encountered or worked around this?


Posted On: 2010-02-14 . View Related Posts . . View 9 Replies .

Bsod After Connecting Samsung Syncmaster Tv

My computer crashes anywhere between 5-7 times a day. I am running an inspiron 1525 laptop
4 gb ram, 2. 4ghz processor (duel). I currently have windows 7 installed. I have been having this problem for the last 2 months. Before you assume its a virus or anything of that sort, let me promise you its not. I have a bsod log that is a mile long, and i have tried my best to debug and figure out the problem. I cant. My computer is connected into a samsung syncmaster t260hd tv. The problem began once i began using this tv/pc monitor.

I have narrowed the problem down to the monitor. Whenever its plugged in and i am watching a video on my pc through the internet, the computer will randomly crash. It happens every once and a while when i am not watching a movie, but at a ratio of 9:1. This is not a problem with dells hardware. Nothing is broken. All drivers are up-to-date. I am tech-savy enough to have tried every update from dell, intel, microsoft, and samsung.


Posted On: 2010-03-31 . View Related Posts . . View 2 Replies .

A Required Cd/dvd Drive Device Driver Is Missing

When installing: missing cd/dvd device driver ("a required cd/dvd drive device driver is missing). I keep getting this on the install screen with the digital river home iso install. Any work around?

Posted On: 2009-10-25 . View Related Posts . . View 65 Replies .

Required Cd/dvd Drive Device Driver Is Missing

Cannot install windows 7 64bit dvd from boot (a required cd/dvd drive device driver is missing". I have a unmodified gateway computer model gm5632e utilizing the g33 express chipset from intel. I purchased windows 7 64-bit from a store and tried installing it. Every time i get to the setup it gives the generic error: "load driver, a required cd/dvd drive. Device driver is missing". I cant get anywhere else in the setup. I understand that there may be an issue with the sata drivers. I am also sure im not the only one with this problem. Any help is much much appreciated.

Posted On: 2010-06-09 . View Related Posts . . View 2 Replies .

Custom Install - Cd/dvd Device Driver Is Missing

I am doing a custom install in windows 7. After clicking on install i get a message, a required cd/dvd device driver is missing. How can i resolve this problem?

Posted On: 2009-11-18 . View Related Posts . . View 2 Replies .

Win 7 Install Can't Find The Cd/dvd Driver

I just built a custom computer, and i have a legit copy and code for vista 64bit. I'm trying to install vista, but when it reaches the second step, i get a message that it can't find the cd/dvd driver (it's actually a blu-ray player/dvd re-writable). Here's what it says: "a required cd/dvd drive device driver is missing. If you have a driver floppy disk, cd, dvd, or usb flash drive, please insert it now. " I've been browing but for the life of me i can't find it. Please help! I have an onboard dvdcd burner not usb. I have gone to the dell website the do not have any drivers for vista or windows 7 i have a dell 670

Posted On: 2009-10-12 . View Related Posts . . View 2 Replies .

Error During Install - Required Cd/dvd Driver Is Missing

I got a licensed copy of windows 7 ultimate last year from microsoft academic alliance but it was an rc version. Now it gave popup message that windows will expire so backup your data. So i downloaded windows 7 professional from same website at my university. It doesn't install while running existing windows. When i boot through the disc, setup starts loading files but after loading when i click next, it gives an error message " a required cd/dvd driver is missing. If you have a driver floppy disk, cd, dvd, or usb flash drive, please insert it now. "

I have a hp pavillion laptop with matshita dvd writer. Please help me what to do as i didn't find any driver.


Posted On: 2010-03-14 . View Related Posts . . View 2 Replies .

Compaq Presario 7100 Cd/dvd Driver Is Missing

I just installed the windows 7 ultimate 64 bit into my laptop yesterday. My laptop will not read the cd/dvd driver and when i tried to install the drivers on it. I noticed a yellow caution sign on it and it would not update the driver. I have tried everything i've read on your forums so far and nothing seems to work. Can you please help me out. It is getting me very frustrated and i would love to continue to work with windows 7 because i think other then that its great. I have a compaq pesario 7100.

Posted On: 2010-01-31 . View Related Posts . . View 2 Replies .

Samsung Wep500 Bluetooth Headset Drivers

Trying to get samsung wep500 blue-tooth headset to work with windows 7 , pls provide link to drivers and getting it to work. Been trying to get bluetooth samsung wep500 to work with windows 7 anyone can advise?

Posted On: 2010-03-29 . View Related Posts . . View 2 Replies .

Error - A Required Cd/dvd Drive Device Driver Is Missing

Windows 7 upgrade ultimate 64bit from windows vista home premium 64bit - error with "a required cd/dvd drive device driver is missing. I can see many posts for this problem, but the different solutions all confuse me. I am not a pc techie. I was trying to run windows 7 64bit ultimate upgrade from windows vista 64bit home premium on my pc. Before i ran windows 7 upgrade using the 64bit disk i bought from a retailer in sheffield england, i checked on the microsoft website and downloaded windows upgrade advisor.

