Advertisements:




Wireless Problem Ip Conflict


I have a lap top ( gateway - windows7 ) and i connect to the internet via wireless. The problem is that the connection is really unstable, it drops like every single minute!

A message popped up saying that this computer has an ip conflict, that it has the same ip as another computer. Maybe that's the problem?

This connection is really driving me crazy, can someone help me out? The funny thing is that if i connect to others wireless connections, like in school for example, it works without any problem, without a single drop!


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Sound Card And Wireless Network Card Conflict

I installed windows 7 custom (from xp) and my dlink dwa552 card connected immediately. The next day, i downloaded the drivers for my creative sound card, sb - xfi and after re-booting, the wireless would not connect. I disabled the sound card and still could not connect. Disabled the wireless and enabled, it connected correctly. Then i can enable the sound card without losing the connection, however, if i lost the connection, it would not re-connect. Any ideas how to trouble shoot this? 

Posted On: 2009-10-27 . View Related Posts . . View 5 Replies .

Ati Drivers Conflict

I upgraded from xp x32 to windows 7 x64. I performed a clean install of xp and immediately installed win7. After the first reboot in the setup the image on my monitor became garbled just after windows loaded. First, i restarted into safe mode but got a message that the installation was not complete and could only be completed in normal mode. I found that after windows loaded i could type my user name and press enter repeatedly to complete the installation although i still couldn't see what was happening.

After the installation completed i went into safe mode which gave me a clear picture. If i disabled the display adapter in safe mode i could boot into normal mode with a clear picture, but windows 7 would then install drivers which caused the image to become corrupted upon reboot. During one boot into normal mode the device manager gave me a code 19 for my video card:"windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.

I've tried 2 clean installs, 3 driver versions, and a different monitor. The other monitor just gives a black screen where my main monitor gives a garbled image. I've used driver sweeper and the control panel to uninstall the video drivers, and i've installed new drivers from downloaded .exe's and by letting windows find them. This computer was working perfectly fine one day ago with windows 7 rc x64.

Video:   gigabyte 4870 1gb
Mobo:   asus rampage ii gene
Cpu:     i7 920
Ram:    6gb patriot ddr3
Sound:  creative x-fi xtremegamer pro
Hdd:     western digital caviar blue 320gb 


Posted On: 2010-02-18 . View Related Posts . . View 4 Replies .

Keyboard & Mousepad Conflict

I have recently installed windows 7 pro (64-bit) over my last os - windows 7 ultimate candidate (32-bit). Before hand, i had no problems with my keyboard and mouse-pad. Now, i can't move my mouse while i press a key on the keyboard (letters, space bar, numbers, etc). The mouse pointer just stays in place while a key is pressed, and even after i let go it takes a second for the mouse to move again. This is especially annoying when i'm trying to use keyboard shortcuts on photoshop.
I am not using any new programs.
 
My computer specs:
Acer extensa 4420
Amd turion64 x2
Ati radeon x1250


Posted On: 2009-12-31 . View Related Posts . . View 4 Replies .

Conflict Between Usb Devices

I have windows 7 ultimate x64.couple days ago i bought apc smart ups 500va that has a usb connection to the pc to enable a soft shut down. I have installed the latest win 7 drivers from apc. I also have microsoft wireless multimedia keyboard 1. 1 and microsoft wireless optical mouse 2000. Once i installed the ups (it's using one of the usb ports), every time i reboot, the keyboard and mouse freeze and i can't fix that until i plug the ups out of the usb and reboot. Once i am in windows, i can plug the ups back in and it works perfectly. Re-installing drivers, removing devices and other usual tricks have not hepled. How can i get around this problem without replacing the hardware? 

Posted On: 2009-12-09 . View Related Posts . . View 4 Replies .

Installer Language Conflict

Just moved up to 64 bits windows 7. I have the dutch language version. I am trying to install msxml2 sp2 (msxml. Msi). One can choose from a number of languages, but not dutch, so i choose english (which is what i always did previously, and without problems). As soon as i click on install, my computer freezes up, and the only option is to turn off the power switch.

