Advertisements:




Laser Mouse 6000 Problem


I am running windows 7 ultimate 64 bit and have been having my laser mouse 6000 freezing temporarily and randomly. I have tried a new bluetrack explorer mouse and the same thing happens. If i change to hard wired usb mouse it works fine but i prefer the bluetooth with which i am very used to using.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Bsod With Microsoft Wireless Mouse 6000

Microsoft wireless mouse 6000 v2. 0 and keyboard 6000 v3. 0. Every time i start up my windows 7 desktop from shutdown or sleep, about 10 minutes in i get the bsod. It usually happens right about when my wireless keyboard and mouse starts lagging. This also happens when i change usb ports for the wireless transceiver.

After a restart, everything works fine. I did troubleshoot on devices and printers and i also did update drivers. Yet the problem still persists. This is a new windows 7 desktop. The wireless keyboard, mouse, transceiver worked fine with my vista laptop. I am getting concerned and frustrated at this problem. I have attached a photo of the bsod at this link .


Posted On: 2010-01-23 . View Related Posts . . View 3 Replies .

Microsoft Wireless Mobile Mouse 6000 Driver Problem

My microsoft wireless mobile mouse 6000 gives me a unknown device error in the device manager. When i first connected the mouse i got a message "the device driver was not installed successfully unknown device". The mouse works fine on another computer.

Posted On: 2009-12-14 . View Related Posts . . View 4 Replies .

Laser Mouse 8000 Will Not Charge

I usually carry my laser mouse 8000 around with my notebook since i'm not a big fan of touchpads. I use it until the battery runs out, then i put it back on the charger. Been doing this for months. About a week ago, i pulled it off the charger after letting it sit overnight and when i tried to use it i couldn't get it to work.

I tried a fresh non rechargeable battery and it worked fine, so i tried just recharging it again to no avail. I tried lightly abrading the contacts with some fine grit sandpaper and cleaning with some rubbing alcohol and q tip, but i still cannot get it to charge. Any ideas?


Posted On: 2009-10-20 . View Related Posts . . View 2 Replies .

Microsoft Wireless Laser Mouse 8000 Issue

I have a microsoft wireless laser mouse 8000. It was made in march 2007, i got it in around 2008 and have been using it every day. Recently it doesn't work much anymore. It will just stop working and putting in a new battery sometimes works, sometimes doesn't. Most of the time, even after a new battery has been inserted. I will turn it on, it either will do nothing, or glow green for a few sometimes work sometimes not.

Is it dead and should i have to get a new one? I recently picked up a pack of 8 rechargeable batteries, with a charger.


Posted On: 2010-03-02 . View Related Posts . . View 5 Replies .

Ms Wireless Keyboard / Laser Mouse 5000 Intermittent Problem

I have an intermittent problem with my ms wireless keyboard and laser mouse 5000. Windows is not recognizing the receiver in "device manager" and will not allow any updates due to compatibility issues. My ms wireless has worked then when i re-boot, it will not work. I cannot find anything consistent about the problem so i can't troubleshoot the issue.

The only consistent thing is that when the device manager is reading a failure on the receiver, i can change ports and it doesn't change anything. I tried removing the drivers, and installing new drivers but nothing seems to help. What do i do to get win 7 device manager to recognize my wireless keyboard and mouse receiver?


Posted On: 2010-02-19 . View Related Posts . . View 2 Replies .

Bsod With Microsoft Wireless Keyboard 6000

Bsod with microsoft wireless keyboard 6000 v 3. 0/mouse 6000 v2. 0.

Posted On: 2010-01-12 . View Related Posts . . View 8 Replies .

Programs Sewing Machine Brother 6000

Do you think its possible for a sewing machine to get a software problem? Obviously if its ran by software it could get a software problem. Brother 6000 isn't mainstream? Who would even bother except a rouge phd to invent the demise of sewing machine. Personal very personal very very personal. I fell in love with the quilt sewing embroidery machine the first time i saw the brother 4500 beautiful , computer operated, perfect. Then i got scared what if it had a computer problem and its difficult to get parts and service for a 2003 hp compac? Not many people own or even know what a brother 6000 is, or know how to fix it.

