Advertisements:




Power Failure During Boot Time


I have a hp system that was upgraded to windows 7 home premium x64 from vista using the hp upgrade dvd. Everything worked fine until yesterday. The system restarted after a needed system update and by mistake i hit the power button during boot time. I press the button again to start and the system just does not want to boot. I have tried changing to onboard video on bios setup, system repair, system restore and safe mode but nothing seems to work. I also entered commands bootrec /fixmbr and bootrec /fixboot

During safe mode it just hangs at ahcxi64s.sys and then it restarts again. The system repair log shows below:

Root cause found:

Unspecified changes to system configuration might have caused the problem

Repair action: system files integrity check and repair
Result: failed. Error code = 0x490
Time taken = 849535 ms


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Every Time I Boot Up I Get Disk Boot Failure Message

I have just installed win7 and every time i boot up i get "disk boot failure" message so i have to put win7 dvd in and go into bois and change boot priority to dvd drive.

Pc spec is quad processor 8 gig of ram three hard drives two dvd drives


Posted On: 2009-10-31 . View Related Posts . . View 3 Replies .

Bsod - Driver Power State Failure

I get these failures every few days. Please tell me what is needed to stop these from happening. I'd be glad to send one or more of the 'mini dump' files. I have quite a few of them.
 
Pc: hp pavilion p6210y
6gb ram
Win 7 home premium 64 bit
Hp lj 1020 printer (usb)
Canon i850 color printer (usb)
Seagate free agent pro external drive (1394 connection)
Canon 4400f canoscan scanner (rarely connected) (usb))


Posted On: 2010-03-30 . View Related Posts . . View 8 Replies .

Stop 9f Driver Power State Failure

I frequently get stop 9f bug-checks after my system has been running for awhile and i attempt to put it to sleep or hibernate.

Below is the bug-check analysis:

Can anyone help with this?

Driver_power_state_failure (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, a device object has been blocking an irp for too long a time
Arg2: fffffa80048ec060, physical device object of the stack
Arg3: fffff800045fd518, functional device object of the stack
Arg4: fffffa80043815f0, the blocked irp


Posted On: 2010-03-03 . View Related Posts . . View 38 Replies .

Usb Devices Not Working After Power Failure

I recently suffered a power failure while i was using the computer. After powering on again certain usb devices that used to work well before returned errors. All attempts to get these devices installed fail. For example, when i plug in my sennheiser usb headset, the item is correctly identified by name but  i get the error "the drivers for this device are not installed (code 28). This device did not come with drivers and before would plug and unplug it without problems.

When i plug in my microsoft transiever v3 for bluetooth, i end up with "the drivers for this device are not installed" (code 28). This item come with my microsoft wireless mouse. When i try to reinstall the latest software, it is unable to detect this item. Before it used to work without problems. My logitech usb keyboard returns an error as well, yet a ps/2 keyboard works. Usb pen drives are working well. I am under the impression that the device database got corrupted. Is there a way i can reinitialize it? 


Posted On: 2010-06-12 . View Related Posts . . View 7 Replies .

Multiple 9f Driver Power State Failure

I've recently had some issues with bsod's every couple days or so. I have added a ssd a few weeks ago and did a fresh install of windows 7 pro 64 bit. Shortly after that i started having this issue. I've read that it could be an issue with sleep/hibernate as i do use both of these features often. I have attached the zip file containing the dump files, driver info, etc from the sevenforums tool.

Posted On: 2012-10-15 . View Related Posts . . View 4 Replies .

Intermittent Bsod Driver Power State Failure

Used free win7 trial on my computer when it came out. Rock stable. Purchased win7 home premium and did clean install. Now plagued by intermittent (every few hours) bsod and reboots. Needless to say i am more than annoyed that the free trial version worked perfectly whereas the paid version does not work so well.

I get driver_power_state_failure bug check code 0x0000009f caused by driver ntkrnlpa.exe
Or alternatively caused by driver ataport.sys 


Posted On: 2010-02-28 . View Related Posts . . View 9 Replies .

