Advertisements:




Bsod After Connecting Samsung Syncmaster Tv


My computer crashes anywhere between 5-7 times a day. I am running an inspiron 1525 laptop
4 gb ram, 2. 4ghz processor (duel). I currently have windows 7 installed. I have been having this problem for the last 2 months. Before you assume its a virus or anything of that sort, let me promise you its not. I have a bsod log that is a mile long, and i have tried my best to debug and figure out the problem. I cant. My computer is connected into a samsung syncmaster t260hd tv. The problem began once i began using this tv/pc monitor.

I have narrowed the problem down to the monitor. Whenever its plugged in and i am watching a video on my pc through the internet, the computer will randomly crash. It happens every once and a while when i am not watching a movie, but at a ratio of 9:1. This is not a problem with dells hardware. Nothing is broken. All drivers are up-to-date. I am tech-savy enough to have tried every update from dell, intel, microsoft, and samsung.


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Samsung C630 Tv As Monitor

I just bought a samsung 32" 630 series 780p tv. It has a pc port built in. Will it be an adequate "large" monitor for ms flight sim gold?  Vista os.

Posted On: 2009-07-15 . View Related Posts . . View 2 Replies .

Samsung Ml-1610 Driver For Win7

I just buy an lase printer samsung ml-1610, i try to install drivers for printer, vista, xp, win 98, 2000, all range, no one is working with windows 7, my printer does not work. Where i can find a driver for this printer? On the website of samsung i did not find any driver to work it out with  windows 7. I also setup to run compatibility option to be compatible with all operating system from windows and no one want to work it, in administrator mode too, no result.

I try the printer on xp, vista and win 98 and is work but not under windows 7. What can i do? I don't want to use xp, vista, i want to use the printer on windows 7 and i must find an driver to work with windows 7. Does exist any setup to make it work on windows 7 the printer samsung ml-1610?
The picture of the erro (print screen) you can see at: http://www.Flickr.com/photos/33493691@n02/?Saved=1 please don't send me at samsung drivers webpage, they don't have an solution for this issue!


Posted On: 2009-10-01 . View Related Posts . . View 5 Replies .

Samsung Ml-1710 Printer With 64-bit

I just received a new computer with windows 7 64-bit. I installed my samsung ml-1710 laser printer using the "windows 7" driver on the samsung website, as recommended by microsoft. After doing so, i was able to print the test page, and all networked windows xp machines print with no problems.

The problem is that my windows 7 machine, to which the printer is connected via usb, will print the first time, but i have to cycle the ac on the printer to print additional documents. Anything after the first document just sits in the print queue for a few minutes and then disappears.

I'm relatively sure this is a samsung driver problem. Has anyone encountered or worked around this?


Posted On: 2010-02-14 . View Related Posts . . View 9 Replies .

Samsung Wep500 Bluetooth Headset Drivers

Trying to get samsung wep500 blue-tooth headset to work with windows 7 , pls provide link to drivers and getting it to work. Been trying to get bluetooth samsung wep500 to work with windows 7 anyone can advise?

Posted On: 2010-03-29 . View Related Posts . . View 2 Replies .

Samsung Ml-2150 Printer Driver Problem

Win7-64 won't install samsung ml-2150 series 64-bit printer driver to that printer on ethernet; keeps trying to install on usb.

1. New win7-64bit installation.
2. Samsung ml-2151n printer ; correct 64bit ml-2150 downloaded from samsung.com
3. Printer connected to the win7 cpu via usb: driver installs and printer works fine
4. Printer's nic on the ethernet lan (which always worked on winxp32bit) is found by browser on the win7 computer and will print a test page or otherwise control the printer as would be normal.
5. However, win 7 doesn't show the network printer in the printers/devices window
6. Add printer doesn't work; reverts to the driver that operates only via usb (grayed out when the usb cable is unplugged, which is how i'm trying to set things up).
7. Add port adds the tcp/ip port name of the printer in hex, as shown in the printer's test page printout.
8. Add printer still doesn't work.
9. Samsung won't support me since the printer is out of warranty (duh, it works fine for past 6 years, it's their stupid driver, or what?). They consider installing an old printer on a new os using their newly published driver to be a warranty issue that they won't support. Huh?
10.network is "trusted". Subnet is the same. No difference if win7 is running as homegroup or workgroup. Norton internet security is installed and doesn't give error message; see #4, above.

