Advertisements:




Pc Freezes On Login Screen Upon Waking From Sleep Mode


I just upgraded my whole system: m4a77d mother board, ati radeo hd 4650, amd athlon(tm) ii x2 250 processor 3. 00 ghz with 4 gb of ram on a #@ bit windows 7 operating system. When hitting any key to weak my system from sleep mode i have notice that upon awakening my mouse and key board do not register. The login command prompt is flashing but i cant do anything. No mouse or key board action at all. I end up having to power down and then re-power my system. Followed by the time consuming three stage disk check. Any clue why this is happing and what can i do to fix it.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Pc Does Not Respond After Waking From Sleep Mode

This is beginning to happen more frequently. I put my computer to sleep, and 5 minutes within logging and using anything (ex.google chrome or itunes), the application freezes. I then click alt-control-delete, but it never pops up (usually works). Then i go the taskbar and it shows a "explorer.exe not responding. ". Then the whole computer just freezes, and then only thing i can do is hold down the power button for a force shutdown. My wife's computer is also windows 7, and it always works (doesn't "not respond") when she wakes it from sleep. So its something with my computer. Is there any solution for this?

Posted On: 2010-07-15 . View Related Posts . . View 2 Replies .

Ipv6 Does Not Work After Waking Up From Sleep Mode

I had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time i wake up my computer, the ipv6 cannot work. The appearance is that i can't ping and access ipv6 website. But after some research, i realize that only the dns part is broken. When i ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if i use nslookup, i can find the ipv6 address. And the following are my tries:

Ping ipv6.google.com - not work
Ping 2a00:1450:8001::68 - does work, the ip is the ipv6.google.com address
Ping -6 ipv6.google.com - does work like the above


Posted On: 2010-03-03 . View Related Posts . . View 4 Replies .

When Waking Up From Sleep Mode, Mouse And Keyboard Not Working

When waking up from sleep mode, my mouse and keyboard remain "sleeping". How do i fix this?

Posted On: 2009-12-04 . View Related Posts . . View 2 Replies .

Alps Touch Mouse Acts Strange After Waking From Sleep Mode

Whenever my new laptop wakes from sleep mode, the touch mouse enters some wacky mode and thinks that it is in magnify mode or some other strange mode. If i can manage to open the mouse control panel screen, i can sometimes reset the mouse. Also, if i force a reboot, the mouse works just fine.

I already returned my first hp pavillion dm3 computer to office depot thinking that there was a problem with the touch mouse, but my new computer does exactly the same thing. I have installed windows live and microsoft reader and firefox since bringing the new computer home yesterday. Plus whatever popped up on my screen asking me to update it (norton, i think, did an update).

I have 14 days (13 now) to get this problem fixed before i have to make a decision of whether or not to return this laptop from where i purchased it to get my money back. I hope someone can help. Before exchanging the laptop last time, i tried re-installing the alps touch mouse, but that did not help. From reading about windows 7, it appears that there are a lot of problems with computers waking from sleep.

My current theory is that there is a software conflict. The last time this happened, however, i had closed all of my open programs before closing my laptop lid, forcing it to go to sleep. That leads me to believe that if it is a software conflict, then it is with some system software running in the background.

It is almost as though the mousepad thinks that i am using two fingers to control it. So that the magnify button comes up. I have found that if i do use two fingers when it is acting this way, that i can fool it long enough to open the mouse control screen to force a reset. Once i do that, everything works fine again until it goes to sleep and wakes up again.


Posted On: 2010-01-05 . View Related Posts . . View 2 Replies .

Login Dialog Box After Returning From Sleep Mode

When resuming after coming out of sleep mode at login dialog box, cursor and screen flashes and cursor goes back to beginning of login box. Example - if trying to enter 123456 as password, i may get to 123 then screen flashes and cursor goes back to beginning of dialog box and i continue entering password of 456 but now my entry would be 456123. Had a hard time figuring out what was going on until i actually saw the cursor reposition back to beginning - i was pulling out my hair as
I knew i was entering the correct password. Using ms7 on new hp notebook d4v, any ideas or experience with this?


