Advertisements:




Hp Photosmart Printer Prints Out Partial Not Complete


I'm trying to print labels from my quicken address book and i only get a partial. Usually a line or two is missing. I have changed the fonts and that doesn't help. My printer is hp photosmart c7280. My labels do not come out complete.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Printer Prints Incorrect Characters

Since windows 7 does not display all of the characters i need i used 'eudcedit' in order to create my own. This works great in windows. I have no problem using the characters i create in programs. The problem arises when i go to print a newly created character on my hp p3005 laserjet printer. The printer does not print the characters which i create. According to my hp pcl 5 manual i can create my own characters. Why doesn't the driver which accompanied windows 7 for my printer inform the printer of how to create a character which i have created?How can i solve this problem?Programmer for visual c+ 6. 0, and microsoft office including access

Posted On: 2010-04-15 . View Related Posts . . View 3 Replies .

Printer Only Prints Header And Footer Of The Document

When i try and print emails all that prints is the header and footer when i print a document all that prints is the title. I have downloaded all the drivers that seem to be required. The printer worked fine on xp on my old pc. Now with the dell laptop is it causing problems. Can anybody help?

Posted On: 2010-01-04 . View Related Posts . . View 7 Replies .

Printer Formatting Issue - Alldata Prints Incorrectly

I have new computer with windows 7, i use quick books v9, alldata, and alldata manage, also excel. The win 7 computer is the server to an xp based machine. Excel will not display correctly and will not print correctly. Alldata manage prints incorrectly. Looks like formatting issue because the print lines are cut in half horizontally.

Some parts of some print lines are misplaced vertically so that the horizontal line is choppy. Excel is same with displaying and printing. Quickbooks no printing problem. Also no problems printing from the xp machine using same programs and printer through the lan. I have attempted to download a new driver for the printer, but dont know how to check what version is installed.


Posted On: 2009-11-19 . View Related Posts . . View 2 Replies .

Hp Photosmart C4480 - Printer Not On Server

Have downloaded patch from hp but still stays "printer not on server". I upgraded my xp desktop to w7 which is connected to hp photosmart c4480 all in one and this computer prints ok. My laptop was upgraded from vista to w7 and is on the homegroup. I can access all the libraries no problem but when i try to print it states "printer not on server".

Have checked that printer is shared and have downloaded recent patch from hp, have deleted old drivers and installed latest w7 drivers from hp, have run printer troubleshoot and network troubleshoot which says everything is working ok? What am i missing ?


Posted On: 2010-05-08 . View Related Posts . . View 3 Replies .

Hp Photosmart C5280 Printer Will Not Work

Windows 7 will not accept photosmart c5280 setup mode to load printer onto laptop. Loading printer back onto laptop. Previously had os vista upgraded to windows 7 and now hp photosmart printer will not work, and will not let me reload program.

Posted On: 2010-03-25 . View Related Posts . . View 2 Replies .

Hp Photosmart C5550 Printer Problem

I have a new computer, windows 7, ms office suite loaded. Moved all my old ms documents to new computer, and now the xl docs will not accept printer? Printer is hp c5550 photosmart. I continually get a dialog box when i try to print any of my excel docs. There is no problem in my computer talking to the printer in any program outside of ms office, or when printing power point or word docs transferred to my new setup - only the xl spreadsheets. I have repeatedly tried working thru the recommended "fixes" without success (checking cables, ink, paper, power, everything short of removing and reinstalling drivers).

Posted On: 2009-10-27 . View Related Posts . . View 5 Replies .

Hp Photosmart 2610 Printer Issue

Windows 7 rc with hp photosmart 2610 xi printer. Printer installed automatically and will print out a test page. Will also print from word. When trying to print a photo from picture viewer it never makes it to the printer. There is nothing in the out que and has locked up the pc. Tried reinstalling the printer with no luck.

Anyone else having this problem with their hp printer? In the devices and printer window it shows that i need to troubleshoot the printer, but then cannot find the issue to fix.


