Advertisements:




Unable To Load Device Driver Error Code 39


Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) this applies to the generic disk drives not the dvd drivei am running windows vista service pack 2. For reasons unknown to me i got the error code 39 on my dvd drive and my generic disk drives after a reboot. I uninstalled the software i had just installed. Didn't change a thing. Anyway, i was able to go into the the registry and delete the upper and lower device filters for the cdrom and now have my dvd drive back. I tried running system restore and it won't work.

It completes ok. But says it encountered an error so could not restore the system (this is regardless of what date i chose to restore to). This is the second time this error 39 has happened to me and a system restore fixed it the first time. My hard drive is listed in with the drives with the error 39, but doesn't have the same error, although it uses the same drivers.

I know this is an issue with the registry. But i am leary about deleting the limits filtering for the generic drives for fear of losing my hard drive. Now, my question is: if i remove the upper and lower filters for the disk drives and reboot, am i going to hose my hard drive?


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Error - Windows Cannot Load Device Driver Code 31

Error "windows cannot load device driver code 31" with realtech lan port and pantech um175 usb. Just built a new deluxe windows 7 system two weeks ago. I loaded windows perfectly on may 5 . I also did a hardware disk driver update and everything worked great. Automatic security updates took place one week later on 05/12/10 and my realtech rtl8111dl lan port and my pantech um175 usb broadband model stopped working. Both say the driver is not installed or working.

I tried re-installing both multiple times without success. Occasionly the device manager will say invalid parameters. I can usually correct this type of thing but i can't get any internet connection device to function well enough to get connected for analysis or updates.

I have downloaded the latest drivers on another computer and tried them unsuccessfully. Each time i try to reinstall, the device gets one number higher. I am up to #5 behind the realtech lan controller name. I am out of ideas. Can you help. Thank you in advance!(Windows 7 ultimate 64 bit, biostar th55b-hd, i5-650 cpu, 4 gb ocz memory)

Pciven_10ec&dev_8168&subsys_23091565&rev_03
Pciven_10ec&dev_8168&subsys_23091565
Pciven_10ec&dev_8168&cc_020000
Pciven_10ec&dev_8168&cc_0200


Posted On: 2010-05-24 . View Related Posts . . View 10 Replies .

Error Code: 1275 - Cannot Load Driver Phlashnt.sys

Sony vaio, vgn-fz11s laptop. For a new battery i am supposed to install the driver which were included. When i do so, i get the following message. I have tried, running as administrator, log in as administrator but it is always the same. It is a clean windows 7 installation, there is no sony software on it anymore. The error message is: cannot load driver c:windowsphlashnt.sys. Please check your accounts, if you have no administrator priviledge, please login again. The driver has been blocked from loading. Error code: 1275.

Posted On: 2010-05-19 . View Related Posts . . View 3 Replies .

Error Code - 32 Driver Service For This Device Has Been Disabled

Error code 32 - a driver (service) for this device has been disabled. An alternate driver maybe providing the functionality.

Device type dvd/cd rom drives
Manufacture (standard cd rom drive)
Location bus number 1, target 1d 1. Lun 0
My computer keeps saying everything is up to date and working fine.


Posted On: 2010-05-06 . View Related Posts . . View 9 Replies .

Dell Webcam - Windows Cannot Load Device Driver

For some reason my dell webcam central has gone missing i finally found it under my pc properties and it keeps saying that it can not load the device driver for this hardware the driver may be corrupted or missing ( code 39) can anyone tell me how to fix this and how to get my dell webcam working again?

Posted On: 2010-07-30 . View Related Posts . . View 2 Replies .

Dvd Device Driver Blocked - Unable To Use Device Code 48

I get a code 48 message. I have an intel d945psn board that has run w2000 on a eide hard drive. I upgraded to windows 7 with a new sata hard drive clean install, but transferred files with pc mover. Now my dvd burner(s) don't work citing the infamous code 48 and saying that the software for this device has been blocked from starting because it is known to have problems with windows.

