Advertisements:




Driver Issue With Scsi Drive Array


Upgrading from vista sp2 to windows 7 home premium. Installation won't proceed due to driver issue with scsi drive array. I cannot proceed with the installation. The installation error message tells me. For these items, make the following changes:

Install updated drivers for the following devices. Open control panel and search for "update device drivers". Disk drives: compaq scsi drive array. I have a hp 1719n desktop computer. I updated the bios. I have gone to the device manager and that item is not that there. There are no drivers with anything like that for a description. Any suggestions?


View Full Post With 6 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Lite-on Dvdrw Lh-20a1l Scsi Drive Isn't Working

My lite-on dvdrw lh-20a1l scsi drive is recognizing the blank dvd-r discs i insert as dvd-rom discs, and therefor will not allow me to burn to them. My lite-on dvdrw lh-20a1l scsi drive isn't working properly. It did when i first installed win 7, 64 bit, but since, as i was installing a burning program, it all of a sudden has started recognizing the blank dvd-r discs i insert as dvd-rom discs, and will not allow me to burn to them. I've tried several windows help pages, and found that this particular drive needs no further update of drivers, apparently the latest driver came with windows. Nyone have a suggestion.

Posted On: 2010-08-06 . View Related Posts . . View 2 Replies .

Setup Raid Array Delete All Files On Old Drive

I added a new drive and set up a raid array. This deleted all the information on my old drive. I already performed a clean install of windows 7 home premium on the new array. Now i cannot use my product key because i have the upgrade disc. Is there a way for me to input the keys to my older versions of windows so i can use the upgrade key? If i call microsoft, will they activate my windows if i provide them my vista key? I am trying to prevent installing the entire os again.

Posted On: 2010-07-19 . View Related Posts . . View 3 Replies .

Minolta Film Scsi Scanner Problem

I have a minolta film scsi scanner, dimage scan dual, and had it working in xp. The only way i could get it working in xp was to load the program as admin/safe mode. Do you have any suggestions as to how i should try and install this in windows 7? Minolta has not supported photographic products in many years. When i first installed it in xp it didn't work. Found a note which informed me that the only way to get it working in xp was in admin (safe) mode.

It was successful. Now i would like to try it on 7 but with the xp installation steps, might there be a suggestion as ti installing it on 7?


Posted On: 2009-10-28 . View Related Posts . . View 3 Replies .

Scsi / Raid Host Controller Problem

Whenever installing windows 7, it will be very close to finishing the installation, and terminate.
Earlier on in the installation it says that the scsi/raid host controller will not work once upgraded. I have upgraded the appropriate drivers, as well as several others; upgrading my bios has not helped, as others have claimed it worked for them.

Windows 7 update advisor sites the marvel miniport driver (which should be up-to-date) and steam to being two problems needing correction; other than that, nothing.

System information:
Currently running windows vista (service pack 1), bios has been updated
32-bit os
Oem computer
Dell xps, m1530

Sata (i believe) - one of my drivers does say sata in the name (said driver, intel (r) 82801em/hbm sata ahci controller may be out of date. )




Posted On: 2010-01-17 . View Related Posts . . View 2 Replies .

Raid 10 Array Process

I'm switching from xp to win 7 pro 64bit - i previously set raid 10 so have experience. This was done using f6 floppy on clean install xp pro 32bit with intel ich9r driver. I am going to do a clean install with win7 pro 64bit - i have read that in win 7 you don't need to use the same process but i am unclear what exactly occurs in the install process for win 7 - will win 7 simply recognize and install the correct drivers - or do i need to have the intel 64 bit matrix drivers ready on flash drive etc. Please confirm the process?

Ps this is hardware raid not software


Posted On: 2010-06-04 . View Related Posts . . View 2 Replies .

Error Using Dvd Burner - Atapi Dvd Drives Listed As Scsi Devices

My atapi dvd drives (dvd rom and dvd rw) and sata hard drive are listed as scsi devices in device manager. Why is that, and is it a problem? I have frequent error when i use the dvd burner.

Posted On: 2009-12-06 . View Related Posts . . View 2 Replies .

Expand Raid 5 Array That Has Win 7

Can i expand a raid 5 array that has windows 7 on it? I am building a pc with a raid 5 array that will initially have 3/4 disks. The pc will be running windows 7 (probably home premium 64-bit).
What i want to know is can i expand the raid array that will have the system partition on without reinstalling the os. I may be wanting to do two things and i would like to know how to do them if possible, and without paying for a third party piece of software to do it.

