Advertisements:




Cannot Connect To Ultravnc Server


I have problems using ultra vnc in windows 7 : my vnc viewer run in xp pro while my vnc server run in windows 7. I can connect to my vnc server after installing the necessary software and port forwarding in the server's router. Port open for vnc in firewall. It was tested well without problem. But the
Next day i failed to connect to the server. What other setting do i have to look out for in windows 7? I have no problems in xp pro at all. Thanks and hope anyone can help me to solve this problem.


View Full Post With 5 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Cannot Connect Ps3 Media Server

I am using windows 7 and i was pleased that when i turned on my ps3 one day i could see the movie files from my pc. Both are connected to the same secured network. For some reason i am now unable to locate my pc on the ps3 and i don't recall changing any settings. The only thing i can think of was the installation of avg security but i am not convinced that this is the issue as i have avg on my laptop and the ps3 can see that computer.

I have been through and checked all sharing settings that i can locate, however, this has not fixed the issue.


Posted On: 2010-05-09 . View Related Posts . . View 2 Replies .

Unable To Get Permission To Connect To Office Server

New windows 7 pc unable to get permission to connect to office server (win2003). I work in a small office, which up until recently was just 2 pc's running xp, connected to a server which housed accounts and shared files and backups. We purchased a new pc pre-installed with windows 7 (home). We can find (tho not always) the networked drives and view them, but not get permission.

My knowledge of networking is limited, but i'm assuming this is because the win7 pc is not logging onto the server on start up, i have an account for it to log onto, but unable to ascertain how/where exactly to go to enable it to log onto the server. Would upgrading to professional cure this issue? Is there another way around this? The server is running windows server 2003. Can't think of any other info off the top of my head which may help.


Posted On: 2010-06-02 . View Related Posts . . View 5 Replies .

Dns Server

I have a windows dell inspiron. I have a wired connection to the router and there is a problem with the dns. It says there is a problem with the dns server that it can't fix. My other computer is wireless and connects to the internet no problem. I can enter the ip address and get to the website but not the www.Msn.com type address. I spent hours with first my internet provider, then microsoft, then dell (who assures me there is no hardware problem). As best they can figure it is a third party software conflict causing the problem.

My latest attempt to solve the problem was to install windows 7 (before i had windows vista). After 3 hours of going online with no problem the same "dns configuration" problem cropped up. During all these problems i am able to download torrents using utorrent. Does anyone have any ideas? I am at a loss.


Posted On: 2010-04-21 . View Related Posts . . View 3 Replies .

Domain Server Not Reachable

I have a problem going to a certain website. Never had a problem before. It's www.Thegoodcook.com. It keeps saying. Internet explorer cannot display the webpage. Internet cannot display this website. This problem can be caused by a variety of issues, including:

Internet connectivity has been lost.
The website is temporarily unavailable.
The domain name server (dns) is not reachable.
The domain name server (dns) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an https (secure) address, click tools, click internet options, click advanced, and check to be sure the ssl and tls protocols are enabled under the security section


Posted On: 2009-08-12 . View Related Posts . . View 5 Replies .

Access Apple Server

My company is mac based w/apple servers. I have a couple of windows 7 machines that i'd like to be able to get files from our apple servers. I can see the server in the network group but when i try to log on i get the message: "log on unsuccessful: be sure that your user name and password are correct. " I know that the user name and password are correct. But when trying to log on the login user name always comes up 2x: for example: capitalpresspc/capitalpresspc - when i only need it 1x. Can someone explain why it does this?

Posted On: 2010-08-09 . View Related Posts . . View 3 Replies .

Exchange Server Access

I access my office exchange e-mails at home through an exchange mail url provided to me by my company. I used it with internet explorer 6 in windows xp without any issue.

I face problems with win 7's internet explorer 8. When i open a new mail from exchange server, text editing area of mail body does not appear. Giving an un-editable area with a small red cross at top left conner and "done but with errors" message at bottom.

Kindly help in resolution as i am unable to write new mails and same problem is faced while forwarding and replying the mail messages, ever since i have migrated to windows 7.


