Backup Failed, Backup Drive No Longer Detected

Windows 7 kept bugging me about creating a backup, so i finally decided to. I chose to backup the default items onto my d: drive. I let it run, left for a bit and came back. It failed at 70ish%. Tried again. Same thing. I didn't have a whole lot of time left so i decided to just forget it.

I deleted the incomplete backup files on my d: drive (there was a c: backup file and mediaid. Bin) since there seemed to be no use for incomplete backup files.

When i got home and turned on my computer, post took longer than usual. My sata 2 drive was undetected. Sata 2 = my d drive. When windows starts to boot, it freezes when the windows animation is doing it's thing. I tried repairing and restoring from previously known good configuration and still nothing. I used my win7 disk to check for problems, and i even used that to restore to a point prior to my failed backups.

What else could i try? Why would my d: drive suddenly be undetected in bios, and why would a failed backup cause my windows installation to freeze? Edit: i unplugged the data cable from my d: drive and now windows boots. So deleting backup files royally screwed up my d: drive?

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.

Backup Error - No Writable Optical Drive Detected

I can't get a backup of netbook settings & files to go from acer aspire to wd passport essentials 320 gb hd. Error code says no optical drive detected. I am using a netbook w/o a dvd/cd player. Now when connected to the backup drive, i am getting "no writable optical drive detected. I just got this hd on black friday and was told by store personnel that it was compatible with windows 7. I even had ms to check the hd for problems, but haven't seen any problems with it yet.

Posted On: 2009-12-06 . View Related Posts . . View 3 Replies .

Recover D Drive Backup Failed

I keep getting a message telling that my recovery d drive backup failed because my d drive is almost full. When i click to do a disk cleanup i the cleanup screen which only offers to let me delete files from the recycle bin. However the recycle bin always says there ar 0 bytes in it. I need to know what files should be in the recover d drive and which i can safely delete. Is it ok to just delete everything in the file and then do a system restore? I don't recall backing up files to the recovery d drive other than doing a system restore and when i try to check to see what files are there i dont recognize what they are. My computer is a dell insperion 530

Posted On: 2009-07-20 . View Related Posts . . View 2 Replies .

Backup Files To Dvd Drive Can't Change It To Backup To "c"

Win 7 wants to backup files to dvd drive can't change it to back up to "c" and can't get the back up utility to run. Instructions run you around in circles. Dvd back up always fails. Back up utility. Back up to dvd fails want back up to "c".

Posted On: 2009-12-08 . View Related Posts . . View 2 Replies .

Can't Backup To Dvd Drive - "backup Was Unsuccessful"

I can't back up to my dvd drive. "Backup was unsuccessful". I want to run a back up on my recovery drive has 4 gig space . How many gigabite space will it use? Will the back up overwrite the information or keeps on adding?

Posted On: 2010-05-10 . View Related Posts . . View 2 Replies .

Backup Failed

I have three external drives, that were backed up each night on a vista machine by whs. I purchased a new machine, with win 7, and moved the drives to the new machine. I then installed the connector for whs, and configured the back up. Each night the back up backs up the hard drive on the new machine, but fails on the external drives. I moved them back to the old machine and they back up fine. When i move them back to the win7 machine, the internal harddrive backs up, but the external drives will not anymore. Does whs put a file to connect the drives to certain machine or something? How do i get the drives to back up some the new machine?

I also moved an internal drive from the old machine to and it does the same thing.

Posted On: 2010-02-20 . View Related Posts . . View 2 Replies .

Backup Took 3 Hours And Failed

I have hp pavilion desktop windows 7 home premium 64 bit, upgrade from vista, i was going to burn a backup movie disk, when all i got was disk drive not found. I worked hours a got that working so to test drive i tried to run backup files the first try took 3 hours and failed at 55% i retried again that time i got a complete backup but it took 2 hr's why can some one give me some insight as to fit it, in the past backup worked great.

Posted On: 2010-03-24 . View Related Posts . . View 3 Replies .

Backup Stops - Remote Procedure Call Failed

Windows 7, when running windows backup to an external hard drive "remote procedure call failed" message stops the backup.

Posted On: 2009-11-08 . View Related Posts . . View 2 Replies .

Error - Backup Failed To Create To Shadow Copy

I have a seagate freeagent xtream connected to usb port. Ran the first backup and it completed successfully. The next scheduled backup failed as well as all attempts to start backup. The message is :backup failed to create to shadow copy on the storage location. Details: the specified object was not found. Error code: 0c80780034 i deleted the backup image on the drive and tried again . No luck. The drive has plenty of space. I can't find on the internet anyone with this problem.

Posted On: 2010-06-11 . View Related Posts . . View 3 Replies .

Win 7 Virtual Xp Backup By Microsoft Backup & Restore

Windows 7 virtual xp backup by microsoft backup & restore - does it backup "both" c drives? I am running microsoft windows 7 professional with virtual windows xp. If i use microsoft backup & restore (and let it backup per its recommended selection), will it backup all my files on my "regular" windows c: drive as well as the virtual c: drive of xp?

Posted On: 2010-01-20 . View Related Posts . . View 2 Replies .

Dell Datasafe Local Backup Vs Windows Backup

I recently purchased a dell desktop with windows 7. One of the first things i did was configure all of my back-upsettings / schedule in windows. I used the recommended windows default settings in regards to what data is being backed up and set my back-up location to an attached external wd drive. All seems to be working fine. That said this machine also has dell factory installed back up software (dell datasafe local back-up) that does it's thing and backs up data to a partition on the "c" drive. My question is if i've set up windows to back up my data to an external drive do i even need the dell datasafe local back up program at all? The concern is this program is using space on my c drive and if the c drive were to crash having the back up info on it seems kind of pointless to me anyway.

Posted On: 2010-04-07 . View Related Posts . . View 2 Replies .

Backup Does Not See External Drive

I have a maxtor ethernet hard drive used for file backups. I was able to use this in vista, but after upgrading to windows 7, backup does not see this external drive, even though it shows it on my network. Windows explorer shows the network mss54d ethernet hard drive, but backup windows7 does not permit me to change from the dvd writer to the external hard drive.

Posted On: 2009-11-16 . View Related Posts . . View 2 Replies .

Backup Onto A Second External Drive

I want a second backup on a second external drive (call it "drive2"), so i'd like to either #1) copy every now and again drive1's daily backup file to drive2, or, #2) perform an occasional separate backup directly onto drive2. I'm confused about issues with both approaches. Original title: i want to backup my backup onto a second external drive; questions about approaches. With approach i want to backup my backup onto a second external drive; questions about approaches.

#1, windows doesn't permit me to just drag the backup file icon from drive1 to drive2; instead, i have to open the file and then copy itsunderlyingbackup set files, at the end of which i’m always asked about merging a folder (see graphic at do i answer yes or no? (This merge question comes up even when copying just a single backup set file. ) And, can i drag over to drive2 just the most recent backup set file, or does the backup program update older backup set files when it runs, meaning that i would have to copyeverybackup set file anytime i copy between drive1 and drive2? 

With approach #2, i can change settings within the backup program and choose drive2 as the destination, but does that affect theexistingbackup set (which i want to continue using) by creating an incremental backup file in the new destination, or does the backup program interpret a new destination as "create a totally new backup file from scratch on that new destination"? (With xp's ntbackup, you could create different "jobs" and different . Bkf files; does windows 7 backup offer a similar choice?)

Posted On: 2010-06-18 . View Related Posts . . View 8 Replies .

Backup Drive Cannot Be Accessed

The drive i've been using fine for windows backup is no longer being accepted. It still shows up fine in my computer, i can copy files to/from it, but backup claims it "cannot be accessed". If i try to change drives in backup, it doesn't see my drive in there anymore. How can i get windows backup to start seeing my drive again?

Posted On: 2010-02-19 . View Related Posts . . View 3 Replies .

Internal Drive Not Available For Backup

I had been running vista business x86 and using an internal hard drive to do backups. I upgraded to windows 7 x86 and, after changing to a processor that supported virtualization, i did an install of windows 7 x64, since it wouldn't allow an upgrade. I am now getting all the programs reinstalled and back to where i was with one exception. When i try to setup the backup destination, the internal drive is not available. I am also not able to reformat the drive because of the "trusted installer". What can i do to use the internal drive?