The first is to add extra disks to the array and then expand the array and system partition to use it. Would this work and how is it done? The second is to add larger disks to the array? Again, would this work and how would it be done? I realize i would have to upgrade all the disks to make use of the extra capacity, but can i then expand the system partition into the extra space?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .

Win7 Will Not Recognize Raid 0 Array

I can not get windows 7 to recognize my raid array.
 
To begin, this is a fresh install on an asus m4a78td-v evo m/b, amd phenom ii x4 955 3200 mhz, 4 gbs ddr3 memory, 2 western digital 2 tb wd20eads-00s2b0 sata 3g, and a benq dw1625 dvd burner. Nothing is over clocked and using stock video and sound.
 
When i install with a raid 0, 128 kb stripe block, fast init on, gigabyte boundary off, cache mode write through, and no use of the drivers for the raid array for the mother board as windows 7 ultimate x64, i can get to the point of the first re-boot and get a message of: windows could not prepare the computer to boot into the next phase of installation. To install windows, restart the installation. If i restart, i get the same message.
 
Same setup, but this time i use the motherboard raid drivers downloaded from asus , ahcix64s. Inf, i get an error message of windows is unable to install to the selected location. Error: 0x80300001. So i partition the 3725. 9 gb raid to 1-100 mb system partition, 2047. 9 gb primary partition, and 1677. 9 gb unallocated and get the same message for each of the 3 drives as above. If i extend the 2nd partition of 2047. 9 gb, i get the message of: failed to extend the selected partition. [Error: 0x80042468].
 
Finally, if i delete the raid array and change the bios setting for the sata port 1-6 to ide, the install will complete, but without the raid 0 array. Please, what am i doing wrong or what do i need to get the raid 0 array? 


Posted On: 2010-02-18 . View Related Posts . . View 5 Replies .

Files Gone From Another Raid Hdd Array

Windows 7 upgrade torched all mp3's, documents, pictures files that were on another redundant raid hd array. Just did the vista - win7 upgrade. Made sure everything was securely backed up on my second hard drive - actually a mirrored 2 disk raid array, though on the same system. Kicking myself for not disconnecting the drives because after the install everything is gone! 150 gigs of mp3's, years of documents and photos, everything.

Two funny things:

1) the file structure is intact. Ie, i can click through folders, say e: -> music -> u2 -> joshua tree. But then i am greeted with an empty folder. The entire file structure remains but every folder is empty

Except .

2) bring up the disk's properties window and it shows that the space is being used. The files add up to around 230 gigs and the system shows this space as in use. Click properties on any individual folder, though - ie on my music - nil.

Things i tried:

Chkdsk - no errors. Various (free) file recovery programs - no deleted/corrupt files found to recover removed drives and installed into an external hd enclosure. Identical problem, both on the target system and on my laptop that is still running vista.


Posted On: 2010-02-16 . View Related Posts . . View 4 Replies .

Using Raid 1 Array Causes Win 7 To Crash

Using a raid 1 (2 disk intel storage matrix managed) array generated in windows xp causes windows 7 (64) bit to crash on startup. I have a windows xp pro 32 bit os and just installed windows 7 pro 64 bit in a dual boot mode. I originally created 3 raid 1 mirror volumes (2 identical 1tb drives) using the intel storage matrix manager v 6. 2 in windows xp.

When i connect these drives and boot into windows 7, i get a blue screen stop error when the os recognizes the drive and attempts to load the driver for it. The arrays still work fine in xp. How can i make these raid 1 arrays compatible with windows 7 64 bit?

Conversely, when i create a raid 1 array in windows & 64 bit using two 1 tb drives and the intel storage matrix manager v 8. 9, upon booting into windows xp i get the same blue screen crash after xp see's the drive and attempts to load the driver. I would like to make the arrays usable in either os, can this be done?


Posted On: 2010-04-01 . View Related Posts . . View 2 Replies .

Load Driver - A Required Cd/dvd Drive Driver Is Missing

I tried to do fresh install of windows 7 ultimate 64 bit version (pls don't recommend 32 bit, as 64 bit support is the main reason for me to switch to win7) on my home pc and installer is requesting for additional driver. I've seen similar problems in other forum threads, however responses does not really help me.