Posted On: 2010-02-24 . View Related Posts . . View 6 Replies .

How To Access Home Server Ui?

I am volunteering for an organization where i need to install hp media-smart ex490 windows home server to 5 windows 7 machines. I have really very basic "setting up" question if someone could help please. All i know about it is that i will have to connect it to the modem or a wireless router so that it gets connected to the network. What after that? 

1. How do i access the windows home server (whs) ui on all the 5 machines ?
2. Do i need to buy a separate monitor for the whs (windows home server)?


Posted On: 2010-03-07 . View Related Posts . . View 21 Replies .

Dns Server Problem

I purchased an hp mini netbook at xmas time. It came with windows 7 starter. I use it mainly for work. In the beginning i had no problem with being able to connect with my wireless work network. Just this week however, i have the issue with it connecting. It tells me that it is connected but without internet access. When i run a diagnostic on it, it tells me "dns server may be experiencing problems". When i run further info on it, it tells me the problem found is "your dns server might be unavailable". I'm not very computer savy, so it goes without saying that i have done no changes to my computer since i got it. Any ideas on how to fix this problem?

Posted On: 2010-01-30 . View Related Posts . . View 4 Replies .

Print Server Issues

I have a trendnet te100-p2u1p print server that is not playing well with windows 7 ultimate 32bit. The server worked well with my network, win xp sp3 32bit and the hp psc950xi. Run the server install cd and i can print test pages like crazy. I connected the hp to the win7 machine w/ usb and loaded the windows update driver and it works well. Reconnect the hp to the server, run the server install cd and win7 finds the server and sees the hp. It asks to reuse the existing driver and i say yes. I send off the test page and win7 does not show any errors but nothing is printed.

The local printer port is created and the ip address is correct, looks the same as in xp, but can not get it to print  tried to install new printer and create the same port config but that causes print errors in queue. So there are two different problems. I have installed printers in the past using these methods but not with win7. Any suggestions on where to correct my issues with printing?I almost forgot, i searched this forum for help with the key word p2u1p and found "http://social. Answers.microsoft.com/forums/en-us/gettingreadyforwindows7/thread/bc837a7a-768c-41c5-85a7-9c89a556511f"

But it does not allow me to view the replies. This forum getting ready for windows 7 must have been removed.


Posted On: 2010-06-14 . View Related Posts . . View 5 Replies .

Server Login Failed

I have a server running on windows server 2003, all the other 5 computers are able to map the drive in the server and login with the credientials i have. The problem: i just goit a new computer, custom built, i installed a fresh copy of windows 7 everything works fine, the internet is working, i see all the computers in the network and i also see both servers in the same work-group. I can go in the server and connect to the new computer using the correct login. However, when i try to map a drive on the server, it asks for a login username and password. I type in the right info a million times, and it says login failed, unknown user or wrong password.

But all the other computers connect to the server with the same login. I cannot login the server at all, both servers. Every time i type in the login info, it just says that the login failed and it gives me a refresh ( so i can retype) and if i keep pressing enter with the "wrong password" it does not lock me out or anything, it seems like i'm not even connecting or anything. I am pretty knowledgeable with computer, this has never happened, i have tried everything, this is not something common.


Posted On: 2010-06-18 . View Related Posts . . View 3 Replies .

Dns Server Not Responding

I'm having troubles connecting to the internet wirelessly and using a ethernet cable, when i troubleshoot i get "dns server not responding".