Posted On: 2009-05-16 . View Related Posts . . View 2 Replies .

Hp Photosmart D7560 Printer Lock

If my printer is on and a restart from update or i start my computer in the morning and happen to have turned the printer on prior to starting it lock up my computer. I try to restart it goes through windows repair and says it cannot resolve the problem. I have to start of and go to recovery and select and earlier start date and it works as long and the printer is not on. I know how to solve the problem. Don't have the printer on. Learned my lesson and i have another friend with same problem. Perhaps microsoft should know. I tried to tell hp did not receive an answer.

Posted On: 2010-05-10 . View Related Posts . . View 2 Replies .

Hp Photosmart C6180 Printer Problem

I have a pc and a lap top both with windows 7 ultimate and have set up a home group. My printer is a hp photosmart c6180. When i try to print from the lap top the document shows up in the queue but, does not print. How do i fix the problem?

Posted On: 2010-06-18 . View Related Posts . . View 4 Replies .

Hp Photosmart C6300 Wireless Printer Issue

Connecting a new windows 7 laptop (sony vaio) to an existing hp wireless printer that will be shared with two existing xp computers - one laptop and a desktop. After connecting my new sony vaio, which is running windows 7, to an existing wireless hp photosmart c6300 printer, a second laptop in my home (running xp) can no longer access the wireless printer; the printer had been removed from the computer. I set up a home group unintentionally when i set up the printer on my new laptop.

I was asked if i was going to "share a printer" and i selected "yes", but i do not need a home group because i'm not sharing anything other than the printer. I have uninstalled the printer on my windows 7 laptop and reinstalled it, but it seems once the home group is set up, it is there to stay. I'm able to print from the windows 7 computer as well as the desktop xp, but not the second xp laptop. Any ideas on how to remedy this issue?


Posted On: 2010-07-01 . View Related Posts . . View 2 Replies .

Hp Photosmart 3210 Printer Installation Problem

Hp photosmart 3210 all-in-one printer stops midway through the installation and a window appears stating that there are issues stopping installation. Slbcsp.dll i recently upgraded from vista to windows 7. When i tried to reload my hp photosmart 3210 all-in-one printer on my computer, it stops midway through the installation and a window appears stating that there are issues stopping installation. For more information about what issues are bocking the installation, select each item below.

When i click on one of the four issues (slbcsp.dll, sccbase.dll, gpkcsp.dll, enum), i get the following msg: this registry key does not exist and is required for installation to continue. Please ensure that the registry key exists and click retry to continue installation.


Posted On: 2010-08-02 . View Related Posts . . View 4 Replies .

Hp Photosmart Printer - The Rpc Server Is Unavailable

While trying to use the printer (hp photosmart c5180) i received the message "the rpc server is unavailable. I have a recently purchased samsung x520 laptop with windows 7 installed. The printer worked initially. Why when i try to print the message rpc server is unavailable comes up?

Posted On: 2009-11-23 . View Related Posts . . View 2 Replies .

Hp Photosmart C6180 Wireless Printer Problem

I've wrestled with this problem for several weeks. I have a hp dv3 laptop on a homegroup network. I have an hp photosmart 6180 (wireless) printer. My desktop pc can print, my wife's laptop can print, but i cannot. When try to print everything seems to go as it should with no errors, no delays. To all intents i should have a printout, but i don't. My wife has the same model laptop, and can print directly to the printer using her installed drivers, or via homegroup printer sharing with our desktop.

I have uninstalled and reinstalled and everything seems ok. The hp solution centre tells me the printer is there and even allows me to access the printer settings on an html page from my laptop. I even can see the ink level, but i cannot print. My laptop is windows 7 home premium, my wife the same and the desktop has win 7 ultimate.


Posted On: 2010-04-09 . View Related Posts . . View 2 Replies .

