Advertisements:




Error Code 52 - Usb Ports Not Working


I have recently purchased a new laptop with windows 7 and had no initial problems connecting usb devices (mouse, hard drive, camera etc. ) To the ports. Since installing a number of windows updates none of my usb ports will now recognize any hardware that is connected to them.

The error code is quoted as follows "windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52".

I have been into device manager and notice that each usb icon has a yellow exclamation mark icon next to it. I have uninstalled each usb port and scanned for hardware changes which has no positive affect. I have also tried to 'update driver software' in device manager and again this tells me that the driver is up-to-date for each usb port.


View Full Post With 4 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Usb Ports Not Working - Error Code 43

Im having a problem with all of my usb ports not functioning properly. It all started around christmas and i wish i knew what i did to make this happen because prior to that all of the ports worked fine. Anytime i plug a usb device in i get a message saying that the device is not recognized. In the device manager under the usb section i get an "unknown device" with or without something plugged in. Ive tried quite a few different drivers and read 100's of forum posts trying to help solve the problem. No one seems to have an answer and lots of people seem to be having the same problem any help would be appreciated.

System specs:

Evga nforce 750i sli ftw - board
Intel core2quad 9450 - chip
4gb ocz ram
Nvidia geforce 9800 gtx - video


Posted On: 2010-01-28 . View Related Posts . . View 3 Replies .

Plugging Usb Keyboard & Mouse Into Different Usb Ports

I have a usb keyboard and mouse. Recently, i had to relocate my computer, so the keyboard and mouse were unplugged. My question is: if i plug the keyboard and mouse back, but not into the original usb ports, will this cause windows 7 to create a new hardware profile, or any other registry changes as a result?

Posted On: 2010-07-20 . View Related Posts . . View 2 Replies .

Problems With Usb Ports

Basically i'm having problems with the usb ports. The ones on the back of the motherboard and the connectors inside on the motherboard. Some usb devices will work great, others won't work at all.

Example: i have 2 sandisk cruzer flash drives. If i plug the 4gb in windows picks it up right away and asks what i would like to do (open folder etc. ) However, when i plug the 2gb flash drive in windows does nothing. The cruzer 2gb shows up in "devices & printers" but i can't do anything with it. I can do this with every usb port on the motherboard. Same results. The 2gb flash drive works. I've tried it on another computer.

I noticed this when i tried inserting a memory card into my card reader. "Devices & printers" knows that there is a pro-gear xm-4u card reader attached, but won't do anything with it. I borrowed 2 other card readers from work and i get the same end result. Windows shows them in "devices & printers" but i can't do anything with them.

I'm using a fresh copy of windows 7 64bit. Installed it about 8 days ago. I upgraded the bios right after windows was installed. However i assumed the usb port wouldn't be a problem so i didn't checked them before upgrading the bios.


Posted On: 2010-03-01 . View Related Posts . . View 4 Replies .

Usb Ports Problem

Im using win 7 32-bit and a asus p4vp-mx mobo

1. I plugged in my pen-drive (tried several of them), computer shows "this device can perform faster" and ask me to plug into usb 2. 0. As far as i know, p4vp-mx usb ports are usb 2. 0

2. When i transfer file into it, it stops at approx 1/4 of the process. After that, it says removable drive cannot be located even though i replugged it

3. Replug, says need to reformat.
4. Tried to reformat, failed.

5. Need to plug into other pc to reformat it before can be use again. The cycle goes on and on.
 
Is this a virus prob or win7 prob? Edit: forgot to mention that my last windows update was on daylight savings time which was release somewhere in feb 2008 if im not mistaken. Now everytime i restart, my computer resets to 1/1/2002.


Posted On: 2010-05-02 . View Related Posts . . View 4 Replies .

Usb Ports Will Not Work

This is a new build. Asus p6t mb, 12gig mem, win 7. All works fantastic except cannot get usb ports to recognize any input. Have logitec 15 keyboard, flash drives, card reader, jam lab, usb hub and others. Device manager shows that all 8 ports are working, all drivers up to date. I have tried the usual methods to fix. Click off the power management box (win 7), unplugged power source few minutes.