My question: how do i install and run this beast as a network printer so i can move it out of my office?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .

Samsung Hd502hj Hard Drive Fault Reports

I have 2 samsung hd502hj drives on my system. One is only 2 weeks old, and the other is only 8 weeks old. After my system has been running for a few hours i get a message saying that both disks are faulty. This message is then repeated every 15 minutes. However, if i restart my system as soon as the fault message appears, several hours passes before i get another fault message. If there a bug in the disk checking system.

Note. The fault messages for the newest disk started within a few hours of installation


Posted On: 2009-12-20 . View Related Posts . . View 2 Replies .

Samsung External Dvd Se-s084c Driver Issue

Samsung external dvd se-s084c worked fine with my win 7 machine (acer timeline as3810t) for a month or so. Then suddenly system stopped recognizing it. Troubleshoot found that driver service is disabled. I was unable to enable it, even if i went through disable-enable and remove-install routines as suggested on microsoft site. Recommended action was to update the driver. However, when i run update driver service, win troubleshooter claims that driver is up to date and no action is needed. Anyone has idea what to do and how to enable the driver on my machine?I suspect that driver stooped functioning after one of win 7 regular on-line updates, but i cannot tell which one. Se-s084c works without problem with my old laptop running win xp.

Posted On: 2010-08-21 . View Related Posts . . View 2 Replies .

Samsung Np-r519 Keyboard Key " And @ Wrong

I need to change the " button to be @, and visa versa, the laptop is a samsung np-r519 running on windows 7.

Posted On: 2010-03-03 . View Related Posts . . View 2 Replies .

Samsung Omnia I900 Drivers Fails To Install

I've been trying to setup my samsung omnia (i900) on windows 7 ultimate x86 rtm but the driver keeps failing to install. The phone used to work on both the beta and rc releases of windows 7 however it's not working with rtm which is odd. I've tried googling this endlessly but i've yet to find a solution that works.

Posted On: 2009-10-26 . View Related Posts . . View 3 Replies .

Syncing Samsung Intrepid Cell Phone Using Macbook

I have a macbook computer and i just purchased a samsung intrepid cell which use windows 6. 5. I wanted to sync it with my computer but they are not compatible. I cannot even download the free downloads from the windows website on my computer - it just will not accept it. I don't know what to do, do i have to start buying all this software to connect them? I would love to sync them and i would love to get some of the free downloads, how can i do this without spending a fortune? If i could not sync them i guess that would be okay but i would really like the downloads. Does anyone have any suggestions?

Posted On: 2010-04-09 . View Related Posts . . View 2 Replies .

Samsung Ml-1430 Printer Driver Software Wont Install

Samsung ml-1430 printer driver win7x64 software won't install; can't find working driver-same with samsung dvd r/w. I quite vista (32 bit) when i had an infinity of problems getting hardware and software to work (goodbye to all that $$$), now i've tried win7x64 bit and i have worse problems!  I'm getting tired of this. I may junk it all and just install xp (again) after another ms or samsung failure to make sure hardware and sw works.

I can't figure out how to make the compatibility mode work and so much more won't work. I have a 3 ghz core 2 duo e8500, 4 gigs of memory, sata ii 500 gb hard drives, decent 8800 gt's video, so it's not a slow system. I just don't get it. If i could run rfactor on a mac i would get one just to avoid the last 3 years of headaches.


Posted On: 2010-06-30 . View Related Posts . . View 2 Replies .

Rdp Not Connecting

I have windows 7 pro 64bit installed on two laptops. I have remote access enabled on both and i have setup port forwarding on the router on the home laptop for port 3389 (rebooted router of course). Rdp used to always work prior to my reload.

Now, i cannot connect. Both laptops are live, sleep/suspend mode is disabled and from my netbook i provide the proper static ip address for sure. I still cannot connect odd enough and i don't know why. I have rdp enabled in windows firewall on my home laptop, the one i'm trying to connect to.

Any suggestions?


Posted On: 2009-11-11 . View Related Posts . . View 6 Replies .