I have noticed that with other programmes (for example abbyy fine reader 9. 0) where one can choose the language (including dutch), the same thing happens if i choose a language other that dutch (fair enough), but surely we are allowed to use the msxml package? Any suggestions?Ideas:programs you are having problems with error messages recent changes you made to your computer what you have already tried to fix the problem.


Posted On: 2010-07-15 . View Related Posts . . View 3 Replies .

Conflict Using Hauppauge And Nvidia

I recently installed hauppauge hvr in my new computer which uses a nvidia graphics card. Everything seems to work except the video input (using s-video) from a digital video camera (mounted on a microscope). The picture trough my win tv 7 is split, with the bottom half at the top of the screen and the top half at the bottom, separated by 3 colour bars across the screen. The picture is otherwise in black and white but should be in coulour. A second feed going directly to a tv is fine. Everything works as it should using usb live and windows xp. I am using windows 7 ultimate. We really need this to work as our business depends on it.

Posted On: 2010-02-15 . View Related Posts . . View 2 Replies .

Emulation Software Conflict

After downloading the latest patch for battlefield 2142 deluxe i received a message that stated "conflict with emulation software detected", ea support states this is because the game is being ran on a virtual drive and suggested i deactivate the emulation software. I am unable to locate any procedure for doing so. Will doing so affect any other operation ? I have a hp pavillion d4790y , vista home premium 32 bit, intel core 2 cpu (email removed for privacy) , geforce 7500 gpu, 2. 00 gb ram, service pack 2

Posted On: 2010-02-28 . View Related Posts . . View 2 Replies .

Ip Address Conflict On Home Network

I am a new at this and have never asked a question before but i am utterly lost. I am having a problem getting my 3 computers to connect to my wireless network. I am running windows 7. I can connect the laptop but when i try to connect the netbook or the desktop. I get an error of "ip address conflict". Below is a list of what i have tired.

Disconnected the wireless router and the modem.
Reset the wireless router to try to force a new ip address.
I have read and read.

I just read about the dhcp client and that is enabled but if i do a cmd ipconfig /all it says that dhcp client is not enabled but the auto configuration is enabled. The physical address is showing a string of zeros. Done an ipconfig to release and renew on both the laptop and the netbook.

When i do just an ipconfig:

Connection-specific dns suffix domain_not_set. Invalid
Ipv6 address: 2002:45b6:6a50:45b6:6a50
Default gateway: 2002:c058:6301:c058:6301

I have read all over this forum and i keep trying everything and nothing is working. I am not sure if i gave enough information. Any advice?


Posted On: 2010-04-04 . View Related Posts . . View 2 Replies .

Power Service Conflict With Screensaver

My screensaver and other standby mode options have had problems starting. (For example, if i set my computer to a screensaver after 1 min, a closed screen after 3 min, and sleep after 5 min, none of them work)i went through and did a clean boot, to find that the screensaver and other options still did not start. It was only after i selected "diagnostic startup, " did the screensaver finally appear. After enabling services one by one, i discovered that it was the "power" microsoft service interfering with the screensaver starting up. Is there a way to fix the power service so that i may enable it without having it interfere with my screensaver?

Posted On: 2010-08-02 . View Related Posts . . View 2 Replies .

Ati Driver Conflict - Display Crashes

I have an on going issue with my new system. At first i thought it was video/hardware related, but now i am leaning towards it being a conflict with windows. However, i have no way of tracking it down.

The issue: my screen will randomly die when running aero intensive applications, games, etc. Everything will run fine for a given amount of time (any where from seconds to an hour), but then the screen will clicker and the display will go out. On the screen i see a series of vertical white bars with a colors background. It does not appear to lock the computer up, as i still hear sound going in the background for a time; the computer will eventually reboot if i leave it alone long enough.

This is all running on a fresh install of windows 7 64x, upgraded from vista business 64. The temperatures on the card all read as normal, and there are no errors showing up in the event viewer after i reboot; outside of the 'unexpected shutdown' critical error.

When this first started happening i contacted xfx support for the video card. They had me uninstall the ati drivers, run driver sweeper, and reinstall the drivers. This seemed to fix the issue until tuesday, when windows update installed kb977074 - an update totally unrelated to video - and then the errors started happening again.

