Advertisements:




Using Raid 1 Array Causes Win 7 To Crash


Using a raid 1 (2 disk intel storage matrix managed) array generated in windows xp causes windows 7 (64) bit to crash on startup. I have a windows xp pro 32 bit os and just installed windows 7 pro 64 bit in a dual boot mode. I originally created 3 raid 1 mirror volumes (2 identical 1tb drives) using the intel storage matrix manager v 6. 2 in windows xp.

When i connect these drives and boot into windows 7, i get a blue screen stop error when the os recognizes the drive and attempts to load the driver for it. The arrays still work fine in xp. How can i make these raid 1 arrays compatible with windows 7 64 bit?

Conversely, when i create a raid 1 array in windows & 64 bit using two 1 tb drives and the intel storage matrix manager v 8. 9, upon booting into windows xp i get the same blue screen crash after xp see's the drive and attempts to load the driver. I would like to make the arrays usable in either os, can this be done?


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Raid 0 Does Not Recognize Raid Array

I have a build with 7 ultimate running swimmingly for months with 2 single 1tb 7200 disks and one 128 gb ssd single. Yesterday, i successfully created a raid 0 array of 4x 60 gb ocz ssds in the gigabyte phoenix bios but they are not recognized as a usable array by 7ult. 7ult recognizes them  as an array in devices , everest recognizes them but after booting off the 128gb ssd they are not recognized in 'my computer", are not accessible, and generally are sitting there pretty, but useless.

My idea was to clone the 128 ssd to the array with acronis or paragon and use it as a super fast boot array? Any thoughts. Windows 7 ultimate and raid 0 setup after initial setup. 7 does not recognize raid array.


Posted On: 2010-06-03 . View Related Posts . . View 2 Replies .

Raid 10 Array Process

I'm switching from xp to win 7 pro 64bit - i previously set raid 10 so have experience. This was done using f6 floppy on clean install xp pro 32bit with intel ich9r driver. I am going to do a clean install with win7 pro 64bit - i have read that in win 7 you don't need to use the same process but i am unclear what exactly occurs in the install process for win 7 - will win 7 simply recognize and install the correct drivers - or do i need to have the intel 64 bit matrix drivers ready on flash drive etc. Please confirm the process?

Ps this is hardware raid not software


Posted On: 2010-06-04 . View Related Posts . . View 2 Replies .

Expand Raid 5 Array That Has Win 7

Can i expand a raid 5 array that has windows 7 on it? I am building a pc with a raid 5 array that will initially have 3/4 disks. The pc will be running windows 7 (probably home premium 64-bit).
What i want to know is can i expand the raid array that will have the system partition on without reinstalling the os. I may be wanting to do two things and i would like to know how to do them if possible, and without paying for a third party piece of software to do it.

The first is to add extra disks to the array and then expand the array and system partition to use it. Would this work and how is it done? The second is to add larger disks to the array? Again, would this work and how would it be done? I realize i would have to upgrade all the disks to make use of the extra capacity, but can i then expand the system partition into the extra space?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .

Win7 Will Not Recognize Raid 0 Array

I can not get windows 7 to recognize my raid array.
 
To begin, this is a fresh install on an asus m4a78td-v evo m/b, amd phenom ii x4 955 3200 mhz, 4 gbs ddr3 memory, 2 western digital 2 tb wd20eads-00s2b0 sata 3g, and a benq dw1625 dvd burner. Nothing is over clocked and using stock video and sound.
 
When i install with a raid 0, 128 kb stripe block, fast init on, gigabyte boundary off, cache mode write through, and no use of the drivers for the raid array for the mother board as windows 7 ultimate x64, i can get to the point of the first re-boot and get a message of: windows could not prepare the computer to boot into the next phase of installation. To install windows, restart the installation. If i restart, i get the same message.
 
Same setup, but this time i use the motherboard raid drivers downloaded from asus , ahcix64s. Inf, i get an error message of windows is unable to install to the selected location. Error: 0x80300001. So i partition the 3725. 9 gb raid to 1-100 mb system partition, 2047. 9 gb primary partition, and 1677. 9 gb unallocated and get the same message for each of the 3 drives as above. If i extend the 2nd partition of 2047. 9 gb, i get the message of: failed to extend the selected partition. [Error: 0x80042468].
 