I am looking for a quilt embroidery machine if you have any experience and most have some computer operation to them. My sewing machine is not computer operated its just a regular singer. Then again i don't have to worry about a sewing machine virus and the issues of fixing it and worrying about it. The brother 6000 is about 10 thousand dollars , lota money for a sewing machine. In fact way to much for me. I just wonder if computer operated sewing machines get viruses? What is a good yet inexpensive one?


Posted On: 2009-12-24 . View Related Posts . . View 2 Replies .

Ie8 Installed Problem With Ms 6000 Wireless Keyboard

Running xp 5. 1. 2600 sp 3. Installing ie 8 caused two strange events. The slide show function for screen saver would not deploy. It would work with the preview function but not the way it is supposed to work. I was also using the ms 6000 wireless keyboard.

After installing ie8, the screen saver function started to work and my ms 6000 wireless keyboard receiver went dead (no green light). Changed batteries in keyboard but no luck. Don't know what ie 8 did but half of it was bad.


Posted On: 2009-06-11 . View Related Posts . . View 2 Replies .

Dell Printer 1500 Laser

Dell will not update the drivers for my printer (1500p laser) - it's in perfectly working condition, so i would like to keep it. I have a pc running xp (on a shared network) so i'm wondering. Is there a way to create a shared folder on the xp machine and when i add files to the share from the win7 (x64 hp) pc, the xp treats the folder as a print que, therefore, i can still print from my primary (win7) to the 1500 laser?

Posted On: 2010-04-24 . View Related Posts . . View 4 Replies .

Oki Laser Printer Offline Error

I'm using windows 7 64bit edition and an oki c5150n laser printer and have downloaded the latest drivers from the website. It always says the printer is offline, and when i uncheck the "use printer offline" mode, anytime i try and print it gives an error, which troubleshoot "fixes" by turning the printer to offline mode and the file i sent to print still does nothing. I have checked the cords, rebooted the printer and computer, as well as using "remove device". Any ideas would be appreciated

Posted On: 2010-06-16 . View Related Posts . . View 4 Replies .

Hp Laser Jet 5p Printer Problem In Win 7

I've spent about 5-6 hours on this, and am pulling my hair out.

I've got a new hp computer w/ w7 home premium 64 bit. And i'm connecting my old laserjet 5p via a parrallel line from the printer, to a male, 25 pin (db25), that is plugged into a female db25 parallel cable that has a usb on the other end. Usb is connected to port on the new computer. The device area has it listed as only a "unspecified" unknown device.

I started with w7's canned programs adding a printer, setting up devices, downloading drivers. Driver updates. When the test print did nothing, then i went onto trouble shooting. When that went nowhere.

Then i went to hp, looked through many blogs/community help sites, and eventually used their tech support for both the new computer area (had me re-do the canned parts, download drivers via devices area, again, and when that failed (again) they suggested i call their "commercial laserjet" technician who said. "It's no longer supported. " And if the driver you downloaded doesn't work, it's ms's problem, not ours.contact them. " Which (eventually) leads me here.

I went thru the ms canned fix-its, and downloaded manually from hp's site (as opposed to the devices automatic download/updates), only to get a message. "Windows encountered a problem installing the driver. The error occurred during installation, because it is either not digitally signed or not signed.contact your hardware vendor (that would be hp, who doesn't support it)

So you get the picture. I working a pretzel here. Ms says it's hp, hp says it's ms. And all i want is to use my printer that worked two weeks ago on my old compaq

So, there was one hp clue that i found that seems like i might be closer to the problem a .doc that said, look for a ieee 1284 interface in your devices, and make sure there are no error codes. So, i found ieee 1394's or something like that (i'm not there now). But no ieee 1284's. Let alone error codes

So, i got back in touch with hp service, and how do i get ieee 1284 there instead. They said they don't know, and it's a ms problem.

So, with a little more digging, i found in "device manager" that i could add a ieee 1284 printer. But the drag down list did not have the 5p. So close, but so far, and nothing to update, like in the other device area.

So, i'm getting pretty frustrated that an hp printer can't work on an hp computer, even after downloading a driver from hp. Is this ieeee 1284 something you can set up?