After a fit with system restore, i decided to format the drive and start over. Upon getting back in to windows 7 64x, i started installing programs one by one, checking after each install to see if i could create the error again. Everything was fine until i reached a program that installed the visual basic c+ 2005 redistributable package (x86). Once the error started to occur after this, i uninstalled the programs and did a system restore prior to the package installing.

The computer already had the c+ 2008 (x64) package installed, and worked fine once the 32-bit 2005 package was removed. However, most programs i want to use, and most games for that matter, require the 2005 package to be installed. So i re-installed it, and removed the 2008 package; thinking it was a conflict between the two (/straws), but that did nothing. The errors returned, and i an now back at square one, hiding on the last stable restore point of the system.

I am not sure if i am still dealing with a driver conflict, hardware issues or if the c+ packages are some how messing up my system. I am not putting much faith in the latter, because i do not believe the first scan with driver sweeper would of been so successful, only to be taken down later by a totally unrelated windows update file.


Posted On: 2010-01-29 . View Related Posts . . View 2 Replies .

Synaptics Touchpad Conflict With Microsoft Mouse

I am having a problem with win 7 and an apparent conflict with the synaptics touchpad. I have a microsoft mouse working so i can use the laptop, but the touchpad won't work. I have tried just about everything from uninstalling both the touchpad and the mouse to a clean install of windows. I have narrowed it down (after several clean installs) to what seems to be a conflict with outlook connector. After the clean install the touchpad has resumed working and then i had to reload all of my programming which is a real pain.

The touch pad seemed to stop working after i downloaded and installed the outlook connector to allow mapi connection to my msn.com emails. I can not keep up the clean install process (done at least 3 times). I have downloaded the synaptics driver direct from the company without a fix. Gateway says keep doing a clean install which is ludicrous. The touchpad driver says it is working properly with no conflicts even though it does not work. I believe that this is a windows 7 problem. Any further ideas would be appreciated. By the way once the synaptics touchpad stops working nothing short of a clean install will fix the problem, so i have a choice no outlook or no touchpad.


Posted On: 2010-01-22 . View Related Posts . . View 4 Replies .

Conflict Between Broadband And Dial Up Connection In Win 7

I have recently added broadband service and kept dialup because of bb unreliability. But in my previous windows which was vista, eventually the system wouldn't recognize my dial up modem. Now, in my new windows 7, when i'm accessing email (through thunderbird) i a get a message that i'm offline, when the broadband is totally working. How can i keep both working when i need them?

Posted On: 2010-06-10 . View Related Posts . . View 2 Replies .

Conflict Settings In Mobile Device Center

New mobile device center in windows 7 conflict resolution settings are too simplified and hence confusing. You can choose one of two settings:

Replace items on desktop; or
Replace items on device.

Any idea which is which? My primary synching is with exchange server at work. Periodically, i want to synchronize with my pc at home (which has windows 7). My worry is that i'll choose the wrong setting and lose the contacts on my device, which is constantly synchronizing with exchange server. I don't want my home pc to change anything on my device (i.e. , I only want to synch in one direction).


Posted On: 2010-01-20 . View Related Posts . . View 2 Replies .

Xp Programs Conflict With Vista - Will Win 7 Fix Those Issues ?

I work with large property management companies and banks that require me to run windows xp to work with there programs, some sort of conflict between there program and vista. Will windows 7 fix those issues so that i can run windows 7? 

Posted On: 2009-10-15 . View Related Posts . . View 2 Replies .

Wireless Mouse 5000 & Wireless Keyboard 3000 V2.0 Not Working

Bought the above package items and using it fine for a few months(2-3 months). Wireless mouse just don't work suddenly. Tried removing battery and then putting it back, it works. A few minutes later, mouse not working again (i notice no blue light at the bottom of mouse). Try again removing and putting back battery, it works again. But it lasted again for a few minutes.

That was the solution till one day(2 weeks ago), no matter new battery or removal and putting in batteries, the mouse did not work. I had to revert back to wired mouse and keyboard. But today, trying my luck, i connect up the above wireless keyboard/mouse, it just works again. Please advise these peculiarity hardware issue on this ms wireless mouse 5000. Should i sent for replacement. If yes, where should i go to in singapore.