Hp Photosmart C7250 Wireless Printer Wont Print

I have a hp photosmart c7250 wireless printer, since i installed windows 7, it installed correctly recognizes it but wont print? My other computer prints fine. Wireless hp c7250 printer-it installed seen it on the network (linksys wireless router) every thing seams normal, but when i hit print nothing happens?

Posted On: 2009-12-17 . View Related Posts . . View 2 Replies .

Serial Usb Device Partial Functionality In Win 7

I have two computers both running a program called ham radio delux. It works well in both xp (sony vaio) and 7 (toshiba laptop) but on the laptop the frequency shown on the software display is not the frequency that the radio is tuned to. When i command the radio to change frequency, the proper  frequency is shown briefly, then the computer display changes and a frequency that the radio is not capable of tuning is displayed.

The frequency tuned in the radio is not affected. I use the same cables to communicate with the radio for each computer. So they are not the problem. I have the updated the drivers in the laptop running windows 7. I have reloaded the software and triple checked the settings. I have spoken to the iogear people(the usb-serial interface technicians) they don' t have any guesses. I don't know what to try next.


Posted On: 2010-07-08 . View Related Posts . . View 3 Replies .

Email Prints Left / Blank Half Of Emails

I had this problem in windows xp before switching to windows 7 (i used the files and settings transfer to a clean install of windows 7). When i print from windows mail (and outlook back when i was using xp), it only prints the left half of the page, the right half is blank. My current computer is a new hp model, and the printer is going through usb and is an hp laserjet 1200 series.pdfs print fine, word documents print fine, seems to be only the emails that don't print well.

Posted On: 2010-02-27 . View Related Posts . . View 2 Replies .

Print Problem - Ie Prints Pdf File As Mirror Image

When i try to print a pdf file from ie it prints as a mirror image. I can change this in the printer driver, but the next time it will default to mirror printing again. If i copy the file to the desktop, open it from there and print, everything is. I have asked hp (printer manufacturer) and they say that since it prints ok from the desktop, it is not a printer problem.

Posted On: 2009-12-09 . View Related Posts . . View 2 Replies .

Cannot Complete Login

I've got this machine i built not too long ago, been working great. Moved to a new location and went to fire it up, enter my password and it shows 'welcome' spinner and that's the last thing it ever does.

Boots fine in safe mode.
Went into msconfig and removed everything that made any sense.
Un-joined it from the domain
Turned off the firewall
Set the bios back to defaults (no clocking = slow)
Getting the 7001 error in event viewer
Also getting a 1005 on dcom w/ the shellhwdetection

Stumped.

Hate to re-install, it was running so nicely.


Posted On: 2010-03-09 . View Related Posts . . View 7 Replies .

There Is Not Enough Space Available To Complete This Operation

I install windows 7 upgrading from windows xp. My total hard disk is 500gb. But after installing windows 7 it shows 150gb disk space is unallocated. I tried in disk management i.e right clicking on "150gb unallocated disk" then new simple volume. Then format then next-next then finish and it shows error "there is not enough space available to complete this operation". N haa, i have done system restore in windows xp. Since pc gone slow & with sum problems.

But it doesn't work. Therefore, i installed windows 7 which retain pc faster. I think system restore occupy that 150gb disk space. So it's showing unallocated. How to retain back my total 500gb back. Give me proper solution.


Posted On: 2010-06-10 . View Related Posts . . View 3 Replies .

Cannot Complete System Restore

When doing a system restore i get the message that system restore did not complete and no files were changed. I'm running windows 7 on a 64bit computer. I have tried doing a restore from safe mode, from a dos prompt and i have uninstalled my virus protection and firewall and still no luck. My system is operating properly in all respects. I was running some media server software named playon and was having some issues so their tech support told me to change some networking options. I had to uninstall that software and now it will not let me reinstall so i am trying to do a system restore to a point before i changed the network settings.

Posted On: 2010-06-26 . View Related Posts . . View 8 Replies .