Any clues on how to fix this would be very, very much appreciated

Thanks, drjames


Posted On: 2010-02-03 . View Related Posts . . View 14 Replies .

Canon Imagepass D660 Laser Printer - Cannot Find Driver

I'm looking for creative ideas on my friend's current conundrum. He got a new $400 compaq pc from best buy loaded w/ windows 7 64-bit. All went swimmingly well until we got to his canon imagepass d660 laser printer. No 64-bit driver. Canon will never create a 64-bit driver for it. He loves this printer and does not want to abandon it. We can print to the printer from a laptop we converted from 32-bit vista to 32-bit 7. I'd share the printer from the laptop to the desktop but i believe that would still require a 64-bit driver.

I see only two options, unless someone can suggest another:

1. Repurchase win 7 at retail; wipe & reload the pc with 32-bit. Not sure if 32-bit drivers are available for the internal hardware. No cd came with the pc, either.

2. Return the pc and locate another pc with 32-bit loaded - probably via dell or hp online.
If there is any way to circumvent a problem where there is no 64-bit support for a printer but another networked pc can print via 32-bit, i'd love to know about it.


Posted On: 2010-05-15 . View Related Posts . . View 2 Replies .

Canon Lbp 810 Laser Printer Driver Installation Problem

Windows 7 os wont install driver for canon lbp810 laser printer using installation disk for lbp810 printer. I have attempted to run the install disk for the printer as well as using auto update function in windows 7. It seems the list of printers windows lists does not include the lbp810 model. I have also downloaded the driver from the net which fails as well. There seems to be a compatibility issue with the older drivers used to run printers. Can anyone please help me with this?

Posted On: 2010-05-29 . View Related Posts . . View 6 Replies .

Mouse Scrolling Stuck With Wireless Mouse

I have a labtec wireless optical mouse for notebooks. It causes scrolling to involuntarily occur with sliders and drop-down boxes as long as the mouse is hovering over the item.
For example:

1) when i signed up to these forums and had to choose a country the mouse scrolled through the list right to the bottom without my intervention (other than selecting the drop-down box). Almost all drop down boxes tend to be effected regardless of what program it is in.

2) if i try to adjust the volume in the system tray the mouse raises the sound even while i am trying to lower it.

3) in certain programs the mouse will scroll through the page automatically. It does not do this with all programs. Chrome, ie, firefox, acrobat, notepad and many others are not affected.

4) i did not have these issues with xp at all, but i did when i used ubuntu (mouse would cycle through tabs and always cycle to the first box on the ubuntu taskbar. I had to alt-tab to change windows. )
 
5) when i first installed chrome the mouse would automatically scroll through the tabs to the first one even if all i did was hover over the tabs. I could could only properly select another tab if i clicked it and then moved the mouse from the tabs quickly. I did this which fixed the issue: "the document suggests changing some registry values to disable this high resolution behavior.


Posted On: 2009-11-20 . View Related Posts . . View 5 Replies .

Canon Mf4370dn Laser Printer Keeps Showing Up As "offline"

I just bought a new canon mf4370dn laser printer and followed the instructions that came with the printer for setting it up to print via the network. The printer printed the test page, but keeps showing up as "offline" and i can't print anything at all. I have a toshiba laptop that has windows 7 on it (not sure if that's relevant).

I have very little knowledge of how networks work or how to set such things up properly, but i followed the instructions in the 'starter guide' that came with the printer. The printer is plugged in and turned on, however keeps showing up as "offline" when i look at the printer queue.


Posted On: 2010-03-31 . View Related Posts . . View 2 Replies .

Install Canon Mp390 & Canon Lbp2900 Laser Printer

How do i install my multi function device canon mp390 & canon lbp2900 laser printer on my windows 7 64-bits.

Posted On: 2010-01-28 . View Related Posts . . View 4 Replies .

5 Button Mouse Acts As 2 Button Mouse

I have been using the microsoft wireless laser 8000 mouse (4 buttons & scroll wheel) without any issues under windows xp and windows server 2008 r2. Unfortunately, i am not able to get the extra functions (left, right buttons and scroll wheel) to react at all. I have the latest intellipoint 7. 0 64-bit installed. I have uninstall and reinstalled the software, uninstalled the software and did a "clean" boot to install the software, without success. How can i fix this problem? 

