Advertisements:




Update Failed For Kb947821


For the past couple of months my computer has been unable to install the kb947821 update. Everytime i turn the computer off, i get the message that it is trying to install this update. When i try to update automatically, i get the following error message:

System update readiness tool for windows vista (kb947821) [september 2009]
Installation date: ‎1/‎01/‎2010 1:22 pm
Installation status: failed
Error details: code 9370001
Update type: important

This tool is being offered because an inconsistency was found in the windows servicing store which may prevent the successful installation of future updates, service packs, and software. This tool checks your computer for such inconsistencies and tries to resolve issues if found.

More information:
http://support.microsoft.com/kb/947821
Help and support:
http://support.microsoft.com

I also tried to update manually from the website, but got the error message "installer encountered an error: 0x8007000d the data is invalid" one post suggested renaming the software distribution folder and then trying to update again, but that didn't work. Every other update has successfully installed.


View Full Post With 5 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Failed Automatic Update

I tried to update the latest microsoft updates last thursday and after 4 hours the system froze, so i canceled job and went to sign off and got the usual message "updates being applied" and 12 hours later it was still on 1 of 14, so i powered off. I then went back in and found that all updates had failed. I can not find a way to try and reinstall the updates, and when ever i try to sign off it says "installing updates 1- xxx and just stays like that for hours. Had lunch with a friend yesterday, who told me she had same problem as well as another friend that she spoke to. Any ideas would be greatly appreciated.

Posted On: 2010-06-13 . View Related Posts . . View 2 Replies .

Kb980408 Update Install Failed

Installed win7 pro on my hp desktop two days ago. Installed about 30 updates without issue but am getting hung up on one of them.

Kb980408 keeps failing. The error i get is: "windowsupdate_800b0100" "windowsupdate_dt000"

I downloaded the update and attempted a manual installation but that did not work either. I tried microsoft fixit and it did not resolve the issue even with aggressive mode. I've tried running the system update readiness tool but that didn't work for me. I've pasted the log at the end of this message if it's of any use.

The only antivirus i am running is microsoft security essentials.


Posted On: 2010-06-05 . View Related Posts . . View 7 Replies .

Security Update Kb972270 Failed Install

Security update kb972270 will not install. I've checked the services. Msi for windows installer, automatic updates, background intelligent transfer, and cryptographic services to make sure they are on automatic and started (per microsoft chat); i've disabled my av (endpoint), checked to make sure all other installs are done, and it will not install. Anyone have any ideas? This is the message after the failed install:

Installation failure
Error code: 0xd000007b
Try to install the update again, or request help from one of the following resources.


Posted On: 2010-01-20 . View Related Posts . . View 3 Replies .

Update Failed Error Code 646

I have been getting this error for over 3 months, i have tried everything suggested, and now just getting mad. I thought it was fixed because in december it downloaded. The next time it did {or tried} to do a up-date it failed, {all attempts} i am having all kinds of problems now that i was not before the download in december, host +com something is not working etc, when i try and do some downloads i get a 404 code saying it is not there the kb # is 977839.

Posted On: 2010-01-28 . View Related Posts . . View 3 Replies .

Failed Update Error Code 80070bc9

Windows update is set to automatically update and it constantly fails to update one important update - update for windows 7 for x64-based systems (kb976098) (details below). It comes back with error code 80070bc9

Download size: 482 kb

You may need to restart your computer for this update to take effect.

Update type: important

Install this update to resolve issues caused by revised daylight saving time and time zone laws in several countries. This update enables your computer to automatically adjust the computer clock on the correct date in 2009. After you install this item, you may have to restart your computer.

More information: 
http://support.microsoft.com/kb/976098

Help and support: 
http://support.microsoft.com


Posted On: 2010-01-24 . View Related Posts . . View 3 Replies .

Failed Product Key After Recent Update

A quick idea of what i'm trying to deal with. 6 moths ago i purchased and installed a sealed retail version of windows 7 ultimate, it has only ever been installed on one computer, and has spent the rest of the time hidden away in a chest with all of the other genuine microsoft operating systems i have (lots all of the way back to windows 3. 11 for workgroups). Yesterday the computer had a microsoft update downloaded and installed, since then i have a black background and a warning that i would have one day to activate with another code.

