Advertisements:




How To Get A Program Run On Startup?


Win 7 home premium i'd like to get a temperature utility program such as realtemp or core temp running on startup.core temp has a setting to have it run on startup, but it doesn't. (Neither of these are installed programs, but standalone .exe files that i run with a shortcut. )I've tried placing a short cut for either program into the startup folder but still have to start either one up manually. If i run system configuration, with either shortcut in the startup folder, it shows it being set for running on startup, but it doesn't run. http://moz.execulink.net/~jspirko/temp/system_config.jpg    

View Full Post With 5 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Chkdsk Won't Run On Startup

Whenever windows starts, i receive a message that says that there may be an inconsistency on my disk, and suggests that i permit chkdsk to run. I immediately receive a message that "disk checking has been canceled. " I was receiving this message when running the 64 bit version of windows 7, which i believe was somewhat problematic with some of me applications, so i decided to to install the 32 bit version, which works fine otherwise. The problem with chkdsk remains.

Posted On: 2010-08-12 . View Related Posts . . View 7 Replies .

Explorer Doesn't Run At Startup

Today i started my computer put in my password at the log in screen and my explorer didn't load. Just a black screen with a cursor. Ctrl+alt+deleted and ran an explorer.exe. After that i thought maybe i could fix the problem by checking if explorer was unchecked in msconfig. When i type msconfig in the start box, my computer automatically restarts.

After that i looked for a fix on this forum and tried to run my command prompt to fix it. That also restarts my computer automatically when i type it. I ran my computer in safe mode, still the explorer didn't load and same results with msconfig and the cmd prompt.


Posted On: 2010-02-02 . View Related Posts . . View 2 Replies .

This Program Is Turned Off (windows 7 Defender) Message At Startup

At every boot, i get the same message that defender is turned off. I click on the blue sentence to turn the program on and it tries, but cannot. I have ms essential running with no issues. What has to be done to stop the defender is turned off message at every startup?  Defender application itself will not open so i cannot check anything inside of it. Is there a way to reset defender to its factory settings or remove it and reinstall it without reinstalling the os?

Any advice would be helpful. I've already checked the services running place and found it is set to automatic.


Posted On: 2010-03-10 . View Related Posts . . View 25 Replies .

Second Life Program Will Not Run In Win 7

The program "second life" will not run in windows 7. It did run in windows vista prior to installing windows 7 upgrade. After installing windows 7 upgrade to my laptop running windows vista i am unable to run the program second life

Posted On: 2010-01-02 . View Related Posts . . View 5 Replies .

How To Run Enhanced 386 Program ?

How do i run an "enhanced 386" program, moneycounts for windows by parsons technology, in windows 7?Older program won't run on windows 7. Accessibility procedures don't work. It worked on xp.

Posted On: 2009-11-18 . View Related Posts . . View 4 Replies .

Error 193 Cannot Run Program

I get error 193 cannot run program. I have run registry cleaners and optimizers with no luck. Any ideas?

Posted On: 2010-05-16 . View Related Posts . . View 3 Replies .

Adobe Acrobat Won't Startup, Program Cannot Find Adobepdf.dll

In windows 7, adobe acrobat won't startup, and tries to reinstall. During reinstall, the program can not find adobepdf.dll and terminates.

Posted On: 2009-12-12 . View Related Posts . . View 3 Replies .

Sony Ereader Program Loads But Does Not Run

I upgraded from vista to windows 7 home premium 32 bit. Now sony reader will not connect. Sony claim that only preinstalled win 7 will work with their 'ereader' program. This sounds like nonsense. Can you help please?

Posted On: 2009-11-11 . View Related Posts . . View 2 Replies .

Program Cannot Be Run Because Of The Internet Connection Type

"program cannot be run because of the internet connection type" or "connect to the internet or contact your network administrator" i am having this issue with internet explorer whereby there must be a problem with the connection type settings because everytime i attempt to download either an application such as java or another search engine such as google chrome and even anti-virus such as symantec.

I am allowed to download the program but when i go to run the program i get different error messages for each application but all saying the same thing e.g. There is a problem with the internet connectivity-and this blocks the applications from running-another thing that happens is that when i get to an internet "hot-spot" where the browser is supposed to redirect to the login page of that network my internet explorer is not doing that.