Aren't cd/dvd device drivers pretty standard, and included with the bios?  How do i deal with that problem. I have tried to update drivers through "driver access", but the problem persists. The device doesn't even show up in windows explorer or my computer, but can be seen in device manager and on the cmos menu. The same is true of my second, identical sata hard drive. It appears that some of my important system drivers have been blocked.


Posted On: 2010-03-01 . View Related Posts . . View 2 Replies .

Device Malfunctioned Error Code - 43 - Usb Device Not Recognized

I purchased a new computer with windows 7.initially my ipod worked fine with this computer. It still charges the ipod but nothing else. In addition it will not work on my old computer.

1. I have completely uninstalled and reinstalled itunes.

2. I reset the device losing all of my music.

3. I have gone to device manager and the ipod shows up as unkown device. I have stopped the device driver and rebooted.

4. I have tried to have attached to my old computer update and i receive the exact same error and usb not recognized message.

5. Other devices work fine on the usb hub, in addition i have tried the other usb hub.

All of the above measures have failed. This all started when i was having problems updating my music to the ipod, and i chose the restore function on the summary page of the itunes software, with the device attached, and recognized. Since then nothing? Initially when the device was attached after the restore option was chosen, i got need to attach to a 2. 0 usb  high speed hub, error message? It is a 2. 0 usb high speed device. I have reviewed other questions in this forum, on apples forums, all with the same results, nothing.


Posted On: 2010-01-26 . View Related Posts . . View 2 Replies .

Snap-in Failed To Load With Error Code 0x6d9 At Firewall

I have a problem few days now. I try to open my windows 7 firewall but nothing happens. I'm trying then to open the windows firewall advanced security but i get an error that the 'snap-in failed to load with error code 0x6d9. I'm searching for a solution for hours, i try a several tips but i get no results. I also did a full scan with security essentials, super antispyware, malware bytes, eset on line scanner, tdss rootkit removing tool but the computer seems to be clean.

Everytime now i restart i take message on start up that the "the windows could not connect to the group policy client service" and when i open a program after some resets on the firewall i did while try various tips from forum's, i get the message if i want to allow on the firewall the each connection of specific program.


Posted On: unknown . View Related Posts . . View 12 Replies .

Device Driver Are Not Installed Code 28 And 22

I have laptop run windows 7 pro and the blue-tooth not support update and keep receive error
Code 28 and code 22.


Posted On: 2010-02-12 . View Related Posts . . View 2 Replies .

Driver For Base System Device Is Not Installed Or Missing Code 28

I have just recently re-installed window 7, unfortunately i could not communicate anymore through yahoo messenger due the driver of base system device is missing "code 28".could you please advise me what to do with this?

Posted On: 2010-01-19 . View Related Posts . . View 2 Replies .

Error - 7026 - Roxio Rxfilter Driver Fails To Load At Startup

I just bought dell xps studio and error in event as follows rx filter driver fails to load at startup serv control manager 7026. I have other post but i would like to be sure before i start uninstalling stuff if possible and i was wondering anyone ever had same issue with roxio and how would i locate this driver and identify? Also what purpose does this driver serve has anyone ran across before?

Posted On: 2010-05-12 . View Related Posts . . View 6 Replies .

Code 43 Error For Usb Device

Running windows 7 on a dell inspirion usb wire optical mouse has been working without difficulties for last three weeks since we purchased it. This morning device not working message appeared and the mouse stopped working.

The mouse works well on other systems (xp) as we checked to ensure it was not the mouse. Uninstalled all the usb drivers, and unplugged any usb devices, restarted and windows 7 which reinstalled usb drivers. The driver installation reports successful installation on controllers and root hub however indicates a device failed at the end.


Posted On: 2010-02-03 . View Related Posts . . View 3 Replies .

Win 7 Cannot Load Device Drivers

I've been having a problem with windows 7 freezing, hanging and not starting up for the past several weeks now. For the first few weeks after i installed in, windows 7 worked fine, but all the sudden in began freezing and hanging.

