Advertisements:




File Error Copying Vob Files To Drive


I have been trying to copy a few . Vob files from a non-copyrighted dvd to my hard drive and keep running in to the same problem. After the transfer is complete, it looks like the full file is there but it shows that the clip length is only :13 seconds rather than the 35mins of the original file. Sure enough when i try to watch it, the clip appears corrupted, jumping around before ultimately freezing. Is this an error in the transfer, of the original dvd or something in 7 i just don't know about. I've only been using 7 for a few months and this is the first time i've tried to transfer vob files on this particular laptop.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


How To Eject Disc From Drive After Copying Files ?

How to eject a disc from the disc drive after copying files to the disc? Ejecting disks in media player. What is the easiest way to eject a disk from the disk drive after i finish copying a disk? 

Posted On: 2010-06-27 . View Related Posts . . View 2 Replies .

Copying Files To A Usb Drive Stops

I have a windows 7 (home premium 64 bit) laptop and two usb drives (one 16gb kingston data traveler and another 4 gb cruzer). I also have an xp laptop. On the xp laptop i can use both the usb drives to copy files of any size. Both are partitioned ntfs.

But on the win 7 laptop only the 4gb cruzer is working without a problem. Whenever i try to copy a file to this 16gb drive from the win 7 the copying starts of without a problem but stops somewhere in between. It does not proceed after wards. I tried a number of solutions including a hot fix suggested in this forum and still having the same problem. If i am copying a very small file (few mbs) it can finish copying without any problem.


Posted On: 2010-01-19 . View Related Posts . . View 20 Replies .

.vob Files In Media Center Only Plays Audio, No Video

Windows 7 media center only plays audio from vob, no video. However, vob files play fine in windows 7 media player. What gives? I have vob files in a video_ts folder. Windows 7 media center generates a thumbnail for them but when i play them i got audio but no video. However, when i play them in windows media player they will play with no problem. Can someone assist me in resolving this issue?

Posted On: 2009-10-25 . View Related Posts . . View 4 Replies .

Blue Screen Error While Copying To Usb Drive

Every time i try to copy several files to a external usb drive ; after a while win 7 x 32 crash with this blue screen :0x00000044 (0x88c96d98, 0x00000eae, 0x00000000, 0x00000000).

Posted On: 2010-05-05 . View Related Posts . . View 3 Replies .

Explorer Stop When Copying Files

Windows explorer (and some parts of windows itself -_-) grinds to a stop when copying files from my computer's hard drive to an external hard drive. I am currently using windows 7 enterprise k (x86)

This is a problem i've been seeing from windows xp through windows 7. When i try to copy some files from my computer to my external hard drive windows explorer starts copying the file, then suddenly just stops.

I've seen a lot of programs crash on my computer, and i usually just press ctrl+shift+esc (sorry, i don't know what z‘—'¦¬z is called in english oss) and kill the process that crashed.

But when i try to kill explorer.exe:

1. It won't die. i.e. It's still in the process list, and i can still see the window that crashed
Even if i kill the mother explorer.exe (not just the one that shows me the window, the one that shows me the taskbar and desktop etc. ) The taskbar disappears, but when i start it up again the explorer.exe that crashed is still there.

2. It stays there forever. I've tried ignoring it all day long, and it's still there.

3. Windows becomes very buggy. After explorer.exe crashes, a lot more bugs that wern't there spring up, although i don't remember exactly what. I seem to remember that there were a lot more of those in windows xp than windows 7.

4. Windows doesn't even shutdown. I try pressing shutdown in the start-menu and it either takes forever to understand i wanted it to shutdown, or sometimes ignores me completely. I've also tried entering "shutdown /s" in cmd.exe and it does shutdown, only to get stuck on logging off.
Same with just pressing logging off, too.

And every time this happens, if i force-shutdown and try the same file again, it won't work that time either. Sometimes copying the file to the root of my external hard drive and moving it to the directory i originally wanted to copy it to works, but not always.

This is very, very irritating and i wish there was a way to fix it. I am also posting this question in the korean forum. Ps. I saw a answer to a similar question on the korean forum, and it told the questioner to update to vista sp1 or 2. I've been installing every update (except the optional ones) on my computer and i'm sure thats not the problem.


Posted On: 2010-01-29 . View Related Posts . . View 2 Replies .

Issue Copying Files Between Hard Disks

I am experiencing issues copying files between hard drives on my computer. I've been having this problem on windows 7, and windows vista, but have never encountered it on xp. It seems there are several similar threads, but i think i've noticed a few quirks in my own experience. I have several drives, between 500 gb ~ 1 tb. Problems arise when i try to copy a folder with a large number of files (typically pictures, folders around 4gb in size).initially, the transfer rate would be at the hd's burst speed, somewhere between 90mb to 150mb.

