Advertisements:




Map Network Driver Fail On Win 7


I have upgraded to windows 7 professional 64-bit from vista home premium 64-bit. Installed in a dual-boot so i can switch between systems.
I map two network pontiff drives as part of my normal configuration on vista. Attempting to map these same drives on windows 7 fails login credentials. I am using the same serve share and the same user name and password.


View Full Post With 3 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Nas Invisible In Network Map

I have 7 windows 7 computers networked via a gigabit switch and a verizon fios router. They all share access to an nas. 6 of the 7 display the nas just fine in the network map. The 7th, a netbook and the only one running 32-bit home premium instead of 64-bit professional, doesn't. I can access nas folders directly from the netbook using ip, but the nas doesn't show in the network map. More importantly it doesn't show as a backup location, so i can't backup that one machine.

Since the problem appears to be with the local security settings, how can the settings be adjusted when secpol. Msc is not provided in home premium?


Posted On: 2010-02-20 . View Related Posts . . View 2 Replies .

Unknown Device On Network Map

Netbook running win7 starter over a wireless network. Full network map shows a big "?" Between netbook and wireless router. This is not seen by any other network computers which are running either vista or xp.netbook can access the other computers but netbook is not accessible to other computers. Error message says to check spelling of computer name. Workgroup is set up and the same for all. No home-groups setup. Very concerned about the unknown device.

Posted On: 2010-01-02 . View Related Posts . . View 3 Replies .

Can't Map External Drive Into Network

My entire household upgraded to windows 7 and now we cant map our external drive onto the network, only the base pc can access it, how do we map an entire drive not just sub-

Posted On: 2009-12-14 . View Related Posts . . View 2 Replies .

Win7 Will Not Map Or Access Network Drive

Windows 7 64 bit will not map or access network drive on network when connecting wifi. On copper it works fine. Windows 7 32 bit works fine on the same wireless network. I have two notebook computers. Both run windows 7. One 32 bit, one 64 bit. The network is a belkinn+ wireless router with one switch downstream. I have a wd mybook world 2 network drive on the network and connected to the switch.

When either computer is connected via copper the drive is accessible. When the 32bit computer is connected via wifi the drive is also accessible. When the 64bit computer is connected wirelessly, the drive is not accessible. It used to work. Something changed in the last few weeks and i don't know what. I think all i have done is installed microsoft updates.


Posted On: 2010-04-01 . View Related Posts . . View 3 Replies .

After Upgrade I Can No Longer Map Network Drives

I've just upgraded from vista business to 7 professional (64 bit). With the upgrade i can no longer map network drives to one of my servers (running 64-bit server 2008) but i can map network drives for my server running server 2003 (32-bit). I'm running 32-bit windows 7 professional. I cannot map network drives on my 64-bit server 2008 server but can on my 32-bit server 2003. I was able to access these folders with vista business.

Posted On: 2009-10-22 . View Related Posts . . View 3 Replies .

Network & Sharing Center / See Full Map

When i use the "see full map" in the network & sharing center it works fine and shows my pc connected to my switch then to the gateway to the internet, but after the machine has been to sleep and been wakened the map shows a question mark between my pc and the switch? The question mark is labeled "unknown".

Thinking this could be some sort of trojan i have scanned my pc with all of the usual virus detectors and malware detectors but nothing shows. If i do a reboot the map resets to what i expect, but if the machine goes to sleep or hibernate the question mark re-appears. I am using windows 7 home premium.


Posted On: 2010-04-11 . View Related Posts . . View 7 Replies .

Webcam Driver Open Fail - Please Restart Camera Or Computer

I have installed 7 ultimate and this driver stopped working, i contacted gateway support and was advised that since i did not get the upgrade directly from gateway that i had to seek to the third party vendor for help. Any advise on this?

Posted On: 2009-10-23 . View Related Posts . . View 7 Replies .

Error - Argus Dc1620 Digital Camera Driver Open Fail

Installed software for argus dc1620 digital camera but it didn't install driver. Downloaded driver at argus website for the dc1620 but didn't work. Whats next? On 64-bit windows 7.

Posted On: 2010-06-10 . View Related Posts . . View 3 Replies .