Posted On: 2010-05-09 . View Related Posts . . View 7 Replies .

Screen Freezes After Login Within Few Seconds

When i first installed my windows 7 worked perfectly. Now when ever i log in after a few seconds the screen freezes. When i switch user and log in a again but i can't get past 10-15 seconds before the cycle repeats itself. I cannot function with this. Is my windows 7 defective? I thought windows 7 fixed this. My mozilla firefox browser also crashes 15-20+ times a day and my dvd drive does not work anymore both which worked fine and did not crash before when i had vista. Are both my dell studio 1737 and windows 7 home premium defective.

Posted On: 2010-01-10 . View Related Posts . . View 2 Replies .

Pc Stuck At Login Screen On Normal And Safe Mode

I turned my pc on in the morning and everything loads up until i get to the login screen and i can't do anything. The mouse doesn't move, the touchscreen doesn't do anything, and the same goes for the keyboard. I've tried "safe mode" and the same problem occurs. I've checked for errors and tried to start at last known good configuration and the problem is still there. I booted into windows vista and it worked like a charm. However, whenever i go into windows 7 the problem is present. If anyone could please help, i would be very thankful.

Posted On: 2010-02-16 . View Related Posts . . View 3 Replies .

Crashes And Debugging - Black Screen After Login, Safe Mode Ok

My laptop seems to hang after the login screen, the screen either goes completely black or sometimes shows the desktop picture and an empty taskbar, but i am unable to do anything such as task manager. Leaving the system running for 10-15 minutes after trying ctrl-alt-del will bring up some error message, but i forget what it said, i'll try to get it again.

I can get into safe mode just fine, and ran the sf diagnostic tool from there, i have attached the files it created as requested. The laptop hung on me on shutdown before this issue started and after waiting for 30 minutes for it to try to shut down normally it wasn't responding so i had to power it down. I'm thinking that might've fudged something up but i'm unsure if there were any windows updates queued at the time or not. I'm really unsure what to do at this point, there aren't any system restore points, i didn't remember turning it off but i must have at some point.


Posted On: 2012-08-14 . View Related Posts . . View 12 Replies .

Blue Screen When Entering Sleep Mode

Bsod when entering sleep mode and with system restore. I recently started to have problems with my system crashing and bsod when it went into sleep mode. I updated all of the drivers and have attempted different fixes but i cannot resolve this issue. When i attempted to do a system restore, it, too, was unsuccessful and also crashed with bsod. There is no apparent malware or virus; however, windows doesn't recognize my avira antivirus program, which is running normally.

Posted On: 2010-08-15 . View Related Posts . . View 7 Replies .

Freezes After Waking Up

I would allow my computer to go to sleep overnight and after waking up, it would freeze within the first 3 minutes. It would appear to be normal after waking up and i would be about to search the internet, use my instant messaging, etc. And suddenly the mouse and keyboard would stop working. The hdd light would be on but no movements. I had it on for 30 minutes trying to fix the problem and it wouldn't work.

Had to turn off the computer to get it to restart. The boot screen would read, resuming windows and after start up i would get an alert that the certain programs were corrupt and i needed to run chkdsk and it wouldn't allow me to use my browser or start my antivirus.
 
Once i restarted and ran chkdsk, everything works fine. I just don't know why it is happening repeatedly and is there a fix?


Posted On: 2010-03-30 . View Related Posts . . View 2 Replies .

Pc Keeps Going Back To Sleep After Waking Up

I'm having problems with my pc for the past couple weeks when i put my computer to sleep and then when i try waking it up, it will wake up for a second and the screen will turn on then just goes right back to sleep and then i try to wake it up again and it will keep doing this 4 or 5 times in a row before i can use the computer again. I have a hp computer and am running windows 7. I have no screen-saver on and in power management for change balanced plan: i have turn off the display and put the computer to sleep both set to never. My computer will also wake up in the middle of the night when its in sleep mode.