As this is a genuine copy of windows 7 and i can prove that to anyone who cares to ask me to, i would like to know why this has been blocked. I would have contacted microsoft via phone, but unlike the company i work for, that does not appear to be an option. I have installed it again on a second pc to see if it was a virus or other code causing the issue, information from mgadiag;

Diagnostic report (1. 9. 0027. 0):

Windows validation data->validation code: 0
Cached online validation code: n/a, hr = 0xc004f012
Windows product key: *****-*****-yyfpp-kk8w2-7p8mv
Windows product key hash: ri1b8gzrr6bc16t5gulv5gddqhi=
Windows product id: 00426-066-8359172-86287
Windows product id type: 5
Windows license type: retail


Posted On: 2010-05-23 . View Related Posts . . View 15 Replies .

Kb980408 Update Install Failed At 35% In Win 7

Kb980408 stops at 35% while installing, reports install failure and then reverts the update and restarts. There are no install problem codes shown. Should i just ignore this update? I don't even know exactly what it encompasses.

Posted On: 2010-04-28 . View Related Posts . . View 5 Replies .

Security Update For Microsoft Office 2003 Failed

Can someone please give me some clues. My computer will not allow this update. What is happening?  Other updates today ok. This one a no go for two weeks + ? Security update for microsoft office 2003 (kb976382)installation date: ‎4/‎06/‎2010 9:14 pm

Installation status: failed error details: code 57e update type: important security vulnerability exists in microsoft office 2003 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.

More information:
http://support.microsoft.com/kb/976382help and support:
http://support.microsoft.com/?Ln=en-us


Posted On: 2010-06-04 . View Related Posts . . View 2 Replies .

Installer Has Been Corrupted After Failed To Install Office Update

My windows installer has been corrupted since a failed to install office update (kb981715). Now i cannot install adobe reader. I have vista home premium, 32 bit on my dell inspiron 518 (purchased march 2009) last, april (2010) i had a failed to install update (kb981715) for microsoft office  2007 and after many , many hours working with a microsoft tech support, i finally was told to just hide that update because my "windows works plus" didn't need this update.

However, i believe that this "failed to install update" removed part of the windows installer and i have been unable to get updates for adobe reader and after i uninstalled that software, i could not install that new download at all.microsoft support page will not accept my correct product id, so now i can't even get that help. What will happen if i try to download a new windows installer?


Posted On: 2010-07-29 . View Related Posts . . View 4 Replies .

Update Failed Code 643 Unknown Error

Several updates failed, namely microsoft.net framework 4 client profile for windows 7 x64-based systems and security update for 2007 office. I have also been unable to update to the most recent version of itunes so i set my windows installer to manual start but i receive the message the microsoft installer service could not be accessed. This can occur if you are running windows in safe mode, or if the windows installer is not correctly installed. Please help, i cannot use my new iphone 4 fully.

Posted On: 2010-07-24 . View Related Posts . . View 2 Replies .

Security Update For Media Format Runtime Failed

I have had quite a few failed updates, but the main one says it is important, and it has failed to update 2 times already. Can someone give me a link to update it?

This is what my update history says:

Security update for windows media format runtime 11 for windows vista (kb968816)
Installation date: ‎1/‎31/‎2010 4:08 pm
Installation status: failed
Error details: code 80072efd
Update type: important

A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it. You can help protect your system by installing this update from microsoft. After you install this update, you may have to restart your system.


Posted On: 2010-02-04 . View Related Posts . . View 2 Replies .

Microsoft Office 2007 Service Pack 2 Update Failed

I purchased a new laptop yesterday running windows 7. It already had office 2007 installed, it just needed to be activated. I purchased microsoft office home and student 2007 and have activated it. Upon checking for updates via windows update, the update mentioned below failed to install where others have installed with no problem.

The 2007 microsoft office suite service pack 2 (sp2)
Installation date: ‎20/‎03/‎2010 8:51 p. M.
Installation status: failed
Error details: code 80200053
Update type: important
Service pack 2 provides the latest
Updates to the 2007 microsoft office suite. This update also applies to microsoft office project, microsoft office sharepoint designer, microsoft expression web, microsoft office visio, and visual web developer.