I'm not very good with computers, but just incase here is my ipconfig /all;

Windows ip configuration

Host name . . . . . . . . . . . . : Reece-pc
Primary dns suffix . . . . . . . :
Node type . . . . . . . . . . . . : Mixed
Ip routing enabled. . . . . . . . : No
Wins proxy enabled. . . . . . . . : No

Wireless lan adapter wireless network connection:

Connection-specific dns suffix . :
Description . . . . . . . . . . . : Intel(r) wifi link 5100 agn
Physical address. . . . . . . . . : 00-22-fa-35-0a-56
Dhcp enabled. . . . . . . . . . . : Yes
Autoconfiguration enabled . . . . : Yes
Ipv4 address. . . . . . . . . . . : 192. 168. 2. 154(preferred)
Subnet mask . . . . . . . . . . . : 255. 255. 255. 0
Lease obtained. . . . . . . . . . : Monday, june 14, 2010 7:02:44 pm
Lease expires . . . . . . . . . . : Friday, july 22, 2146 2:01:59 am
Default gateway . . . . . . . . . : 192. 168. 2. 1
Dhcp server . . . . . . . . . . . : 192. 168. 2. 1
Dns servers . . . . . . . . . . . : 192. 168. 2. 1
Netbios over tcpip. . . . . . . . : Enabled

Ethernet adapter local area connection:

Connection-specific dns suffix . :
Description . . . . . . . . . . . : Intel(r) 82567lm gigabit network connecti
On
Physical address. . . . . . . . . : 00-24-81-b0-ea-c3
Dhcp enabled. . . . . . . . . . . : Yes
Autoconfiguration enabled . . . . : Yes
Ipv4 address. . . . . . . . . . . : 192. 168. 2. 103(preferred)
Subnet mask . . . . . . . . . . . : 255. 255. 255. 0
Lease obtained. . . . . . . . . . : Monday, june 14, 2010 7:02:47 pm
Lease expires . . . . . . . . . . : Friday, july 22, 2146 2:01:59 am
Default gateway . . . . . . . . . : 192. 168. 2. 1
Dhcp server . . . . . . . . . . . : 192. 168. 2. 1
Dns servers . . . . . . . . . . . : 192. 168. 2. 1
208. 67. 220. 220
Netbios over tcpip. . . . . . . . : Enabled

Tunnel adapter isatap. {A503c3e1-1a7d-4ee9-b8eb-25c34a7bc2e8}:

Media state . . . . . . . . . . . : Media disconnected
Connection-specific dns suffix . :
Description . . . . . . . . . . . : Microsoft isatap adapter #2
Physical address. . . . . . . . . : 00-00-00-00-00-00-00-e0
Dhcp enabled. . . . . . . . . . . : No
Autoconfiguration enabled . . . . : Yes

Tunnel adapter isatap. {D1340dcf-a761-4539-9fb2-2a598d63927c}:

Media state . . . . . . . . . . . : Media disconnected
Connection-specific dns suffix . :
Description . . . . . . . . . . . : Microsoft isatap adapter #3
Physical address. . . . . . . . . : 00-00-00-00-00-00-00-e0
Dhcp enabled. . . . . . . . . . . : No
Auto-configuration enabled . . . . : Yes

Tunnel adapter teredo tunneling pseudo-interface:

Media state . . . . . . . . . . . : Media disconnected
Connection-specific dns suffix . :
Description . . . . . . . . . . . : Teredo tunneling pseudo-interface
Physical address. . . . . . . . . : 00-00-00-00-00-00-00-e0
Dhcp enabled. . . . . . . . . . . : No
Autoconfiguration enabled . . . . : Yes


Posted On: 2010-06-14 . View Related Posts . . View 5 Replies .

Print Server Problem

I have a d-link dp-300u print server. T has 2 lpt ports and 1 usb. I am using 1 lpt and the usb. Windows 7 finds the print server in network under other devices and even shows it with a name as a computer. Double click on that open it up and allows me to see the 3 ports on the server. If i try to connect at that point the os tells me that it cannot connect. I have gone the route of setting my printers up as ip ports and used a generic network print server listed there but as soon as i reset my router, the print server goes to another ip addr and i lose my printers.

I also tried to statically set the ip address of the server but i cna't get that to work either as the router just assigns an ip and pays no attention to what the server may want to do. Windows 7 finds the server under devices no matter what and finds it under computers. So why can't it automatically connect ot my printers?


Posted On: 2010-01-05 . View Related Posts . . View 7 Replies .