Finally, if i delete the raid array and change the bios setting for the sata port 1-6 to ide, the install will complete, but without the raid 0 array. Please, what am i doing wrong or what do i need to get the raid 0 array? 


Posted On: 2010-02-18 . View Related Posts . . View 5 Replies .

Files Gone From Another Raid Hdd Array

Windows 7 upgrade torched all mp3's, documents, pictures files that were on another redundant raid hd array. Just did the vista - win7 upgrade. Made sure everything was securely backed up on my second hard drive - actually a mirrored 2 disk raid array, though on the same system. Kicking myself for not disconnecting the drives because after the install everything is gone! 150 gigs of mp3's, years of documents and photos, everything.

Two funny things:

1) the file structure is intact. Ie, i can click through folders, say e: -> music -> u2 -> joshua tree. But then i am greeted with an empty folder. The entire file structure remains but every folder is empty

Except .

2) bring up the disk's properties window and it shows that the space is being used. The files add up to around 230 gigs and the system shows this space as in use. Click properties on any individual folder, though - ie on my music - nil.

Things i tried:

Chkdsk - no errors. Various (free) file recovery programs - no deleted/corrupt files found to recover removed drives and installed into an external hd enclosure. Identical problem, both on the target system and on my laptop that is still running vista.


Posted On: 2010-02-16 . View Related Posts . . View 4 Replies .

System Reserved Partition On Raid Array

Raid problem:
Mother board: asus p5ql-e.
Disks:
Port 0 - 500 gb seagate system drive - non raid
Port 1 - 500 gb seagate drive - raid
Port 2 - 500 gb seagate drive - raid
Port 3 - 1tb western digital - non raid

The raid drives were set up in bios as raid 1 (mirrored), and windows 7 installed on the system drive. The intel matrix storage console was installed, and showed volume 0 as 100 gb and volume 1 as 465. 7 gb. I did not set up two volumes in the raid bios.computer management shows that disk 1 has a "system reserved" 100 mb healthy (system, active, primary partition), and 99. 90 gb unallocated. Disk 2 is 365. 76 gb unallocated.

My problem is that i can not use these two drives. It may be possible to set them as non raid (i have not tried this), since i bought them to use as raid 1. It seems obvious that i need to delete the "system reserved" partition, but have been unable to do so. Does anyone have any suggestions? If this partition must exist somewhere on the system, can it be moved to another drive?


Posted On: 2010-01-18 . View Related Posts . . View 4 Replies .

Unable To Enter Setup For Raid 1 Array

I am upgrading to a clean install of windows 7 ultimate 64bit from windows vista ultimate 64bit. I had the same hardware configuration with vista, just formatted the drives so i have a clean install. I had the drives set up in a raid 1 configuration in vista and want to to do the same in win 7.
 
I have the hard drives plugged into the sata 1 and 2 slots and the cd/dvd plugged into the sata 3 slot, just like i did in the vista install.
 
To install the new os, i set my drive configuration in the bios to raid. Using the intel raid manager i created an array called "programs" that used the full available space of both 500 gb drives. The array shows that it is normal and bootable after creating.
 
After creating the array, i return to the bios and check the boot priority. I have the cd/dvd set to #1 and the hdd array set to #2. I do not have a floppy so that is disabled in the legacy drive section so there is no third boot option.
 
The first attempt at installation, i put the win 7 dvd in at this point, saved the bios changes and exited. The install dvd boots and after going through the initial file load gives an error that an external storage device has been disconnected or is not functioning and i need to restart. I do not have any external devices connected at this time. In the vista setup i did have and esata drive connected through the port on the back of the pc. No esata connections have ever been used on the two internal connections.
 
I powered down the computer and then re-powered. It goes through the normal started, shows the healthy raid array in the intel raid screen, says that no jmicron drives detected and then goes to the ide detect screen. The timeout shows 35 then changes to boot ready as the dvd starts to spin. After 35 seconds elapse with no change, it gives an error that says "reboot and select proper boot devices or insert boot media in selected device and hit a key"
 
I remove the dvd, replace it in the drive and hit a key and get the same error.
 
I tried the process with the vista dvd and get the same result.
 
Next i deleted the raid array and remade it and tried again with the same result.
 
Next i set the cd/dvd as the only boot device with the same result. I also tried hitting f8 during start-up to select the boot device and chose the cd/dvd and got the same result.
 
