Advertisements:




Windows Dvd Maker Won't Recognize Dvd Burner


Windows dvd maker won't recognize a dvd burner when a internet usb drive is hooked up to computer, how do we fix this?

View Full Post With 5 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Error Using Dvd Burner - Atapi Dvd Drives Listed As Scsi Devices

My atapi dvd drives (dvd rom and dvd rw) and sata hard drive are listed as scsi devices in device manager. Why is that, and is it a problem? I have frequent error when i use the dvd burner.

Posted On: 2009-12-06 . View Related Posts . . View 2 Replies .

Dvd Burner Error

When i try to bring a file to burn windows dvd burner error and go out.

Posted On: 2010-05-14 . View Related Posts . . View 2 Replies .

Dvd Maker Cannot Create The Dvd

I'm getting this like everyone else on a windows 7 64 bit. The dvd burner is turned on, working, etc. I have 251 gb of free space. The problem is that this error message is so worthless, i.e. No real specifics like "out of space" , "codec error", "invalid input file", "hey, i just don't like you"  . There is nothing to work with. The input is a home movie avi which plays just fine in windows media center. The "just die for no apparent reason" point seems to be 38% in windows media center and 17% in windows dvd maker and the blank disk is kicked out.

If nothing else microsoft ought to build a fix that at least dumps some useful error messages about the failed process so there's a direction to take. At least under dvd maker the status was "encoding" and it dies during that. Windows media center tells you nothing, but the vague error. Oh, yes i did try again after a fresh re-boot and am running nothing else. Same problem.


Posted On: 2010-08-12 . View Related Posts . . View 2 Replies .

Asus Drw-24b1lt Cd/dvd Burner Problem

Dvd/cd burner driver properties "capabilities" shows as 00000000 and does not allow burning. Win 7 ultimate fresh install new asus drw-24b1lt (cd/dvd burner)windows and sony cd architect do not detect this as burn-capable. Looking at the driver details tab and selecting the capabilities property shows 00000000. My other system (vista) shows 00000064 and three cm_devcap_* values un-installing driver and re-booting did not solve.

Posted On: 2010-08-18 . View Related Posts . . View 5 Replies .

Dvd Burner Doesn't Work Properly

I have windows 7 64 bit os in my pc. Everytime i try to make a copy of a dvd (clone it) or to burn it through an iso file (i've tried with ashampoo 9, dvd decrypter and windows iso burner) i get an error, and sometimes i don't even get an error but when i try to play the dvd it doesn't work. I clicked on troubleshoot on the drive icon in devices and printers. And i got this message: "a4n0h9so ide controller doesn't have a driver".

I don't know where can i find that driver or if that's actually the problem to begin with, because i do can burn dvds just fine when i convert an avi file (with convertxtodvd), and when i drag files to the dvd burner also. So i would appreciate a lot if any of you nice people could help me with this.


Posted On: 2010-02-02 . View Related Posts . . View 4 Replies .

Dvd Maker

Win 7. I own this dvd. So i thought i would give this a try before looking elsewhere. "Regular" dvds have about a 4gb or so capacity and so i loaded up about 4 ripped vob files totaling 3. 5gb into the program and it told me it was over capacity. It seems that the program only recognizes 150 minutes. One vob file of only 1gb takes up about 120 minutes. It seems the program will not add files by size but rather by 150 minutes max.

Is this a known limitation of the program or did i do it wrong. Do i need to convert the vob files first in order to fit more on the dvd? Btw the vob files loaded up very nicely, played well and i was able to add transitions etc. But i need a program that will let me write back to disc the 4 + gb capacity of the disc. Tia.


Posted On: 2010-03-24 . View Related Posts . . View 2 Replies .

Dvd Maker Screws Up

I have a brand new toshiba satellite that is preloaded with windows 7. I was so happy to learn that it had windows 7 dvd maker available. Once i started to load some photos for a slide show i went to preview the image slideshow. When the images began to transitions from one photo to the next and pan in and zoom out, some images would decided to kind of skip on the vertical edges. It was almost as though the images where to much for my computer to handle, but i have no other skips with any other dvd maker program, nor when i watch a movie.

What gives?
Any other people seeing this problem?
Signed
Dahsed by the dvdemise


Posted On: 2010-01-04 . View Related Posts . . View 2 Replies .

Previews Problem With Dvd Maker

I made a dvd with windows movie maker and modified it with the options. I did not burn correctly, in fact it made my video choppy and i lost some videos, meaning some of the videos i added did not come out. On the menu format i selected it shows displays of some of the videos i added to my dvd but does not play in the video itself. How can i get the videos that are on the feature menu. I chose the menu style call reflections. On the reflections boxes is where my videos are playing as a preview but not on the dvd i made. How can i get those previews out of there?