Dns Server Is Not Responding

I use my laptop at home and work. At work i can no longer connect to the internet, my laptop is connecting to the router, but the router isn't connecting to the internet, my isp has confirmed that my service is working fine. The message i am getting is that the "dns server is not responding". I've gone into the ncpa. Cpl and looked at the settings there for "internet protocol version 4 (tcp/ipv4)" and they are as my isp has recommended, all automatic. Obviously i can't get any online help whilst at work - so having to ask all this from home - very frustrating, self employed, and this is killing me! 

I am using an adsl router, and ethernet cable, and i have windows 7. I have tried another router with wireless, and that is doing exactly the same thing. Laptop is connecting to internet at home no problem. Everything was fine last thursday, and on friday it wouldn't work, can't remember if i had any updates on thursday when closing down - but probably. By the way, i'm not very it savvy, and a lot of the jargon used on these forums is baffling to me, please can any answers be written as if you're talking to a total idiot! I can follow commands, but i don't understand what i'm doing!


Posted On: 2010-06-23 . View Related Posts . . View 4 Replies .

Hp Photosmart C4480 - Printer Not On Server

Have downloaded patch from hp but still stays "printer not on server". I upgraded my xp desktop to w7 which is connected to hp photosmart c4480 all in one and this computer prints ok. My laptop was upgraded from vista to w7 and is on the homegroup. I can access all the libraries no problem but when i try to print it states "printer not on server".

Have checked that printer is shared and have downloaded recent patch from hp, have deleted old drivers and installed latest w7 drivers from hp, have run printer troubleshoot and network troubleshoot which says everything is working ok? What am i missing ?


Posted On: 2010-05-08 . View Related Posts . . View 3 Replies .

Server Is Busy Program Not Responding

Recently i have noticed that when i am working on my laptop, windows 7 stalls and gives an error message of server busy and program not responding. I have purchased the system in april and have only added 3 programs that i use for work. When i use the self help or the troubleshooting program, the system says there is no problem and to get help online. I end up manually shutting down and restarting the system. It works for a while but does not remain consistent.

I have also noticed my outlook program seems to blink in the search section of the menu even though i have not used this feature. Can anyone provide any insight as to why this is happening? Oh i almost forgot, on the help menu it states there is a link to assist me and suggest that i "click here" for the answer. Well there is nothing to click on and when i click technical support link, it stalls again. Help me please.


Posted On: 2010-06-17 . View Related Posts . . View 2 Replies .

Hp Laserjet 5m Drivers For Print Server

I work for a small private college and we have several old hp laserjet 4, 5 and 5m printers on campus. There are all network printers that are managed by a central print server. We have started to deploy windows 7 - 32 and 64 bit. We have not been able to find a driver to install on the print server. I know that if the printer were connected directly, it would automatically install, but we need an . Inf driver. Has anyone been able to work around this kind of problem?

Posted On: 2010-06-09 . View Related Posts . . View 5 Replies .

Mapping Drive With Server 2003

I cannot map a drive to my server (server 2003). The error i get is that the password is wrong which it is not. Trying to logon as server. Administrator. I can even access the server remotely from windows 7, just can't map the drive. I have tried not having anything in the credentials manager and have tried adding the server administrator account in the credentials manager, so do not think that is the problem. I am a network administrator so i do know how to do this, it just is not working. Both computers are in the same workgroup.

I do try to map using the administrator user account of the server to connect with. I have used wireless and cable as the connectivity. This is something i have done a million times in the past, this just is not working. It has to be something different in windows 7. The shared drive was used on my vista machine and i know that the share has the proper settings, or at least they were the proper settings for vista.


Posted On: 2009-10-17 . View Related Posts . . View 4 Replies .

Server You Are Connected To Is Using A Security Certificate

The server you are connected to is using a security certificate that cannot be verified. The target principal name is incorrect. Do you want to continue using this server? Brand new computer running windows 7 64-bit, outlook and office 2007 installed, initial problems with temporary user profiles, followed advice and removed user profiles from system registry and all seemed to be fine.