Cannot Complete Upgrade - Installation Just Stops

Cannot complete upgrade from win vista home premium 64 to win 7 home premium 64 using student offer, installation just stops at transferring files, settings and programs with no hd activity. I have tried upgrading my pc from vista home premium 64 to windows 7 home premium 64 four separate times, using microsoft's academic upgrade offer.

I use the upgrade option in installation, have tried both "online get latest installations updates" and "do not get latest install updates" and my upgrade goes fine all the way to the end when it should be moving my files, settings, and programs over to win 7  from vista, this is after win 7 has been installed at this point everything just stops, no hd activity, computer is not locked up though, caps lock still works, can move mouse, can even hit the x button in the installation window and get the message "installation cannot be canceled now. Etc. ", But the computer is not doing anything because no hd activity, i even left it on for 8 hours and no movement what so ever once it gets to this point.

I ran microsoft windows upgrade advisor the downloadable one and the one win 7 installation runs, and according to it everything should upgrade fine. I know this is extremely frustrating, i updated my drivers and everything yet it still get stuck at the end. I think doing a custom install would work, but i did not want to have to re-install everything, if i would have wanted to do a clean install, i would have purchased win 7 professional for the same price as home premium, since it is the version i preferred, but just to lazy to re-install everything on my pc.

The pc i am trying to install it on is a new system, just built in march of this year, core i7 920 system, and i even took it back down to stock clock in the bios, just in case that was causing problems. Anyone have any ideas, besides doing a custom install?


Posted On: 2009-11-08 . View Related Posts . . View 4 Replies .

Unable To Get Complete Channel List

Where do i begin?I am running a wireless network using a cable modem that has a cisco wgt54 wireless router hooked to it. I am also running a cat 5 cable from the router to my desktop. The desktop also has wireless and sees my wireless network. I have a panasonic th-50pz850u 50" hd plasma tv. It has an rj-45 jack for internet access. I currently have a game adapter (bridge) attached in order to get vieracast and firmware updates. I just bought a gateway dx4300-17 desktop that has a tv tuner card, it also has the microsoft ehome infrared transceiver which seems to be working.

The desktop came with a windows media player remote. I am running windows 7 home premium x64i am using a samsung t260hd lcd monitor with has an internal tv tuner card. (1080p)i have split my incoming cable coax to go to the cable modem and to the samsung monitor tv in connector. I have scanned for tv channels (using samsung setup). I received about 60 digital channels and 10 analog channels. When i bought the dx4300 and put the cable coax to the tv tuner (from samsung monitor) i brought up windows media player.

I have configured the monitor and scanned for channels using the "task" option in wmp. I can only discover 9 channels (all local). I have tried every way possible to configure using wpm. If i try to install the tv guide (manual scan) i get a blue screen of death and the computer reboots. So i skip that section. Question 1 - how can i best use the ehome infrared transceiver (clueless to what it does)?Question 2 - why do i scan much more channels on my monitor tv tuner card than wmp/dx4300? I'm using the same cable coax. Question 3- how can i best use the complete system to achieve the optium value of all devices?


Posted On: 2010-07-11 . View Related Posts . . View 2 Replies .

Autoforms Complete Stopped Working

I have seen many posts, questions and answers on this topic. None of them worked for me and judging from what i have seen, i am not the only one. When it stopped working, no settings had been changed and no new software added. All my settings are set for it to work. I have reset these settings and unchecked all boxes, rebooted and checked them again. I was told this would reset them. This did not work. I was told about registry entries, all mine checked with what i was told. The only one that didn't was an internet explorer under policies. My registry does not have this entry.

Posted On: 2010-01-31 . View Related Posts . . View 2 Replies .

Update Won't Complete

I got into work this morning and there was a notice on my computer to restart in order to complete the update process. So i shut down all my applications and clicked ok to restart. It went through the usual stage 1 of 3 update, then restarted my computer, and then it got to the stage 3 of 3: 0% complete - the nothing. No disk activity, nada. 20 - 25 minutes later there was suddenly a flurry of disk activity and finally the message changed state 3 of 3: 100% done - then again, nothing. It's been over 1 hour now and the update will not complete. I'd like to try restarting my computer but there is also a message "do not turn off your computer. "

I'm running vista sp 2 on a dell precision 390. What am i supposed to do now?


Posted On: 2010-02-15 . View Related Posts . . View 4 Replies .

Unable To Complete System Restore

Every time i try system restore to earlier day i cant because i have antiviruse programs running i turned norton off i still cant i was going to restore because i have all my files opining under one program like every thing is trying to open under i tunes i can go to open a file under a certain program but then my whole computer changes to that  program i have 10000 little i tunes icons on my computer now.
 
I cant restore because it says i have anti virus programs running i turned off norton and i cant find any more it still wont let me restore to earlier day.


Posted On: 2010-05-09 . View Related Posts . . View 5 Replies .

System Restore Hangs - Updates Never Complete

System restore hangs forever, windows updates never complete & installation of new programs freeze. After a scheduled windows vista update, automatic updates stopped working, among several other things: in manual mode, the progress bar freezes at 0% of the first update and never shows progress.

When i try to shutdown the pc (hp pavilion s3241la slimline desktop), the same story: automatic updates begin the installation, but with no progress, and at the end, i have to power off the pc the hard way.

In control panel->system->system protection i can't see any system restore points, the system keeps "searching" forever for those points but never displays any, and the hdd shows no activity; the "system restore. " Console isn't available too, it's button is greyed out.

Any program i try to install or upgrade never completes, installations just hang. How can i solve this?, The system is a production unit & it's not easy to stop all activities to perform a re-installation from scratch.


Posted On: 2009-11-26 . View Related Posts . . View 4 Replies .

Error 1628 Failed To Complete Installation

When i try to install a game patch i get this error :

I did this solution but it didn't help me out :

First: control panel - not using classic display

2. Click performance and maintenance

3. Administrative tools

4. Click local security policy

5. Then click software restriction policies.

6. When i did this there weren't any set. So you have to click action tab to create them. When you do so click onto enforcement.

7. Then select all users except administrator.


Posted On: 2010-02-20 . View Related Posts . . View 2 Replies .

Cannot Download Apps - Files Appears To Complete But Are Not Present

I have recently moved to a 64-bit win7 machine - with all of the fun of shifting my software that entails. Somewhere during the process ie8 stopped allowing me to download files - i get the screen for saving the file, there appears to be a download but there is nothing there. I have tried resetting to defaults twice. I have tried creating shortcuts from the 32 and 64 bits versions of ie8 on the machine. I've done the right click 'run as administrator' i'm running bitdefender 2010 (win7 compatible) and no other antivirus/firewall. Any suggestions welcomed

Posted On: 2010-07-07 . View Related Posts . . View 2 Replies .

Hp Photosmart C4280 Device Failed With Errors

Local printing to the hp photosmart c4280 all-in-one device fails with errors in the error log.network printing from the macbook pro to the same printer shared from the windows 7 machine works fine.

The errors are:

The print spooler failed to load a plug-in module c:windowssystem32spooldriversx643unidrvui.dll, error code 0xc1. See the event user data for context information.

The document microsoft word - references.doc, owned by michael, failed to print on printer hp photosmart c4200 series. Try to print the document again, or restart the print spooler.

Data type: nt emf 1. 008. Size of the spool file in bytes: 65536. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \rivendell. Win32 error code returned by the print processor: 2147500037. Unspecified error

Restarting the print spooler does not fix the issue. Installing the latest software and patches also does nothing. Setting permissions to full control for everyone on the unidrvui.dll also has no effect. Unchecking "enable bidirectional support" on the ports tab of the printer properties doesn't work either. Anyone have any other suggestions?


Posted On: 2009-12-16 . View Related Posts . . View 4 Replies .