Delete drivers and reinstall. Nothing, now here is the weird thing, i can plug in usb devices in all ports and nothing is recognized. Have downloaded all win 7 drivers from the vendors, these devices light up, they get power, but will not work.


Posted On: 2010-01-02 . View Related Posts . . View 4 Replies .

Issue With Usb Ports

Like many other users a i too am having an issue with usb ports in a brand new computer build and clean windows 7 install.

I have tried many of the "fixes" on this board -
 Unplugging the computer
 Uninstalling the usb drivers
 Installing the latest chipset drivers
 Uninstalling ghost devices

Nothing seems to work. Anyway, i built the pc, installed windows, installed the latest intel chip drivers (ver 9. 1. 1. 1020), installed the latest f3 bios, uninstalled the latest intel driver and installed what came on the cd with the mobo and still cannot get the front usb or the card-reader's usb port to work with usb sticks. I even reverted back to ver 9. 1. 1. 1013) chipset drivers with no luck.

I even changed which internal port i had the card reader connected to. The funny thing is the card reader is working fine in both of the internal ports. I can read/write sd and compact flash cards just fine. However the usb port on the card will not work with a usb memory stick, external hdd, or usb flash card reader.

Neither will the front side usb ports on the case. Does anyone know if this is an os issue? A mobo issue, or something else. I am tired of installing an uninstalling things.

I just purchased the following hardware/software:

Gigabyte ga-p55-ud4p (rev 1. 0) mobo
Intel core i7 860 2. 8 ghz
Rosewill case with front side usb/firewire
Ocz stealthxstream 700w power supply
Powercolor hd readon 4350 video card (not nvidia)
Nippon labs internal card reader
Windows 7 professional 64bit.


Posted On: 2009-11-04 . View Related Posts . . View 12 Replies .

Hp Tx2000 Usb Ports Issues

The usb ports seem to send power to an attached device (e.g. A blackberry) for an instant then go dead. The usb hubs show up in device manager and uninstalling / reinstalling them doesn't make them work. The driver for the screen digitizer (tablet) is wacom and installs properly but when accessing tablet properties control panel a dialog "supported tablet not found on the system": the digitizer does not show on device manager either.

Bluetooth shows up in device manager under network adapters, but not in control panel webcam doesn't show up in device manager. I heard about using the acer-chicony driver and no help for me there. With all these issues i wonder if this is a hardware problem - but with details like the usb port registering for an instant then goign dead i hope theres a driver / software / config solution.


Posted On: 2009-10-03 . View Related Posts . . View 2 Replies .

Switching Usb Ports During Backup

I am running a backup and using a usb port in the back of my pc with a hub. After 7 hours i am only 58% done. Can i just unplug the usb cable to the external hard drive and plug into a 2. 0 port in the front of my machine during backup? Also, this is not my first backup and i would like to only backup new or altered files. Is this possible?

Posted On: 2010-02-13 . View Related Posts . . View 3 Replies .

Usb Ports Stopped Working

This error happens suddenly. All the usb devices and the ports are working, they are activated on the bios, but they don't work when the windows starts. In the device manager it shows an exclamation on usb controllers an says about code 10.

If i remove all the devices and then "check for new hardware", windows recognize all of them and everything works fine. But is just restart the pc and the error returns. I've already updated the bios from motherboard (updated it from usb, worked 100%), but when entering in windows. I've tried to look for some drivers, but didn't find nothing about drivers for my motherboard. Is a gigabyte ga-ma69vm-s2 (which is supported by win7) and i'm using windows 7 x64


Posted On: 2010-01-09 . View Related Posts . . View 3 Replies .

Usb Ports Disabled After Every Boot Up

I have been running windows 7 for a few days. Been quite happy with it. Suddenly, my usb stuff started failing. After several attempts to locate the culprit i found they had error messages in the device manager. I re-enabled the ports and presto. They all work again. Great, then i rebooted. All disabled again. I changed/unchecked the power saving mode after reading up about that and it is staying unchecked. But the ports are still disabling every time i reboot. Running a 2 year old hp pavilian. 64 bit win7 installed intel core 2 quad. 3 gig ram. 2 external dvd burners, usb keyboard, wireless mouse. Nothing special.

