Advertisements:




Usb To Ata / Atapi Bridge Installation Fail


Recently i got a new pc with windows 7 64x. I have an external hdd that windows 7 recognized it until today. I had some issues with the hdd, but managed to work around them:at first when i started my computer it wouldn't get passed the initial screen (the one with the logo and press f2 for bios, f12 for boot setup). If i would unplug my hdd it would unfreeze. So i figured that maybe the computer was looking for a boot from the external hdd and so i change the primary boot to the cd. And it all worked great for a couple of days.

Then it started again with the freezing at the initial screen, so i would have to unplug the hdd. And then even though the hdd was plugged back it wasn't listed in my computer. So normally i would go and uninstall usb mass storage from device manager and to a restart with the hdd plugged in. And that used to work. But today, faced with the same problem, i tried everything i could think of and nothing worked.

I uninstalled usb mass storage from device manager and also usb drive from disk drives, unplugged it and plugged it back. Most of the time it would say that the driver installation failed, but even when it would install still i couldn't see it on my computer. I did multiple restarts. I noticed that if i uninstall both the usb and usb drive and then restart, at the restart i get a different message when installing the driver: "usb to ata/atapi bridge", but it ends up with a failed error. What should i do to fix this?


View Full Post With 3 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Usb / Rs232 Bridge Gives Blue Screen

Usb/rs232 bridge gives bsod. I have a rs232/usb bridge with prolific drivers that worked fine in xp sp3. It now gives me the blue screen of death after about 3-5 minutes when run as admin. If i run in regular user mode then it locks my software up after nor more than 5 minutes. I then purchased a new bridge that uses ftdi drivers but it still locks up.

No more bsod either as admin or user but locks the program up. This is the text from windows. Problem signature: problem event name: bluescreen os version: 6. 1. 7600. 2. 0. 0. 768. 3 locale id: 1033 additional information about the problem: bccode: d1 bcp1: 0000000000000038 bcp2: 0000000000000002 
Bcp3: 0000000000000001 bcp4: fffff88000f000d0 os version: 6_1_7600 service pack: 0_0 product: 768_1 files that help describe the problem: c:windowsminidump


Posted On: 2010-07-26 . View Related Posts . . View 3 Replies .

Usb 2.0 Irda Bridge Driver Problem With Upgrade

Windows 7 upgrade issue, upgrade advisor will not allow install until usb 2. 0 irda bridge driver is upgraded. Windows 7 upgrade advisor gives me the following when i try to upgrade to windows 7. This does not show up in my device manager and i cannot find it in the control panel as well. I am running a gateway laptop t-6330u with vista and i am trying to upgrade to windows 7. What can be done here, i am pretty much at the end of my rope with this and am ready to refund the product and keep vista.

The following issues are preventing windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. Windows needs to be restarted so necessary changes to system files can be made before continuing. Upgrading windows will affect the following devices and/or programs:

These devices might not work properly after the upgrade. Before upgrading, we recommend updating the drivers for these devices. Cancel the upgrade, open control panel and search for "update device drivers", or go to the device manufacturer's website to search for updated drivers.

Infrared devices: usb 2. 0 irda bridge


Posted On: 2009-12-03 . View Related Posts . . View 2 Replies .

Usb Connected Printer Causes Other Usb Devices To Fail

Operating system - windows 7 professionalprinter - canon multifunction mp530the printer is listed as windows 7 compatible and i have installed the latest drivers on the canon site. The printer installed correctly and all its functions work correctly. When i connect the printer to my machine and power it on the other 7 usb ports fail to operate correctly.

I cannot read a flash drive and my usb connected card reader does not function. If the pc is loaded with the printer switched off then all the other usb ports function correctly while the printer is switched off. If i then switch the printer on i can print ok but cannot use any of the other usb devices until i restart with the printer switched off. In device manager the printer is shown as working ok but the card reader is shown as "device cannot start".

Driver details usb host controller - provider = intel, date = 13/09/2006, version = 8. 2. 0. 1008driver details usb hub - provider = microsoft, date = 21/06/2006, version = 6. 1. 7600. 16385any ideas?


Posted On: 2010-06-02 . View Related Posts . . View 4 Replies .

Copy From Ata / Ide To Hdd With Ide To Usb Cable

I am trying to transfer files from an old hard drive (xp, ata/ide drive) to my win 7 machine (w7 pro, dell laptop). I only have the hdd from the xp machine, so i cannot go in and have the user share all files, etc. I do have an ide to usb cable and a means to hook up the drive to a power source. While i was able to copy some files (music, etc. ), The actual documents (drive:documents and settings user-name) are protected. I know the password but i am not given the opportunity to enter it.

When i click on the directory, it says: you don't currently have permission to access this folder. Click continue to permanently get access to this folder. So i click continue and the address bar takes forever to load but nothing comes up. No prompt for pwd, nothing. Any ideas?


Posted On: 2009-11-09 . View Related Posts . . View 2 Replies .

Usb, Lan, Ps2 Devices Fail At Startup

To put this very briefly, at the bios screen, they all work fine. Lan registers, keyboard and mouse are powered and functioning. However, upon reaching the boot screen with the "starting windows" title, the mouse and keyboard power down and do not react at all despite replugging. Tried with alternate ps2 keyboard and mouse. Lan also stops functioning. Any help on this topic would be greatly appreciated. P. S. I'm going to try last known good configuration, but i doubt it would work edit: oh and i'm on 64-bit ultimate. Edit 2: yep. Didn't work. Also, safe mode produces identical results (everything fails to function)

Posted On: 2010-05-23 . View Related Posts . . View 7 Replies .

Usb Mass Storage Class Devices Fail To Install

I'm having problems plugging usb mass storage devices into my pc (it's a dell xps8100 for what that's worth). Existing usb storage devices in that class (e.g. I had been using them on this particular system for a while) work fine. I have an ipod 5th gen, which  is a usb hard disk from windows' point of view, and it's fine. So are a few sata hard drives that i put into vantec usb housings, as are memory keys i've already used and cf/sd card readers. But. Devices that are brand new to this system. Nope. I have observed the behavior with a (very old) ipod nano 1g, several run of the mill usb keys, and another ide hard drive in a venus ds9 enclosure. All of the above use generic drivers - e.g. Disk.sys, partmgr.sys. When i plug them in, the balloon comes up.

Installing drivers. And then it gives me the dreaded red x. Driver not installed. If i go into device manger and have a look, i always see the failed device as a root device. And usually with an identifier i have not seen before. For example, if i plug in the venus ds9-housed hard disk, a root node appears called "other devices || usb2. 0 storage device" (written exactly like that) with a yellow triangle (driver not installed). With the ipod nano. "Other devices || ipod" and same yellow triangle. Always code 28 (driver not installed) now i decided to get cute and go update driver || browse my computer. And try searching windowssystem32.

It still fails, and reports the following: windows found driver software for your device but encountered an error while attempting to install it. Usb mass storage device (imagine a usb icon to the left of that)the system cannot find the file specified. Since the "file" is disk.sys, it must be there, otherwise windows would not even boot. S i said, this will also happen with usb memory keys. One more data point, vmware workstation is installed on this system.

If i have a vm running and plug in any usb storage device, it will be installed/connected to the guest os (normal vmware behavior). Under vms, the devices that don't work in the host, work fine in the guests! So it is not a hardware problem, it's something in my particular windows 7 installation that is wrong somehow. (Vms i tested were win 7 x86, winxp mce, and w2k8. Works fine in all/any of them)so. I've exhausted just about every path i can think of. Nukeing windows and reinstalling is not a viable option for me. Nyone seen similar/have any ideas as to what i can try next?


Posted On: 2010-07-28 . View Related Posts . . View 13 Replies .

Aero Crashes On Using Adobe Bridge From Taskbar

I built my machine 6 months ago. I use adobe cs4 and use bridge for my raw pictures conversions. With bridge in the taskbar perhaps 50% of the time when i open bridge using the taskbar aero crashes. I can use bridge ok and the pc works ok except for aero. Closing bridge aero stays crashed. However, if i right click bridge in the taskbar and then select exit bridge, aero recovers and the pc is fine. Ll windows, adobe, mband nvidia gtx260 drivers are up to date. I'm running win 7 64bit ultimate, 12 gb ram, i7 920 cpu, asus p6t-se mb. I have a 128gb ssd with 75 gb free. I use a 64gb ssd as my swap file drive for win 7 and adobe. I have4 x 1gb samsung hd in a raid 1+0 configuration onboard. I also have a wd 4 gb sharepace nas. Backups are all running fine.

I have taken a system image after a clean install of all programs and settings. Occasionally i have brought the image back after being a bit sus about a couple of suspicious files i was sent. Much easier to bring the image back i think than mess around not trusting the system security. I have had this problem intermittently since being built. I have checked for incompatibilities with various programs but the only constant is that this only occurs with bridge as i say around 50% of the time. After months of trying to sus this myself i am hoping there's someone here who can assist. I run trend micro internet security pro as my antivirus. I've looked on both the ms and adobe sites with no luck as to what causes this. Just one more thing. I have installed no games on this pc so that rules out a gaming problem.


Posted On: 2010-08-18 . View Related Posts . . View 4 Replies .

Error Using Dvd Burner - Atapi Dvd Drives Listed As Scsi Devices

My atapi dvd drives (dvd rom and dvd rw) and sata hard drive are listed as scsi devices in device manager. Why is that, and is it a problem? I have frequent error when i use the dvd burner.

Posted On: 2009-12-06 . View Related Posts . . View 2 Replies .

Optiarc Bd Rom Ata Device Not Recognized

I have optiarc bd rom bc-5500s ata device, dvd/cd rom drive, it is not recognized, the error is this device cannot start. (Code 10)i have also noticed that the usb device i use is being substituted and recognized as the dvd/cd rom drive, once i remove the usb device , the drive disappears but once i plug the usb device in both devices appear under cd-rom drives, the usb is working properly but dvd/cd rom drive has an exclamation mark!I have tried to edit the registry to remove and re-install the cd drive but i am not allowed to delete the registry keys.

Posted On: 2010-08-08 . View Related Posts . . View 3 Replies .

Hl-dt-st Dvdram Gsa-t20l Ata Device Code 10

My cd drive has disappeared from explorer after a printer re-install. The driver is apparently installed correctly, but has no address. Cds and dvds do not play either. I have recently updated from vista to w7, but i think i have used the cd drive since the update. Any ideas?

Posted On: 2010-04-02 . View Related Posts . . View 2 Replies .

Hp Dvd Rw Ad-7561s Ata Device Driver Corrupted Or Missing

Using compaq presario cq40-627tu notebook pc. Notebook cannot detect my optical device. Can be ejected without problem but cannot be detected by computer. Only hard disk partition and usb storage, if connected, are shown in computer. Device manager and bios detected it as "hp dvd rw ad-7561s ata device". This problem exist from the first time i use this notebook.
 
Effort made:
Update windows 7 ultimate 32-bit from basic update to any critical update available (all windows update had been applied). Last updated was on 22/03/2010 11:41pm +8. 00gmt kuala lumpur. Download all compact software and driver from compaq presario cq40-627tu notebook pc page on www.compaq.com but still cannot be solved after running health analysis from hp support assistant.

Had use any applicable driver scanner software but still cannot be solved. Had been cleaned up by tuneup utilities from http://www.Tune-up.com/ and hp tuneup from hp support assistant but still no changes. Had update the driver manually and automatically from the system and the internet but still no use.

Description:
This unit or notebook has not functioned properly since the first use (optical drive only). Had been send to the nearest computer services for re-cabling and services but still no changes. Here are the information from the devices manager after all effort had been made.

Hp dvd rw ad-7561s ata device property
Device type : dvd/cd rom drives
Manufacturer : (standard cd-rom drives)
Location : location 0 (channel 4, target 0, lun 0)
Device status : windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39)


Posted On: 2010-03-22 . View Related Posts . . View 3 Replies .

Hl-dt-st Dvdram Gsa-t20n Ata Device Cd/dvd Drivers

I have recently upgraded from windows vista home premium to windows 7, the problem i am having is that my cd/dvd is no longer recognized by my laptop, oh yes i have an acer aspire 5720 laptop. There is now nothing showing when i open "my computer" just the hard disk drive info.

I have gone through this forum to see similar problems and even carried out the repair advice given but all to no avail, including uninstall and reboot and now its saying "device driver software was not successfully installed" please consult device manufacturer.