Computer been running for about one week with two user profiles and now i am suddenly getting an error message when i start up outlook and occasionally when browsing the internet, it reads:
The server you are connected to is using a security certificate that cannot be verified. The target principal name is incorrect. Do you want to continue using this server? (If i hit yes i can then send emails).

When i open view certificate it says: this ca root certificate is not trusted. To enable trust, install this certificate in the trusted root certification authorities store. (Issued to and by: cisco appliance demo certificate - valid from 2/10/2009 to 3/10/2019). Problem is i don't know what the certificate is, what i need it for, how to locate it, how to move it etc i have read some forums but they start getting too technical. I need easy step by step help.

I tried uninstalling outlook 2007 and reloading and clearing ssl states in internet options and reseting to default(as suggested by someone) but it made no difference. Problem is when you leave the store with new computer nobody wants to know you if you need help! Can anybody please help?


Posted On: 2010-04-29 . View Related Posts . . View 3 Replies .

Access File Sharing On Server

I have windows 7 home and i want to access file sharing on server.

Server
- Not ad
- Create folder and set share permission for user in server. After i  map network drive from windows 7 home to server - > example 10. 0. 0. 100 share (everyone not full control) in folder share have set folder permission for some user only. Select map drive with different user account and it keep ask user and password? I make sure that i type

User: servernameuser , pass:password
User : 10. 0. 0. 100 user
Pass : password


Posted On: 2010-03-23 . View Related Posts . . View 2 Replies .

Connecting Xp To Win7 File Server

I have a windows 7 ultimate desktop that serves as my computer most of the time but also the home file server. I also have a windows vista ultimate laptop and an xp pro laptop. I have the same user accounts and passwords on all computers. The vista laptop works daily with the windows 7 computer as it's server for files and all seems to work well. However the xp laptop is not used much and is off most of the time. When i do try to use it i get "access denied" errors when i try to access the files on the windows 7 desktop. Rebooting the xp computer has no effect but rebooting the windows 7 computer resolves the issue for this current time and all work well.

How do i fix this permanently?


Posted On: 2010-08-05 . View Related Posts . . View 2 Replies .

Server Service Error 1899

Whenever i try to start the server service, i receive this error:"windows could not start the server service on local computer. Error 1899: the endpoint mapper database entry could not be created. "This error occurred after a series of events. Firstly, i left my computer for about an hour and returning after an hour my computer's fan is really loud (indicating high cpu usage) and my task bar and window borders are back to the default windows aero style (light blue). I right click the desktop and go to personalize and the computer hangs.

After this i get a bsod which after 10 seconds the computer restarted itself not giving me a chance to take details. I then started my computer again and when the "starting windows" bar comes up after the bios is loaded - the 4 colored orbs do not appear (the logo does not appear). I wait a long time and then decide to restart my computer into the diagnostic sector (in search for a better name). It claims that windows could not start up properly but then when it was 'resolving problem' i get another bsod this time a page_fault_in_nonpaged_area.

I read up on this which stated that ram was an issue, which i initially doubted as my ram was pretty new. Each successive start up of windows resulted in a bsod after logging on. In the end i removed a stick of ram which stopped the bsods but now a bunch of internal errors that were not there before this series of bsods are appearing. I've searched quite a bit on the internet and have found no solution regarding this - was hoping someone would have a possible solution.


Posted On: 2010-04-15 . View Related Posts . . View 3 Replies .

Problem Opening Files On Server

We have a small network; windows 2008 sbs and 10 workstations. 2 of the workstations are running windows 7 enterprise. Only those 2 workstations that are running windows 7 are having the following problem:intermittently, when attempting to open files from the server (word and excel definitely, possibly other types) explorer will lock up. The document will not load. Only way to break out of it is to use task manager to kill explorer.exe and then reboot. Ll workstations and the server are updated with current ms updates. We don't have any errors in event logs when this issue occurs. We've disabled antivirus to no avail. Any ideas on what to look for?

Posted On: 2010-06-07 . View Related Posts . . View 2 Replies .