More information:
http://www.microsoft.com/downloads/details.aspx?Familyid=b444bf18-79ea-46c6-8a81-9db49b4ab6e5&displaylang=en

Help and support:
http://support.microsoft.com/?Ln=en-us
 
I have tried a few times now but keep getting the same result. Upon checking what version of microsoft office home and student 2007 i have it is the original version. I have also tried to download manually from microsoft's website but that didn't work either - the download failed with 6 minutes left (havn't tried to download that way again yet as new zealand internet very slow and was going to take another couple of hours) - was wondering if anyone can help me in this situation.


Posted On: 2010-03-20 . View Related Posts . . View 7 Replies .

.net Framework 3.5 Family Update Keeps Coming Back To Update List

It is the 12th time i install the microsoft .net framework 3. 5 service pack 1 and .net framework 3. 5 family update, (kb951847) x86, it keeps coming back to my windows update list. I have checked all the forums and i see a lot of people having the same problem i have. The difference is that they always say they got an error message, i didn't. I am not an expert, but i'm happy to say that i have never had trouble with windows vista. Here is the link to a screen-shot of the update history in my computer.

Posted On: 2009-11-03 . View Related Posts . . View 4 Replies .

Backup Failed

I have three external drives, that were backed up each night on a vista machine by whs. I purchased a new machine, with win 7, and moved the drives to the new machine. I then installed the connector for whs, and configured the back up. Each night the back up backs up the hard drive on the new machine, but fails on the external drives. I moved them back to the old machine and they back up fine. When i move them back to the win7 machine, the internal harddrive backs up, but the external drives will not anymore. Does whs put a file to connect the drives to certain machine or something? How do i get the drives to back up some the new machine?

I also moved an internal drive from the old machine to and it does the same thing.


Posted On: 2010-02-20 . View Related Posts . . View 2 Replies .

Windows Failed To Start

I have successfully installed windows ultimate 7. I think. I hesitate to say successfully because when i restart or shutdown and restart, more than half the time on reboot, the system i am installing windows 7 to resets and then comes to a "windows failed to start" screen.

At that point, if i choose to "start normally" it will - most of the time - start. On occasion, it will reset again, come to the "windows failed to start" screen again, i will chose "start normally" and it will this time boot. I thought at first it was a driver issue but i tried the install without the drivers and have the same issue. I have tried different keyboards, mice, etc. None of that helps. I have tried going into msconfig and unchecking "use original boot configuration". I read that this had worked in another forum with a similar problem. It was worth a try.


Posted On: 2010-02-26 . View Related Posts . . View 3 Replies .

System Recovery Failed

Running windows 7 on dell. Kept getting popups and this site unsafe popups. Tried to run malwarebytes and couldn't. I use avg virus. Tried system restore. Failed. Tried pc recovery. It failed. After system recovery failed when i chose to reboot received message on black screen. Loading pbr for descriptor 2. Done. A disk read error occurred. Press control, alt, delete to restart.

When i do that i just keep getting the same screen. Can't get to windows or safe mode. Did diagnostics and received error code 650f:136c. Msg: ide device failed. Blank media or no media is present in optical drive. Test requires media with data (resource cd, installation cd) don't have cds as this was supposed to be in computer as system recovery.


Posted On: 2010-02-10 . View Related Posts . . View 5 Replies .

Logon Service Failed

I have installed windows 7 3 times now and just had to do a system rollback today due to various errors within windows 7. Both home premium, starter and ultimate have all failed at some point. The latest problem appears that 6 ms updates went in (publish date 13th april) and upon reboot, and logging in it says the login service failed to start and then throws you back to the login screen. I had to start up in safe mode, log in and then rollback. I'm getting very frustrated now as the system won't remain stable for more than 1. 5 months before something happens.

Posted On: 2010-04-15 . View Related Posts . . View 8 Replies .

Raid Configuration Failed

Raid configuration (which is something that is recommended by microsoft) failed>>>> be carefeul - they hung up the phone on him b/c it was after business hours.

We had a redundant hard drive on my husbands computer so we could make sure we didn't loose any files on our computers. Well, within our home network we could not see each others computers which happened just recently and so we decided to do a system restore. My computer has windows 7 and my husbands does too. My system restore performed flawlessly . My husbands. Not so much - he cant even boot his computer let alone get to safe mode. We had been on the phone with microsoft for 3 hours, and i guess they wanted to send us to a different department - well they hung up on him and closed! I personally work for a customer service department and we try our hardest to get things done for our customers.