I've eliminated the possibility of my hardware being bad or my drivers being wrong; i've run multiple diagnostics on my hard drive, ram and others (memtest86, spinright and checkdisk, all came back with good results) - i've also scanned for malware (found none) and tried system restores and even reinstalled the os twice. Each time the problems come back.

I enabled boot-logging and found that on most startups, windows fails to load many or some device drivers. How can i fix this? When the system starts up, it works alright, but usually hangs or freezes within an hour. Usually it freezes during the windows logo screen or the "welcome - please wait" boot screens.

I've also noticed that the machine is far more prone to hang and freeze when on high performance or when plugged into my ac adapter.


Posted On: 2009-12-30 . View Related Posts . . View 3 Replies .

Error Code - 10 - Usb Device Do Not Autoplay

Autoplay won't run when i plug in a usb device. Device manager says cant start (code 10).

Posted On: 2010-07-09 . View Related Posts . . View 4 Replies .

Apple Mobile Device Driver Issue With Mtp Device Driver

How do i get windows 7 to accept the 'apple mobile device driver' instead of the 'mtp device driver'? It is driving me nuts! Frequent itunes sync issues occurring. Suggestion is that windows is treating as a camera instead of ipod which makes sense given it asks me if i want to import pictures each time i connect the ipod. I need to get it to update driver from mtp to apple mobile but cannot get it to do it as it keeps saying no compatible driver in the file.

Posted On: 2009-12-08 . View Related Posts . . View 2 Replies .

Usb Port Error - This Device Cannot Start - Code 10

Each time i plug in a device into a usb port(memory stick, ipod etc) i get an error message "this device cannot start.code 10. " I've tried downloading drivers but it says they are up to date. This has only happened in the past week and before that they were working fine.

Posted On: 2010-04-24 . View Related Posts . . View 2 Replies .

Cd Drive Error Code 19 - Cannot Start Hardware Device

After installing windows 7, this error appears with my cd drive, windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My laptop ran windows xp, and i used the windows 7 compatibility software to see if windows 7 can work with my laptop and it was approved.

Long story short after i installed windows 7 i installed all the drivers the sony esupport told me to, however my cd drive isn't working. When i go to the device manager and click on its properties i get the following error message "windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)". I tried uninstalling the driver and restarting and that didn't fix the problem either.


Posted On: 2010-02-06 . View Related Posts . . View 2 Replies .

Error Code 43 - Windows Has Stopped Device, It Has Reported Problems

Windows 7 does not recognize my asrock p4v88+ motherboards usb ports since installation of windows 7. Device manager shows this error code: windows has stopped this device because it has reported problems. (Code 43). I have installed latest chipset drivers and latest bios still no joy.

Posted On: 2009-12-08 . View Related Posts . . View 4 Replies .

Nikon D60 Error - Windows Has Stopped This Device - (code 43)

After connecting my nikon d60 via usb after a minute or so i get this error "windows has stopped this device because it has reported problems. (Code 43)". I have been using windows 7 for a while now and this error has only just begun. It often appears after importing photos to picasa.

Posted On: 2009-11-22 . View Related Posts . . View 2 Replies .

Usb Flash Drive Error: This Device Cannot Start (code 10)

This device cannot start. (Code 10). This is what i get on my geek squad 8 gb usb flash drive when i plug it in and when i go to device manager it shows it under portable devices as wpd file system volume driver and it used to show as a drive and i used to use it as a ready boost also and neither are working now and i cant update the drivers or get it to recognize it when i uninstall it or uninstall it nothing works and i dont no what to do or where to turn pleas help!

Posted On: 2010-02-26 . View Related Posts . . View 2 Replies .

Load Driver - A Required Cd/dvd Drive Driver Is Missing

I tried to do fresh install of windows 7 ultimate 64 bit version (pls don't recommend 32 bit, as 64 bit support is the main reason for me to switch to win7) on my home pc and installer is requesting for additional driver. I've seen similar problems in other forum threads, however responses does not really help me.