Finally, i deleted the raid array, changed the drive configuration to ide and tried the install on a single drive. That worked with no problems. The os installed and runs perfectly but i really want the os to be installed on a raid 1 array for redundancy.
 
I appreciate any help you can offer to resolve the issue and get the os installed on a raid 1 array.


Posted On: 2010-03-11 . View Related Posts . . View 2 Replies .

Rebuild Raid 1 Array Without Erasing Data On Drives

Possible to rebuild raid 1 array in windows 7 without erasing data on drives? (Want system independent raid 1 array). I would like to build a raid 1 array that can be migrated to future systems without having the data destroyed. To clarify, now i have an intel/win 7 computer. Perhaps my next system will be amd/win 8.

I don't mind being "locked in" to windows as i don't see myself changing to linux or os x, but i want the freedom to buy any hardware (not be locked in to say, intel chip-sets), upgrade to new versions of windows and keep my raid 1 array with data intact. If i create a raid 1 array in windows 7 (under computer management -> disk management for example) can i recreate that array under windows again in the future (fresh windows install) without windows formatting those drives and losing my data on them?


Posted On: 2009-12-22 . View Related Posts . . View 3 Replies .

Cannot Create Partition And Format Hdd In Raid 0 Array

I run on an msi p6n sli platinum motherboard. I have been trying for the past 4 hours to install windows 7 ultimate, but cannot figure out how to get it to work in a raid 0 configuration. I"ve download all of the sata raid drivers for my motherboard and tried loading them, but it doesn't work. The only thing that gives me any kind of reaction is when i load the xp64-bit drivers. It makes my hard-drive disappear and i have to restart the windows setup. What can i do?! This is driving
Me crazy


Posted On: 2010-04-18 . View Related Posts . . View 2 Replies .

Setup Raid Array Delete All Files On Old Drive

I added a new drive and set up a raid array. This deleted all the information on my old drive. I already performed a clean install of windows 7 home premium on the new array. Now i cannot use my product key because i have the upgrade disc. Is there a way for me to input the keys to my older versions of windows so i can use the upgrade key? If i call microsoft, will they activate my windows if i provide them my vista key? I am trying to prevent installing the entire os again.

Posted On: 2010-07-19 . View Related Posts . . View 3 Replies .

Upgrade To Win7 On Ssd When Vista Installed On Raid 0 Array

Best way to upgrade to windows 7(64-bit) on new ssd when vista(32-bit) installed on raid 0 hard-disk array. I have a full copy of windows vista (32-bit) installed on a raid 0 array on a pair of wd 74 gb disks as my c: drive (also have a pair 500gb wd in a raid 1 array as well). I have just purchased windows 7 (64-bit) and a new intel 160gb ssd and want to upgrade to windows 7 on the ssd.

Btw i also have a full suit of adobe photoshop (cs4), lightroom (version 2), photoshop and premiere elements and on-one's plug-in suite 5 installed on the c: drive as well and would like to have them operational after upgrading to windows 7.


Posted On: 2010-05-29 . View Related Posts . . View 2 Replies .

Remove Drive From Raid / Change Sata Mode From Raid To Ahci

Remove a drive from raid then change sata mode from raid to ahci, situation: i have 3 physical hdds: 1 ssd and 2 identical mechanical drives. The ssd stores the win 7 x64 pro installation while the mechanical drives, in raid 1, store data. The sata mode is set to raid at the moment. I want to remove a mechanical hard drive, thus, breaking the raid. Using the intel raid manager interface, i think i will still have all the data on the 2 mechanical hard drives.

Then, i will want to change the sata mode to ahci (1) because i will no longer have a raid (2) i want to enable trim for my ssd. Questions: how will changing sata mode to ahci affect my os installation? Should i change the mode before or after i remove a raid member? Will i have to reinstall windows?


Posted On: 2010-06-19 . View Related Posts . . View 2 Replies .

Driver Issue With Scsi Drive Array

Upgrading from vista sp2 to windows 7 home premium. Installation won't proceed due to driver issue with scsi drive array. I cannot proceed with the installation. The installation error message tells me. For these items, make the following changes:

Install updated drivers for the following devices. Open control panel and search for "update device drivers". Disk drives: compaq scsi drive array. I have a hp 1719n desktop computer. I updated the bios. I have gone to the device manager and that item is not that there. There are no drivers with anything like that for a description. Any suggestions?