Posted On: 2010-03-07 . View Related Posts . . View 3 Replies .

Screen Flicker After Coming Back From Sleep Mode

My windows flicker after coming back from sleep mode. Disable sleep mode and it still start flickering in about 20 min. The window flickers between full screen and minimize screen. This happens when i open mozilla, internet explorer and any windows. I have to reboot to get it to reset but it is very short lived and i have to reboot again. Ll my ms updates are current. I have not downloaded any attachments. The problem started about a week ago. I tried to go back and remove any new updates from the beginning of the month (february) but i keep getting an error message that the restate did not work because the system had problems trying to reinstate my desktop. Help.

Posted On: 2010-03-02 . View Related Posts . . View 2 Replies .

Screen Only Has Background Picture Without Any Icons After Sleep Mode

When ever the computer goes to sleep and comes back on, the screen only has the background pictures with out any icons. This the second computer it is doing this. Help. What can i do to fix this problem.

Posted On: 2010-01-04 . View Related Posts . . View 2 Replies .

Black Screen Sleep Mode Issue After Win7 Upgrade

Since i have upgraded from vista to windows 7, i've been having problems with my computer. My main issue is that when i close my laptop (and it enters sleep mode), when i open it back up, its just a black screen. I click, and tap the power button, and nothing happens. The only way to get out is to hold in the power button. I never had this problem prior to the installation, and ive checked for viruses and everything came back clean. Is there some way to fix this/how do i revert to windows vista?

Posted On: 2010-01-08 . View Related Posts . . View 2 Replies .

Touchpad Keys Do Not Work When Pc Waking Up From Sleeping Mode

The keys (including touchpad) of the hp notebook with windows 7 do not work when pc waking up from the "sleeping mode". If you plug in the external mouse in the usb port, cursor moves.

1 - keys of the pc ( including the touchpad) stop responding when notebook wakes up from any mode. If you just connect external mouse, the cursor start moving again over the screen. The problem disappears after the pc is switched off and then switched on i.e. After reloading the windows 7 operating system.

2 - this problem exists from the day one when the operating system was installed.

3 - internal win7 diagnostic system doesn't show, as far as i understand, any missing driver.

Please explain the reason and the detailed algorithm to fix this problem.


Posted On: 2010-01-30 . View Related Posts . . View 2 Replies .

Microsoft Usb Mouse Freezes After Sleep

I've turned off power save on *all* usb ports+hubs+devices. The only way i can remedy the problem is to unplug the mouse from the usb port and plug it back in. The system reports reloading the driver and the mouse works until the next incidence of sleep. Mouse driver dated 6/21/2006, version 6. 1. 7600. 16385 is shown by system to the the most current. I appreciate the power saving, but i really shouldn't have to do this each time. Any help?

Posted On: 2010-08-11 . View Related Posts . . View 2 Replies .

Login Problem On Xp Mode With Integration Enabled

Yesterday bought new computer with w7 home premium, bought & installed upgrade to w7 professional. Installed virtual pc & xp mode. After many frustrating attempts to log into xp mode (after the initial time), kept getting error message "you are trying to log into your own computer. This is not allowed. " I managed to get in. Set up two accounts as administrators (no passwords) now i can log in, but only if integration is disabled. If i try to enable integration, i get another (xp professional) login screen. When i type in one of the administrator user names (no password as they were left blank), i get "unable to log on because of account restriction", or some such garbage.

Posted On: 2010-01-15 . View Related Posts . . View 5 Replies .

Bsod On Sleep Mode

Anyways heres what happen i was using my comp just fine and my friend called me out to go to the park so i left my comp in sleep mode (basically i just close my comp with out shutting it down) after a hour or so when i came back i lift my screen i had a reboot when i rebooted i had a bsod idk why so i click start windows normally and again after that i click repair windows and another one so i shut it down waited a minute turned it on and evreything seems fine now no bsod so far anyways is this virus related or is it a rootkit or something else please someone help me out here.

Ps:also i been running a processor called svhost but its a lot of them about 11

http://i44. Tinypic.com/8xts48.png

Is that normal?