My hw configuration is:
Msi p35 platinum + q6600 + 4 gb ram + few sata hdds + nvidia geforse 9800 gtx, i've downloaded all latest drivers from msi site. I even manage to extract drivers, which require installation (such as all inf drivers, etc). However, windows installer is rejecting all drivers (it allows to select driver but throwing "no new driver found" message after i press "next" button).

So, here is summary of my biggest frustration:
1. Why windows 7 installer rejects all latest drivers?
2. Why windows 7 upgrade advisor is saying that all devices on my computer are windows 7 compatible (on 64 bit report)
3. Why windows 7 installer does not mention device which requires new driver?
4. If microsoft is planning to run qa on its customers i'd like to get my fees!


Posted On: 2009-11-01 . View Related Posts . . View 6 Replies .

System Reserved Partition On Raid Array

Raid problem:
Mother board: asus p5ql-e.
Disks:
Port 0 - 500 gb seagate system drive - non raid
Port 1 - 500 gb seagate drive - raid
Port 2 - 500 gb seagate drive - raid
Port 3 - 1tb western digital - non raid

The raid drives were set up in bios as raid 1 (mirrored), and windows 7 installed on the system drive. The intel matrix storage console was installed, and showed volume 0 as 100 gb and volume 1 as 465. 7 gb. I did not set up two volumes in the raid bios.computer management shows that disk 1 has a "system reserved" 100 mb healthy (system, active, primary partition), and 99. 90 gb unallocated. Disk 2 is 365. 76 gb unallocated.

My problem is that i can not use these two drives. It may be possible to set them as non raid (i have not tried this), since i bought them to use as raid 1. It seems obvious that i need to delete the "system reserved" partition, but have been unable to do so. Does anyone have any suggestions? If this partition must exist somewhere on the system, can it be moved to another drive?


Posted On: 2010-01-18 . View Related Posts . . View 4 Replies .

Unable To Enter Setup For Raid 1 Array

I am upgrading to a clean install of windows 7 ultimate 64bit from windows vista ultimate 64bit. I had the same hardware configuration with vista, just formatted the drives so i have a clean install. I had the drives set up in a raid 1 configuration in vista and want to to do the same in win 7.
 
I have the hard drives plugged into the sata 1 and 2 slots and the cd/dvd plugged into the sata 3 slot, just like i did in the vista install.
 
To install the new os, i set my drive configuration in the bios to raid. Using the intel raid manager i created an array called "programs" that used the full available space of both 500 gb drives. The array shows that it is normal and bootable after creating.
 
After creating the array, i return to the bios and check the boot priority. I have the cd/dvd set to #1 and the hdd array set to #2. I do not have a floppy so that is disabled in the legacy drive section so there is no third boot option.
 
The first attempt at installation, i put the win 7 dvd in at this point, saved the bios changes and exited. The install dvd boots and after going through the initial file load gives an error that an external storage device has been disconnected or is not functioning and i need to restart. I do not have any external devices connected at this time. In the vista setup i did have and esata drive connected through the port on the back of the pc. No esata connections have ever been used on the two internal connections.
 
I powered down the computer and then re-powered. It goes through the normal started, shows the healthy raid array in the intel raid screen, says that no jmicron drives detected and then goes to the ide detect screen. The timeout shows 35 then changes to boot ready as the dvd starts to spin. After 35 seconds elapse with no change, it gives an error that says "reboot and select proper boot devices or insert boot media in selected device and hit a key"
 
I remove the dvd, replace it in the drive and hit a key and get the same error.
 
I tried the process with the vista dvd and get the same result.
 
Next i deleted the raid array and remade it and tried again with the same result.
 
Next i set the cd/dvd as the only boot device with the same result. I also tried hitting f8 during start-up to select the boot device and chose the cd/dvd and got the same result.
 
Finally, i deleted the raid array, changed the drive configuration to ide and tried the install on a single drive. That worked with no problems. The os installed and runs perfectly but i really want the os to be installed on a raid 1 array for redundancy.
 
I appreciate any help you can offer to resolve the issue and get the os installed on a raid 1 array.


Posted On: 2010-03-11 . View Related Posts . . View 2 Replies .