Posted On: 2010-01-25 . View Related Posts . . View 2 Replies .

Usb Ports Are Not Working In Front

I noticed yesterday that my computer was taking really long time to respond, and after restarting it my computer took 30 minutes to get to the desktop. So i reinstalled windows 7 thinking it would fix my problem. It didn't. It still was taking 30 minuets to load to the desk top, nut now my usb ports in the front won't recognize my flash drive, my digital camera, or my web cam. Every thing flash or kicks on when i plug them in, but my computer doesn't pick them up at all. My computer is really sick and i have no idea how to fix it. Any suggestions?

Posted On: 2010-03-20 . View Related Posts . . View 2 Replies .

Usb Ports Suddenly Stop Working

Well the problem is that all the usb ports of my computer alienware aurora (dell gaming edition computer) have stopped working in windows. Yesterday they were functioning normally, i didn't install anything or changed any configuration. Today i turned my pc on and the usb keyboard was recognized in my bios set up(i can use my keyboard only in the bios set up) and all the usb ports functioned as well while i'm in bios set up but when windows 7 starts the light in the keyboard goes off and it stop functioning as well as the usb mouse and any other ports so i can't type my password on the log in screen of windows.

I guess it is a software problem but since i cannot enter in windows i can't do anything to fix it(my pc doesn't have any ports for old keyboards and mouse).


Posted On: 2010-08-03 . View Related Posts . . View 4 Replies .

Front Usb Ports Overloading Flash Drives

My computer is an hp pavilion purchased this past christmas at best buy. About a month ago, after plugging my flash drive in to one of the usb ports and noticing that it didn't recognize that any device had been plugged into the system, i pulled the flash drive out with the intention of trying it over again. The flash drive was very hot to the touch, close to the point of being painfully so. I immediately tried plugging it into my laptop, with no success.

My wife then got her old flash drive and tried, just to see if it was a fluke, but the same problem occurred. The usb port ate her flash drive. It wasn't burning hot upon being removed, but the drive would no longer read when i plugged it into the laptop. It would recognize that a usb device had been inserted, but would be unable to discern what type of usb device it was and, as a result, fail to read it at all.

I have no idea whether the front usbs are shorted out or if this might be some kind of odd software issue. A friend of my wife seems to think the usb drivers need to be reloaded, but i still wonder if it isn't a short in the physical circuit. Has anyone ever heard of this happening? If so, what is the best solution? I've already contacted hp about it and they want me to mail them the tower for a complete system reload - back to factory conditions. I really want to avoid that with all the data i have on this computer, if at all possible.


Posted On: 2010-04-29 . View Related Posts . . View 4 Replies .

Usb Ports Don't Receive Power

When i boot my pc i can use my usb mouse and keyboard but when windows 7 loads up they stop working the power light stays on there but if i unplug them then pug they back in no power goes to them but works completely fine in bios its just as windows 7 loads they stop working help? The usb ports on my new pc don't seem to work.

Posted On: 2010-06-03 . View Related Posts . . View 2 Replies .

Error Code - 19 - Usb Stuck

I have a 8gb usb struck which work fine. After a windows reboot without safely remove the device. It cannot use any more.

Syndrome: when double click the drive letter (g:), pop up "please insert a disk into removable disk"
Disk management: no media on the disk device management: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

Tried: put into other windows xp, windows vista and has the same result installed some usb format tools such as hp's one uninstall the driver and detected with the same result. Does anyone has any idea to fix it?


Posted On: 2010-05-10 . View Related Posts . . View 6 Replies .

Usb Hub Code 43 Error

I'm getting a code 43 error for a hub . It's a wireless router. I'm able to use the wireless connection just fine. But since the router is right next to my windows 7 pc, it would be nice if i could use a direct wired connection to the router as a hub for my internet connection. I had a cisco wireless router and it seemed to stop working. So then i bought an incredibly cheap wifi router. Worked for a while. Then the direct connection to it stopped working too.

[How silly of me to think that the problem was with the cisco router. Bet when i fix this, that router as a hub works fine, too. ] I've collected the msinfo32. Nfo file and will post it on skydrive as soon as skydrive is operational again. Windows 7 on a new pc.