Well for one i don't know who the manufacturer is, and two it came with the laptop from acer so if they are the manufacturer which i doubt then which driver do i download from their site

Please can someone offer any other advice mainly:-

1/ who is the manufacturer of this device and can i download the driver from them

2/ since installing windows 7 why doesn't my laptop recognize the device

Also does anyone know why i have showing in my device manager: 2 x mobile intel (r) 965 express chips. 8. 15. 10. 1912 09/112009, i have given below the name of my cd/dvd. Here is the cd/dvd  make: hl-dt-st dvdram gsa-t20n ata device


Posted On: 2010-01-09 . View Related Posts . . View 3 Replies .

Ati 4379 Serial Ata Controller Driver Update Error

Windows update continually tries to update a driver provided by silicon image storage for ati 4379 serial ata controller. Once i got an error code 80070436. Each time the update tries, it fails. I tried to update the driver from the device mgr. In the control panel, but after searching, a message of 'you have the latest driver installed' appears! I also removed the update from the list in windows update. When i power up the computer, windows tries again to install the driver which i then cancel & again remove from the update list! 

I think this situation may have caused an earlier problem wherein vista wouldn't boot & i had to do a system restore. After my last restore (a few days ago) i started canceling the attempted update & my system now seems to boot up ok. How do i get rid of the attempted update?


Posted On: 2010-01-05 . View Related Posts . . View 4 Replies .

Drivers Fail To Load

The driver failed to load for the device - ''ubhelper.sys'' ''pxhlpa64.sys'' ''ntidrvr.sys''
Packardbell mybackup - failed to write to dvd/cd - another driver issue_ ntidrvr.sys
How can i update these drivers? Or get a valid digital signature? Or failing that- how allow certain drivers to run even tho signature/certificate out of date?


Posted On: 2010-04-18 . View Related Posts . . View 2 Replies .

Windows Updates Fail

The following updates fail to install on my computer. I am running windows vista home edition x64 on an hp pavilion dv7 laptop.

Update for windows vista for x64-based systems (kb980248)
Security update for microsoft office excel 2007 (kb978382)
Security update for microsoft office outlook 2007 (kb972363)
Security update for microsoft office publisher 2007 (kb980470)
Security update for microsoft office visio viewer 2007 (kb973709)
Security update for the 2007 microsoft office system (kb972581)
Security update for the 2007 microsoft office system (kb974234)
Security update for the 2007 microsoft office system (kb978380)
Update for microsoft office infopath 2007 (kb976416)
Update for microsoft office onenote 2007 (kb980729)
Update for microsoft office outlook 2007 junk email filter (kb981433)
Update for microsoft office word 2007 (kb974561)
Update for the 2007 microsoft office system (kb981715)


Posted On: 2010-04-29 . View Related Posts . . View 2 Replies .

Security Updates Fail

This is so ridiculous. I've been getting a blue screen for a long time now. The updates don't want to install. Took it to geek squad, only for them to tell me it's infected and that i would have to do a restore. That would cost 130 dollars. They are about as useful as a burning bag of. Anyway, i get failures every single time i try to download updates. It's not the kb number that people are referencing. It is a different number every time. I can't copy all of the errors because it won't let me, and i don't want to type it all out.

But, a couple of them are error code: code 80200010, kb 959130 and 973768. Those are two of a million. I have restored my computer to factory settings. The only things on it are windows files, avg and itunes (with no music on it). I was told i could reinstall my operating system, but when i put the disc in, to uninstall and reinstall a clean version of vista, it does nothing. The disc doesn't read at all, and in fact, it just got stuck in there and i can't get it out.

The disc sounds like it fires up for a moment, then nothing. When i go into computer, then click on the disc drive, it tells me to insert a disc, then kicks mine out. Other discs work fine. Can someone please shed some light. The geek squad is a rip-off. Don't ever buy a warranty from best buy. It does absolutely nothing for you. You just waste your money.


Posted On: 2010-04-08 . View Related Posts . . View 6 Replies .

Updates For Ms Office Always Fail

The following updates continuously fail. Nothing i do seems to get them to install. Please help. This has been happening since may.

Security update for the 2007 ms office system (kb982312)

Sec. Upd. For ms office excel 2007 ( kb982308)
Sec. Upd. For ms office infopath 2007 (kb979441)
Sec. Upd. For ms office powerpoint 2007 (kb982158)
Sec. Upd. For ms office access 2007 (kb799440)
Sec. Upd. For ms office word 2007 (kb982135)

Security update for the 2007 ms office system (kb982331)
Update for ms office outlook 2007 junk email filter (kb2202131)


Posted On: 2010-07-25 . View Related Posts . . View 2 Replies .