Posted On: 2010-06-05 . View Related Posts . . View 3 Replies .

Copy Disc Using Dvd Maker

Ok. Every time i go to windows dvd maker and i try to copy a dvd i made i run into several probs. First, i  have to select "all the files" because nothing shows up under "media/video/picture files" in the d drive otherwise. After selecting everything from my dvd, some of the files still get rejected from being transferred anyway!. Then when i go to click "burn" and it says i need to put in a "blank disc" which i do. After it burns for a minute and gets to about 70% it says cannot burn anymore because of a "invalid pointer. " What is that? Can you not copy a disc using windows dvd maker? If so how?

Posted On: 2010-02-16 . View Related Posts . . View 4 Replies .

Dvd Maker Encoding Error

I'm trying burn some files but the encoding always stops at 0. 6% before generating the following error.

[Window title]
Windows dvd maker
[Main instruction]
Cannot create the dvd
[Content]
An error occurred when burning the dvd.

[Ok]

A bit more background info:

- I'm running windows 7 pro
- I haven't got any other burning software (such as nero) installed
- There are 11 . Vob files to burn
- That's 106 of 150 minutes
- There aren't any effects or customized menu

Has anyone got any suggestions? Searching on the internet shows that there are people who are experiencing the same problems, but i'm not even sure what codecs are and how to check whether i have the right ones.


Posted On: 2010-03-18 . View Related Posts . . View 6 Replies .

Audio Problem With Dvd Maker

After months of trouble free operation i suddenly find no audio on all dvds burned with windows dvd maker. Using windows media player i can view and hear the files ok directly from my hd. I can also play the files ok when i select preview as part of the windows dvd maker process. I do not have windows movie maker installed. I am running oem windows 7 home edition. I thought this may have coincided with the use of proshow gold so i uninstalled that program. I also uninstalled nero 9 but the problem persists.

Posted On: 2010-03-22 . View Related Posts . . View 4 Replies .

Music For Slideshow On Dvd Maker

I am making a video/picture dvd using windows dvd maker. I am trying to add music to the slideshow part of the dvd. When i go to add music it brings me to my music library, then i click that and it brings me to itunes, then i click that and it shows all the albums in my library but when i click on an album to finally get to the song it says the folder is empty. When i look it up on my computer it is there. I am assuming i need to change the file type or something but i am not too computer savy. Please help asap. Need this for a birthday present for tomorrow (1/15/10).

Posted On: 2010-01-14 . View Related Posts . . View 2 Replies .

Dvd Maker Has Stopped Working

Have done more or less everything advicedas answered to earlier questions. I reinstalled one by one codecs, burner programs not windows etc. Checked event viewer and followed instructions, no result. Hereby what i found in the event viewer:

Faulting application name dvd maker.exe version: 6. 1. 7600. 16385, time stamp: 0x4a5bcd10
Faulting module name : unknown
Exception code: 0x0000005
Fault offset: 0x04e2a8ed
Faulting process id: 0x750
Faulting application start time: 0x01caf484db2e20ca
Faulting application path: c:programfilesdvdmakerdvdmaker.exe
Faulting module path: unknown


Posted On: 2010-05-16 . View Related Posts . . View 3 Replies .

Bug Report Dvd Maker

I have windows 7 home premium x64 with windows dvd maker file version: 6. 1. 7600. 16385 dated 07/13/2009 9:39 pm. When adding titles to be burned, dvd maker shows a time of 150 minutes on the dvd. It can not add mpg files correctly. A mpeg with 1:31 and another mpeg with 45 minutes and another mpeg 14 minutes shows 149 out of 150 minutes. This is incorrect since the blank dvd can only hold 120 minutes. Encoding starts and then there is an error. Nothing is written. I can create the dvd with 1:31 + 14 minutes dvd for 105 minutes.

Posted On: 2010-03-22 . View Related Posts . . View 3 Replies .

Dvd Maker Problem During The Burn Process

I have a sony dvd camcorder (mini disc)and sony vegas movie studio 6 software. Since getting a new laptop with windows 7 i've been having problems with vegas movie studio (i think it may not be fully compatible with windows 7). But it does manage to render my videos to a recognizable format (mpg) so i turned to windows dvd maker, which looks like a great and simple program to use initially. But like many messages on this forum i too had a problem during the burn process - mine only gets to approx. 4% and then comes up with an error message (but the error message displays no detail). What can i do? Is there an alternative? Can i burn a mini disc onto a dvd-r for example? Any help or advice would be greatly appreciated.