This reported a number of minor issues, which i dealt with. It did not report any issue with my motherboard or cd/dvd device. I also downloaded easy transfer, but as i had recently rebuilt my pc i did not have many files to copy over so i have not yet used it. I have now rolled back the install, after getting very frustrated trying to obtain the "driver"some of the postings on the web suggest:buying an external usb cd/dvd device. I might do this and try again getting an update for ite it8211 ata/atapi controller driver - whatever that means usb install option involving ripping the disk into a iso image and then making a bootable usb stick.

Why on earth do i need to do this? Surely using a usb external dvd/cd device and putting into that the windows 7 upgrade disk will do the same job?More important what is an iso image? How do i create it? Why should i have to do this?This software has cost me gbp180. 00 when i bought it from currys retail store sheffield uk w/c jun 21st 2010, and i cannot get it to work. It is not at all satisfactory! I deliberately waited till now before buying to make sure a all the bugs were ironed out!

Obviously they are not!My pc was bought new from mesh in may 2009 and the build detail is:mesh desktop pc model xgs pii 955amd phenom ii x4 955 black quad core processor am3 3. 20ghz, 8mb cache ddr2/3asus m4a78-e mainboard amd 790gx hybrid crossfirex - am2+ phenom ii, ddr2- atx8192mb 800mhz dual channel ddr2 sdram2 x 750gb serial ata2 hard drive with 3mb buffer (1. 5tb) raid 0 configuration (stripe)samsung 22x dual layer dvd writer super format +r/-r/rw/ram this shows in device hardware as tsstcorp cddvdw sh-s223b scsi cdrom device.

The driver is located in c:windowssystem32driverscdrom.sys1gb ati hd4890 graphics accelerator hd 3300 gpu - hybrid crossfire xpcie gigabit lan controller featuring ai net 2 - asus m4a78 proi will also try to call microsoft support on 0844 800 2400 using access code 1233 when prompted. However, i wonder if anyone else who has had the same problem with a similar machine can advise how they sorted out the issue.


Posted On: 2010-06-25 . View Related Posts . . View 5 Replies .

Upgrade - Uninstall / Remove Dvd-ram Driver Software

After the upgrade from vista to 7 began i received the following message: uninstall these programs. Open control panel and search for "uninstall a program". Dvd-ram driver software/bd driver software. Trouble is i can not find this software anywhere. Any ideas on how to remove dvd-ram driver software/bd driver software.

Posted On: 2009-10-31 . View Related Posts . . View 5 Replies .

Hp Dvd Rw Ad-7561s Ata Device Driver Corrupted Or Missing

Using compaq presario cq40-627tu notebook pc. Notebook cannot detect my optical device. Can be ejected without problem but cannot be detected by computer. Only hard disk partition and usb storage, if connected, are shown in computer. Device manager and bios detected it as "hp dvd rw ad-7561s ata device". This problem exist from the first time i use this notebook.
 
Effort made:
Update windows 7 ultimate 32-bit from basic update to any critical update available (all windows update had been applied). Last updated was on 22/03/2010 11:41pm +8. 00gmt kuala lumpur. Download all compact software and driver from compaq presario cq40-627tu notebook pc page on www.compaq.com but still cannot be solved after running health analysis from hp support assistant.

Had use any applicable driver scanner software but still cannot be solved. Had been cleaned up by tuneup utilities from http://www.Tune-up.com/ and hp tuneup from hp support assistant but still no changes. Had update the driver manually and automatically from the system and the internet but still no use.

Description:
This unit or notebook has not functioned properly since the first use (optical drive only). Had been send to the nearest computer services for re-cabling and services but still no changes. Here are the information from the devices manager after all effort had been made.

Hp dvd rw ad-7561s ata device property
Device type : dvd/cd rom drives
Manufacturer : (standard cd-rom drives)
Location : location 0 (channel 4, target 0, lun 0)
Device status : windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39)


Posted On: 2010-03-22 . View Related Posts . . View 3 Replies .

Cd/dvd Driver Issues - Win7 64-bit Pro Install

Cd/dvd driver issues in the beginning of windows 7 64-bit pro install. Installer will not let me move on until i find a driver for my dvd drive. The only drivers i can get to show up on the list are 64-bit drivers.

I'm upgrading from 32-bit so it won't let me use my vista cdrom drivers.
I have a sony optiarc rw ad-7170s firmware 1. 03 dvd drive
I created the bootable iso myself because of the issue with the digitalriver install
I burned the iso on 2 discs at 2 differnt speeds, didn't fix it.
Dvd is plugged into a sataraid pci card.

I'm almost sure it'll let me through if i can get my hands on the basic 64-bit cdrom drivers. I can't even find them online though.


Posted On: 2009-10-22 . View Related Posts . . View 3 Replies .