If there is a problem where we know we cannot fix before our "shift" is over, we make sure we transfer the situation to someone like a manager/expert to make sure the customer gets taken care of. Thats what customer service is all about. I am severely disappointed. By the way, the system restore erased both hard drives in the computer and now we have none of our files or programs.


Posted On: 2010-04-01 . View Related Posts . . View 4 Replies .

Server Login Failed

I have a server running on windows server 2003, all the other 5 computers are able to map the drive in the server and login with the credientials i have. The problem: i just goit a new computer, custom built, i installed a fresh copy of windows 7 everything works fine, the internet is working, i see all the computers in the network and i also see both servers in the same work-group. I can go in the server and connect to the new computer using the correct login. However, when i try to map a drive on the server, it asks for a login username and password. I type in the right info a million times, and it says login failed, unknown user or wrong password.

But all the other computers connect to the server with the same login. I cannot login the server at all, both servers. Every time i type in the login info, it just says that the login failed and it gives me a refresh ( so i can retype) and if i keep pressing enter with the "wrong password" it does not lock me out or anything, it seems like i'm not even connecting or anything. I am pretty knowledgeable with computer, this has never happened, i have tried everything, this is not something common.


Posted On: 2010-06-18 . View Related Posts . . View 3 Replies .

Failed System Image

I'm attempting to use the windows 7 back up and restore feature and get an error message during the creation of the system image:

     Windows backup encountered and error when accessing the remote shared folder. (0x8078015b)

     Additional information:
     The semaphore timeout period has expired. (0x80070079)

A backup without the system image works fine.


Posted On: 2010-01-05 . View Related Posts . . View 2 Replies .

Win 7 Failed To Boot

Windows 7 not running. Error, system doctor needs to remove file associated with microsoft office live add-in but windows will not delete file. Need help!First off, this is not about my computer, its about a friends computer, so i might not be able to provide all the information. My friend ran has mcafee antivirus on here asus laptop. She ran an update for it along with a microsoft office update. She restarted her computer and when it loaded, an error occurred and the os (windows 7) failed to load. Well, after shutting down and trying again, the ?Pc doctor?

(Unsure on exact name) searched and found the file that was causing the problem. It was a microsoft office live add-in. The program said in needed to be deleted, so she tried to delete it, but it said that the drive was protected? I am unsure what to do, but she needs her computer for her job, so if there is a non-complex way to solve the problem, i would be extremely appreciative.


Posted On: 2010-07-11 . View Related Posts . . View 6 Replies .

Backup Took 3 Hours And Failed

I have hp pavilion desktop windows 7 home premium 64 bit, upgrade from vista, i was going to burn a backup movie disk, when all i got was disk drive not found. I worked hours a got that working so to test drive i tried to run backup files the first try took 3 hours and failed at 55% i retried again that time i got a complete backup but it took 2 hr's why can some one give me some insight as to fit it, in the past backup worked great.

Posted On: 2010-03-24 . View Related Posts . . View 3 Replies .

Failed To Load Operating System

Windows 7 wont start, sometimes as if it's not there anymore, my cpu is an intel i7 860 with gpu nvidia gtx275 and 4gb of ram. It's pretty new and not even a year old yet. Overall it's not a bad computer. Anyway, like a week ago it started lagging some, then it got worse after a few days. The hdd light is always showing and i can hear the computer working hard as if i'm running many programs at once. But my from my task manager , i can see that the cpu speed is like lower than 5% and the ram like 30% which is normal. Sometimes the lag is gone and sometimes it's back.

When it happens, even when when i watch videos, the videos lag. Then later, my computer start restarts on its own. On one of the restart, after post , the desktop computer runschkdsk or something like that, that scans the c: drive for errors , i think, and i let it do that. And i can still go into the computer after. But it just goes downhill. The restarts became more often and the 'starting windows ' screen at start became longer and longer. After another restart, there was 2 options 'launch system recovery tools ' and 'start windows normally ' i cant remember if thats exactly what they are called.