Rebuild Raid 1 Array Without Erasing Data On Drives

Possible to rebuild raid 1 array in windows 7 without erasing data on drives? (Want system independent raid 1 array). I would like to build a raid 1 array that can be migrated to future systems without having the data destroyed. To clarify, now i have an intel/win 7 computer. Perhaps my next system will be amd/win 8.

I don't mind being "locked in" to windows as i don't see myself changing to linux or os x, but i want the freedom to buy any hardware (not be locked in to say, intel chip-sets), upgrade to new versions of windows and keep my raid 1 array with data intact. If i create a raid 1 array in windows 7 (under computer management -> disk management for example) can i recreate that array under windows again in the future (fresh windows install) without windows formatting those drives and losing my data on them?


Posted On: 2009-12-22 . View Related Posts . . View 3 Replies .

Cannot Create Partition And Format Hdd In Raid 0 Array

I run on an msi p6n sli platinum motherboard. I have been trying for the past 4 hours to install windows 7 ultimate, but cannot figure out how to get it to work in a raid 0 configuration. I"ve download all of the sata raid drivers for my motherboard and tried loading them, but it doesn't work. The only thing that gives me any kind of reaction is when i load the xp64-bit drivers. It makes my hard-drive disappear and i have to restart the windows setup. What can i do?! This is driving
Me crazy


Posted On: 2010-04-18 . View Related Posts . . View 2 Replies .

Upgrade To Win7 On Ssd When Vista Installed On Raid 0 Array

Best way to upgrade to windows 7(64-bit) on new ssd when vista(32-bit) installed on raid 0 hard-disk array. I have a full copy of windows vista (32-bit) installed on a raid 0 array on a pair of wd 74 gb disks as my c: drive (also have a pair 500gb wd in a raid 1 array as well). I have just purchased windows 7 (64-bit) and a new intel 160gb ssd and want to upgrade to windows 7 on the ssd.

Btw i also have a full suit of adobe photoshop (cs4), lightroom (version 2), photoshop and premiere elements and on-one's plug-in suite 5 installed on the c: drive as well and would like to have them operational after upgrading to windows 7.


Posted On: 2010-05-29 . View Related Posts . . View 2 Replies .

Maxtor 3200 Hard Drive Driver

I upgraded to windows 7 - i've now tried to use my maxtor 3200 ext. Hard drive and my vaio does not find the driver. Where can i find the maxtor 3200 driver for windows 7?

Posted On: 2010-01-15 . View Related Posts . . View 2 Replies .

Raid 0 Does Not Recognize Raid Array

I have a build with 7 ultimate running swimmingly for months with 2 single 1tb 7200 disks and one 128 gb ssd single. Yesterday, i successfully created a raid 0 array of 4x 60 gb ocz ssds in the gigabyte phoenix bios but they are not recognized as a usable array by 7ult. 7ult recognizes them  as an array in devices , everest recognizes them but after booting off the 128gb ssd they are not recognized in 'my computer", are not accessible, and generally are sitting there pretty, but useless.

My idea was to clone the 128 ssd to the array with acronis or paragon and use it as a super fast boot array? Any thoughts. Windows 7 ultimate and raid 0 setup after initial setup. 7 does not recognize raid array.


Posted On: 2010-06-03 . View Related Posts . . View 2 Replies .

A Required Cd/dvd Drive Device Driver Is Missing

When installing: missing cd/dvd device driver ("a required cd/dvd drive device driver is missing). I keep getting this on the install screen with the digital river home iso install. Any work around?

Posted On: 2009-10-25 . View Related Posts . . View 65 Replies .

Win7 Can't Recognize Driver For Raid C: Drive

I am trying to upgrade from windows xp professional (32 bit) to windows 7. The installation stalls when it asks for a cd or dvd with the drivers used by my ati 1x2 mirror/raid1 scsi disk device. I tried to get it to recognize the drivers already installed on the machine. It won't, it keeps insisting on a cd or dvd. I copied the correct drivers from the xp windows/system 32 using the file identities in "hardware" under windows system to a dvd. No dice.

I downloaded the drivers from hp (the pc is a compaq/hp machine) and installed them on the dvd. Still doesn't work. Now what do i do. If i format the drive and start afresh, the upgrade disc won't find my xp system, and may not up grade. Windows claims that my machine is windows 7 ready.


Posted On: 2010-07-29 . View Related Posts . . View 2 Replies .