Connecting To Network

I just reinstalled windows vista to my laptop, when i try to connect to a network its says there are none, but there is b/c i have another pc connected to my internet, i used the internet earlier today before i reinstalled, so its all set up right. I've tried plugging the internet cable directly to the laptop and internet explorer still don't work. The reason i reinstalled windows vista is today along with the past 2 days, when i start up my laptop i get a pop up telling me to update to internet explorer 8, so i did, when i restarted, the dell screen would load up and then it would just go to bank black screen, with no mouse, nothing, the desktop never ever did load in just stayed blank. I'm new to this, and don't know what else to do.

Posted On: 2010-03-06 . View Related Posts . . View 4 Replies .

Connecting To Internet

I received a sony netbook for christmas which has windows 7 starter (i assume) already on it. I also received optus mobile internet which works and i was able to connect to the internet of my friend but when i got home i am unable to connect to my home internet.

When i choose internet connections and my home service it asks for a username and password. I have tired all usernames and passwords - netbook, internet provider, etc. I have a wep key and this is what i have used to connect my ps3 and psp plus other computers in the home but windows 7 doesn't seem to have this same function. Is there any way of changing the requirements so that i can use the wep key instead of the username and password? Or is this simplifying the problem too far?
We use a router/modem combo for all our other appliances. There is no button on this device that allows it to connect (this was suggested by someone).

This is totally frustrating and i was thinking of updating other computers to windows 7 but now think i will stick with xp and vista.


Posted On: 2010-01-03 . View Related Posts . . View 3 Replies .

Wireless Printer Not Connecting

I have installed a wireless printer on my computer. I am able to connect the usb cord from my printer to my computer, and print just fine, but when i try to print wirelessly, my computer pops up a message saying that the communication could not be accessed. It gives suggestions on how to fix the problem, which i have done all of except for 1. It says to check the firewall to see if it allows the computer to read the printer. But i don't know how to find the printer option in my firewall section. How do i get my wireless to work on my computer?

Posted On: 2010-04-08 . View Related Posts . . View 2 Replies .

Connecting To Home Wireless

I'll try to describe this as simply as possible. I cannot connect to my home's wireless. I can connect to my neighbors (not password protected) and my church's (password protected) networks, and begin to connect to my neighbors password protected wireless networks. My home's internet is up and running; there are multiple machines using it right now, including 3 laptops, a computer and a ps3. As i am running windows 7 on my macbook pro through bootcamp (3. 1), i can even boot into mac osx and i will be connected. The problem is this operating system, which i installed yesterday.

I think i messed up when i chose "public" network instead of "home" or "private" network during the installation. I think i've tried everything and any help is greatly appreciated. The message i get when i try to connect is essentially "windows was unable to connect to this network" note that this does happen with a few other networks around the area.


Posted On: 2010-04-12 . View Related Posts . . View 2 Replies .

Problem Connecting To Internet

I am using a toshiba laptop (bought it for christmas 2008), with windows vista service pack 2. Living in dorm at ohio state, first noticed problem trying to connect through university wireless. Problem also occurs at home, on linksys.

I got back to osu on sunday from spring break, and i couldn't connect to the internet. I use firefox, never had any problems, but it wouldn't connect. My laptop would connect to the network, but the internet wouldn't connect. I took it to the it folks here, and they did a system restore to a few days back and then used internet explorer to bring up the internet. The internet finally connected, unlike before, and everything was fine and dandy. Problem solved.

Until i got back to my dorm and i tried to use firefox again and it still wouldn't work. The internet would connect through ie, but the firefox browser wouldn't connect. (I get the error message below) i successfully downloaded opera but it gave me the same message as firefox. I tried to download chrome, and my computer wouldn't even let me start the download. So. I've been stuck using internet explorer.

[Unable to connect. Firefox can't establish a connection to the server at yahoo.com
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that firefox is permitted to access the web. ]

I made the observation that my version of ie was outdated (got the computer for christmas 2008, and i still had internet explorer 7), so i downloaded the most recent version (8). And wouldn't you know it, now the newest internet explorer won't work! My computer can connect to the network, but no up-to-date browser will let me connect to the internet!