Posted On: 2010-06-02 . View Related Posts . . View 4 Replies .

Mouse Is Jumpy

I am using windows 7 premium with ms office home. Recently, i notice my mouse is jumpy (doesn't keep up) and the notification sounds warble (not smooth and clear sound, but broken up). A friend has suggested that there may be a compatibility problem with programs i have loaded. If that is the case i can not identify what programs are having incompatibility problems - assuming this is the problem in the first place?

Posted On: 2009-11-04 . View Related Posts . . View 2 Replies .

Mouse Sound Does Not Go Away

I just purchased a new computer with windows 7 and i used the easy transfer to get my files from the old computer. Once all files were transferred a beep sound started everytime i click the mouse or the system start a new task (i.e. Every click with explorer or any software application). I looked everywhere and unclick computer beep and key sounds but nothing the sound does not go away. It beeps everytime and i am going crazy, can anybody help, i consider myself an advanced computer user but i can not find the solution. I just need the sound to go away.

Posted On: 2009-12-31 . View Related Posts . . View 2 Replies .

Wireless Mouse

I am having trouble with my recently purchased 'targus' wireless mouse. It was fine till now, but all of a sudden i heard a beep from my laptop (similar one which comes when you plug/unplug something to a usb drive) and it just doesn't work anymore! No lights on the usb receiver which comes along with the mouse anymore!I remember the following things:1. I had installed updates from windows yesterday (but after that as well for couple of hours today it was fine)2. I got an alert for battery level and soon after i plugged in the power source i got the beep and mouse went dead in some moments. These may be irrelevant, but could anyone please help?

Posted On: 2010-08-10 . View Related Posts . . View 2 Replies .

Erratic Mouse

Win 7 ultimate x64, microsoft natural wireless mouse and keyboard combo. I have great difficulty using the mouse. Had the same problem with a great logitech mouse which i thought was failing and discarded. To bad, it felt better then this one. Latest driver is installed. Problem slowly started manifesting in last month or so. No solutions in forums, other than to go with a ps2 mouse: which i would if i hadn't just spent $120 on this, anf if they still made a ps2 mouse that fit my hand!Do i have to re-install win 7 just like all the other windows releases over many years?

Posted On: 2010-08-07 . View Related Posts . . View 5 Replies .

Mouse Scrolling

I recently installed a wireless keyboard and mouse. ( Microsoft natural wireless ergonomic keyboard 7000  and mouse, microsoft natural wireless laser mouse 7000) so, i installed the disk and the mouse has functions to zoom in go back to pages and vertical scrolling. So, it works good.

Then when i want to use my old mouse ( only can click, scroll and right click ) to play computer games as the wireless mouse does not fits me (counter strike cz), i couldn't scroll down to select weapons even when i use internet and trying to scroll down, it doesn't work.

But the wireless mouse is useful for surfing the internet so i do not wish to delete the program that allows the mouse to function. But drags me down during gaming.


Posted On: 2009-06-15 . View Related Posts . . View 6 Replies .

Mouse Issues

This is a weird issue i am having. When i went to install, once i got to the install screen, the bar at the top that is highlighted flashes like its going into background and coming back out. Then it basically becomes unresponsive. I figured out it was the mouse. I used another mouse i had, and had the same issue. I disabled legacy support in the bios and got it to respond once but only by plugging it into the usb ports on the front of the computer, then it did the same thing once i got to the next window. I thought maybe it was a driver problem, so i just installed windows  using the keyboard.

Everything loaded fine. Once i loaded up the chipset, i installed the drivers for the mouse (all using the keyboard). Plugged in the mouse, and these are the issues:can move the mouse but clicking on any program icon is non responsive right click works on desktop keyboard or mouse will not work with any functions including the start button. Once i open the recycle bin, the window goes gray and becomes unresponsive. Ran memory test everything was fine this issue is weird.


Posted On: 2010-04-15 . View Related Posts . . View 2 Replies .

