Advertisements:




Error - Request Could Not Be Performed Because Of An I/o Device Error


Wd passport essential 1tbi have the specified hd listed above. One day after i disconnected my hd from my ps3 and then connected to my toshiba satellite like i always do, it did not read it. It recognizes that there is a hd in device manager but in my computer it just shows up as the drive letter. I tried changing the drive letter and but in disk management even after changing the drive letter it still has an x by the drive and says it is unreadable.

It says that there is 937gbs of space when it is far less than that. When i went to explore device, it is "the request could not be performed because of an i/o device error" i reinstalled windows 7 and it still says the same thing even after the above steps. But the wd hd still reads on my ps3 and i can see the files just fine. Can someone please help me with this issue?


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Error - Unknown Device - Usb Does Not Recognize Garmin Device

Just recently, windows 7 home premium addition has stopped detecting my garmin device. Other usb devices such as my ipod work fine. I was able to get it to detect the garmin only a few times, it would try to install the drivers but the drivers would fail to install. The garmin was working a few weeks ago. Below is a list of everything i have already tried:

Rebooting (after everything i try)
- Turning the computer off and leaving it unplugged overnight
- Completely uninstalling all drivers and software associated with the gamin.
- Manually installing drivers
- Uninstalling the unknown device and doing a search for new hardware
- Uninstalling the unknown device and doing a search for legacy hardware (this produces a device not functioning (code 10) error)
- Reverting back to a restore point before the last windows update

Please, any help would be very appreciated. I am decently computer savvy and have always been able to fix any problems that i have. This one has had me spinning my wheels for days.


Posted On: 2010-03-17 . View Related Posts . . View 2 Replies .

Device Malfunctioned Error Code - 43 - Usb Device Not Recognized

I purchased a new computer with windows 7.initially my ipod worked fine with this computer. It still charges the ipod but nothing else. In addition it will not work on my old computer.

1. I have completely uninstalled and reinstalled itunes.

2. I reset the device losing all of my music.

3. I have gone to device manager and the ipod shows up as unkown device. I have stopped the device driver and rebooted.

4. I have tried to have attached to my old computer update and i receive the exact same error and usb not recognized message.

5. Other devices work fine on the usb hub, in addition i have tried the other usb hub.

All of the above measures have failed. This all started when i was having problems updating my music to the ipod, and i chose the restore function on the summary page of the itunes software, with the device attached, and recognized. Since then nothing? Initially when the device was attached after the restore option was chosen, i got need to attach to a 2. 0 usb  high speed hub, error message? It is a 2. 0 usb high speed device. I have reviewed other questions in this forum, on apples forums, all with the same results, nothing.


Posted On: 2010-01-26 . View Related Posts . . View 2 Replies .

Error When Using Usb Device

I have a cricut personal cutting machine when i try to run programme to cut its coming up with a message, your cricut was not found, the usb drivers that this computer uses to communicate with the cricut may be out of date or not properly installed in computer it shows my device as unspecified, windows detects my cricut machine when i plug in the usb and installs drivers, saying drivers successfully installed.

Posted On: 2010-04-16 . View Related Posts . . View 4 Replies .

Error 43 Unrecognized Device

I've been using windows 7 for 6 months without a problem on 7/19 after an update all usb ports stopped recognizing or acknowledging devices, all devices except the printer that has it's own software, there is power in all ports, i am able to charge my mp3 player but i can't download files, i have uninstalled and reinstalled all drivers, and system restore with the windows 7 disk, nothing seems to work, the fixit program doesn't work, nor the troubleshooting, it recognizes there is a problem but says it can't fix automatically, i noticed the same thing happen earlier in the year with another kind of driver, mine are all intel and systems says they're up to date. I'm hoping that a fix will come like the one with nvidia.

Posted On: 2010-08-04 . View Related Posts . . View 2 Replies .