Speed would decrease to around 30mb, or even lower. The transfer eventually becomes so slow that the operation would take hours to finish. If i try to cancel, it would take minutes to do so. The computer would perform sluggishly for a long period afterward, with intermittent lag until i reboot the system. This occurs regardless of the source and destination drives. On certain samsung drives, this problem actually lead to data corruption on both the source and destination drives, and i/o error messages. Chkdsk will run at startup, attempt to fix the problem, but the data would be lost or the drive unreadable. I've since tossed the samsung drives for wd, have not had i/o errors, but the file copying problem persists. I've also disabled chkdsk at startup for all drives. My hardware drivers and bios are up to date.computer is free of viruses and malware.

I have no other troubles with windows 7. Curiously, if i compress my folders/files to a single rar file, i do not have problems copying them (transfer rate stays steady at 30~50mb). This leads me to believe that this is not a hardware issue, but a problem with explorer, and that it pertains specifically with the number of files being transferred rather than size. (But unpacking those files also lead to poor performance sometimes. )Is this a known issue that will be fixed?  I really like win7, but because i work with large number of files and numerous backups all the time, stability during file copying is a must. I may have to revert to xp, or use another os entirely.


Posted On: 2010-06-05 . View Related Posts . . View 5 Replies .

Copying Of Large Files To Portable Hdd

Sir i am facing this problem from many years and after a lot of search and efforts i am asking for your help to sort out the issue. Many times its happens that when we try to copy the large file like 8-10gb . Iso images to our portable usb hard disk during the process it gives error and hdd goes offline. What is the issue god know's.

I have tried disabling the "enable write caching on the disk" features and locate the following registry key: hkey_local_machinesystemcurrentcontrolsetcontrolsession managermemory management registy change. Still not got any particular solution. In windows xp it give error "wite delayed failed" but in windows 7 gives unable to find destination path. Please help me to sort out this issue. I am very much sure that this is not related to physical problem as after trying it 2-3 times the file easily gets copied.


Posted On: 2010-03-15 . View Related Posts . . View 13 Replies .

Error When Trying To Copy/paste File From External Drive

I have a new computer with a windows 7 professional 64-bit operating system (500gb drive; 8gb ram). I have two external drives, each of which has a vpc on it. I use the vpcs for training purposes. They are virtually (no pun intended) identical, so one functions as a backup if something goes wrong with the other. One vpc has problems, so i want to overwrite it with the . Vmc and . Vhd files from the other vpc.

I've done this before (on my previous computer, which had windows xp-pro). I successfully copied the . Vmc file and the hard disk 2 . Vhd file, but it won't copy the hard disk 1 . Vhd file. I get an error message (error 0x8007045d) that says there is an i/o device error. How can i fix this so that it will copy the file?


Posted On: 2010-06-05 . View Related Posts . . View 4 Replies .

Usb Flash Drive Error - Volume Does Not Contain Recognized File System

I plugged in my usb flash drive into a computer using windows 7. It always prompts me to scan and fix or cancel. I canceled every time, but i got annoyed with it popping up every time, so i told it to scan and fix. A loading screen came up so i patiently waited. After completion it asks to format my usb flash drive. I can't format it though because i have homework files and all my other personal files on there. So i canceled the format, but every time i plug it into my computer it asks t format it. I even plugged it into a computer running on windows xp and it wanted to format it.

When i try to run it without formatting it it says, "e: is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. " My question is, what did windows 7 do to my flash drive and how do i recover my data?


Posted On: 2010-05-31 . View Related Posts . . View 2 Replies .

Error - Disk Drive Is Full Or Write Protected While Transferring Files

"error: disk drive is full or write protected" while transferring files to windows xp and no admin rights while transferring files to windows 7". Admin permissions uac win 7 external hdd, i have read alot about this subject and have used some of the advice but i am still unable to transfer my stored files on my external hdd from my lost work laptop, in assents i have a replacement laptop os win xp an external hdd with files stored from the lost machine and a home machine os win7 every time i try and restore the files back to the new work machine it has an error of the disk drive is full or write protected.

If i try the same on th win 7 machine the error is that i don't have admin permissions i have tried disabling uac giving myself ownership of the files i have admin permissions in my profile i have tried the cmd prompt cacls and takeown and this did scroll through the files when executed and appeared to do something but i still cannot copy or transfer the files in any way, i have  been through the security setting and changed them but still cannot gain access, incidentally i have backup files from other machines on the same hdd and these are fine i can do what ever, i have copied the settings from these files but still no joy.


Posted On: 2010-06-21 . View Related Posts . . View 2 Replies .