Posted On: 2010-03-26 . View Related Posts . . View 2 Replies .

Dvd Maker Avi Files Corrupt

I have just found out about windows dvd maker and decided to give it a go. I tried to insert a file and found out it wouldn't allow me to select an mp4 so i decided to render each scene of my dvd into avi format instead of mp4 but as soon as i try and select them i get this error message:

"0 files were successfully added. 1 file could not be added. The file c:usersedwarddesktopuntitled. Avi is not a supported file type and cannot be imported. "

I installed a codec to try and get it to work but previous to this it came up with a similar error saying that the file might be corrupt.

What can i do as its really annoying me :( i have rendered the video as a wmv and it works but it annoys me because it isn't as good quality as the avi that i rendered.


Posted On: 2010-05-03 . View Related Posts . . View 2 Replies .

Movie Maker Dvd Failed To Burn

Recently did a clean install win7 pro. Windows movie maker was included. I successfully created and saved a movie with wmm and set up to burn a dvd. Got the error msg: dvd failed to burn. Troubleshooting procedures: updated dvd drivers (they were current), reduced burn speed to slow, there are no video filters listed. Using verbatim dvd-r. Gateway multimedia fx530 2 yrs old. Raid 5. Lot's of disc space. It's a multimedia machine. 2 gb memory. 6 minute movie. I've scrapped several discs while changing speed and checking settings. This error msg appears at the last 1% of the process (progress bar).

Posted On: 2010-03-07 . View Related Posts . . View 3 Replies .

Dvd Maker Aspect Ratio Problem

I am using the windows 7 dvd maker tool, and am experiencing some major issues. I have a widescreen formatted avi file i am trying to burn onto a dvd. When i import the video, it doesn't matter which aspect ratio i choose the finished dvd is the same. Menu shows video correctly, but the movie part is squeezed into a 4:3 with black bars on all four sides.

It seems to be that windows dvd maker does not recognize the aspect ratio of the avi file imported. Although the avi file loads in media player in the widescreen format, the file listing in dvd maker clearly shows in 4:3 aspect ratios for the same file, imay sure that windows 7 dvd maker is set up correctly on (16:9).

I have wasted several dvds attempting to use multiple configurations within dvd maker and none have been successful. The dvd always burns in 4:3 aspect ration regardless of the settings chosen under the options menu. This is definitely a bug in the program.


Posted On: 2010-03-04 . View Related Posts . . View 6 Replies .

Unknown Dvd Maker Error Message

Here is a frustrating problem i am having with windows dvd maker that no one can seem to explain. I have a new computer, less than a month old, running windows 7. I have been trying to burn some home movie clips on to dvds for various friends and family. I completed 3 or 4 dvds successfully. All of a sudden, during the burning process, i get to a point about 0. 3 to 0. 4 percent encoded when i get an error message that the dvd cannot be made due to an unspecified error.

Every fresh, new, out of the package disk i try to use ends up with the same message. The clips haven't changed, the filters haven't changed, the settings haven't changed, i've just done a few successfully with no problem, now all of a sudden it can't burn any more discs. What happened? What do i need to do to fix it?


Posted On: 2010-02-09 . View Related Posts . . View 2 Replies .

Win 7 Does Not Recognize Pioneer 113 Cd/dvd Drive

Bought retail version 1-28-10 at a "big box" electronics store, a new hd 500g sata pinned down to 1. 5 g/sec tried to install 7 needed a cddvd driver  finally got installed after several different ways now still doesn't recognize my pioneer 113kg cd/dvd drive. On "my computer" i have a generic icon on cd/dvd drive  "dvd rw drive (d) seagate 0 bytes free of 687 mb cdfs" seagate is my new hd. In bios it sees the pioneer. Have a biostar p4m900-m4 mb w/ 2. 8 pentium 2 g ram nvidia 8400 series.

Posted On: 2010-02-04 . View Related Posts . . View 2 Replies .

Backup Will Not Open Dvd Drive For Insertion Of Second Empty Dvd

When running the backup to dvd the dvd gets full and you get a banner to insert a new dvd, the dvd drive will not open to eject the full dvd. You must do a boot in order for the dvd drive to open. Windows 7 backup will not open dvd drive for insertion of a second empty dvd.

Posted On: 2009-10-31 . View Related Posts . . View 2 Replies .

Unable To Play Dvd Protection Between Dvd Drive

Unable to play dvd-protection between dvd drive, decoder, & video card. Try installing updated driver. I am using windows 7 in bootcamp on a mac running snow leopard.

Posted On: 2010-03-31 . View Related Posts . . View 2 Replies .