Posted On: 2009-10-25 . View Related Posts . . View 6 Replies .

Copy Raid Drive To Another Raid Drive

I've been running 2 seagate barracuda 500 gig hdd in raid1. I recently purchased 2 wd cavier green 2tb hdd that i want to run in raid5. I have backed up all my information from my existing drive to my external and create the back up boot cd. When i go to restore the information to the new raid array i get a error message (think it was 0x80042414). I tried then to just reinstall windows 7. Problem 2 happens. It will see the 3. 6tb hdd and will partition only 2tb of the disk space even though it was specified for 3. 6tb. Even still with the 2tb drive the install fails (don't have the error code).
How can i get the drive copied to my new array?


Posted On: 2010-05-16 . View Related Posts . . View 10 Replies .

Crash Down

I have installed windows 7 pro and it worked fine. My main-board died so i changed it. I didn't reinstall windows, but had to install a graphic card (sapphire radeon hd 5760) the system crashes down at least 7 times in 4 hours every day. I get a blue screen, with the info about hardware that is not properly installed. What should i do?

Since i changed the mainboard, i keep getting the message that the wind7-key is not active. When trying to activate it, it tells me that i can't. What should i do?


Posted On: 2010-04-07 . View Related Posts . . View 11 Replies .

Ie 8 Seems Always To Crash

I have been using windows 7 since it's release and previously the rc1. I use the 64 bit flavor and have been constantly running into problems with ie8. It seems always to crash when i click on the following page of an article i.e extremetech.com or bbc.co.uk. It keeps hanging or crashing and i have never had so many crashes since i was using active desktop with ie4. It really is so annoying that i have even installed firefox to try and see if it has come from the site itself. I regularly update and also system clean-up , and i floss regularly too. Any known bugs or fixes or should i re-install ie8 ( if at all possible) i am also using f-sucure internet security 2010 and the other pc's in my home experience no such problem.

Posted On: 2010-01-31 . View Related Posts . . View 4 Replies .

Program Crash

I have recently purchased a new dell vostro 1220 laptop with windows 7 home prem installed. I also have a web design package known as incomedia website x5 evolution installed, the problem is it doesn't seem to want to operate under windows 7. The program crashes frequently and the only information i have as to why is listed below. I have tried the following:

-Uninstalling and re-installing (as administrator)
-Setting compatibility mode as windows vista
-Uninstalling again (and deleting the actual program directory from the programs folder)
-Re-installing the software again and installing the latest update for it

It still will not work, i have also submitted this question to the manufacturers of the software, incomedia, but thought i would also ask here too just in case someone has a quick and easy answer to sort this out.

Faulting application name: website.exe, version: 8. 0. 0. 11, time stamp: 0x4afd3831
Faulting module name: unknown, version: 0. 0. 0. 0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x003987a2
Faulting process id: 0x1088
Faulting application start time: 0x01cab79e475c94a4
Faulting application path: c:program fileswebsite x5 v8 - evolutionwebsite.exe
Faulting module path: unknown
Report id: 8b1546e8-2391-11df-97bc-904ce5cd46c5


Posted On: 2010-02-27 . View Related Posts . . View 2 Replies .

Sidebar Crash

I have windows 7 64 bit ultimate, and started having a weird problem, with sidebar as started crashing and even my desktop has rebooted by itself after a blue screen. In reliability, i found the following;

Description

Problem signature

Extra information about the problem

Bucket id: 14338412
In fact, i have several gadgets, 1st stop happened once yesterday, then following a suggestion from windows media center to install a gadget for canal+ (french television), 5 minutes later i had the incident and reboot.

Problem event name: appcrash
Application name: sidebar.exe
Application version: 6. 1. 7600. 16385
Application timestamp: 4a5bc9e1
Fault module name: stackhash_21d6
Fault module version: 6. 1. 7600. 16385
Fault module timestamp: 4a5be02b
Exception code: c0000374
Exception offset: 00000000000c6cd2
Os version: 6. 1. 7600. 2. 0. 0. 256. 1
Locale id: 1036
Additional information 1: 21d6
Additional information 2: 21d682fe223a25376425c7a2d09f0da6
Additional information 3: faf7
Additional information 4: faf7aeebadce84904572db18cc047304

Faulting application path: c:program fileswindows sidebarsidebar.exe


Posted On: 2010-05-14 . View Related Posts . . View 12 Replies .