Maxtor 3200 Usb Hard Drive Driver

I need a driver for an external maxtor 3200 usb hard drive for windows 7 x64. All of my files are on the drive! I have an hp dv5t-1000 cto laptop. I have tried all of my usb ports, uninstalling the driver and plugging the device back in, and searching for a driver on-line. So far no luck. The device was plug and play with vista x64. I can't find a driver on-line for vista either.

Posted On: 2009-11-07 . View Related Posts . . View 4 Replies .

Required Cd/dvd Drive Device Driver Is Missing

Cannot install windows 7 64bit dvd from boot (a required cd/dvd drive device driver is missing". I have a unmodified gateway computer model gm5632e utilizing the g33 express chipset from intel. I purchased windows 7 64-bit from a store and tried installing it. Every time i get to the setup it gives the generic error: "load driver, a required cd/dvd drive. Device driver is missing". I cant get anywhere else in the setup. I understand that there may be an issue with the sata drivers. I am also sure im not the only one with this problem. Any help is much much appreciated.

Posted On: 2010-06-09 . View Related Posts . . View 2 Replies .

Device Driver For Hard Drive Upgrade Error On Hp S3620f

Trying to upgrade from windows vista 64bit to windows 7  64bit getting error need an update device driver for my hard drive, spent almost two hours with tech support case 1117693442 and the said go back to mfg for driver update. Model hp s3620f  and i have latest driver segate hd.

Posted On: 2009-11-21 . View Related Posts . . View 2 Replies .

Error - A Required Cd/dvd Drive Device Driver Is Missing

Windows 7 upgrade ultimate 64bit from windows vista home premium 64bit - error with "a required cd/dvd drive device driver is missing. I can see many posts for this problem, but the different solutions all confuse me. I am not a pc techie. I was trying to run windows 7 64bit ultimate upgrade from windows vista 64bit home premium on my pc. Before i ran windows 7 upgrade using the 64bit disk i bought from a retailer in sheffield england, i checked on the microsoft website and downloaded windows upgrade advisor.

This reported a number of minor issues, which i dealt with. It did not report any issue with my motherboard or cd/dvd device. I also downloaded easy transfer, but as i had recently rebuilt my pc i did not have many files to copy over so i have not yet used it. I have now rolled back the install, after getting very frustrated trying to obtain the "driver"some of the postings on the web suggest:buying an external usb cd/dvd device. I might do this and try again getting an update for ite it8211 ata/atapi controller driver - whatever that means usb install option involving ripping the disk into a iso image and then making a bootable usb stick.

Why on earth do i need to do this? Surely using a usb external dvd/cd device and putting into that the windows 7 upgrade disk will do the same job?More important what is an iso image? How do i create it? Why should i have to do this?This software has cost me gbp180. 00 when i bought it from currys retail store sheffield uk w/c jun 21st 2010, and i cannot get it to work. It is not at all satisfactory! I deliberately waited till now before buying to make sure a all the bugs were ironed out!

Obviously they are not!My pc was bought new from mesh in may 2009 and the build detail is:mesh desktop pc model xgs pii 955amd phenom ii x4 955 black quad core processor am3 3. 20ghz, 8mb cache ddr2/3asus m4a78-e mainboard amd 790gx hybrid crossfirex - am2+ phenom ii, ddr2- atx8192mb 800mhz dual channel ddr2 sdram2 x 750gb serial ata2 hard drive with 3mb buffer (1. 5tb) raid 0 configuration (stripe)samsung 22x dual layer dvd writer super format +r/-r/rw/ram this shows in device hardware as tsstcorp cddvdw sh-s223b scsi cdrom device.

The driver is located in c:windowssystem32driverscdrom.sys1gb ati hd4890 graphics accelerator hd 3300 gpu - hybrid crossfire xpcie gigabit lan controller featuring ai net 2 - asus m4a78 proi will also try to call microsoft support on 0844 800 2400 using access code 1233 when prompted. However, i wonder if anyone else who has had the same problem with a similar machine can advise how they sorted out the issue.


Posted On: 2010-06-25 . View Related Posts . . View 5 Replies .