Posted On: 2010-03-16 . View Related Posts . . View 14 Replies .

Troubleshooting Sleep Mode

I have a brand new hp laptop w/fingerprint reader. It's has continually had a problem coming out of sleep mode. When i was using just a password it would always tell me my password was invalid, when i started using the fingerprint reader it always says it doesn't recognize the reader. I could do a hard reboot (disconnect power and remove battery) and it would cure the issue. This last time i did a hard reboot the computer started up, the screen flashed and went black and it will not and has not allowed me to do anything. Keyboard and mouse do not function, black screen. Lights on the keyboard come on and the fans work but that's it!

Posted On: 2010-04-18 . View Related Posts . . View 2 Replies .

Problem With Sleep Mode

I have a problem with sleep mode i have a custom made computer with windows 7 64-bit everything is great. I just installed a geforce 210 video card now i have problems coming out of sleep mode the screen is blank. Now when i take this card off sleep mode works fine. I asked the vendor for support they think its because its such a low end card that could be the reason. Ok have a corsair power supply 650 watt an evga mother board enforce 730i/ geforce 9300 8 gigs of ram core 2 duo chip. And this gforce 210 in my pcie slot. I just want to know what you gys think

Core clock (mhz): 589 mhz
Processor cores: 16
Processor clock (mhz): 1402 mhz
Fill rate (billion pixels/sec. ): 4. 72
Memory amount: 512mb ddr2 on-board frame buffer
Memory frequency (effective): 800 mhz
Memory interface: 64-bit
Memory bandwidth (gb/sec): 8. 0
On-board outputs: dvi-i and hdmi and vga
Additional outputs supported:
Bus technology: pci express 2. 0

This is the info on the graphics card


Posted On: 2010-03-16 . View Related Posts . . View 10 Replies .

Black Screen Before Login

Computer was running fine until today anyways, i started up a game to play this morning and the video card driver started bugging out - it would crash and recover literally every 5 seconds. I assumed that the intel graphics update that i installed 3 days ago might have been the culprit, so i did a system restore back to the date before it was installed.

However, after the login i was presented with a black screen with simply the cursor - task manager worked, explorer.exe was apparently running but i still had a black screen :/ (although only a tenth of the usual system processes were working) i restarted the computer but now i got the black screen before login, after the windows logo shows up and does the twirly thingy o. O running in safe mode has the same result.

I'm thinking it has something to do with the video card driver, but seeing that i can't get windows to startup all the way i've no idea what to do. Tried putting in a windows 7 os disc in to reinstall but the computer doesn't detect it. I did install another program yesterday but i'm not sure if it's related. Info - windows 7 64 bit, hp pavilion dv6 laptop, 2. 1 ghz dual core, 4 gb ram, intel media graphics accelerator (intel gma 4500 mhd or something. )


Posted On: 2010-08-06 . View Related Posts . . View 2 Replies .

Black Screen After Login

I have begun the experience issues with the black screen of death problem. I am running windows 7 pro. On a samsung nc10. I get the black screen after login and am unable to use ctrl alt del to access the task manager. I am able to log into windows normally though via one of two methods - this varies. Either bash in the password really fast when the login screen appears, or wait a few minutes on the login screen then login. I have tried the prevx's fix but this has been unsuccessful. I have just checked my display drivers with samsung but the driver i have installed is upto date.

I have checked around on the web and i think the  only option is to repair install or reinstall but i don't see why this would be relevant or how i would stop the same problem from happening again in another week. I have checked for malware and don't think there is a problem i have also checked for viruses using eset smart sec. And haven't encountered any issues. Do you have any constructive advise?  Do you know when microsoft plan on releasing a fix for this issue?


Posted On: 2010-06-23 . View Related Posts . . View 2 Replies .

White Screen On Login

I am running a toshiba satellite portable computer. Upon logging into the admin user account the screen goes white and stays white. Unlike other people i am unable to get the task manager, my only options are lock, switch user, log off and change a password. I am fixing this for a friend and have never encountered this type of issue before. Safeboot results in a black screen with nothing ever happening. Same with command prompt.

I suspect it has something to do with a process starting up. Install discs are not available as this machine is roughly 3 years old and have been misplaced. Just looking for a way even if temporary to at least get the files off it i need so i can wipe the system. I hate vista with a passion. Anyone's quick and speedy response would be great!


Posted On: 2010-01-25 . View Related Posts . . View 2 Replies .

Blue Screen At Login

I bought my friend laptop after he came back from iraq cause he no longer wanted it. I was going threw changing the stuff to make it mine, like user name and what not. Well i tried to change the computer name as it was his name kebowlin-pc and it said to do this to restart the computer. I did, and now when the computer gets to windows 7 login screen it goes to the blue screen error. I have done two system restores with no luck. I have also tried changing the name back with now luck. This is what it is telling me.

Also a weird thing that i don't under stand is that the main user file is his name and it has a little lock on its pic in the user files, but i am the only person on the computer and the only admin.


Posted On: 2010-01-15 . View Related Posts . . View 4 Replies .

Win7 Would Freeze After Sleep Mode

Windows 7 would freeze after sleep mode and a hard reboot would fix it. Until this last time went to awake it up and i got the normal freeze screen when i went to hard reboot nothing happens other then my fans spin lights come on and the cd drive.

Programs you are having problems with my keyboard will not light up nor will my screen turn on. I tried removing ram and swapping it around, unplugged hard drives, unplugged everything and checked all connections and even removed the battery from my mother board. My motherboard is an asus m2n-sli deluxe with a 3. 2 duel core athlon.nvidia 8800 gt i believe.


Posted On: 2009-12-06 . View Related Posts . . View 4 Replies .

Computer Will Not Wake Up From Sleep Mode

My computer will not wake up from sleep mode and my display driver fails when i try to hook up my computer to a tv monitor with an s video cable. I am having particular problems when my computer sleeps by itself because of in activity or if i close my lap top. Also when my computer is connected to my tv monitor with an s video cable, it will flicker for a while before i receive a bsod.

Posted On: 2010-03-03 . View Related Posts . . View 2 Replies .

Keyboard Dead During Sleep Mode

To date i've been impressed with windows 7. I now have an issue that will have me moving to unix or back to windows xp if i cannot find a resolution quickly. I noticed recently when the pc was asleep that i couldn't wake it using [usb] kbd or [ps/2] mouse.

Pressing caps lock on keyboard gives no result as if power to the kbd has been removed. The only way i am able to get out of sleep mode is to press the front-panel reset button. I'm loathe to do that too often. I'm not aware of any changes made to the computer that coincided with this problem starting. Any ideas what could be going on here? Where do you start troubleshooting if the keyboard and mouse are unresponsive?


Posted On: 2009-10-20 . View Related Posts . . View 4 Replies .

Sleep Mode Restarts With Error

Problem signature:

Problem event name: bluescreen
Os version: 6. 1. 7600. 2. 0. 0. 768. 3
Locale id: 1033

Additional information about the problem:

Bccode: 116
Bcp1: fffffa8005990390
Bcp2: fffff880046c5fcc
Bcp3: 0000000000000000
Bcp4: 0000000000000002
Os version: 6_1_7600
Service pack: 0_0
Product: 768_1

Files that help describe the problem:

C:windowsminidump


Posted On: 2010-03-03 . View Related Posts . . View 9 Replies .

After Update Sleep Mode Is Broken

I had my computer set to go to sleep after about 20 minutes or so and when i would wake it up, it would immediately show the login screen and i would type my password and then the desktop would show up right away. Well then i installed some "update" and now when i go to wake my computer up it starts all the way back from my bios, running the bios initialization and essentially starting windows as if i just turned my computer on, then it takes forever to load up the password screen and after i enter my password it takes another few minutes to load my desktop. This is unacceptable its actually faster to shut my computer down and turn it back on!

Posted On: 2010-02-13 . View Related Posts . . View 2 Replies .