Instead, it brings me to my home page and does not allow the network access page to be displayed. It also happens with skype, i downloaded it but when i went to run it, it sates: "please connect to the internet" when i am actually online on other tabs. Your help would be really appreciated.

Ps: i have tried reseting the setting for internet explorer from the advanced tab on the "internet options" window. I have also contacted my school's it center and they say that their connection is not limited in anyway (it also happens at home where i administer my network). I wanted to uninstall ie but could not find it on the "remove programs" list. Again, i have internet access but i am just not allowed to run applications and sometimes videos.


Posted On: 2010-07-14 . View Related Posts . . View 3 Replies .

Program Will Only Start If Right Click And Run As Administrator

Program will start from a shortcut on the desktop if i right click and run as administrator. If i just double click it's not allowed to run. This is one of the biggest complaints i had with vista, now it's starting to pi@@ me off all ready. The program is vectorvest prographics 6.

Posted On: 2009-11-04 . View Related Posts . . View 3 Replies .

Cannot Run Adobe Photoshop Cs3 Program

I'm trying to run adobe photoshop cs3 on windows 7 but it doesn't allow me. It says "adobe photoshop cs3 has stopped working" " a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. " I have try all compatibility options on properties but still doesn't want to run. I was running this program on a windows xp on an old computer and i passed the adobe photoshop to a flash drive and then i dragged it and dropped it to the desktop of my new computer with windows 7 os.

Posted On: 2009-12-13 . View Related Posts . . View 2 Replies .

Program I Need To Run Windows Will Not Work On 64-bit

I installed windows 7 pro 64 bit on mac with fusion. Turns out the one program i need to run windows will not work on 64 bit, or so they say. I uninstalled and re-installed the 32 bit version. Now i am being warned i only have a few days left to use the program without a new key code. Is there any way around this problem. I am not using the 64 it program, and do not want to pay for another key to run the 32 bit program. The program i need to run with windows is some little known billing program called therapist pro. I have talked to them and they will not take any responsibility for helping me with getting their program to run correctly.

Posted On: 2010-01-31 . View Related Posts . . View 2 Replies .

After Upgrade, Cannot Run Program Located In Public Folder

After an upgrade to windows 7 i can no longer run a program located in public folder. I can see it exists, browse folders, but if i try to run i get "windows cannot access the specified device, path or file. Windows cannot access the specified device, path or file. But i can browse it? It was a game, world of warcraft, that was stored in public folders under vista.

Posted On: 2009-11-26 . View Related Posts . . View 2 Replies .

Error Message - Run Dll - When Installing Any Antivirus Program

Why do i get a "run dll" error message with any virus protection program i use. The message says:

There is a problem starting
C:windowssystem32configsystemprofileappdataoamingantivirusplusantivirusplus. 70701.dll

The specified module could not be found

I tried using a different antivirus program avg and it had the same error. I'm using avira antivirus right now. Can anyone give me an idea what is the problem?


Posted On: 2010-01-20 . View Related Posts . . View 3 Replies .

Program Cannot Start Or Run Due To Incompatibility With 64-bit Version

I can't use a cd rom software with window 7. A message read "the program of feature cannot start or run due to incompatibility with 64 bit version of window". What should i do? I have a lot of cd rom programs that i use in my work with children. I can use it with window xp. Now i buy a laptop with window 7. I installed the programs, but i can't access it, cause there are incompatible with window 7 64-bit.

Posted On: 2009-11-20 . View Related Posts . . View 2 Replies .

Flight Simulator Fms Program Wont Run Because It Can't Find D3drm.dll

I am trying to download a flight simulator fms (via installation disc). The program won't run because it can't find d3drm.dll can anyone give me instruction on how to install this file.

Posted On: 2009-12-30 . View Related Posts . . View 2 Replies .

Win 7 Startup

I'm running a dell e521 which started life with vista. I upgraded months ago to windows 7. The upgrade went quite smooth. This past week i was performing a system restore to a previous date when during the process the computer rebooted which is normal. I got the dell logo, then the windows 7 start-up screen with the four little revolving lights. Then the computer progressed to the black screen with the cursor in the center and froze at that screen. I have been unable to get past this screen since. I tried rebooting with the windows 7 repair disc but with no success.

I have since bought and installed a new hard-drive and was able to extract most but not all of my files from my external hard-drive. I would like to know if there is a solution to fixing my old drive so that i can retrieve all of my data and perhaps use it as a second drive in my computer. Note; when this problem hard-drive is connected i can't get past this black screen so i cannot access my computer to find a fix.