Explorer Crash

Problem with windows explorer, recently my display freezes and i will get the following error and i have to restart windows explorer  description: a problem caused this program to stop interacting with windows.

Problem signature: problem event name: apphangb1 application name: explorer.exe 
Application version: 6. 1. 7600. 16385  application timestamp: 4a5bc60d  
Hang signature: 7b67  
Hang type: 16897  
Os version: 6. 1. 7600. 2. 0. 0. 256. 1  
Locale id: 1033  
Additional hang signature 1: 7b676df8497201f45c40dc23ba67f84a  
Additional hang signature 2: 9e90  
Additional hang signature 3: 9e90249be26e35facd61ba097c4e9b58  
Additional hang signature 4: 4c4a  
Additional hang signature 5: 4c4ad7529a34983b6293625c48169922  
Additional hang signature 6: 4c4a  
Additional hang signature 7: 4c4ad7529a34983b6293625c48169922


Posted On: 2010-07-20 . View Related Posts . . View 3 Replies .

Sound Causes Programs To Crash

I got my laptop last october and installed windows 7 professional right after it came out. Since maybe december, i have been having sporadic problems where programs hang when they are supposed to have sound. I open a video in windows media player, it crashes. I play a video on youtube, my browser crashes. Even if i try to adjust the volume, volume mixer crashes. It seems to happen only when i switch sound output, like when i plug in my headphones. Restarting windows usually fixes this, which is why i didn't bother asking for help before. Just now i restarted three times with no luck, and i'm fed up. Any ideas on where the problem is coming from?

Posted On: 2010-03-19 . View Related Posts . . View 2 Replies .

Service Pack Crash

This past friday after a microsoft automatic update of service pack (3?) My computer (dell/windows vista) failed to reboot past the welcome screen. For some reason the back up on my computer never worked. I called dell, after five hours and a lot of aggravation from the technician and really
Hard sells for security and the "great deal" for a $249 dell on call contract, everything was lost, including my mailbox. He took the firefox logo and put it on internet explorer and said everything had been saved. Actually some default pics from windows (i use picasa) and documents were saved.

I realize that life is temporary, but why does this have to be so aggravating. Firefox (3. 5. 2) is incompatible w/ windows. It crashes endlessly, especially w/ vids, popups, etc. The box that shows the firefox exe 'lsp' patch, socket error, w/ the abort, retry, ignore - retry is an automatic crash. What can be done about this mess?


Posted On: 2009-08-11 . View Related Posts . . View 6 Replies .

Nvidia Drivers Crash On Win7

I recently bought an amilo notebook pi 3540. I installed windows 7 professional on it but my the drivers of my nvidia geforce 9300m gs keeps crashing. The screen flickers whole the time and eventually it will completely crash (blue-screen error). I tried reinstalling windows 7 but that didn't help.

Now i installed windows 7 ultimate but it still crashes. This time however my screen won't flicker and there won't be a blue-screen error. The screen just goes blank and the system restarts. When i searched for the problem i found this analysis:

On wed 21/10/2009 9:00:43 your computer crashed
This was likely caused by the following module: nvlddmkm.sys
Bugcheck code: 0x116 (0xfffffa8006e054e0, 0xfffff880048fe490, 0x0, 0x2)
Error: video_tdr_error
File path: c:windowssystem32driversvlddmkm.sys
Product: nvidia windows kernel mode driver, version 186. 91
Company: nvidia corporation
Description: nvidia windows kernel mode driver, version 186. 91

Does anyone know how to fix this problem?


Posted On: 2009-10-24 . View Related Posts . . View 10 Replies .

4gb Of Ram Causes Computer To Crash

When i try to use 4gb of ram in my computer, it crashes, either it will crash then load up fine the 2nd time around or it will crash constantly and give me a bsod. The motherboard should be able to handle up to 8gb of ram so i don't get why this is happening. It's an asrock n68-gs motherboard, with a 1. 5 tb hard drive, windows 7.

Posted On: 2010-03-21 . View Related Posts . . View 6 Replies .