Win 7 Asking For Dvd Driver, But It's Already Seeing Dvd Drive

Windows 7 asking for dvd driver, but it's already seeing the dvd drive. I am installing windows 7 pro on a dual xeon 5500 motherboard by supermicro. I have built a raid 1 array from embedded bios applications. Windows starts to install , after i enter the country english etc it gives me an
Error message saying "windows needs the dvd drive driver", but windows already sees the dvd drive. Is it really asking for raid drivers? When will it ask for raid drivers? In what form will it want the drivers (there is no floppy port on this motherboard.


Posted On: 2010-03-01 . View Related Posts . . View 3 Replies .

Dvd Not Recognized By Dvd Drive

I'm trying to upgrade from windows vista home premium to windows 7 home premium. I placed the disc in the dvd drive but the system does not recognize or boot the disc. Other dvds load fine. Any suggestions on what may be happening and how i can get vista to recognize the software?Thanks, dave

Posted On: 2010-06-10 . View Related Posts . . View 2 Replies .

Where Did My Cd, Dvd Go?

What has happened to my printer, cd & dvd as well as the erratic functioning of my mouse? I have run the very latest virus definitions in avast antivirus, in addition to adaware, emisoft's anti-malware and malawarebytes anti- malware programs. I even ran microsoft's own troubleshooting and fix-it solution. The ms program did detect the cd & dvd but came back with code 43 for port_#0002. Hub_#0002 and code 43 for port_#0001. Hub_#0006. What does this all mean?

Additionally, my mouse's erratic functioning varies greatly. Sometimes it works normally as it should and then in the next minute it can barely be made to move. I have a microsoft wireless mouse model # 1058 and a wireless keyboard model #5000. The optical drives are: tsst corp cd dvdw sh-s223f scsi & hl-dt-st bd-re ggw+h20l scsi. I am using win7 pro and have an amd tripe core 8650 with 4 gb of ram. I have two wd raptors running raid 0+3.


Posted On: 2010-08-13 . View Related Posts . . View 2 Replies .

Dvd Autoplay

Simple . Autoplay on the dvd cd rom drive doesn't work. I have dell inspiron 1764ok this seems to be a problem. There are suggestions on the websites but none of them work for me.microsoft wake up. You haven't provided a decent answer. Reinstalling software is a time consuming and useless answer - it don't work. I have vmware - but uninstalling this is not an option! - So don't even suggest it. Tried reg entries . Noticed that my not play auto-play in local machine /software/microsoft etc entry is set to 255 - not good i think. But what do i set it to. Tried control panel and auto-play settings. They were blank any suggestions would be helpful. This is more annoying than anything else.

Posted On: 2010-05-23 . View Related Posts . . View 3 Replies .

Cd/dvd Issue

My cd/dvd drive can read and burn cds but isn't reading dvd or dvd-rom discs. It allows me to burn data to dvd-rs, just isn't reading them or any dvds. I want to try reinstalling windows 7 or possibly even downgrade to windows vista but am afraid i won't be able to if my cd/dvd drive continues to not want to read my windows 7 disc. I checked to upgrade my drivers and have done so. Hopefully the dvd lens isn't just messed up because i don't want to buy a new one when i'm just gonna give this laptop away to my sister. Any ideas?

Posted On: 2010-05-15 . View Related Posts . . View 2 Replies .

Cannot Backup To Dvd

I have a compaq presario cq6-215dx notebook pc on which i have clean installed windows 7. (Originally the system came with vista installed). I have repeatedly attempted to back up my system with no success. Each time i"ll get through a disc or two and then i get the "backup did not complete successfully" and event viewer registers the following error- "the device, devicecdrom0, has a bad block. ". 1342 times in the last 24 hrs? This can't be the dvds. I am using sony dvd+rw, 1-4x discs. I've gone through numerous discs and refuse to keep wasting discs.could tis be a controller error. Dvd drive problem. Or a problem with the backup program.

Posted On: 2010-03-30 . View Related Posts . . View 2 Replies .

Not Able To Play Dvd

I'm having problems with mine as well with the same error message. I am using windows 7 professional 64, i have updated to all the latest drivers and am still receiving the error message "windows media player cannot play this dvd because there is a problem with a digital copy protection between your dvd drive, decoder, and video card. Try installing an updated driver for your video card. "

Older dvd's that i own are playing successfully, but those released within the last year are all receiving the same error. I have tested this on twilight, new moon, transformers and none of those mentioned are playing. The dvd's that i have listed have been purchased at wal-mart as well as best buy. The codec pack in which i am currently using is cole2k.


Posted On: 2010-04-09 . View Related Posts . . View 2 Replies .