Posted On: 2010-01-31 . View Related Posts . . View 2 Replies .

Unmute On Startup

I purchased my laptop with vista on it, with an upgrade to 7 home premium when it was released. I've since installed, but now the system automatically turns the sound on at startup. It never had a problem with vista, and i didn't mind that the very first time i booted into 7

This is particularly annoying when i'm in class and someone sends me a message and the whole class think's i'm talking away. I've had more dirty looks from instructors in the past few months than i can remember.

I know i can go through and disable all the sounds, and switch between sound schemes, but i would rather not bother going through that path 2-3 times a day. How do i get my sound settings to stay where i put them?


Posted On: 2010-01-27 . View Related Posts . . View 2 Replies .

No Startup Folder

Recently, i put a program in the startup folder in

C:usersadminappdataroamingmicrosoftwindowsstart menuprogramsstartup

I later decided that i didn't want the program to startup every time i log on, but instead of deleting the program i accidentally deleted the startup folder instead. The folder is no longer in the recycling bin. Does anyone have any idea of how to replace my startup folder because i would really like to put some programs in there.

I've tried using task scheduler, but didn't find it to be very effective. What i really need is a new startup folder.


Posted On: 2010-05-08 . View Related Posts . . View 6 Replies .

Freezes On Startup

I have a computer that is one day old and will not start up (windows 7 home premium 64 bit). It will freeze at "windows starting. " It will freeze under safe mode at the classpnp.sys file. I have attempted to boot from a recovery dvd and it will not not not boot from it and freeze, and the bios settings are set to boot from the optical drive 1st. It will freeze when i try to enter the repair console.

I am out of ideas as to what to do, and i can find no answers online.

The comlete story is as follows: i was installing various programs fine (office, symantec, turbotax 04-09, etc). After installing adobe photoshop, the os "freaked out. "  I have no other way to describe it. Various components of the screen starting flickering (not the entire screen, but certain parts of programs). The touchpad became unresponsive, jerky, and seemed to click on its own. The computer began a shutdown sequence - because updates had queued, those began installing once the os logged off. Upon power on, i made it to the welcome screen. Each time, the touchpad was unresponsive, and the keyboard seemed to have its own inputs, because it would freeze and lock me out of the system.

After a few cold shutdowns, the touchpad and keyboard stopped acting weird (i know this sounds crazy, but i swear its true), and i was able to log in. I created the recovery dvds using the vaio console, uninstalled photoshop, and did a system restore to before the photoshop installation. The computer shut down, but has never been able to completely boot into the windows welcome screen.


Posted On: 2010-03-11 . View Related Posts . . View 3 Replies .

Startup Faliure

On june 23, 2010, my computer received an auto-update from microsoft. I believe that that my computer restarted once after the update, but since then, it fails to start up at all. The computer does not usually get as far as providing me with the repair screen options, but occasionally does. Those efforts were unsuccessful. I have even tried making the repair using the os software disc. However, that was not successful. Usually, i end up with a completely black screen. Dditionally, i tried to restore the computer to three prior periods, but each attempt has failed. I received the following information after the failed repair efforts:

Problem event name: startup repair offline problem signature 01: 6. 1. 7600. 16385 problem signature 02: 6. 1. 7600. 16385 problem signature 03: unknown problem signature 04: 21201010 problem signature 05: auto failure problem signature 06: 4 problem signature 07: bad patch os version: 6. 1. 7600. 2. 0. 0. 256. 1 local id: 1033

I'm guessing that i got dinged in the update that was downloaded. Regardless, i just want to get my computer back up and working. Any suggestions on how to fix this? Yes, i have disconnected all of the external devices and still have made no progress with this problem.


Posted On: 2010-06-24 . View Related Posts . . View 2 Replies .

Uninstalled Program Still Shown On Uninstall/change Program Menu

I unistalled a game, and for good measure, i also deleted the game directory from program files. Nothing is left. However, i still find a lingering "game title" in the "uninstall/change program" menu. How do i remove it completely?

Posted On: 2010-05-04 . View Related Posts . . View 2 Replies .

Startup Programs In Win 7

Docked vs. Undocked hardware profiles. As we all know in xp i could have programs like outlook and response point load on startup when i am docked at the office. But at home where i did not need outlook and response point to load at startup they would not because they i was undocked and they were not in the startup up folder for undocked. I am aware that this hardware profiles are no longer an option in 7. But is there a was to have some programs startup when i am at the office and not when i am at home?