Files Send To Dvd-rw Drive On Network Results In Deleted Files

"send to dvd-rw drive" when the source files are on a network drive results in deleted files! Windows 7 rc 7100. Have a mapped drive to another computer. I opened the folder, right clicked on a group of .doc files. I choose "send to dvd-rw drive". Responded to the prompt of "use like usb drive" or use in a cd/dvd player by choosing the 2nd choice. Then was faced with a prompt that filename.doc is no longer in this location cancel/retry/skip. All the files were gone! Not in recycle bin of either computer.

Posted On: 2009-11-23 . View Related Posts . . View 2 Replies .

When I Install File It Will Go To Program Files (x86)

I'm now using a 64 bit window 7 home premium, but why when i install a file it will go to the program file(*86). How can i install it at the program file only? How to install it?

Posted On: 2010-03-24 . View Related Posts . . View 2 Replies .

Editing Xml File In Program Files Folder

I have a .net program that reads an xml file located in the application startup folder. Under windows xp, i can simply go in and edit this file to change settings, etc. In windows 7, it is driving me crazy. It looks like i am editing it (running notepad as administrator) and writing the file back to the folder. But then i start the program, and the settings remain unchanged. I've even tried deleting the xml file completely to no avail - the program should give me an error if the file cannot be found (it does this correctly under xp), but it somehow seems to find the original file even though i cannot see the file in windows explorer or find it from a dir command in a dos box.

Posted On: 2010-08-06 . View Related Posts . . View 3 Replies .

Trouble Copying Music To Cd

I am trying to make a copy of some music onto a audio cd. I drag my selection to burn list, click on start burn and i get a message in a box saying "windows media player encountered a problem while burning the file to the disc. " Pressing the "web help" button brought me here. How can i find out what the problem is and how do i fix it. I have made several attempts to copy this music. Either nothing is on the cd or it just does not play on a cd player.

Posted On: 2010-04-05 . View Related Posts . . View 2 Replies .

Easy File Transfer Won't Open Files

I am upgrading from xp (32 bit) to win 7 home premium (64 bit). I downloaded easy file transfer for xp 32 bit and put my files on a jump drive. I installed win 7 and ran easy file transfer and tried to get the files off the jump drive and it tells me easy transfer can't open the files. Also, i have a clone of my win xp on another hd can i use win 7 easy file transfer to get the files directly off that hd? If so, how? I don't see an option for that in easy transfer.

Posted On: 2010-02-25 . View Related Posts . . View 2 Replies .

Explorer Crashes When Copying From Usb

I cannot copy files from a usb flash drive or my digital camera with windows explorer. I am running windows 7 professional. Both copy & paste and drag & drop cause explorer to crash. "Windows explorer has stopped working" is displayed and the details say: 

Problem event name:    bex64
  Application name:    explorer.exe
  Application version:    6. 1. 7600. 16450
  Application timestamp:    4aebab8d
  Fault module name:    wzshlx64.dll
  Fault module version:    4. 1. 8477. 0
  Fault module timestamp:    4a082b96
  Exception offset:    000000000000b2f7
  Exception code:    c000000d
  Exception data:    0000000000000000
  Os version:    6. 1. 7600. 2. 0. 0. 256. 48
  Locale id:    1033
  Additional information 1:    d8b0
  Additional information 2:    d8b05e2237eae0ac5607ef1bc80a0355
  Additional information 3:    4d79
  Additional information 4:    4d798ca092b4c32bb8eea4ccb43ece64

It is very frustrating - i can't clean off my digital camera or even put them on a flash drive and drop them on my pc. Has anyone experienced this? Did i accidentally change a setting or registry value or something?


Posted On: 2010-07-12 . View Related Posts . . View 2 Replies .

Problem Copying A Large Folder To Dvd

I'm using a drag and copy of a large folder (~3gb) onto an external usb dvd. The folder contains sub-folders of miscellaneous data (photos etc). If i select and copy say the 10 sub folders (at once) then no problem. If these same folders live under a single higher folder then the copy gets half way through then everything stalls and i need to hard boot the computer. I have the following useful relevant updates installed kb975617 and kb976972 installed. Any suggestions? By the way. If you are experiencing painfully slow dvd file burning look at kb975617 (issue 3)

Posted On: 2010-06-16 . View Related Posts . . View 4 Replies .

Swap Hard Drives After Copying Win 7 To Another Hdd

I installed windows 7 on my 1st 1 tb hard disk. I partitioned it after wards and could not get the c partition smaller than 1/2 tb (because files are blocking it at that point) with the remainder 1/2 tb calling itself e, which i can not change to d? Is it possible to copy windows 7 on to my second 1 tb hard disk from the first (which i will partition beforehand to 50 gb and 950 gb, which i prefer) and then after that swapping the 2 hard disks internally?

Posted On: 2010-01-31 . View Related Posts . . View 2 Replies .

Data Copying Fails, Usb Disks Keep Getting Restarted

We bought a new hp probook 4520s with windows 7 professional. From the very beginning we have been experiencing problems with usb devices. Our usb flash disks and an external westerndigital usb device (harddisk) often get restarted in windows 7, and errors reported on them, although all of them work properly on any windows xp system (computer) we try.copying to and from those disks often is interrupted and fails. An usb modem has not always functioned, either.

We reinstalled windows 7 - it did not help. The seller checked the hardware and found no problems. They say their usb devices work fine with this computer. In fact, sometimes it seems that our usb devices also work fine with it - however, this does not last long. Usb disks usually get restarted when data copying is just underway. Viruses, malware, etc, have been checked - nothing found. Autorun files turned into txt files - it has not helped, either.


Posted On: 2010-08-14 . View Related Posts . . View 2 Replies .

File And Data Saving To External Drive

I would like to save all my work direct to an external drive instead of main 'c' drive so that i do not loose any work and keep 'c' drive just for operating system and drivers etc.

Posted On: 2010-08-15 . View Related Posts . . View 4 Replies .

What Is Readyboost File On Lexar Jump Drive ?

What is the "readyboost" file on lexar jump drive? My lexar jump drive contains a very large file called "ready boost". I do not know what it is. I tried to delete it and it will not delete. Message says it is in use as a systems file. How can i get rid of "ready boost"? Lexar jump drive has a very large file (takes up nearly all of space on jump drive) called "ready boost". I don't know what it is and i can not delete it. Message says in use as system file. How can i get rid of it?

Posted On: 2010-05-31 . View Related Posts . . View 5 Replies .

File Manager Will Not See External Hard Drive

I can't get file manager to see my maxtor one touch iii mini external hard drive. It shows up in the devices window. But in the computer management window it won't initialize.

Posted On: 2009-10-31 . View Related Posts . . View 5 Replies .

How To Open 1 Outlook Pst File From Backup Drive ?

How 2 open 1 outlook pst file from an backup drive. I need to restore lost files from 1 old pst file & then go back to my current and existing pst file when done. Can anyone please tell me how to do that step by step.

Posted On: 2009-12-08 . View Related Posts . . View 4 Replies .

Hard Drive With Raw File System / Format

External hard drive file format is raw and not ntfs. How can i get windows 7 to read raw hard drives without having to format the hard drive due to important work on it? I have put the hard drive onto a xp and vista machine and can read the hard drive but not with windows 7.

Posted On: 2009-12-08 . View Related Posts . . View 8 Replies .

Does Win7 Automatically Use Page File On Least Busy Drive ?

Windows 7 page file: if i have more than one drive, each with a page file, does win 7 automatically use the one on the least busy drive? I have 3 drives, c, d and e. Photoshop says to ideally set its scratch disk to a fast drive that is not the operating system, temp/tmp or page file drive. This would be easier if i had a page file on each drive and if win7 does automatically use the one on the least busy drive (or is that an urban myth)?

Posted On: 2010-02-04 . View Related Posts . . View 2 Replies .

Cannot Transfer Large File (5gb) To Flash Drive

I have windows 7 and am trying to transfer a 5 gig file to a smart drive (64 gig), and it says not enough disc space and won't copy or transfer. How do i do this, there is lots of space available. Can't transfer a large file (5 gig) to a flash drive, says file to large and flash drive is 64 gig with lots of empty space.

Posted On: 2009-11-15 . View Related Posts . . View 4 Replies .

File For Cd/dvd Drive Unknown / Upgrade Issue

Running windows vista home premium 32-bit operating system, i have windows 7 home premium upgrade for vista, i cleaned and deleted a lot of junk before install, and accidentally deleted some things, like hardware diagnostic tool, i tried using system restore wouldn't correct problem. Went to install windows 7, f/drive wont open even manually, cd/dvd driver says working properly, no path and file for f/drive unknown. If i can assign a path and file for the drive i can upgrade and should take care of file problems?

Posted On: 2010-05-07 . View Related Posts . . View 6 Replies .

You Don't Have Permission Warning When Save File To C: Drive

I need to save a file to my c: drive and i am using windows 7. I know how it is not a good idea to save files to your c: drive, i just need to know how to do it. I have tried taking ownership of the drive and lowered the uac all the way, and i still get the 'you don't have permission' warning.

Posted On: 2009-12-11 . View Related Posts . . View 2 Replies .

Transferring Outlook 2007 .pst File From Usb Drive

Transferring outlook 2007 . Pst file from usb drive to the outlook file system. In installing windows 7, due to a file fragment i could not find and delete, i was forced into a complete new install instead of an upgrade, and lost my outlook 2007 . Pst file. I have an earlier . Pst file on an usb drive, but the instructions provided do not work with windows 7. Windows east transfer instructions do not work either. How do i transfer?

Posted On: 2009-10-29 . View Related Posts . . View 3 Replies .