Posted On: 2010-07-29 . View Related Posts . . View 2 Replies .

Adding Wireless Win 7 Pc To Existing Xp Pro Wireless Network

Have an existing wireless network of windows xp pro (3), want to add a windows 7 machine. Existing network is still up and running, all machines on. I can ping all machines from any other, all workgroups names are the same, file sharing is on and ip are in safe or allowed by firewalls. Windows 7 machine shows none of the network except the router. Any suggestions?

Posted On: 2010-02-04 . View Related Posts . . View 2 Replies .

Cannot Connect To Wireless Network Using Usb Wireless G Adapter

Using linksys wusb54g wireless adapter.connected fine when win7 first installed. Now i cannot connect via wireless, using ethernet cable. Win7 diagnostics thinks everything is fine, but can't connect. How do i get in & reset my wep password? Drivers all up to date, i believe.

Posted On: 2009-11-05 . View Related Posts . . View 2 Replies .

Sharing Wireless Network Between Win 7, Xp, Wireless Printer

I had no trouble sharing my wireless network when the desktop was xp and the laptop was xp. Since replacing the desktop with a new windows 7 unit, i cannot manage to set up a network. I just purchased a new wireless printer, and i cannot set it up wirelessly either. I can network the printer to work with the win7 desktop if i connect the printer to my router with a ethernet cable. My router sees all 3 devices and i can ping the printer and the laptop from the desktop. The desktop is connected to the router via ethernet cable.

Posted On: 2010-07-10 . View Related Posts . . View 6 Replies .

Wireless Mouse

I am having trouble with my recently purchased 'targus' wireless mouse. It was fine till now, but all of a sudden i heard a beep from my laptop (similar one which comes when you plug/unplug something to a usb drive) and it just doesn't work anymore! No lights on the usb receiver which comes along with the mouse anymore!I remember the following things:1. I had installed updates from windows yesterday (but after that as well for couple of hours today it was fine)2. I got an alert for battery level and soon after i plugged in the power source i got the beep and mouse went dead in some moments. These may be irrelevant, but could anyone please help?

Posted On: 2010-08-10 . View Related Posts . . View 2 Replies .

Wireless Printing

I have a new hp laptop connected to an hp ps1315 printer and another new hp laptop (both with windows 7) connected through a wireless network. I have been able to print wirelessly for a couple of months, but all of a sudden, the printer shows "offline" on the wireless laptop, but "online" on the connected laptop. Restarting everything seemed to work the first time this occurred, but will not work now. Is there a way to set the wireless laptop to "printer online"?

Posted On: 2010-02-12 . View Related Posts . . View 2 Replies .

Move Wireless To A New Pc

I have a wireless router with a wired  xp wired  that is the host of the network. A wireless laptop and printer are attached. I just bought a new win7 pc and want to move the network hosting to it, because i want to reinstall the os on the xp, after transferring my files. How do i accomplish this? What effect will this have on my laptop and printer?Do i start afresh with a new network on the win7? And if so, how do i get the laptop and printer to recognize the new network?  

Posted On: 2010-06-09 . View Related Posts . . View 3 Replies .

Wireless Router, One Pc Will Not Network

I have new 4 hp desktops set up on a wireless network thru a westfall wireless router that have been in use for several months without using any of the windows 7 network - home/work group capabilities. I was asked to connect a hp wireless printer through the same router so all four pcs could print to the one printer. The printer set up was easy. However, all but one pc is able to network. I can map the other pcs and printer.

I can access the printer webpage and change printer preferences but i can not use the printer. When i am in the network settings, the full network map setting shows the other pcs and printer but when asked to show devices connected to the network it shows zero items. I have checked all firewall, internet and file sharing settings on all four pcs and they are the same. This is my first experience using windows 7. Is there another feature that would block sharing or networking access?


Posted On: 2010-04-18 . View Related Posts . . View 2 Replies .

Wireless Driver Not Working

I'm using toshiba x205-sli2 which has intel® wireless wifi link 4965 agn (802. 11a/g/n)
I made a clean install of windows 7 professional and i installed the driver of the hardware (wireless lan) manually but its not working in the device manager the driver is installed correctly but when i run the diagnostics of the wireless connection it says there's a problem in the driver, tried many drivers but none of them worked.