Device Manager Error

A while ago, i needed to check on some drivers for an ir device and opened the device manager.
Sometimes, i have to do this regularly, but each and every time i try to open it, i get a message that says, "navigation the web page was canceled. " Then a message pops up that says mmc has stopped working. I am confused as to what is going because all other options/tools in mmc work except device manager. I have searched the internet all over for a solution, but can't seem to find a working one.


Posted On: 2010-01-12 . View Related Posts . . View 2 Replies .

Error - Usb Device Not Recognized

Purchased hp hd5000x personal media drive in 2006. Would like to use with windows 7. But get error "" usb device not recognized"" when last used extra media device i was running vista. Now running windows 7. No matter what port i plug it into, it kills the usb port. When i first plugged it in it worked for about 5 min. S then the port died. So i know all the old data is there.

Posted On: 2010-04-03 . View Related Posts . . View 2 Replies .

Error - You Need A Wia Driver To Use This Device

Xps m1530 webcam won't work, receive error "you need a wia driver to use this device. " In windows 7

*Original title - xps m1530 webcam issues*problem:webcams just dont work on this computer anymore. The internal webcam stopped working, then i tried an external, and it didnt work, and i just bought a new external webcam which is windows 7 compatible and still no luck.

Background: bought my xps m1530 with vista 32-bit almost 2 years ago and upgraded to windows 7 64-bit when it came out. My internal webcam has not worked since. When i look at the hardware details, it says everything is working ok, both for internal and external webcams, but the video just doesn't show. The microphone on the laptop works, and i think the microphone for the external webcam works so i think the products do work. I feel its a driver issue, but i have installed so many drivers and applications and nothing seems to work.

I don't see anyone else with this problem online. When i go to the control panel and look at my hardware, and double click on the internal webcam, i get this message ""you need a wia driver to use this device. Please install it from the installation cd or manufacturer's website and try again"". I just went to dell's website and reinstalled some drivers and some more, but still have the issue. Any idea what this wia driver is? I googled it, but cant find anything specific to my product.

I have contacted both dell and hp (external webcam), and dell points their fingers and hp and also says warranty void for changing os, and hp says its computers fault (and i do think it is computers fault), but none of them are really helping me solve the problem. Can anyone help me? Is there a way to run a diagnostic on the computer ?


Posted On: 2010-06-10 . View Related Posts . . View 2 Replies .

Error - You Need Wia Driver To Use Device

Error "you need a wia driver to use this device" when trying to open canon dr5010c. Get a windows image acquisition driver to work with a canon dr5010c attached by usb port i have already downloaded twain & sisi drivers and still get error message "you need a wia driver to use this device" when i try to open canon dr5010c from the printers & devices. I am searching for a driver interface fix.

Posted On: 2010-07-20 . View Related Posts . . View 4 Replies .

Code 43 Error For Usb Device

Running windows 7 on a dell inspirion usb wire optical mouse has been working without difficulties for last three weeks since we purchased it. This morning device not working message appeared and the mouse stopped working.

The mouse works well on other systems (xp) as we checked to ensure it was not the mouse. Uninstalled all the usb drivers, and unplugged any usb devices, restarted and windows 7 which reinstalled usb drivers. The driver installation reports successful installation on controllers and root hub however indicates a device failed at the end.


Posted On: 2010-02-03 . View Related Posts . . View 3 Replies .

I/o Device Error During Win 7 Upgrade

I recently bought the $30 windows 7 professional upgrade, and i have tried installing via the .exe from my desktop. When i got to the step where it was unpacking the setup box 1, i got an i/o device error, which doesn't seem to make sense to me since there were no devices plugged in. I am not that computer savvy when it comes to these things, so any suggestions or advice would be very helpful.

Posted On: 2010-07-21 . View Related Posts . . View 4 Replies .

Error Code - 10 - Usb Device Do Not Autoplay

Autoplay won't run when i plug in a usb device. Device manager says cant start (code 10).

Posted On: 2010-07-09 . View Related Posts . . View 4 Replies .

Mobile Broadband Device - Error 711

And yes i have started all the dependants for the service(s) a hundred times and no help i cannot connect to internet with a dial up modem. And yes i have tried all of the "fixes" none work i use my laptop to do a mobile cell phone flashing service -which i cant because i cant use a modem to connect to internet or a cell phone at all anybody know the real problem? Been trying to fix for 3 months had to buy another laptop cause no one has a clue and please don't suggest it is an un-started service because i have started them all that will start it says cannot start service because a dependency isn't started!Duh! It wont start thats the problem!

Posted On: 2010-05-30 . View Related Posts . . View 2 Replies .

Error 711 - Mobile Broadband Device

I've been trying to connect to virgin broadband 2 go. The problem according to their techs is a bad or missing rasphone. Pbk file. Thanks to this forum i found the rasphone. Pbk file and when i click on the remote access phone book link i get a message stating the following: cannot load the remote access connection manager service.

Error 711: the operation could not finish because it could not start the remote access connection manager service in time. Please try operation again. I did try again but only got the same message. Any ideas of what might be causing the problem. The properties show that the file opens with remote access phonebook.


Posted On: 2010-01-20 . View Related Posts . . View 2 Replies .

Usb Scale Device Runtime Error

Usb scale device runtime error 2147191496 (80047538) "an attempt was made to reference a token that does not exist. "_radio shack part # 26-950. I am trying to install a usb scale from radio shack (26-950). This scale worked perfectly with vista. It seems to have installed correctly. Under the properties tab device status is "this device is working properly". Location is:  port_#0002. Hub_#0007.

Error is:  runtime error '2147191496 (80047538)' "an attempt was made to reference a token that does not exist" there are no new drivers. The scale worked perfectly with vista & xp. I tried to run the prograp as xp & vista: it still came up with the same error.
 
The software can be found at: http://www.Radioshack.com/search/softwareresults.jsp?Kw=26-950
Please help!
Thanks!


Posted On: 2010-05-06 . View Related Posts . . View 7 Replies .

Usb Port Error - This Device Cannot Start - Code 10

Each time i plug in a device into a usb port(memory stick, ipod etc) i get an error message "this device cannot start.code 10. " I've tried downloading drivers but it says they are up to date. This has only happened in the past week and before that they were working fine.

Posted On: 2010-04-24 . View Related Posts . . View 2 Replies .

Media Player Error - Your Device Is Using An Outdated Driver

Windows media player sound driver problem:your device is using an outdated driver that is no longer supported by windows media player. I have windows 7, office 2010. Audio realtek semiconductor corp. Driver date 5/23/2009 driver version 6. 0. 1. 5859

Posted On: 2010-06-19 . View Related Posts . . View 3 Replies .

Error - Windows Cannot Load Device Driver Code 31

Error "windows cannot load device driver code 31" with realtech lan port and pantech um175 usb. Just built a new deluxe windows 7 system two weeks ago. I loaded windows perfectly on may 5 . I also did a hardware disk driver update and everything worked great. Automatic security updates took place one week later on 05/12/10 and my realtech rtl8111dl lan port and my pantech um175 usb broadband model stopped working. Both say the driver is not installed or working.

I tried re-installing both multiple times without success. Occasionly the device manager will say invalid parameters. I can usually correct this type of thing but i can't get any internet connection device to function well enough to get connected for analysis or updates.

I have downloaded the latest drivers on another computer and tried them unsuccessfully. Each time i try to reinstall, the device gets one number higher. I am up to #5 behind the realtech lan controller name. I am out of ideas. Can you help. Thank you in advance!(Windows 7 ultimate 64 bit, biostar th55b-hd, i5-650 cpu, 4 gb ocz memory)

Pciven_10ec&dev_8168&subsys_23091565&rev_03
Pciven_10ec&dev_8168&subsys_23091565
Pciven_10ec&dev_8168&cc_020000
Pciven_10ec&dev_8168&cc_0200


Posted On: 2010-05-24 . View Related Posts . . View 10 Replies .

Error - Mtp Usb Device Has A Driver Problem

Receive error "mtp usb device has a driver problem" with new camera. Can someone please help me or do i need to get a new camera? Keep getting mtp usb device has a driver problem. How do i fix this or can i fix this?

Posted On: 2010-06-05 . View Related Posts . . View 3 Replies .

Error - Your Device Is Using Outdated Driver That Is No Longer Supported

Whenever i open windows media player, an error which says "your device is using an outdated driver that is no longer supported by windows media player. " Comes up. Can somebody help me solve this problem?

Posted On: 2010-07-07 . View Related Posts . . View 2 Replies .

Cd Drive Error Code 19 - Cannot Start Hardware Device

After installing windows 7, this error appears with my cd drive, windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My laptop ran windows xp, and i used the windows 7 compatibility software to see if windows 7 can work with my laptop and it was approved.

Long story short after i installed windows 7 i installed all the drivers the sony esupport told me to, however my cd drive isn't working. When i go to the device manager and click on its properties i get the following error message "windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)". I tried uninstalling the driver and restarting and that didn't fix the problem either.


Posted On: 2010-02-06 . View Related Posts . . View 2 Replies .

Error - Device Driver Software Was Not Successfully Installed

Error device driver software was not successfully installed. This device cannot start (code 10) for cddvd drive. I am running windows 7 on a hp pavilion a1600n and sometime over the last month the dvd/cd drive stopped recognizing dvd and cds. It is opening and closing and spinning the disk when i put them in the drive, just not recognizing anything beyond that.

The device status reads this device cannot start (code10). From what i could find online code 10 was a hardware general purpose error. I have tried switching out for another dvd/cd drive and even switched out the cable inside to see if that was the error, it was not.

When i plugged the second dvd/cd drive in it tried to locate the drivers online and and informed me that device driver software was not successfully installed. I have been trying to find some sort of solution online to no avail.


Posted On: 2010-06-29 . View Related Posts . . View 6 Replies .

Error Code - 32 Driver Service For This Device Has Been Disabled

Error code 32 - a driver (service) for this device has been disabled. An alternate driver maybe providing the functionality.

Device type dvd/cd rom drives
Manufacture (standard cd rom drive)
Location bus number 1, target 1d 1. Lun 0
My computer keeps saying everything is up to date and working fine.


Posted On: 2010-05-06 . View Related Posts . . View 9 Replies .

Unable To Load Device Driver Error Code 39

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) this applies to the generic disk drives not the dvd drivei am running windows vista service pack 2. For reasons unknown to me i got the error code 39 on my dvd drive and my generic disk drives after a reboot. I uninstalled the software i had just installed. Didn't change a thing. Anyway, i was able to go into the the registry and delete the upper and lower device filters for the cdrom and now have my dvd drive back. I tried running system restore and it won't work.

It completes ok. But says it encountered an error so could not restore the system (this is regardless of what date i chose to restore to). This is the second time this error 39 has happened to me and a system restore fixed it the first time. My hard drive is listed in with the drives with the error 39, but doesn't have the same error, although it uses the same drivers.

I know this is an issue with the registry. But i am leary about deleting the limits filtering for the generic drives for fear of losing my hard drive. Now, my question is: if i remove the upper and lower filters for the disk drives and reboot, am i going to hose my hard drive?


Posted On: 2010-05-26 . View Related Posts . . View 2 Replies .

Device Driver For Hard Drive Upgrade Error On Hp S3620f

Trying to upgrade from windows vista 64bit to windows 7  64bit getting error need an update device driver for my hard drive, spent almost two hours with tech support case 1117693442 and the said go back to mfg for driver update. Model hp s3620f  and i have latest driver segate hd.

Posted On: 2009-11-21 . View Related Posts . . View 2 Replies .

Error Code 43 - Windows Has Stopped Device, It Has Reported Problems

Windows 7 does not recognize my asrock p4v88+ motherboards usb ports since installation of windows 7. Device manager shows this error code: windows has stopped this device because it has reported problems. (Code 43). I have installed latest chipset drivers and latest bios still no joy.

Posted On: 2009-12-08 . View Related Posts . . View 4 Replies .

Media Player Error Message - Your Device Is Using Outdated Driver

Windows media player error message: your device is using an outdated driver. That is no longer supported by windows media player. Checked web help: windows media error: you have encountered an error message while using windows media player. Additional information is not currently available for this error. Has any one encountered this problem and an answer? 

Posted On: 2009-12-18 . View Related Posts . . View 6 Replies .

Error - A Required Cd/dvd Drive Device Driver Is Missing

Windows 7 upgrade ultimate 64bit from windows vista home premium 64bit - error with "a required cd/dvd drive device driver is missing. I can see many posts for this problem, but the different solutions all confuse me. I am not a pc techie. I was trying to run windows 7 64bit ultimate upgrade from windows vista 64bit home premium on my pc. Before i ran windows 7 upgrade using the 64bit disk i bought from a retailer in sheffield england, i checked on the microsoft website and downloaded windows upgrade advisor.

This reported a number of minor issues, which i dealt with. It did not report any issue with my motherboard or cd/dvd device. I also downloaded easy transfer, but as i had recently rebuilt my pc i did not have many files to copy over so i have not yet used it. I have now rolled back the install, after getting very frustrated trying to obtain the "driver"some of the postings on the web suggest:buying an external usb cd/dvd device. I might do this and try again getting an update for ite it8211 ata/atapi controller driver - whatever that means usb install option involving ripping the disk into a iso image and then making a bootable usb stick.

Why on earth do i need to do this? Surely using a usb external dvd/cd device and putting into that the windows 7 upgrade disk will do the same job?More important what is an iso image? How do i create it? Why should i have to do this?This software has cost me gbp180. 00 when i bought it from currys retail store sheffield uk w/c jun 21st 2010, and i cannot get it to work. It is not at all satisfactory! I deliberately waited till now before buying to make sure a all the bugs were ironed out!

Obviously they are not!My pc was bought new from mesh in may 2009 and the build detail is:mesh desktop pc model xgs pii 955amd phenom ii x4 955 black quad core processor am3 3. 20ghz, 8mb cache ddr2/3asus m4a78-e mainboard amd 790gx hybrid crossfirex - am2+ phenom ii, ddr2- atx8192mb 800mhz dual channel ddr2 sdram2 x 750gb serial ata2 hard drive with 3mb buffer (1. 5tb) raid 0 configuration (stripe)samsung 22x dual layer dvd writer super format +r/-r/rw/ram this shows in device hardware as tsstcorp cddvdw sh-s223b scsi cdrom device.

The driver is located in c:windowssystem32driverscdrom.sys1gb ati hd4890 graphics accelerator hd 3300 gpu - hybrid crossfire xpcie gigabit lan controller featuring ai net 2 - asus m4a78 proi will also try to call microsoft support on 0844 800 2400 using access code 1233 when prompted. However, i wonder if anyone else who has had the same problem with a similar machine can advise how they sorted out the issue.


Posted On: 2010-06-25 . View Related Posts . . View 5 Replies .

Nikon D60 Error - Windows Has Stopped This Device - (code 43)

After connecting my nikon d60 via usb after a minute or so i get this error "windows has stopped this device because it has reported problems. (Code 43)". I have been using windows 7 for a while now and this error has only just begun. It often appears after importing photos to picasa.

Posted On: 2009-11-22 . View Related Posts . . View 2 Replies .

Error - Base System Device Doesn't Have A Driver

Upon installing windows 7, there is a error icon on the computer in the devices & printers list. We've found that the troubleshooter indicates that we have two missing drivers, but we no way of knowing what driver we should install to fix this. Below are the details from the troubleshooter report, can you help me fix this issue?

Posted On: 2009-12-10 . View Related Posts . . View 6 Replies .