Posted On: 2009-10-25 . View Related Posts . . View 2 Replies .

Backup Data On D Drive And Install Win 7 On C Drive

Can i keep my data on other drive while trying to install windows 7 on one drive. I want to install windows 7 on my pc. Can i back up my data on d drive and install windows 7 on c drive. My doubt is will it erase my data on d drive as well.

Posted On: 2010-08-28 . View Related Posts . . View 4 Replies .

Backup Does Not Allow Backups To Network Drive

Win 7 home premium backup does not allow backups to a network drive but it will allow a restore from network drive. Vista home premium allowed backup and restore to a network drive. I assumed win 7 home premium would have the same capability - wrong. Win 7 allows you to restore from a network drive - so how can you restore if you can't backup there? I thought the win 7 restore capability may have been included for previous versions of backup but it doesn't recognize my old vista premium backups.

Posted On: 2009-10-28 . View Related Posts . . View 2 Replies .

Cannot Backup From One Pc To Second Hard Drive Of Other Computer

Set up windows 7 ultimate home network, but cannot backup from one computer to second hard drive of other computer. Both computers running windows 7-u. My network is wireless, and all the computers can see the other computers on the network, but when i try to backup data from one computer to another computers second hard drive, i receive the message "network error, windows cannot access
Company-pce backup disc.

You do not have permission to access company-pce backup your network administrator to request access. When i click in "for more information about permissions. The window says to check :

1. You have not created a homegroup. Yes i have.
2. Your not using a homegroup and the folder has not been shared. I think the folder is shared, but i am not certain by what it means i am not using a homegroup.
3.netork discover is turned off. It is turned on on both computers.
4. Password protected sharing is enabled. No, it is disabled.
5. The computers are not in the same workgroup. Don't know what that means.
6. Your computer does not have the latest updates for your router. Dont know what that means.

Posted On: 2010-04-29 . View Related Posts . . View 2 Replies .

Restoring Backup To A Network Drive

Is it possible to restore a backup to a network drive? I created a backup of my win7 rc to a mapped nas. I'd like to restore the backup to a folder on the nas to verify the contents of the backup before installing the full retail version. I would also like to be able to hand pick what files i copy from the nas to the new install. When i chose to restore the backup to a different location, the restore button is greyed out when selecting a folder on the w: mapped network drive. I can only click the restore button if select a location on the c: drive.

Posted On: 2009-10-22 . View Related Posts . . View 2 Replies .

Backup To External Drive Failing

Am using windows backup with an external 1tb seagate xtreme freeagent drive, on an esata connection. The drive shows up as d: normally in windows explorer. Backup seems to reach around 57% ("creating system image"), then fails, with no error message. When i check windows explorer, the external drive (d:) has vanished. Scanning for new devices in device manager re-detects the seagate drive, but re-running backup results in same error.

Only workaround which sometimes works is to format the external drive, then re-run windows backup again, but this takes hours and is very manual. Subsequent incremental backups tend to fail again.
Any suggestions please?

Posted On: 2010-04-20 . View Related Posts . . View 2 Replies .

Can I Use Usb Flash Drive For Backup ?

Can i use usb flash drive for backup in windows 7? I have tried unsuccessfully to backup my data onto a hp 4 gb flash drive that was inserted into the ubs port and i can't save backups to a flash drive
Does anyone had a solution to this problem?

Posted On: 2009-11-02 . View Related Posts . . View 2 Replies .

Cannot Manage Backup Space On More Than 1 Drive At A Time

Cannot manage backup space on more than 1 drive at a time; can view backups on more than 1 drive at a time. I make image and regular backups to 2 different usb drives - because you do not know when a backup drive will fail. Win7 backup and restore gui allows one to view backups on multiple drives at same time via "select another backup to restore files from".

Manage space only allows to manage space on the currently configured backup drive. Further - if modifying the configuration to select a different drive - you are forced to start a backup before you can manage space on that drive. - "Save settings and run backup" there may be little space on the drive - so i will have to either cancel the backup after started or configure a useless  small backup so that i can then manage space on the drive.

Posted On: 2010-05-02 . View Related Posts . . View 6 Replies .