Posted On: 2010-04-10 . View Related Posts . . View 2 Replies .

Error Code 43 Usb Not Recognized

I have a toshiba satellite l305. Windows 7 was installed in oct 09. Everything has been working fine until today when a message "usb device not recognized" appeared along with a note of a error code 43. None of the ports appear to work. Previously they had been used for a mouse, my blackberry (including syncing with outlook) and a palm handheld. I have uninstalled all usb ports and restarted the computer but the same messages occur.

Posted On: 2010-02-18 . View Related Posts . . View 2 Replies .

Code 43 Error For Usb Device

Running windows 7 on a dell inspirion usb wire optical mouse has been working without difficulties for last three weeks since we purchased it. This morning device not working message appeared and the mouse stopped working.

The mouse works well on other systems (xp) as we checked to ensure it was not the mouse. Uninstalled all the usb drivers, and unplugged any usb devices, restarted and windows 7 which reinstalled usb drivers. The driver installation reports successful installation on controllers and root hub however indicates a device failed at the end.


Posted On: 2010-02-03 . View Related Posts . . View 3 Replies .

Error Code - 10 - Usb Device Do Not Autoplay

Autoplay won't run when i plug in a usb device. Device manager says cant start (code 10).

Posted On: 2010-07-09 . View Related Posts . . View 4 Replies .

Usb Port Error - This Device Cannot Start - Code 10

Each time i plug in a device into a usb port(memory stick, ipod etc) i get an error message "this device cannot start.code 10. " I've tried downloading drivers but it says they are up to date. This has only happened in the past week and before that they were working fine.

Posted On: 2010-04-24 . View Related Posts . . View 2 Replies .

Iphone Connection Via Usb Cable Does Not Function. Error Code 37

Iphone connection via usb cable does not function. Error code 37 - cannot initialize connection. Has sombody a solution? Thanks. See above statement. Iphone connection via usb cable. Error message code 37 - cannot initialize connection.

Posted On: 2010-07-27 . View Related Posts . . View 2 Replies .

Usb Flash Drive Error: This Device Cannot Start (code 10)

This device cannot start. (Code 10). This is what i get on my geek squad 8 gb usb flash drive when i plug it in and when i go to device manager it shows it under portable devices as wpd file system volume driver and it used to show as a drive and i used to use it as a ready boost also and neither are working now and i cant update the drivers or get it to recognize it when i uninstall it or uninstall it nothing works and i dont no what to do or where to turn pleas help!

Posted On: 2010-02-26 . View Related Posts . . View 2 Replies .

Usb Not Working Properly - Ports Randomly Stop Working

I ran the windows 7 upgrade advisor before upgrading on my gateway gt5678 and it did not mention any compatibility issues with my drivers. After upgrading i noticed my usb peripherals are not working properly. My external usb hard disk shuts down about 12% of the way into a windows backup. If i plug in my ipod, there is a good chance it won't be recognized.

Same thing happens with usb memory sticks. If i plug them in, they either work or they don't; it is inconsistent. When one device fails, none of the ports work until i reboot. This has been a pain, because i have several vms i use for development, and half of the time they fail to copy to my usb hard drive.

I opened up device manager and noticed the following for nvida nforce system management:
[Conflicting device list]
Input/output range 4900 - 493f used by:
Motherboard resources

I ran cpu-z to see what chipset my motherboard uses:
Chipset: geforce 7100
South-bridge: nforce 630i

I confirmed on gateway's support website that the chipset is geforce 7100. I went to nvidia's website to get the latest drivers and installed the ones for windows 7 geforce 7100. I am still having the same problems. I am not a hardware guy; i'm a software guy, so i think i am trying the wrong things. I haven't seen a conflicting i/o range in seven years.


Posted On: 2009-12-19 . View Related Posts . . View 4 Replies .

Device Malfunctioned Error Code - 43 - Usb Device Not Recognized

I purchased a new computer with windows 7.initially my ipod worked fine with this computer. It still charges the ipod but nothing else. In addition it will not work on my old computer.