Posted On: 2010-04-20 . View Related Posts . . View 2 Replies .

Wireless Mouse 5000

I bought wireless desktop 3000 kit. Keyboard is really amazing and also mouse. Problem that i am facing is that, i have installed everything. Mouse software, drivers etc. In application mouse scroll works fine. But in games scroll sensitivity is very high. But basic optical mouse works perfect! Basic mouse worked perfect in all games. But this wireless mouse 5000 is not working properly (very very high sensitivity. ) I cant even swap the weapons. The problem is not with games as previous basic optical mouse worked really great.

Posted On: 2010-01-29 . View Related Posts . . View 7 Replies .

Linksys Wireless Wusb54g V.4

I have windows 7 x64 and according to the compatibility chart, this device is "compatible" logo and all. Unfortunately i live in the real world, and this device is not compatible. I have been using the rt2500usb. Inf/.sys files for my device but it is a downward spiral. The device will work for a while (day or so) in usb port a, then starts disconnecting/reconnecting randomly.

Later it will start dc/rc hourly, then about 10 mins, then it gets to the point where all i hear is the dc/rc dings as spam from my pc. This device also effects other devices that are on usb the same way. In other words port b will do the dc/rc which is my external hdd instead of my wireless card. I'm really not looking forward to buying yet another card for this pc, as this one is not returnable.

Where it does work: ubuntu 9. 10 runs this device as a rt2750 instead of the rt2500 i currently have drivers for. Windows 7 x86 runs this device without fail.


Posted On: 2010-03-18 . View Related Posts . . View 3 Replies .

Wireless Mouse Does Not Work

I have a microsoft wireless comfort keyboard 4000 and a microsoft wireless laser mouse 5000. All of a sudden the mouse stopped working. I can see the cursor arrow on the screen but my mouse wont move it. My operating system is vista 64-bit. I have gone through all the diagnostic steps to no avail: replaced the batteries, downloaded the latest software from microsoft, changed usb ports, tried another computer and checked my device manager. The device manager tells me the mouse is working properly. It may be that the mouse is dead but i though before the burial that i would take a chance to see if anyone out there had a similar problem but solved it.

Posted On: 2010-07-09 . View Related Posts . . View 2 Replies .

Wireless Printer Not Connecting

I have installed a wireless printer on my computer. I am able to connect the usb cord from my printer to my computer, and print just fine, but when i try to print wirelessly, my computer pops up a message saying that the communication could not be accessed. It gives suggestions on how to fix the problem, which i have done all of except for 1. It says to check the firewall to see if it allows the computer to read the printer. But i don't know how to find the printer option in my firewall section. How do i get my wireless to work on my computer?

Posted On: 2010-04-08 . View Related Posts . . View 2 Replies .

Wireless Transceiver V2.0 Driver

I run microsoft windows 7 64bit, i bought the microsoft wireless desktop 6000, the cd says that it will not install because it's not compatible to windows 7, microsoft.com/hardware provides intellitype and intellipoint for windows 7. I downloaded both and installed them. I inserted the transceiver to the usb port and i have automatic search for drivers turned on. Windows 7 cannot find a driver for the transceiver and neither can the automate online search.

Additional information. It's a v2 and windows 7 detects it as a v1. I tried to uninstall with driver and update again but it is still detected as a v1. If anyone could even tell me where to get the v2 driver i'd be happy because i could do the rest from there.

My question: where the bloody is microsoft hiding the driver for this thing?


Posted On: 2010-03-06 . View Related Posts . . View 2 Replies .

Hp Wireless Printer Will Not Install

I recently changed internet providers and removed a wireless router. The new modem is wireless. My wireless printer would not communicate with the wireless enabled computer without being hard wired. I uninstalled printers and attempted to reinstall. Printer software will not install. A message stating that my printer is not supported by my operating system and i need to update the operating system. I upgraded to windows 7 when it first came out. I successfully removed and reinstalled the printer on a wireless laptop running windows xp. Where do i go from here?

Posted On: 2010-01-08 . View Related Posts . . View 8 Replies .