I run system recovery tools and restart after that and i can still come back into the computer. I run myavast! Anti-virus program to check for virus but there isn't any. I have also tried to usesystem restore but there isn't any restore points created, which is unusual because there was always some restore points. After yet another restart later, i couldn't get back into the computer anymore. After post , at the screen of 'loading operating system . ', instead of going to 'starting windows ', it say something like 'failed to load operating system, insert the cd into cd/dvd drive '.

Sorry, i am not very good at recalling stuff. But i do not have the cd, windows 7 was installed in the pc before i bought it. So i reset the computer and it came up with 'windows error recovery ' and i have the 2 options 'launch system recovery tools ' and 'start windows normally ' like before, but this time after i use the first option, it just stops at a blank screen and nothing else.

I reset the computer again and i chose the second opting and it does nothing again (just stops at the blank screen). I keep trying to turn off and restart my computer several times now. After that, it will came up with one of these every time now : 1) insert cd 2) windows error recovery 3) it will go on to 'starting windows ' but blank screen after that.


Posted On: 2010-06-05 . View Related Posts . . View 7 Replies .

Mtp Usb Device Failed

This error occurs when i try to install my canon rebel, nikon cool pix cameras and my ipod w/camera. I have done much research and see it's a common problem. It's happened on cameras, i-phones, occasionally mp3's of all brands. It's also happened on many brands of computers. There is only 1 common thread - windows. I use windows 7 and need to use my camera now! I've paid a lot of people to help and no one can find the answer. I know i'm not alone. I've tried all usb ports. I've tried uninstalling devices. I get a mtp device w/yellow caution sign in universal serial bus drivers.

Posted On: 2010-01-18 . View Related Posts . . View 10 Replies .

Recover D Drive Backup Failed

I keep getting a message telling that my recovery d drive backup failed because my d drive is almost full. When i click to do a disk cleanup i the cleanup screen which only offers to let me delete files from the recycle bin. However the recycle bin always says there ar 0 bytes in it. I need to know what files should be in the recover d drive and which i can safely delete. Is it ok to just delete everything in the file and then do a system restore? I don't recall backing up files to the recovery d drive other than doing a system restore and when i try to check to see what files are there i dont recognize what they are. My computer is a dell insperion 530

Posted On: 2009-07-20 . View Related Posts . . View 2 Replies .

Atk0110 Driver Installation Failed

My problem is installing atk0110 driver for my p5gv-mx mother board when i wanna install this driver from my mother board cd device manager do not accept to installing it because it tells that the driver is already updated but microsoft windows update tells that a new update available for this driver when i download a new driver from asus website device manager tells my the driver is already up to date but in device manager tab this driver shows as an unknown driver.

Posted On: 2010-03-26 . View Related Posts . . View 3 Replies .

Ram Failed After Upgrade To Win7

Ram upgrade problems, i have a 32-bit computer running windows 7 and i used to run windows vista with a 2 gb ram and it worked fine. However, once i installed windows 7, i was forced to remove one gb of ram to complete the installation and so i did. But then later i put the gb of ram back in and booted up my computer only to be greeted by a blank black screen. I removed that gb and rebooted my computer and it worked just fine. Anybody know how to fix this problem? It's really annoying running on only 1 gb of ram for it is very slow.

Posted On: 2010-07-12 . View Related Posts . . View 6 Replies .

User Profile Failed To Load

I just added another user profile to my windows 7 pro machine and upon restarting the machine, i find i am locked out, entirely. The error message is: the user profile service failed the logon. The profile cannot be loaded. This happens for both users. Is there a way to recover the old user profile and bag this new one?

I read the post from tina r, back from 2009, but your solution is based on gaining access to the operating system. I have tried starting in safe mode, but the regedit files, in w7, do not clearly indicate which files are the older, bak, files.

Avshowtime

I just relaunched the machine again in safe mode and it did allow me to log in. Can i restore my old profile from here?


Posted On: 2010-03-04 . View Related Posts . . View 4 Replies .

Xp Mode Logon Connect Failed

I am using windows 7 ultimate and am trying to use the virtual pc mode to login to the xp mode. It has worked in the past, but now i get a login connect failure which reads, "the requested operation cannot be completed because the terminal connection is currently busy processing a connect operation. "

When i click on the ctrl+alt+del tab, nothing happens. I have tried managing the virtual pc tab and restoring, but there are no earlier restore points available. How do i get into the windows 7 xp mode now?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .