Advertisements:




Error Code - 10 - Usb Device Do Not Autoplay


Autoplay won't run when i plug in a usb device. Device manager says cant start (code 10).

View Full Post With 4 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Usb Device Goes To Autoplay Then Closed

I recently purchased a new pc with windows 7, all in all i like it, however i do have a problem .

I have lots of small usb flash drive devices - one for each of my clients - which i use for backing up config files and certain pieces of information for them.

However, when i try to access any of these devices through my windows 7 pc a strange thing happens, the device is recognized, the autoplay window appears, then before i can do anything it closes and the device disappears from "my computer".

I've tried the devices in both my laptop and another pc in the office running vista and both can access the data without a hitch, so its not the actual usb drives. I've got other usb external hard drives hooked into the windows 7 pc running perfectly well, plus a few other usb devices, so its not a usb issue.


Posted On: 2010-01-18 . View Related Posts . . View 2 Replies .

Device Malfunctioned Error Code - 43 - Usb Device Not Recognized

I purchased a new computer with windows 7.initially my ipod worked fine with this computer. It still charges the ipod but nothing else. In addition it will not work on my old computer.

1. I have completely uninstalled and reinstalled itunes.

2. I reset the device losing all of my music.

3. I have gone to device manager and the ipod shows up as unkown device. I have stopped the device driver and rebooted.

4. I have tried to have attached to my old computer update and i receive the exact same error and usb not recognized message.

5. Other devices work fine on the usb hub, in addition i have tried the other usb hub.

All of the above measures have failed. This all started when i was having problems updating my music to the ipod, and i chose the restore function on the summary page of the itunes software, with the device attached, and recognized. Since then nothing? Initially when the device was attached after the restore option was chosen, i got need to attach to a 2. 0 usb  high speed hub, error message? It is a 2. 0 usb high speed device. I have reviewed other questions in this forum, on apples forums, all with the same results, nothing.


Posted On: 2010-01-26 . View Related Posts . . View 2 Replies .

Code 43 Error For Usb Device

Running windows 7 on a dell inspirion usb wire optical mouse has been working without difficulties for last three weeks since we purchased it. This morning device not working message appeared and the mouse stopped working.

The mouse works well on other systems (xp) as we checked to ensure it was not the mouse. Uninstalled all the usb drivers, and unplugged any usb devices, restarted and windows 7 which reinstalled usb drivers. The driver installation reports successful installation on controllers and root hub however indicates a device failed at the end.


Posted On: 2010-02-03 . View Related Posts . . View 3 Replies .

Usb Port Error - This Device Cannot Start - Code 10

Each time i plug in a device into a usb port(memory stick, ipod etc) i get an error message "this device cannot start.code 10. " I've tried downloading drivers but it says they are up to date. This has only happened in the past week and before that they were working fine.

Posted On: 2010-04-24 . View Related Posts . . View 2 Replies .

Usb Flash Drive Error: This Device Cannot Start (code 10)

This device cannot start. (Code 10). This is what i get on my geek squad 8 gb usb flash drive when i plug it in and when i go to device manager it shows it under portable devices as wpd file system volume driver and it used to show as a drive and i used to use it as a ready boost also and neither are working now and i cant update the drivers or get it to recognize it when i uninstall it or uninstall it nothing works and i dont no what to do or where to turn pleas help!

Posted On: 2010-02-26 . View Related Posts . . View 2 Replies .

Error - Unknown Device - Usb Does Not Recognize Garmin Device

Just recently, windows 7 home premium addition has stopped detecting my garmin device. Other usb devices such as my ipod work fine. I was able to get it to detect the garmin only a few times, it would try to install the drivers but the drivers would fail to install. The garmin was working a few weeks ago. Below is a list of everything i have already tried:

Rebooting (after everything i try)
- Turning the computer off and leaving it unplugged overnight
- Completely uninstalling all drivers and software associated with the gamin.
- Manually installing drivers
- Uninstalling the unknown device and doing a search for new hardware
- Uninstalling the unknown device and doing a search for legacy hardware (this produces a device not functioning (code 10) error)
- Reverting back to a restore point before the last windows update

Please, any help would be very appreciated. I am decently computer savvy and have always been able to fix any problems that i have. This one has had me spinning my wheels for days.


Posted On: 2010-03-17 . View Related Posts . . View 2 Replies .

Usb Headset - This Device Cannot Start - Code 10

I've just bought a usb headset today and tried to use it. I got a driver error message when first plugged in. The help system proved useless. After doing some searches on this forum i checked the device manager and found that the usb audio device properties indicates that 'this device cannot start. (Code 10)'. The forum entries suggests that many people are having similar problems.