My hw configuration is:
Msi p35 platinum + q6600 + 4 gb ram + few sata hdds + nvidia geforse 9800 gtx, i've downloaded all latest drivers from msi site. I even manage to extract drivers, which require installation (such as all inf drivers, etc). However, windows installer is rejecting all drivers (it allows to select driver but throwing "no new driver found" message after i press "next" button).

So, here is summary of my biggest frustration:
1. Why windows 7 installer rejects all latest drivers?
2. Why windows 7 upgrade advisor is saying that all devices on my computer are windows 7 compatible (on 64 bit report)
3. Why windows 7 installer does not mention device which requires new driver?
4. If microsoft is planning to run qa on its customers i'd like to get my fees!


Posted On: 2009-11-01 . View Related Posts . . View 6 Replies .

Error - You Need A Wia Driver To Use This Device

Xps m1530 webcam won't work, receive error "you need a wia driver to use this device. " In windows 7

*Original title - xps m1530 webcam issues*problem:webcams just dont work on this computer anymore. The internal webcam stopped working, then i tried an external, and it didnt work, and i just bought a new external webcam which is windows 7 compatible and still no luck.

Background: bought my xps m1530 with vista 32-bit almost 2 years ago and upgraded to windows 7 64-bit when it came out. My internal webcam has not worked since. When i look at the hardware details, it says everything is working ok, both for internal and external webcams, but the video just doesn't show. The microphone on the laptop works, and i think the microphone for the external webcam works so i think the products do work. I feel its a driver issue, but i have installed so many drivers and applications and nothing seems to work.

I don't see anyone else with this problem online. When i go to the control panel and look at my hardware, and double click on the internal webcam, i get this message ""you need a wia driver to use this device. Please install it from the installation cd or manufacturer's website and try again"". I just went to dell's website and reinstalled some drivers and some more, but still have the issue. Any idea what this wia driver is? I googled it, but cant find anything specific to my product.

I have contacted both dell and hp (external webcam), and dell points their fingers and hp and also says warranty void for changing os, and hp says its computers fault (and i do think it is computers fault), but none of them are really helping me solve the problem. Can anyone help me? Is there a way to run a diagnostic on the computer ?


Posted On: 2010-06-10 . View Related Posts . . View 2 Replies .

Error - You Need Wia Driver To Use Device

Error "you need a wia driver to use this device" when trying to open canon dr5010c. Get a windows image acquisition driver to work with a canon dr5010c attached by usb port i have already downloaded twain & sisi drivers and still get error message "you need a wia driver to use this device" when i try to open canon dr5010c from the printers & devices. I am searching for a driver interface fix.

Posted On: 2010-07-20 . View Related Posts . . View 4 Replies .

Media Player Error - Your Device Is Using An Outdated Driver

Windows media player sound driver problem:your device is using an outdated driver that is no longer supported by windows media player. I have windows 7, office 2010. Audio realtek semiconductor corp. Driver date 5/23/2009 driver version 6. 0. 1. 5859

Posted On: 2010-06-19 . View Related Posts . . View 3 Replies .

Error - Mtp Usb Device Has A Driver Problem

Receive error "mtp usb device has a driver problem" with new camera. Can someone please help me or do i need to get a new camera? Keep getting mtp usb device has a driver problem. How do i fix this or can i fix this?

Posted On: 2010-06-05 . View Related Posts . . View 3 Replies .

Error - Your Device Is Using Outdated Driver That Is No Longer Supported

Whenever i open windows media player, an error which says "your device is using an outdated driver that is no longer supported by windows media player. " Comes up. Can somebody help me solve this problem?

Posted On: 2010-07-07 . View Related Posts . . View 2 Replies .

Error - Device Driver Software Was Not Successfully Installed

Error device driver software was not successfully installed. This device cannot start (code 10) for cddvd drive. I am running windows 7 on a hp pavilion a1600n and sometime over the last month the dvd/cd drive stopped recognizing dvd and cds. It is opening and closing and spinning the disk when i put them in the drive, just not recognizing anything beyond that.