Cannot Access Maxtor Usb Backup Drive

Windows 7 cannot access my maxtor usb backup drive but it shows it is working properly under device manager. It does not show that it is present in windows explorer. How do i get it to use the drive? I have a maxtor one touch external drive using a usb cable connection. I use it for backup. Windows 7 recognized it and created a backup image during install a couple of weeks ago. Since then it does not see the drive in windows explorer. Does not access it for backup. It does show up in device manager and indicates it is working properly. I have unistalled the driver and reinstalled it and the software but it still does not work.

Posted On: 2009-11-19 . View Related Posts . . View 2 Replies .

1t External Drive Full After Scheduled Backup

I have a 1t external drive. The backup is half that & scheduled for each monday evening. 2 mondays. Full drive. Now what? Am i missing something? I would think the backup utility would do a comparison of the data on the main system and the backup and make them match each time the utility is run. If it does not work this way, how can i use the back up utility? Do i have to go in each week and remove the earlier back up manually?

Posted On: 2009-11-19 . View Related Posts . . View 4 Replies .

How Do Backup Win7 To Network Attached Drive ?

How do backup a windows 7 machine to a network attached drive (wd worldbook) - using the windows backup utility? When i use the tool, it only lists a dvd drive as an option to backup, it does not find the network drive (and the tool does not seem to give you an option to search for it manually - just has a refresh button).

Posted On: 2009-11-20 . View Related Posts . . View 7 Replies .

Backup Program Cannot Choose Different Drive Destination

Windows 7 backup program. Can not choose a different destination other than d, for backup?

Posted On: 2010-03-16 . View Related Posts . . View 2 Replies .

Backup Fails Due To Corrupt C: Drive

Recently backup failed claiming a corrupted c: drive prevented some user files from being copied. On startup disc check is run automatically and reports a fault due to recently installed/upgraded software application and states that the solution is to restore to an earlier point. This fails on a series of restore points citing corrupt c: as the problem. (Some loop huh!)Regcure has been run and sped things up (a lot!) But not resolved the issue.

Windows 7 family premium is being run as an upgrade from the originally installed vista. Ny ideas please? I really don't want to reboot and start again if i can help it, especially as its an upgrade not original installation. (Most of me wants to go back to xp if i must stay on windows!).

Posted On: 2010-06-15 . View Related Posts . . View 4 Replies .

Backup And Restore Vs External Hard Drive

I have upgraded from vista ultimate to 7. I also needed to change out my 150gb hdd for a 500gb hdd. I thought the cool thing to do would be to install 7 and all my softwareon the old drive, make a backup/image of that drive onto a spare external drive, install the new drive and restore the image to the new drive.

My plan worked to perfection with one fatal flaw. The image only created 150gb of usable space on my 500gb hdd. So i reinstalled the original 150gb hdd and put the 500gb hdd into an external drive box with usb connection. The computer immediately recognized the 500gb hdd but when i look for it on computer, it won't show up.

Neither will my other external hdd's. I have tried on different usb ports and usb cables and the device manager says that all usb devices are operational. Dell precision m4300, 4gb memory, 2. 50 gh, t9300 core 2 duo 32 bit system. Extra credit: can anyone tell me why the "safely remove hardware and eject media" icon won't work? Double clicking and right mouse click have no affect.

Posted On: 2010-05-05 . View Related Posts . . View 3 Replies .

Backup On External Hard Drive Not Recognized

System: windows 7 professional
Machine: elitebook 8530w i have recently backed up my entire laptop on an external hard drive, after that i re-installed windows 7. Now i want to access a certain file from the back up, but that is not possible. If i go over control panel and click on "select another backup to restor from ", then it is not listed and i can only choose networks (why?)If i go over the windows explorer, maneuver to the file on the external hard drive and right click on the backup file, i have the option: "restore options ". That does not do anything. I can click on that as much as i want. Please help and/or fix.

Posted On: 2010-08-05 . View Related Posts . . View 3 Replies .

How To Open 1 Outlook Pst File From Backup Drive ?

How 2 open 1 outlook pst file from an backup drive. I need to restore lost files from 1 old pst file & then go back to my current and existing pst file when done. Can anyone please tell me how to do that step by step.

Posted On: 2009-12-08 . View Related Posts . . View 4 Replies .