Fail To Start After Update

I just installed the sp1 update for my computer for windows vista premium home ed. Everything installed with no problems, but when i rebooted my pc, windows wouldn't start. The only thing thats displaying is a black screen with windows error recovery across the top, then it states "windows fail to start. A recent hardware or software change might be the cause". I tried rebooting it in different modes but nothing. Then it says i should insert my os disk to try repairing it but thats not even starting. Is anyone else having this problem? This happened right after i installed the update.

Posted On: 2010-01-28 . View Related Posts . . View 3 Replies .

Bsod - Memory_management, Overclocking Fail

So i finished setting up my new custom computer with these items, p5p43td motherboard
4x2 ocz ddr3 pc3
Intel core 2 quad q8400
Windows 7 home premium x64
Geforce gtx 275 oc
 
So here is my problem. Every time i put all of my ram sticks in my motherboard, i always get the memory_management bsod randomly as i do any normal apps. I also sometimes get an over-clocking fail when i boot my computer ( i did not do any overclocking) and now i get this irql_not_less_or_equal bsod. At first, i thought it could be the ram since it was saying memory management and when i insert only 3 sticks everything is running fine.

After running the windows experience index, my 3d business and gaming performance was rated at 2. 0. The performance test also revealed very low fps in 3d graphics. I also have to add that i try every possible combinations with my ram slots and everything is working fine. I tried reinstalling the latest driver and now i get a 7-zip:data error.

So now im pretty desperate. I searched everywhere on google. Do i need to return the card to nvidia or is there a solution to this problem. Is the video card overclocked in some way that it goes in conflict with the ram? If so, where can i access the parameters to change the oc of the card.


Posted On: 2010-05-17 . View Related Posts . . View 4 Replies .

Program Upgrades And Installs Fail

I can install new programs but upgrades or reinstalls of programs i have previously used fail. The installation would not even start and the problem has occurred with random applications. Example: itunes, avira, skype (although i was able to install a really really old version of skype), driver updates. I have tried changing compatibility (as long as it allows me), run as administrator, even changed permissions b/c some failed installations would suggest this is the problem. Any suggestion is more than welcome!

Posted On: 2010-03-25 . View Related Posts . . View 4 Replies .

New User Accounts Fail Logon

I cannot get any new accounts that i set up to log in, they fail with the following message. "User profile service failed the logon. User profile cannot be loaded. "Happens with either new admin or standard accounts, my current admin and standard accounts still function. I got out my windows 7 (professional) disc and ran an "upgrade" hoping this would correct whichever file appears to be corrupted, but the issue still remains. I am trying to find a solution that does not involve a new or reformatted hard drive and complete reinstallation, but not to hopeful now. Never had this issue with years on nt and xp. Ny suggestions out there?

Posted On: 2010-08-19 . View Related Posts . . View 3 Replies .

Vista To Win7 Ultimate Upgrade Fail

I'm attempting to do an on-line upgrade from vista ultimate to windows 7 ultimate. The procedure took forever, and finally got to 83% of the final stage. The system went through another re-start and failed. It stated it is dumping physical memory to disk; attempts to restart; fails again and offers to restart in safe mode. I've tried to restart in normal and safe mode without success. It continues to loop through this and will not reset to either vista or win 7. Advice?

Posted On: 2010-08-05 . View Related Posts . . View 4 Replies .

Floppy Disk(s) Fail (40) Press F1 To Continue

I'm running windows 7 on a desktop system. Whenever i reboot the system, i receive an error message just after my desktop system loads its bios: "floppy disk(s) failed (40). Press f1 to continue. "

That is the entirety of the error message. The booting process never proceeds beyond that point, unless and until i press f1. I do not have any floppy disks on this desktop system; it is only a couple of years old (most manufacturers stop putting in floppy disks a long time ago).

Furthermore, this error message is quite recent: it only started about 3-4 weeks ago. Prior to that point, i had never seen such an error message before and windows 7 seemed to be operating properly (no problems). It was recently suggested that i update the bios to see if this might help the situation. The bios has indeed been updated, but the error message remains.


Posted On: 2010-01-29 . View Related Posts . . View 7 Replies .