The device status reads this device cannot start (code10). From what i could find online code 10 was a hardware general purpose error. I have tried switching out for another dvd/cd drive and even switched out the cable inside to see if that was the error, it was not.

When i plugged the second dvd/cd drive in it tried to locate the drivers online and and informed me that device driver software was not successfully installed. I have been trying to find some sort of solution online to no avail.


Posted On: 2010-06-29 . View Related Posts . . View 6 Replies .

Device Driver For Hard Drive Upgrade Error On Hp S3620f

Trying to upgrade from windows vista 64bit to windows 7  64bit getting error need an update device driver for my hard drive, spent almost two hours with tech support case 1117693442 and the said go back to mfg for driver update. Model hp s3620f  and i have latest driver segate hd.

Posted On: 2009-11-21 . View Related Posts . . View 2 Replies .

Media Player Error Message - Your Device Is Using Outdated Driver

Windows media player error message: your device is using an outdated driver. That is no longer supported by windows media player. Checked web help: windows media error: you have encountered an error message while using windows media player. Additional information is not currently available for this error. Has any one encountered this problem and an answer? 

Posted On: 2009-12-18 . View Related Posts . . View 6 Replies .

Error - A Required Cd/dvd Drive Device Driver Is Missing

Windows 7 upgrade ultimate 64bit from windows vista home premium 64bit - error with "a required cd/dvd drive device driver is missing. I can see many posts for this problem, but the different solutions all confuse me. I am not a pc techie. I was trying to run windows 7 64bit ultimate upgrade from windows vista 64bit home premium on my pc. Before i ran windows 7 upgrade using the 64bit disk i bought from a retailer in sheffield england, i checked on the microsoft website and downloaded windows upgrade advisor.

This reported a number of minor issues, which i dealt with. It did not report any issue with my motherboard or cd/dvd device. I also downloaded easy transfer, but as i had recently rebuilt my pc i did not have many files to copy over so i have not yet used it. I have now rolled back the install, after getting very frustrated trying to obtain the "driver"some of the postings on the web suggest:buying an external usb cd/dvd device. I might do this and try again getting an update for ite it8211 ata/atapi controller driver - whatever that means usb install option involving ripping the disk into a iso image and then making a bootable usb stick.

Why on earth do i need to do this? Surely using a usb external dvd/cd device and putting into that the windows 7 upgrade disk will do the same job?More important what is an iso image? How do i create it? Why should i have to do this?This software has cost me gbp180. 00 when i bought it from currys retail store sheffield uk w/c jun 21st 2010, and i cannot get it to work. It is not at all satisfactory! I deliberately waited till now before buying to make sure a all the bugs were ironed out!

Obviously they are not!My pc was bought new from mesh in may 2009 and the build detail is:mesh desktop pc model xgs pii 955amd phenom ii x4 955 black quad core processor am3 3. 20ghz, 8mb cache ddr2/3asus m4a78-e mainboard amd 790gx hybrid crossfirex - am2+ phenom ii, ddr2- atx8192mb 800mhz dual channel ddr2 sdram2 x 750gb serial ata2 hard drive with 3mb buffer (1. 5tb) raid 0 configuration (stripe)samsung 22x dual layer dvd writer super format +r/-r/rw/ram this shows in device hardware as tsstcorp cddvdw sh-s223b scsi cdrom device.

The driver is located in c:windowssystem32driverscdrom.sys1gb ati hd4890 graphics accelerator hd 3300 gpu - hybrid crossfire xpcie gigabit lan controller featuring ai net 2 - asus m4a78 proi will also try to call microsoft support on 0844 800 2400 using access code 1233 when prompted. However, i wonder if anyone else who has had the same problem with a similar machine can advise how they sorted out the issue.


Posted On: 2010-06-25 . View Related Posts . . View 5 Replies .