I have removed and re-added all of my wireless networks. I have tried to take down my firewall, but that didn't work. (Firewall is back up now. ) I uninstalled firefox, and re-installed it, removed add-ons and personal information, and it still didn't work. I have run scans with ad-aware, windows defender, avast, and malwarebytes, with no report of malicious files.

I have noticed that if i allow windows to install updates, this problem occurs. I have to restore my system back a few days every time it installs an update (i have since made all installations manual until this is fixed. )

Proxy server is disabled on both firefox and ie. I hope you can help me with this problem. I am talking to people in other message boards and my complaint is climbing its way through the ranks of the ohio state it department. Hopefully someone here can be of some assistance. If you need any more information, ask.


Posted On: 2010-04-02 . View Related Posts . . View 18 Replies .

Connecting Laptop To Xp Network

I have just bought a new laptop running win7 home my home environment is xp based with several desktops hard wired to my internet wireless router my new laptop can see the router and has connected to my network for internet access via the router (wirelessly) but i cant see or connect to any of the desktops that are connected to the router? I would like to be able to see the desktops to share files etc etc, and also to use my printer which is connected to one of the desktops i'm sure this has been asked before, but i cant find a definitive answer of how to make this work.

Posted On: 2010-05-30 . View Related Posts . . View 2 Replies .

Remote Desktop Connecting

I set up a new computer with windows server 2008 and workstation windows 7 professional. The server has been in place. There are other windows 7 workstations allowing remote desktop. I have configured all the settings. I have allowed the computer to be accessed - allow access from computers running any version of remote desktop. I am using another port besides the default 3389.

I have changed the settings in the registry. I have created a rule in the firewall for a port - using port 3390. We are using other ports with the same ip address and they are working fine. I get the error that this computer cant connect to the remote computer. I even disable the firewall. I went to the site www.Canyouseeme.org. It shows the port is open and not blocked by my isp provider. What is left to check? I have matched the configuration with the other windows 7 workstation.


Posted On: 2010-06-17 . View Related Posts . . View 3 Replies .

Connecting To Shared Printer From Win7 To Xp

Connecting to a network printer on my existing all-xp network with my new win7 pci have an existing small business network with an okidata c5150 printer connected via usb to one of the pc's. I can print from any of the exiting pc's with no problem. My new pc running win7 can see the printer, can connect to the printer, but when i try to print, it shows the document is spooling (for hours) and never prints.

After restarting the win7pc, the document is still in the que, but not printing or spooling. I can restart or cancel, but the document just sits in the que, showing the last action (canceling or restarting), without ever printing or deleting. When i check the printer que on the host pc, it shows the document. If i print a document from another pc, i can not see it on the win7 que. I've connected the printer directly to the win7 machine and can print with no problem, but couldn't get any of the other pc's to see the printer when i set it up to share from the win7 machine. What am i doing wrong and how can i fix it?


Posted On: 2010-06-16 . View Related Posts . . View 2 Replies .

Trouble Connecting To Internet With Most Programs

On windows 7, mozilla firefox stopped working suddenly (couldn't load page). Went through the following steps:

- Opened ie, connected without problems.
- Checked firefox network settings. No proxies, auto ip same as ie.
- Restarted/cycled network. Still no firefox.
- Download google chrome, didn't work. Tried assortment of programs: skype, ad-aware(to see if it could update) only ie and itunes store connects to internet.
- Disabled windows firewall. Still no connectivity with all non-ie/itunes programs
- Did "netsh winsock reset" and restarted. No connectivity w/ above programs
- Did "netsh int ip reset resetlog.txt" restarted. No connectivity w/ above programs.

Any help?


Posted On: 2010-02-18 . View Related Posts . . View 2 Replies .

Usb Code 43 While Connecting To A Printer

Background: i have an existing printer (hp color laserjet 2600n) which works well with my old pc (windows xp)

I've just bought a new pc with windows 7 home premium (64-bit).

I have downloaded hp's newest driver for windows 7(64-bit) to my new pc.
"Hp_clj_2600-hb-pnp-win64-en"

I've connected the printer to the new pc via an usb cable

Problem:
Windows 7 will not install the new printerdriver.
The new pc repports:
Missing usb connection
"Unnown device"
"Windows has stopped this device because it has reported problems. (Code 43)"

This is already tried without solving the problem:
Restarting the pc
Restarting the printer
Device and printers/troubleshoot
Usb port controlled (it works fine with an usb memory stick)

Question:
How shall i get a usb connection to my printer ?