Office Security Updates Continually Fail

T3 ms windows & office security updates continually fail as well as those from acrobat & apple quicktime. These updates (kb978380, kb978382 & kb979895) have repeatedly failed to install after being automatically downloaded. I've also manually downloaded these updates from the ms site, saved to the computer, and tried to install to no avail. Do i need to disable both the windows and mcafee firewalls? Please note that downloaded updates from acrobat for adobe reader and apple quicktime have also failed to install.

Coincidentally, i just discovered whild in the admin account that word now fails to save my docs - wonder if i should restore to an earlier point? Why does this continue to happen (as it has in the past)? I don't have a lot of computer savvy but after reading comments from others i am highly frustrated and bewildered with ms vista.


Posted On: 2010-04-13 . View Related Posts . . View 5 Replies .

Many Automatic Updates Continually Fail To Install

Several updates will not install when i start up automatic update, its been like this for about a year and i still have not found out what to do. These are the updates that keep failing:

Update for outlook 2003 (kb943649)
Security update for microsoft office 2003 (kb921598)
Office 2003 service pack 3 (sp3)
Security update for microsoft office powerpoint 2003 (kb948988)
Security update for office 2003 (kb945185)
Update for microsoft office 2003 (kb978551)
Security update for microsoft works suite 2005 (kb943973)
Security update for microsoft office outlook 2003 (kb945432)
Security update for microsoft office 2003 (kb953404)
Update for microsoft office outlook 2003 junk email filter (kb977840)
Security update for microsoft office word 2003 (kb954464)
Security update for office 2003 (kb954478)
Security update for microsoft office excel 2003 (kb955466)
Update for office 2003 (kb907417)
Update for microsoft office outlook 2003 (kb953432)

Ive tried downloading a couple from the download center and it says they could not be applied. I don't even use office and things like that, because well i can't, i lost the key when i bought my computer (software came with it). These updates are very bothersome. Please help


Posted On: 2010-01-29 . View Related Posts . . View 2 Replies .

Map Network Driver Fail On Win 7

I have upgraded to windows 7 professional 64-bit from vista home premium 64-bit. Installed in a dual-boot so i can switch between systems.
I map two network pontiff drives as part of my normal configuration on vista. Attempting to map these same drives on windows 7 fails login credentials. I am using the same serve share and the same user name and password.


Posted On: 2010-03-03 . View Related Posts . . View 3 Replies .

Error Code - 0x643 - Updates Fail To Install

Kb 953297 error code 0x643 and kb972590 e. C. 0x80070643. I have tried [windows fix it, ] [start ose service] and [register wups2.dll file].

Posted On: 2009-10-19 . View Related Posts . . View 4 Replies .

Microsoft Security Essential (mse) Fail To Update

I have problems with my mse. I cannot update the virus definition automatically. So far i always update it manually (download the virus def then run it to my computer) i connect to internet through wireless network available in my apartment. The network is stable and quite fast. The first time i tried to update, it worked, but not anymore after.

It always give me the message :
Error code: 0x8024402c

Error description: microsoft security essentials couldn't install the definition updates because the proxy server or target server names can't be resolved. I searched on the microsoft website about the error code and had executed all the advices given but unfortunately it didn't work, at least for my computer. I'm not a knowledgeable person in computer, but i don't think it is the problem of internet connection, since i still able use my internet very well.

I turned-off my windows firewall and tried to update, but still didn't work. I didn't use any other antivirus or firewall software other than microsoft and i'm quite satisfied, at least until now.
However, to download the virus def 2 - 3 times a week (for manual update) is not a good thing, since i know the mse has auto update feature. Can any of you find the solution for this problem? I really appreciate your feedback.


Posted On: 2010-02-22 . View Related Posts . . View 2 Replies .

Office Updates Fail Error Code 80070643

I've had a re-occurrence of an old problem. Windows update failing on office security updates. Error code 80070643. Modules that fail are  921598, 943973, 945185, 975051, 974554, 953404, 951535, 972580, 947319. Other module install ok. I've tried uninstalling office 2003 and re-installing. I've tried checking ose.exe as suggested. Patch reg cleanup x64 (for my windows 7, 64bit) fails with a message saying "a product mode mus be specified". I've tried disabling and restarting windows installer in computer management. What else can i do?

Posted On: 2010-01-29 . View Related Posts . . View 5 Replies .