Blue Screen - Bsod - Driver Power State Failure

Every so often my laptop (hp tx2525nr) will have a blue screen of death with the error message: driver power state failure. It also will also occasionally freeze up and the screen will become all jumbled with lines and stuff and i will have to do a forced shut down. Either one of these will happen about twice a week, sometimes even more than that.

I have tried updating my drivers multiple times but no luck. I used to have vista (x64) but did a clean install of windows 7 professional (x64) hoping that would fix my problem, but still no luck.


Posted On: 2010-03-28 . View Related Posts . . View 29 Replies .

Blue Screen Of Death - Driver Power State Failure

Blue screen of death "driver power state failure" with a memory dump. This is on my new toshiba qosmio x505-q830. I have searched on this issue and can not find an answer, my computer has been displaying a bsod that says "driver power status failure" doing a memory dump and then rebooting for over a week now. They happen every couple of hours or so.

Posted On: 2010-01-08 . View Related Posts . . View 2 Replies .

I Get Blue Screen Every Time After Power Save Mode Or Hibernation

Have tried to look for driver updates from hp and microsoft, none work. Have done a clean load, not an upgrade after purchasing. Have tried 64 bit and 32 bit loadings.

Posted On: 2010-04-10 . View Related Posts . . View 23 Replies .

Crashes And Debugging - Bsod Ntoskrnl.exe And Driver Power State Failure

I have recently installed a ssd into my laptop and re-installed everything. I also switch the sata mode to ahci to improve the performance. But there is one problem that did not occur before is that after a long period of using the laptop, i cannot plugin any devices to the usb ports. Then i scan for hardware changes, and the finding window keep doing forever. So i try to shutdown and it fails to do so, after about 30 min it says bsod with driver_power_state_failure. This does not occur instantly when starting windows, only after a period of using. I have attached the sf diagnostic data.

Posted On: 2012-09-27 . View Related Posts . . View 12 Replies .

Cpu Will Not Boot Up After Power Outage

I had a power outage last night, cpu is on a surge protector. When i tried to boot up this morning the screen has lines all over it and nothing will run. I can see the screen that show to hit tab for bios and all that but it will not go any further. I tried to install the restore cd to no avail. It happened one other time in the past but after awhile i was able to start up and everything was fine. Now i can not get the computer to boot up. There are no error messages, no blue screens, just will not start. Os is win 7

Posted On: 2010-06-24 . View Related Posts . . View 2 Replies .

Cannot Boot With Usb Keyboard Failure

I'm running windows 7 ultimate on a dell dimension e520, this has run without trouble since install. The machine is fully patched and with upto avira and immunet and a full scan with malwarebytes last sunday came back totally clean. However yesterday a blue error screen came up and before the machine powered down i saw a message about usb.sys but did not have enough time to read it !

When i power up the machine the keyboard lights initially work but as soon as i try to use it to boot the machine or boot from the install dvd the keyboard fails. I have a midi music keyboard pluged in, the lights on this do not indicate failure, but moving my qwerty keyboard to use a usb socket that works with that also fails.


Posted On: 2010-07-28 . View Related Posts . . View 10 Replies .

Os Boot Menu Time Setting

I don't know what this black screen is called , but its the one, where  u can choose which operating system u want to use. For example if u installed windows 7 and windows vista and u open ur computer  it gives u a choice  to choose which windows u wanna use. Basically i installed windows 7 twice and  now i have to choose between windows 7 and windows 7 the first one is the working one, the second one not. But it takes 28 seconds to be chosen automatically. I was wondering if i can either decrease these 28 seconds to 1 second for example or just remove the second windows 7 to make it run with the first one automatically.

Posted On: 2010-08-04 . View Related Posts . . View 6 Replies .