Posted On: 2010-02-14 . View Related Posts . . View 3 Replies .

Connecting Xp To Win7 File Server

I have a windows 7 ultimate desktop that serves as my computer most of the time but also the home file server. I also have a windows vista ultimate laptop and an xp pro laptop. I have the same user accounts and passwords on all computers. The vista laptop works daily with the windows 7 computer as it's server for files and all seems to work well. However the xp laptop is not used much and is off most of the time. When i do try to use it i get "access denied" errors when i try to access the files on the windows 7 desktop. Rebooting the xp computer has no effect but rebooting the windows 7 computer resolves the issue for this current time and all work well.

How do i fix this permanently?


Posted On: 2010-08-05 . View Related Posts . . View 2 Replies .

Connecting To Homegroup While On A Domain Network

I have a domain at home, so the connection is a domain network. I have one win7 box running home premium, which is my media center pc. I'd like to join my domain members to this machine's homegroup, but am obviously having problems. I have full control of my domain, are there any settings that can be changed to allow myself to join the mc7 box's homegroup? I would like to view content (movies, recorded tv, etc).

Posted On: 2010-03-24 . View Related Posts . . View 2 Replies .

Plug & Play Usb Modem Not Connecting

Plug & play usb modem not connecting to 02 network work on vista fine using it now on my old xp laptop fine but refuses to connect with 7. Uses a software called mobile partner manager from o2 website, checked for updates but no joy any ideas?

Posted On: 2009-08-11 . View Related Posts . . View 6 Replies .

Connecting Canon Ip4600 Printer Into Network

I have a simple local network pc running windows xp – wired to router- pc has canon ip4600 printer attached laptop running windows 7 – wireless connection to network.
 
On the laptop when i try to add a printer (the ip4600) the search box recognizes the pc’s printers, including the ip4600. When i select the ip4600 the windows 7 installation wizard searches for a driver – only to report "no driver found" and advises i contact canon, who in turn advise me to contact microsoft.


Posted On: 2010-03-24 . View Related Posts . . View 5 Replies .

Blue Screen When Connecting Cell Phone

I tried to connect my cellphone by bluetooth to my pc, it show a window saying "the device was not compatible" after i've done it, it came out a blue screen and shut down, i also was trying to uninstall norton internet security at the same time, and i did, so, i don't know where the mistake was, i just was able to log in in "secured mode" and i had to reinstall norton internet security to log in as normal, any help?, I really want to uninstall norton but it does n't allow me to install others anti-virus what can i do?  And the blue screen time to time appears an it is too fast for me to read it.
 


Posted On: 2010-03-01 . View Related Posts . . View 4 Replies .

Invalid Ip Address / Connecting To Home Network

When i first hooked this new laptop to my wired network everything worked fine for two days, but i haven't been able to access the internet or my network since. The only way i can get online is wireless. All my other pc's on the network are not wireless (yet). When i troubleshoot, and go through all the reset divice and so on the end result is "invalid ip address". My other pcs are hooked to the same router and they work fine, (running xp home and pro).

Posted On: 2010-04-16 . View Related Posts . . View 3 Replies .

Connecting To Xbox Live With Usb Modem

I have been experiencing a problem on connecting to xbox live with windows 7 and usb-modem in my pc. Back when i had my old pc with xp connecting worked fine with crossed ethernet cable. I have allrdy tried to go in connection settings of my usb-modem and select to share the connection with other users. With that in xp it worked but now in windows 7 it won't work and my xbox can't connect in live. I think that it's due that my cable connection with pc -xbox is setted on public but that's the real problem. I really don't know how to change it.

I can change my usb-modems settings in the connection and sharing as underneath the connection name there is the "home network" link/button that i can click and change it. But in that pc-xbox connection there only reads public network and it's black so i can't click it to change it the sameway i did to my usb-modem connection.


Posted On: 2010-08-19 . View Related Posts . . View 4 Replies .