Posted On: 2009-10-29 . View Related Posts . . View 2 Replies .

Taskbar Freeze At Startup

I had tried several times now, but the same happend. When i upgraded first time from xp to win 7 everything went ok until a few days later. Then started the taskbar to freeze, i could not click any items in the taskbar etc. Until i start the task manager by pressing #ctrl-alt-del" when i had dne that the task bar can be used again !I had tried to run 5-6 different virus scanners, i have avg installed, nothing from any of them, i thought in the beginning it could be a problem with the csrss.exe file as in the task-manger can i not see the properties, it not come up at all, also it not show who user ise the csrss.exe, my notebook does that !

I had re-installed the win 7 2 times again, and now it seems like the taskbar freeze at sratup, so when had had started the task-manager 1 time it works all ok ! That is quite strange !Any have a brilliant idea about what is wrong ! My computer is an acer stationary, 2 gb ram. Intel core duo e4500 2. 2 ghz. Windows / 32 bit.


Posted On: 2010-06-16 . View Related Posts . . View 12 Replies .

Taskbar Freezing After Startup

When windows starts the taskbar is frozen, and i cannot click on anything. All icons on the desktop are not affected and can be clicked. When i click ctrl+alt+del, then cancel it, it goes back to normal and works fine.

I was on windows vista when this was happening. Once a installed windows 7, with an otherwise empty computer, it is still happening. As there is nothing else on my pc now, i presume it is microsoft related, or hardware.

I have tested the memory and its fine. I have checked the temperatures and there fine. The bios is upto date. There are no virus's or malware present.

I have now ran out of ideas, and for the life of me cannot work it out

I have checked on google, and used many tech forums to no avail?

Any ideas would be greatly appreciated?


Posted On: 2010-01-07 . View Related Posts . . View 4 Replies .

Startup Programs Not Starting

Have just moved a few pc's at home to windows 7 (one ultimate and the others home premium) and am having problems with startup programs not starting. The programs are all in msconfig as startup items but when i log in they don't start. All of the users are administrators but the only way to get them to start is via the start menu. When i do start them it comes up with the warning about do you want the following program make changes to your computer. Is there anyway to make these programs run at startup?

Posted On: 2010-03-06 . View Related Posts . . View 4 Replies .

Unable To Startup - Error 1a

Problem signature

Files that help describe the problem (some files may no longer be available)

Extra information about the problem

Bccode: 1a
Bcp1: 0000000000005003
Bcp2: fffff78000001000
Bcp3: 0000000000000aac
Bcp4: 00000b1200000058
Os version: 6_0_6002
Service pack: 2_0
Product: 768_1
Server information: ab92a3ab-4a1c-4fd3-b956-874f9adccbfd
Mini062010-01.dmp
Sysdata.xml
Version.txt
View a temporary copy of these files

Warning:
If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Problem event name: bluescreen
Os version: 6. 0. 6002. 2. 2. 0. 768. 3
Locale id: 1033


Posted On: 2010-06-20 . View Related Posts . . View 3 Replies .

Black Screen At Startup

Bsod? With cursor? Updated my pc to windows 7 after vista gave me the true bsod a long time ago. I couldn't make a connection to my network's router. I restarted my pc using start->shut down when i pressed the power button, startup was same as usual. Until it got stuck on the black screen with cursor. Unable to start in safe mode. F8 will not do anything. Crtl-alt-del shuts my pc down instantly. I'd tell you the specifics of my pc if i thought that would be helpful but i've been running windows 7 since it came out with no problems. It's been over a week at least since i've downloaded anything.

Posted On: 2010-06-24 . View Related Posts . . View 2 Replies .

Quicktime Error On Startup

Machine = dell studio running 64 bit windows vista with sp 2. I installed the latest version of quicktime. There was an error at the end of the install, but no error message beyond "windows installer has stopped. " Nothing specific. When i try to run quicktime, i get the "please install apple application support' error. I did some research and found that it was suggested that i re-register the vbscript.dll. I tried this, but got an error code = 0x80004004 message saying the call to the registration server failed. I don't know if this has anything to do with the original problem.

Posted On: 2010-03-05 . View Related Posts . . View 2 Replies .