Sql Server Setup Failure

Sql server setup has encountered the following error:

A failure was detected for a previous installation, patch, or repair for instance 'mssqlserver' during configuration for features

[Sql_replication_core_inst, sql_engine_core_inst, mpt_agent_core_cni, sql_fulltext_adv, analysis_server_full, rs_server_adv, ]. In order to apply this patch package (kb968369), you must resolve any issues with the previous operation that failed. View the summary.txt log to determine why the previous operation failed.

A failure was detected for a previous installation, patch, or repair during configuration for features [sql_browser_redist, ]. In order to apply this patch package (kb968369), you must resolve any issues with the previous operation that failed. View the summary.txt log to determine why the previous operation failed. Error code 0x84b20001.


Posted On: 2010-01-04 . View Related Posts . . View 2 Replies .

Dns Server Responding Problem

I recently added my hp notebook with windows 7 to my home network. Originally, both computers were visible on the network (my pc is running xp), but now it goes in and out. Troubleshooter says "your computer seems to be correctly configured, but the device or resource (dns server) is not responding. " I tried restarting the router and computers (which should inform you of my knowledge level haha), but this did not help.

Is there anything i can do on my own before heading out to best buy? Also, and i don't know if this is related but it began at the same time as the network issue. The notebook has run checkdisk several times upon start up, half the time freezing at the countdown. It hasn't happened the last two times i rebooted, so i don't know what that was about.


Posted On: 2010-01-22 . View Related Posts . . View 3 Replies .

Win2k Server Registry Hive

Was only able to select criteria for my problem as win2k server was not listed in the list. Problem is, registry hive is increasing. I have identified the problem (hkey_current_userprintersdevmodeperuser) and removed all the unwanted printer info on that page. Able to see size difference via command prompt by using the dureg -a command. But current registry size at system properties>performance option does change or reflected with current reg size after server reboot. How do i reduce the reg size at system properties.

Posted On: 2010-05-14 . View Related Posts . . View 2 Replies .

Dns Server Isnt Responding

We have an air card through alltel wireless that we use on the main computer. We connected a netgear router to the main computer (desktop) so we could have wireless on the laptop. This worked for a couple of hours but then the laptop was disconnected from the wireless somehow. Now the laptop says it is connected to the internet but when we try to access anything via the web it says "internet explorer cannot display the webpage. When i click "diagnose connection problems" it says "dns server isnt responding. " This is getting very frustrating!

Posted On: 2010-07-28 . View Related Posts . . View 2 Replies .

Speed Of Accessing A Network Server

I have a macbook. It is running os x, and windows xp and windows 7 on the same machine so i feel this is a good comparison. I have an in home wireless network through a usrobotics router. Attached to that router is a 500gb little file server. It's formatted fat32 and it contains many gbs of music. Anything attached to the router uses cat6 ethernet cables. When i attempt to access this server with win7 it can take over 1/2 an hour for it to list the contents.

When i attempt to access this server with win xp it can take only a few minutes. Os x grabs the data in only a few seconds. My questions:1)is there something in win 7 i should be tweaking to get it to access the data faster?2) is there a better way to setup the server for win 7?3) anything else you might think of.


Posted On: 2010-07-13 . View Related Posts . . View 3 Replies .

Hotmail Mail Server Smtp

What is the hotmail mail server smtp. I'm installing sysaidit helpdesk software, (http://www.Ilient.com/freeware.htm) which is web based. I downloaded the exe file, and i'm attempting to set-up the software, but the mail server smtp is not working. What is the smtp for hotmail (www.Hotmail.com). This will tie into sql, but i'm using the free version fior know. I tried to install this software on server 2008 r2, but the response was the file is corrupt. I'm using windows & ultimate x86 version.

Posted On: 2010-08-02 . View Related Posts . . View 4 Replies .

How To Logon To Win 2000 Server ?

How can you logon to windows 2000 server using window 7.

Posted On: 2010-04-03 . View Related Posts . . View 2 Replies .