Mine is a new windows 7 64 bit install on a new hard drive, but on an older pc hardware - asus a8n sli premium. Anyone got any suggestions as to resolving the problem. Note that a normal headset worked fine yesterday (but i broke it) plugged into the jack sockets but i wanted to use a usb headset so as to avoid having to keep going around the back of the pc to change to my 2. 1 speaker system.


Posted On: 2010-03-30 . View Related Posts . . View 2 Replies .

Usb Devices - This Device Cannot Start (code 10)

"usb devices keep getting in error in device manager after computer reboot"hi. Whenever i reboot my computer 4 of my 5 usb ports are in error in device manager with error "this device cannot start. (Code 10)". I uninstall them, restart and they begin to work. Until next restart.

I've checked if the driver version is the same for all five usb ports and it's confirmed (driver version 6. 1. 7600. 16385 from microsoft). What can i do to solve it? Computer is a dell precision 490. Device is an intel (r) 82801g (ich family) usb universal host controller.


Posted On: 2010-06-23 . View Related Posts . . View 7 Replies .

Autoplay Not Working For Usb Flash Drive

Auto-play works smoothly on my windows 7 pro 64 bit installation with one exception. For some reason, it will not initiate with my usb drive (formatted fat32). The drive shows up in explorer just fine. I have already gone into the control panel for autoplay, and changed just about every setting imaginable, to no avail.

This is not a huge deal, except that it would be nice for this device to have the same behavior as other autoplay type devices. Oh, by the way, autoplay works just fine with this usb thumb drive on my notebook.


Posted On: 2010-01-08 . View Related Posts . . View 2 Replies .

Ati I/o Usb 2.0 Ehci Device Cannot Start - Code 10

Since i updated my compaq sr1800nx from xp to windows 7 home premium, i cannot use my 2. 0 usb ports. I have talked to ms, activity 1219813, and hp with no success. I have looked for driver support from asus and ati with no success. In fact my mother board, model p5rc-la, does not exist on the asus web site.

Posted On: 2010-05-28 . View Related Posts . . View 2 Replies .

Making Synctoy Autoplay When Usb Drive Is Plugged In

I'm running windows 7 home premium 64 bit. I asked this question over on experts-exchange, and they couldn't figure it out, so i'm hoping you all will have some ideas. I have a portable external usb harddrive. I use microsoft synctoy to "echo" files from one folder on my internal harddrive to a folder on the external harddrive. What i'm trying to do is have the synctoy program open when i plug in the external drive.

I've tried a few things. I went to the autoplay settings in the control panel and changed the mixed content setting to "ask me every time". That got the autoplay dialog to come up, but there was no way to select synctoy as the action to run. I also tried creating an autorun. Inf file in the root directory of the external harddrive. In it, i included the full path for synctoy on the computer. I tried this with and without quotation marks.

It seemed to have no effect on anything. Someone then suggested that i install microsoft tweakui, and have it add synctoy to the autoplay list. However, it appeared to me that tweakui isn't compatible with windows 7 (32 and 64 bit). I found compatibility on one of microsoft's windows 7 pages. Just to be clear, the goal is to get synctoy to open. I don't want the synchronization (echo) process to initiate.


Posted On: 2010-06-27 . View Related Posts . . View 5 Replies .

Error - Windows Cannot Load Device Driver Code 31

Error "windows cannot load device driver code 31" with realtech lan port and pantech um175 usb. Just built a new deluxe windows 7 system two weeks ago. I loaded windows perfectly on may 5 . I also did a hardware disk driver update and everything worked great. Automatic security updates took place one week later on 05/12/10 and my realtech rtl8111dl lan port and my pantech um175 usb broadband model stopped working. Both say the driver is not installed or working.

I tried re-installing both multiple times without success. Occasionly the device manager will say invalid parameters. I can usually correct this type of thing but i can't get any internet connection device to function well enough to get connected for analysis or updates.

I have downloaded the latest drivers on another computer and tried them unsuccessfully. Each time i try to reinstall, the device gets one number higher. I am up to #5 behind the realtech lan controller name. I am out of ideas. Can you help. Thank you in advance!(Windows 7 ultimate 64 bit, biostar th55b-hd, i5-650 cpu, 4 gb ocz memory)

Pciven_10ec&dev_8168&subsys_23091565&rev_03
Pciven_10ec&dev_8168&subsys_23091565
Pciven_10ec&dev_8168&cc_020000
Pciven_10ec&dev_8168&cc_0200


Posted On: 2010-05-24 . View Related Posts . . View 10 Replies .

Cd Drive Error Code 19 - Cannot Start Hardware Device

After installing windows 7, this error appears with my cd drive, windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My laptop ran windows xp, and i used the windows 7 compatibility software to see if windows 7 can work with my laptop and it was approved.

Long story short after i installed windows 7 i installed all the drivers the sony esupport told me to, however my cd drive isn't working. When i go to the device manager and click on its properties i get the following error message "windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)". I tried uninstalling the driver and restarting and that didn't fix the problem either.


Posted On: 2010-02-06 . View Related Posts . . View 2 Replies .

Error Code - 32 Driver Service For This Device Has Been Disabled

Error code 32 - a driver (service) for this device has been disabled. An alternate driver maybe providing the functionality.

Device type dvd/cd rom drives
Manufacture (standard cd rom drive)
Location bus number 1, target 1d 1. Lun 0
My computer keeps saying everything is up to date and working fine.


Posted On: 2010-05-06 . View Related Posts . . View 9 Replies .

Unable To Load Device Driver Error Code 39

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) this applies to the generic disk drives not the dvd drivei am running windows vista service pack 2. For reasons unknown to me i got the error code 39 on my dvd drive and my generic disk drives after a reboot. I uninstalled the software i had just installed. Didn't change a thing. Anyway, i was able to go into the the registry and delete the upper and lower device filters for the cdrom and now have my dvd drive back. I tried running system restore and it won't work.

It completes ok. But says it encountered an error so could not restore the system (this is regardless of what date i chose to restore to). This is the second time this error 39 has happened to me and a system restore fixed it the first time. My hard drive is listed in with the drives with the error 39, but doesn't have the same error, although it uses the same drivers.

I know this is an issue with the registry. But i am leary about deleting the limits filtering for the generic drives for fear of losing my hard drive. Now, my question is: if i remove the upper and lower filters for the disk drives and reboot, am i going to hose my hard drive?


Posted On: 2010-05-26 . View Related Posts . . View 2 Replies .

Error When Using Usb Device

I have a cricut personal cutting machine when i try to run programme to cut its coming up with a message, your cricut was not found, the usb drivers that this computer uses to communicate with the cricut may be out of date or not properly installed in computer it shows my device as unspecified, windows detects my cricut machine when i plug in the usb and installs drivers, saying drivers successfully installed.

Posted On: 2010-04-16 . View Related Posts . . View 4 Replies .

Error Code 43 - Windows Has Stopped Device, It Has Reported Problems

Windows 7 does not recognize my asrock p4v88+ motherboards usb ports since installation of windows 7. Device manager shows this error code: windows has stopped this device because it has reported problems. (Code 43). I have installed latest chipset drivers and latest bios still no joy.

Posted On: 2009-12-08 . View Related Posts . . View 4 Replies .

Nikon D60 Error - Windows Has Stopped This Device - (code 43)

After connecting my nikon d60 via usb after a minute or so i get this error "windows has stopped this device because it has reported problems. (Code 43)". I have been using windows 7 for a while now and this error has only just begun. It often appears after importing photos to picasa.

Posted On: 2009-11-22 . View Related Posts . . View 2 Replies .

Error - Usb Device Not Recognized

Purchased hp hd5000x personal media drive in 2006. Would like to use with windows 7. But get error "" usb device not recognized"" when last used extra media device i was running vista. Now running windows 7. No matter what port i plug it into, it kills the usb port. When i first plugged it in it worked for about 5 min. S then the port died. So i know all the old data is there.

Posted On: 2010-04-03 . View Related Posts . . View 2 Replies .

Usb Scale Device Runtime Error

Usb scale device runtime error 2147191496 (80047538) "an attempt was made to reference a token that does not exist. "_radio shack part # 26-950. I am trying to install a usb scale from radio shack (26-950). This scale worked perfectly with vista. It seems to have installed correctly. Under the properties tab device status is "this device is working properly". Location is:  port_#0002. Hub_#0007.

Error is:  runtime error '2147191496 (80047538)' "an attempt was made to reference a token that does not exist" there are no new drivers. The scale worked perfectly with vista & xp. I tried to run the prograp as xp & vista: it still came up with the same error.
 
The software can be found at: http://www.Radioshack.com/search/softwareresults.jsp?Kw=26-950
Please help!
Thanks!


Posted On: 2010-05-06 . View Related Posts . . View 7 Replies .

Dvd Device Driver Blocked - Unable To Use Device Code 48

I get a code 48 message. I have an intel d945psn board that has run w2000 on a eide hard drive. I upgraded to windows 7 with a new sata hard drive clean install, but transferred files with pc mover. Now my dvd burner(s) don't work citing the infamous code 48 and saying that the software for this device has been blocked from starting because it is known to have problems with windows.

Aren't cd/dvd device drivers pretty standard, and included with the bios?  How do i deal with that problem. I have tried to update drivers through "driver access", but the problem persists. The device doesn't even show up in windows explorer or my computer, but can be seen in device manager and on the cmos menu. The same is true of my second, identical sata hard drive. It appears that some of my important system drivers have been blocked.


Posted On: 2010-03-01 . View Related Posts . . View 2 Replies .

Error - Mtp Usb Device Has A Driver Problem

Receive error "mtp usb device has a driver problem" with new camera. Can someone please help me or do i need to get a new camera? Keep getting mtp usb device has a driver problem. How do i fix this or can i fix this?

Posted On: 2010-06-05 . View Related Posts . . View 3 Replies .

Usb Hub Displaying As Device In Device Manager

Pretty much all my device connected to my usb hub used to show in device manager as separate devices. However, they now only show under the name "kevin o'connor" (the name of my zune). Open the device's properties and going to the hardware tab will show all the device connected via the usb hub.

Therefore, all the devices do in fact work, it's just a little bothersome to me, and the fact that i can't safely remove anything from the hub without having to eject the entire hub. Here's a screen shot that shows what the hub shows as: http://i34. Tinypic.com/34fxmp4.png


Posted On: 2009-10-28 . View Related Posts . . View 4 Replies .

Error Code - 19 - Usb Stuck

I have a 8gb usb struck which work fine. After a windows reboot without safely remove the device. It cannot use any more.

Syndrome: when double click the drive letter (g:), pop up "please insert a disk into removable disk"
Disk management: no media on the disk device management: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

Tried: put into other windows xp, windows vista and has the same result installed some usb format tools such as hp's one uninstall the driver and detected with the same result. Does anyone has any idea to fix it?


Posted On: 2010-05-10 . View Related Posts . . View 6 Replies .

Usb Hub Code 43 Error

I'm getting a code 43 error for a hub . It's a wireless router. I'm able to use the wireless connection just fine. But since the router is right next to my windows 7 pc, it would be nice if i could use a direct wired connection to the router as a hub for my internet connection. I had a cisco wireless router and it seemed to stop working. So then i bought an incredibly cheap wifi router. Worked for a while. Then the direct connection to it stopped working too.

[How silly of me to think that the problem was with the cisco router. Bet when i fix this, that router as a hub works fine, too. ] I've collected the msinfo32. Nfo file and will post it on skydrive as soon as skydrive is operational again. Windows 7 on a new pc.


Posted On: 2010-04-10 . View Related Posts . . View 2 Replies .

Error Code 43 Usb Not Recognized

I have a toshiba satellite l305. Windows 7 was installed in oct 09. Everything has been working fine until today when a message "usb device not recognized" appeared along with a note of a error code 43. None of the ports appear to work. Previously they had been used for a mouse, my blackberry (including syncing with outlook) and a palm handheld. I have uninstalled all usb ports and restarted the computer but the same messages occur.

Posted On: 2010-02-18 . View Related Posts . . View 2 Replies .

Usb Ports Not Working - Error Code 43

Im having a problem with all of my usb ports not functioning properly. It all started around christmas and i wish i knew what i did to make this happen because prior to that all of the ports worked fine. Anytime i plug a usb device in i get a message saying that the device is not recognized. In the device manager under the usb section i get an "unknown device" with or without something plugged in. Ive tried quite a few different drivers and read 100's of forum posts trying to help solve the problem. No one seems to have an answer and lots of people seem to be having the same problem any help would be appreciated.

System specs:

Evga nforce 750i sli ftw - board
Intel core2quad 9450 - chip
4gb ocz ram
Nvidia geforce 9800 gtx - video


Posted On: 2010-01-28 . View Related Posts . . View 3 Replies .

Error Code 52 - Usb Ports Not Working

I have recently purchased a new laptop with windows 7 and had no initial problems connecting usb devices (mouse, hard drive, camera etc. ) To the ports. Since installing a number of windows updates none of my usb ports will now recognize any hardware that is connected to them.

The error code is quoted as follows "windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52".

I have been into device manager and notice that each usb icon has a yellow exclamation mark icon next to it. I have uninstalled each usb port and scanned for hardware changes which has no positive affect. I have also tried to 'update driver software' in device manager and again this tells me that the driver is up-to-date for each usb port.


Posted On: 2010-03-07 . View Related Posts . . View 4 Replies .

Iphone Connection Via Usb Cable Does Not Function. Error Code 37

Iphone connection via usb cable does not function. Error code 37 - cannot initialize connection. Has sombody a solution? Thanks. See above statement. Iphone connection via usb cable. Error message code 37 - cannot initialize connection.

Posted On: 2010-07-27 . View Related Posts . . View 2 Replies .