1. I have completely uninstalled and reinstalled itunes.

2. I reset the device losing all of my music.

3. I have gone to device manager and the ipod shows up as unkown device. I have stopped the device driver and rebooted.

4. I have tried to have attached to my old computer update and i receive the exact same error and usb not recognized message.

5. Other devices work fine on the usb hub, in addition i have tried the other usb hub.

All of the above measures have failed. This all started when i was having problems updating my music to the ipod, and i chose the restore function on the summary page of the itunes software, with the device attached, and recognized. Since then nothing? Initially when the device was attached after the restore option was chosen, i got need to attach to a 2. 0 usb  high speed hub, error message? It is a 2. 0 usb high speed device. I have reviewed other questions in this forum, on apples forums, all with the same results, nothing.


Posted On: 2010-01-26 . View Related Posts . . View 2 Replies .

Usb Code 43 While Connecting To A Printer

Background: i have an existing printer (hp color laserjet 2600n) which works well with my old pc (windows xp)

I've just bought a new pc with windows 7 home premium (64-bit).

I have downloaded hp's newest driver for windows 7(64-bit) to my new pc.
"Hp_clj_2600-hb-pnp-win64-en"

I've connected the printer to the new pc via an usb cable

Problem:
Windows 7 will not install the new printerdriver.
The new pc repports:
Missing usb connection
"Unnown device"
"Windows has stopped this device because it has reported problems. (Code 43)"

This is already tried without solving the problem:
Restarting the pc
Restarting the printer
Device and printers/troubleshoot
Usb port controlled (it works fine with an usb memory stick)

Question:
How shall i get a usb connection to my printer ?


Posted On: 2010-02-14 . View Related Posts . . View 3 Replies .

Usb Headset - This Device Cannot Start - Code 10

I've just bought a usb headset today and tried to use it. I got a driver error message when first plugged in. The help system proved useless. After doing some searches on this forum i checked the device manager and found that the usb audio device properties indicates that 'this device cannot start. (Code 10)'. The forum entries suggests that many people are having similar problems.

Mine is a new windows 7 64 bit install on a new hard drive, but on an older pc hardware - asus a8n sli premium. Anyone got any suggestions as to resolving the problem. Note that a normal headset worked fine yesterday (but i broke it) plugged into the jack sockets but i wanted to use a usb headset so as to avoid having to keep going around the back of the pc to change to my 2. 1 speaker system.


Posted On: 2010-03-30 . View Related Posts . . View 2 Replies .

Usb Devices - This Device Cannot Start (code 10)

"usb devices keep getting in error in device manager after computer reboot"hi. Whenever i reboot my computer 4 of my 5 usb ports are in error in device manager with error "this device cannot start. (Code 10)". I uninstall them, restart and they begin to work. Until next restart.

I've checked if the driver version is the same for all five usb ports and it's confirmed (driver version 6. 1. 7600. 16385 from microsoft). What can i do to solve it? Computer is a dell precision 490. Device is an intel (r) 82801g (ich family) usb universal host controller.


Posted On: 2010-06-23 . View Related Posts . . View 7 Replies .

Com Ports Change Itself

I will try and keep this short. I was using the com 1 on my hp to key my radio. That computer died and i got a new one that has no com ports so i got a usb to serial adapter and it seemed to work but then on its own it will key the radio 3 or 4 times then switch com ports on me. I can reconfigure it and reboot and then it works (for a period of time) then does it again. Any ideas? 

Other devises are working fine on 2 other adapters but they have software that controls them where this one being used for push to talk on the radio (for digital communications) does not it is just relying on the voltage change from dtr dts and ground to key a small circuit that in turn keys the radio, when the voltage drops back to normal it unkeys the radio. Thanks for taking the time to read this, and feel free to email direct to email removed for privacy if you like.


Posted On: 2010-02-06 . View Related Posts . . View 2 Replies .

Ati I/o Usb 2.0 Ehci Device Cannot Start - Code 10

Since i updated my compaq sr1800nx from xp to windows 7 home premium, i cannot use my 2. 0 usb ports. I have talked to ms, activity 1219813, and hp with no success. I have looked for driver support from asus and ati with no success. In fact my mother board, model p5rc-la, does not exist on the asus web site.

Posted On: 2010-05-28 . View Related Posts . . View 2 Replies .