Simpletech Pininfarina External Hard Drive Driver Not Found

I have a 500 gb simpletech pininfarina external hard drive, the product number on the back says bom no: 96300-41001-013. I just bought a new laptop with windows 7 and the laptop doesn't detect the hard drive. It says the driver could not be installed and i should try downloading the driver from the manufacturers website. The manufacturers website does not have the driver on there and i have a lot of my sensitive data stored on this external hard drive. Is there any way i can find the driver elsewhere? If someone has the driver or knows of a public forum where this driver is downloadable then please respond to my post.

Posted On: 2009-12-11 . View Related Posts . . View 2 Replies .

Usb Flash Drive Driver Install Failed / Not Recognized

I plugged in a flash drive to my laptop the other day and i got the plug and play message, it downloaded the driver but the installation failed. Now windows 7 will not even recognize that the flash drive is plugged in or try to install the driver again. The flash drive still works on my main computer just fine and other usb devices including other flash drivers work just fine on this laptop. Device manager and computer management under administrative tools do not register it as being plugged in either.

I could not find a way to check if maybe the driver did install and was corrupted. Is there anything i can do?


Posted On: 2010-03-22 . View Related Posts . . View 3 Replies .

Asus Drw 22b2s Cd/dvd Drive Driver Error

When installing windows 7, i have finally managed to get past the installation screen without it blue screening (that, however, is a whole different story) and now it stops before the installation begins, complaining that the cd driver can not be found. It then proceeds to look for the driver (on the cd drive, no less, proving to me that it must be working decently enough) and finds nothing. Browsing for more folders reveals nothing.

System info: i'm installing the 32-bit version from from a dvd onto an old machine with an 80gb hard drive and sufficient ram. The only dvd drive is an asus drw 22b2s cd/dvd drive, for which there are no drivers available online, nor did it need any to run on windows 2000 which was the previous os on the machine (however i've wiped the hard drive for the installation). The copy of windows 7 is a legit version, but still won't install. I've been browsing through other topics here and on different sites and none of their solutions work. Is there a way to get around this - or better yet, a solution?


Posted On: 2010-04-20 . View Related Posts . . View 2 Replies .

Setup Hangs - Required Cd/dvd Drive Device Driver Is Missing

Windows 7(ultimate) setup hangs: "a required cd/dvd drive device driver is missing. If you have a driver floppy disk, cd, dvd, or usb flash drive, please insert it now. " First my hardware i'm trying to get installed:

Gigabyte ga-ma790fxt-ud5p
4 wd5000aaks sata 500gb drives configured as raid5 connected to the sb750

When i start the setup, everything is fine until i hit "install now". Afterwards i'm delighted with 5-10 min. Of "setup is starting", which is followed by "a required cd/dvd drive device driver is missing. If you have a driver floppy disk, cd, dvd, or usb flash drive, please insert it now. "

After that i provide the "ahcix64s.sys" which is the proper sb750 raid driver.

I tried the versions from: http://america. Giga-byte.com/filelist/driver/motherboard_driver_raid_amd_sb7xx_bootdisk_win7-64bit.exe

And the one from amd: https://a248. E. Akamai.net/f/674/9206/0/www2. Ati.com/drivers/whql_sb7xx_raid_vista_3. 1. 1540. 127.zip

Both with the same result: "no device could be found. Make sure the driver files are correct and located on the driver installation media"

Just a side note: i'm installing from a usb flash drive, which has worked already, when i connect a single sata drive in ide mode to the gigabyte sata chip (jmb322); however this is not my desired config, i need to run the system from the raid.


Posted On: 2009-12-27 . View Related Posts . . View 2 Replies .

Code 52 Driver Error - Lg Cd/dvd Drive Won't Install

I recently got a new computer. I am using windows 7. When i got it a couple of weeks ago the cd dvd drive worked fine. I have and lg super multi dvd rewriter 22x model gh22ns40. When installing a western digital external hd, i contacted wd customer service and the technician had me change some things and since then my cd dvd drive will not work. When i go to computer, the cd dvd drive is not listed. When i go to devices and printers and click on the pc icon the hard ware list shows the cd dvd drive with a yellow exclamation mark. When i pull it up the message reads, "windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"

I uninstalled and reinstalled the drive with no success. I down loaded the current driver from wd with no success. I tried a system reset for a date when the drive was working, and that didn't work. I can't use the instillation software that came with the drive because the cd dvd drive doesn't work. I am sure that there is a switch or button some place that needs to be changed to for this function properly, but i can't find where it is.


Posted On: 2010-01-18 . View Related Posts . . View 3 Replies .