Slow Boot Time When Nas Is Not On

I just recently built a new computer and installed win 7 professional 32 bit. I have a nas that is turned off because i think it is about to fail. Making all sorts of loud noises and so forth. When windows loads it stalls with a black screen for a good thirty seconds before taking me to the desktop. It also warns me that it cannot connect to that nas. Before i told windows that it was there it would immediately boot up. Is there any way to tell it to not try to connect to it? I know i can just disconnect it within the my computer screen but i didnt want to lose my drive mappings.

Posted On: 2010-01-22 . View Related Posts . . View 4 Replies .

Boot Failure On Moving From Native Ide To Raid

Moving from native ide to raid onchip sata type causes windows boot failure.

I installed windows 7 a few months ago and the install went rather well. I installed windows 7 on a dedicated sata hdd (c drive) and i have another sata drive that i keep my audio and video files on (d drive). Well. . . Today i decided to make a change.

I bought two new hdd's that i'd like to run in raid-1 that will replace my current d: drive. So, i crack open the manual for my motherboard (gigabyte ga-ma78gm-s2h) and it says i need to change the following in the bios:

Under the "integrated peripherals" menu set "onchip sata controller" to "enabled" (it was already enabled), secondly set "onchip sata type" to "raid" (it was "native ide"), lastly set "onchip sata port4/5 type" to "as sata type" (it was unset).

So, i've noticed that after i change "onchip sata type" to from "native ide" to "raid" and reboot my pc that windows doesn't load :-/  instead, it loads the "windows startup recovery manger" which runs for a while and then indicates that it cannot repair the problem. Going back into the bios and changing the  "onchip sata type" back to "native ide" allows me to successfully boot windows 7 again.

So, what gives?  I really don't understand what "native ide" means, or for that matter what "onchip sata port4/5 type" means in the bios, but i need to change these settings so that i can build my new raid-1. Can you tell me what's going on and how i might progress. . .

I think that maybe i need to install the sata controller driver from the motherboard manufacturer so that windows 7 can recognize the hard drive. . . But that's just a guess. If that's the case i guess the question becomes, how do i install the sata controller drivers after windows 7 has already been installed.


Posted On: 2010-01-23 . View Related Posts . . View 2 Replies .

Disk Boot Failure Insert System Disc

I have recently built a new i7 920 computer with new components such as motherboard (ga ex58 ud3r) and new sata ii hdd. The sata is connected to one of the many sata ports with a sata cable. There are also two gsata ports but not sure whether the hdd is supposed to be connected to it. A dvd drive is connected with a 'ribbon' connector to the motherboard but not sure whether it should be connected with the end connector or the middle connector (the ribbon wire has 3 connectors, one connected to the motherboard and one to the dvd with one spare connector).

I have windows 7 home premium upgrade as i have a key for vista. The bios detects that a hdd and dvd drive are present (hdd as ide master 1 and dvd as ide slave 4). I set the bios to boot from cd-rom, however there is no option for dvd-rom. I insert the windows 7 home premium upgrade dvd and reboot the computer. However, i still get the "disk boot failure, insert system disc" message. Is this because i cant boot from an upgrade dvd or that it is still not booting from the dvd? 


Posted On: 2010-05-18 . View Related Posts . . View 8 Replies .

Power Saver Issue With Printer Reduced Power

After a recent update on windows 7 in which there is a power saver, i can no longer get my laser printers to work because of the reduced power. How can i fix this ?

Posted On: 2010-03-18 . View Related Posts . . View 4 Replies .

Dual Boot Boot Problem After Resizing Win 7

Boot problem on dual boot after resizing windows 7 (32bit) switched from drive w: to drive g: i have a dual boot system that boots into win 7 (64) (c:drive) or win 7 (32) (w:drive). I needed to increase the size of win7 (64) drive and in order to do so i needed to move the win 7 (32) partition. Now i can still boot into win 7 (64) with no problem but when i boot into win 7 (32) it windows states that it is not a genuine copy and it is actually on drive "g:"! Anyway to change it back to "w:" because i believe this is the problem.

Posted On: 2010-05-24 . View Related Posts . . View 10 Replies .

Dual Boot - Move Boot Image To Second Drive

I have a problem with two different drives both running win7, one 32 the other drive64, on a dual boot system. I want to pull the win32 drive, but it also has my boot information for the win64 drive. When removed it will not boot. I have been working on this for 5-6 weeks. I want to remove the win7/32 and put the boot image of win7/64 on the second drive.

I booted from the win764 install dvd, and went to there pair your computer. The placethat displays the operating systems installed, none will show. I have tried bootsect from the command prompt. It seems to work, but tells me no partition on the second drive. Or on another attribute used, it can not find the path to the drive. I have tried rebuild bcd, fixmbr, etc.


Posted On: 2010-01-16 . View Related Posts . . View 5 Replies .

Boot Takes Minutes, Will Boot In Safe Mode

When i booted up this arvo, the computer took 15 minutes to get to the log in screen. Upon clicking the profile image, i had to wait another 5 minutes of unresponsiveness for even the desktop background to display. Rebooted 3-4 times, still happened, booted in safe mode, (which is how i'm writing this) and initially thought it was msmpeng.exe that was causing me issues, so i removed mse once i finally managed to get it going in normal mode. I thought the problem was fixed when i rebooted, and i had about 4-5 minutes of normal speeds before it slowed right down and became unresponsive.

When the computer is running, the actual computer itself sounds fine (hard disk is chattering away) but when going slow and unresponsive it only makes noises every 1-2 seconds, if that makes any sense, as if it's under a really heavy load. Hard to tell because i cant open anything. Ran a system restore, didn't do anything. I need help soon! I suspect a driver issue, but i'm just speculating. Specs: windows 7 home premium 64 bit 6gig ddr3 ram i7-860 cpu ati 5770 gpu


Posted On: 2010-08-12 . View Related Posts . . View 11 Replies .

Dual Boot - 1 Xp And 3 Win 7 Boot Choices

I've installed win 7 on my d drive, with win xp still on c, with the idea of having a dual boot system. Due to installation problems, i now show the xp boot choice, and 3 win 7 boot choices, with only the most recent valid. How do i purge the b. Boot.ini doesn't appear to be relevant. Win 7 utility boot rewriter program to re-point boot to ntldr will wipe out all pointers to win 7 for booting, but comes back with an extra win 7 pointer, the next time i load win 7.

Posted On: 2009-11-10 . View Related Posts . . View 3 Replies .

New Sata Boot Drive Wont Boot

I have a new 2t sata drive (seagate). It took about 5 days of research to finally get my computer to see it. I used seagate's disk wizard to clone my older drive (ide). The sata drive was supposed to become the c: drive. Disk management does label it as the c drive but in "computer" it sees it as f:i disconnected my older drive and when i booted up the bios kept looking for the ide drive. Although the motherboard has sata built in, there seems to be no way to tell the bios that i want the sata drive to be the primary boot drive.

Also with the original drive disconnected i get a "ntldr not found. Press control-alt-delete to restart. "I believe mybios is the problem. I have flashed it with the newest bios i could find, (dates from 2005) but no sata adjustments in the bios. How can i make the bios know that i want the sata drive to be the primary boot drive?

Or is there a way to trick the bios into thinking that it is an ide drive? As it is, the computer is recognizing the sata drive as a scsi drive. I read somewhere that this is not a problem. In summary, i want my system to boot from the sata drive. I would like to reformat the original drive.


Posted On: 2010-08-17 . View Related Posts . . View 6 Replies .

Boot Problem - No Boot Device Found

Each time i start up the system the boot file cannot be found. I select the "repair start up" option and it completes it successfully with following detail: root cause found: the partition table does not have a valid system partition. Repair action: partition table repair.completion successfully. After this the system will start up. As mentioned, i have to do this at every start up, so i'm wondering why this partition table disappears when i shut down the desktop. I should mention that this problem started at the time i downloaded and installed the true image backup software.

The installation could not complete and one possible solution to the problem was to stop the antivirus program. At that moment i noticed that the avast antivirus was hanging and i was not able to kill the process. So i restarted the system, using f8 to get the safe start option so that i was able to uninstall the antivirus program. I then tried to install another antivirus application and when installation was almost finished got the message that it was unable to complete installation. I tried to install another backup solution (paragon), but also this one failed. On the other hand, i was able to install the firefox browser.


Posted On: 2010-07-31 . View Related Posts . . View 2 Replies .

Dual Boot - Can't See Win 7 Drive After Removing Other Boot Drive

My mobo (msi p7n diamond 780i sli / 570i sli) has a sata raid controller providing 6 sata interfaces
These are organized thus.

Sata 1 - [partition 1 - windows xp] [partition 2 - windows 7 beta (64bit)]
Sata 2 - ocz vertex - windows 7 home (64bit) retail version
Sata 3 - mirror a
Sata 4 - mirror b
Sata 5 - mirror a
Sata 6 - mirror b

The system was originally running xp on sata 1. I added a partition to sata 1 and installed windows 7 beta some weeks ago. The system dual booted to xp or win 7 beta fine. I then added the ocz vertex drive and installed the win 7 retail version, and i am able to dual boot to all three systems just fine.

However - i really want to do away with the xp and win 7 beta partitions and just run with the ocz drive. However if i disconnect the drive from sata 1 the system will not boot up. Can't find ntldr or bootmgr or something similar. I have changed the boot sequence in the bios to point at just the ocz drive - but it just won't boot from it.


Posted On: 2009-11-12 . View Related Posts . . View 5 Replies .

Power On Password

I pushed the power on, just as i normally do. But found out displaying this: "power-on password". The last time i use it was like the usual thing i do. I do now know the password and how i ended up with this. I tried some of these: i tried to remove the battery for a meantime and hoping it will turn on normally but still shows the same result. Everytime i click enter, it shows the same until 3rd time. Everytime i click f11 or any function keys, it still shows the same. I just purchased windows 7 9 months ago but haven't experienced any negative things until now.

Posted On: 2010-05-07 . View Related Posts . . View 2 Replies .

Laptop Will Not Power Up

Have been given a toshiba protege r400 mod no:ppr40a-01000l to look at for a friend who is very ill and the machine just will not switch on. Have tested the adaptor and battery voltage and there is plenty. Now i don't have much experience with laptops as such and so cannot rule the psu as the culprit. When plugged in the blue power light is on and the small yellow battery indicator flickers at random speeds - but quite fast. Now i have the maintenance manual for it and i can probably get the lcd mask off to look at the power witch itself. But before i do i would like some opinions on the most likely cause and would prefer to avoid this if at all possible.

Posted On: 2012-01-16 . View Related Posts . . View 12 Replies .

Error - Driver Power

I have received a blue background message that there is a "driver power" error. After this message there is a dump and a close and restart of my computer. I do not have problems with my applications-they all run under windows 7.

Posted On: 2010-01-29 . View Related Posts . . View 2 Replies .

Can't Find Os When I Power On

My pc can't find my os when i power on. My bios lets me enter f9 to pick which drive my os is on allowing me to power on. What can i do to fix this windows 7 system. I have loaded windows 7. My system can't find the os when powering on. My mb seams to have a feature that lets me pick the drive the os is located on and allows me to bring up my system. I have to hit f9 to during power on to engage that feature. What can i do to fix this issue?

Posted On: 2009-11-08 . View Related Posts . . View 2 Replies .

Why Doesnt The Usb Power Off ?

Why doesn't the usb power off in windows 7 & vista. My led is still on after i click on the remove usb icon. Vista and win 7 rc1 still say i can remove the usb but the usb is still powered. This, in my opinion, can still affect the usb. Is it possible to have the usb power down like in xp. It is not a big issue but important from the stand point of possibly losing data on the usb or other device.

Posted On: 2009-05-31 . View Related Posts . . View 2 Replies .