Win 7 Crash - Screen Is Frozen

I just recently installed windows 7 on my computer. The first 2 days it worked just fine with no problem. I hadn't installed any new programs and things where running smooth. I get up on about the second day and my screen is frozen solid. I turn it off and back on and it will no longer load.

It starts up and shows a screen with some options on booting and a system recovery. After that it normally starts to load windows. Instead it gots to a black screen with a typing cursor in the top left corner and it flashes a few times. After that it goes away and the screen stays black and will not do anything else. I have tried everything under the sun to recover the system and starting up with the disk but non of it works. Does anyone know what the problem might be?


Posted On: 2009-12-27 . View Related Posts . . View 2 Replies .

Win 7 Crash - Bccode: 101

I have windows 7 pro 32bit on my pc and when i first open my pc and open a game after a while sound distorts , followed up by extreme lag and then bsod. I get the following:

Bccode: 101
Bcp1: 00000019
Bcp2: 00000000
Bcp3: 8d136120
Bcp4: 00000003

I got asus rampage 2 gene(most recent bios) , intel core i7 920, 3gb ocz i7 edition memory at 1066mhz, gigabyte 4870x2, microsoft sidewinder x6 keyboard, microsoft sidewinder x8 mouse and 2x seagate 320gb , 800w psu. Updated all drivers, checked for firmware for hdds( no new firm from seagate) upgraded firm on dvd player.
 
Example: i turn on my pc, i run world of warcraft, i play for like 5 mins, sound distorts game lags and then bsod. After i restart i run game again and i play fine, till i shut it down for a couple of hours and then same thing again.


Posted On: 2009-12-10 . View Related Posts . . View 2 Replies .

Applications Crash When Go To File / Open

The issue started with office 2010. Go to file/open and the application crashes. Excel has stopped working, search online for a solution, or close the program. The issue has now expanded. I cannot attach a file to my email. App crashes. Same thing happens on file save as. I can open a file from explorer. Double click on a file and all is well. File/save works. The problem can be resolved by deleting the user, and re-creating it. But it does not take long for the problem to reappear. I have not been able to identify a specific activity that triggers the issue. Looking forward to a resolution.

Posted On: 2010-05-30 . View Related Posts . . View 16 Replies .

Live Mail Crash On Send

This morning, on the fifth day after installation of windows 7 and windows essentials, windows live mail has crashed every time i try to use it. Upon clicking new email, the message "unable to create this stationery" comes up. Upon clicking ok, the new email window comes up. I can enter the to: contact and write the email, but as soon as i click "send", the message "windows live mail has stopped working - checking on line for a solution" comes up and the program eventually closes.

Posted On: 2010-04-15 . View Related Posts . . View 2 Replies .

Upgrade After Hard Disk Crash

Purchased upgrade directly from microsoft was one of the first to receive it. Installed it successfully last fall. Had a hard drive crash (seagate firmware problem) and my backup drive did not recover operating system (also seagate, 0 for 2). Had to reinstall vista using recovery disks. Now i can't load windows 7 upgrade, does not get past compatibility check.compatibility report on my desktop was empty. Downloaded and ran the windows 7 compatibility software. It said that i was good to go for the upgrade. Tried to reinstall windows 7, did not get past compatibility check.

Posted On: 2010-02-03 . View Related Posts . . View 4 Replies .

Memory Parity Error Crash

I have a gateway w350i which i upgraded to windows 7a few months ago and it has been running smoothly up until about a week or two ago. One day a got a blue screen that said "memory parity error -  system halted - contact your hardware manufacturer" and so on. I restarted it and it worked fine until the next day i got the same message while using it.

Since then every time i restarted, it would crash and get this message either at the login screen or a few seconds after logging in. I read a different forum (on my desktop) that said to check each memory module so i tried swapping them out with some other memory i had but got the same problem.

I switched them back and was able to load windows and the internet in safe mode with networking and am able to type this message now on it without crashing. However i want to be able to use the laptop in regular mode because i cant run most other programs and the screen resolution cant be changed to normal either. Does anybody know what could be causing this that doesn't occur
In safe mode w/ net?

The only thing i have done changed in the past few weeks to the system is installing windows movie maker and the other things that i had to install with it. I thought it might be the problem somehow but i cant uninstall it in safe mode. It will load the add/remove screen but it says windows installer cannot be loaded if i actually try to uninstall it.


Posted On: 2010-04-30 . View Related Posts . . View 2 Replies .