Smooth Mouse

On this one video on youtube this one guy made his mouse totally smooth on windows xp by right clicking on my computer, going to mice and other pointing devices, clicking on the mouse he was using, going to advanced, and then setting the sample rate to 200. Well when i try this on vista it doesn't show advanced settings under the mouse i'm using (im using a logitech g5 laser mouse). So if anybody knows how to do this on vista please tell me how.

Posted On: 2010-05-09 . View Related Posts . . View 2 Replies .

Mouse Clicks On Its Own

This is the third laptop i have purchased in the last month. I originally thought it was a problem with the computer. But after now just opening my third brand new computer today, it appears it is just a glitch with windows 7 since it has occured on all computers. When hovering over a link (online or off) with my cursor/mouse, the computer will click on its own sometimes; thus taking me to another page that i didn't necessarily want to go to. Not always, but just enough to be annoying. Can anyone help?

Posted On: 2010-01-17 . View Related Posts . . View 5 Replies .

Mouse Stuttering

I'm experiencing horrible mouse stuttering whenever my old raid-0 is in heavy use. Same happens with keyboard - typing in stuff works but the characters appear at random intervals and in bursts. Disabling/enabling aero etc makes really no difference. Other hdds work fine without the stutter (including my external usb hdd). I'm not using a wireless mouse, my os is located on a new ssd drive. Effects occur also when the system isn't overclocked. Any help is much appreciated, this is really driving me insane.

Posted On: 2010-06-28 . View Related Posts . . View 6 Replies .

Mouse Acceleration

I don't know what is different but the way my mouse performs windows 7 bothers me and i'm thinking it is due to the mouse acceleration curves, thresholds, sensitivity, etc. A similar question regarding disabling mouse acceleration was asked a few weeks ago (link to post ) and the answer or "fix" was to adjust the mouse key settings under the control panel>>ease of access (accessibility options in xp)

My question is what do the mouse key settings (a feature to control the mouse cursor with directional keys on your keyboard) have to do with the way the actual mouse performs? I thought the mouse performance was controlled solely by the registry settings mousesensitivity , mousespeed , mousethreshold1 , mousethreshold2 , smoothmousexcurve , and smoothmouseycurve.could someone clear up my confusion?


Posted On: 2010-01-05 . View Related Posts . . View 2 Replies .

Mouse Very Jerky

Windows 7 64bit, all windows updates applied as well as proper hardware drivers. Hardware is an amd phenom ii x4 955 cpu - quad core at 3. 2ghz.amd890gx chipset, 4gig of ddr3 memory. Ati radeon 4800 pcie video card. Mouse is a wireless laser mouse 6000. Fresh batteries. Unobstructed receiver. When running any kind of program installer, the mouse is very "jerky" on the screen. Checking the task manager, i see that one core is running very high - 95%, but the other three cores are near idle. Memory usage never changes - 1. 9gig used. Looking at the processes tab, the highest cpu usage i see is 2% for task manager itself. With three idle cores, why would the mouse be jerky?

Posted On: 2010-08-19 . View Related Posts . . View 3 Replies .

Which Mouse To Buy?

I'm a little bit desperate because i cannot find a single mouse from logitech or microsoft that suits my needs. Shop salesman i have consulted in various local shops have absolutely no knowledge (they read what's at the back of the casing and if i ask a question they have no idea).

Use cases: gaming development with visual studio

Must have:- ergonomic (right hand) cordless laser 4 way scrolling no batteries to replace (i do not want to replace batteries, it needs to have some cradle (is this the right word?) To put it in so it charges. Currently i use a logitech mx5000 mouse, however it doesn't fit into the cradle in a way that you can just put it in there; you need to put it in exactly so it starts charging. Often i have to spend several minutes for it.

Color scheme should fit a logitech dinovo edge, samsung syncmaster 226bw, xbox elite (black). (Basically black and silver/grey in a more business style). Price less than 200 euro

Should have:- dust resistant (no big openings at the top) would be nice. Additional keys led to show the remaining charge sensitivity control bluetooth. If you know any mouse that fits in here please help me.


Posted On: 2010-05-15 . View Related Posts . . View 2 Replies .