Cannot Map Nas Drive

I am trying to map a nas box that we use for automated back-ups and i get the message "the network name can not be found. 0x80070043".

The thing it we just connect by its internal ip address, not server, host or computer name. It says name can not be found, it doesn't have to find the name i am telling it the address. On xp & when we had win 2000 we just put 192. 168. 1. 220 and it would ask for name & password and then connected. I can browse our other computers and map a drive to them if i wanted but just not the nas box.

I can also see the web interface of the nas by putting that ip address in firefox, and it is working fine on our xp machines, so i know it is up and running. Its just on win 7 it will not connect. I am running build 7100.


Posted On: 2009-07-11 . View Related Posts . . View 5 Replies .

Map A Drive In Win 7

When i try and map a network drive on a windows 7 machine from a vista machine it never sees the executable. It says i do not have permission. I have map many a drive in xp and vista but windows 7 wants you to belong to a home group but you can't if your not running windows 7. Windows 7 see the network and the systems. Vista see the network and the systems but you can't connect through the vista system. I have open up sharing in everyway i know how on the windows 7 system and it see the program on the windows 7 drive from the vista system but not the executable.

My customer always ran quickbooks through a map drive but not with windows 7. It just won't let you see it. I have talked to a couple of other it guys and they have the same problems. I try and troubleshoot with windows troubleshooter and it keep on telling me to start a home group but it says all systems have to be running windows 7. It is getting to be a pain. I like windows 7 and i like vista but this problem is causing me concern. Can anyone lead me in the right direction?


Posted On: 2010-07-19 . View Related Posts . . View 2 Replies .

Win 7 Drive Map Issues

I have a win 2k3 std r2 server and 100 xp-pro workstations connected via the lan. On the xp workstations i map the l: -drive to a shared folder on the server therefore l: ="\serversharedfolder (\fs1aim root). So i need to run an executable from a sub-folder off the l: - drive eg l:aimun.exe. This works fine in xp!

I have a new windows 7 professional pc joined to the domain. I need to map the same drive and run the same executable from the sub-folder off the l:-drive. I mapped the l: drive on this pc. I can open read, write to the l: drive and it's sub-folders but when i try to run the exe (as in the xp pro example above) windows 7 stops and prompts me and says;

"The run.exe is setup to run from l:aim but you are trying to set it up to run from \fs1aim_rootaim please correct the network drive mapping. " I cannot get windows 7 to recognize the full path (\fs1aim root) as the l:-drive when trying to run executable.


Posted On: 2010-04-23 . View Related Posts . . View 3 Replies .

Network Driver Outdated

I am in a bit of pickle at the moment i want to play a hosted game of dawn of war with my brother but cant because of some error message which i figured out the problem for. Which is a outdated driver but when i try to update through windows it doesn't work and i have manually searched for this driver everywhere. I need 2wire usb remote ndis ethernet for the 2071 gateway and i have windows 7 32bit. If you could give me a link to a download of the driver or where it would be to download.

Posted On: 2010-05-12 . View Related Posts . . View 2 Replies .

Network Printer Driver Not Found

I have installed and tested a dell p1500 laser print as a local printer. When i attempt to install the same device as a network printer, the printer is found via the network, but the drivers can not be located. If i could locate where that driver was installed for the local installation, would it also work for the network installation?If so, where do i locate the drivers for the locally installed devices?

Posted On: 2010-07-02 . View Related Posts . . View 2 Replies .

No Printer Driver Found On The Network

I have three computers running windows 7, one is 64bit with the printer hooked up to it and  two 32bit wireless. Only one of the wireless computers will find and install the drivers for the printer. The other wireless computer will see the printer but say's that there is no printer driver found on the network.

Posted On: 2010-03-22 . View Related Posts . . View 2 Replies .

Network Printer Driver Canon D680

I trying to connect to home network computer running xp pro and making the printer available to my new win7 laptop. I now have the xp resources available like hard drives. I am unable to connect to the printer.

I have downloaded the latest driver from canon which is a 32-bit driver. We selecting the printer it asks for the driver which i select and at the end it says unable to connect to the printer. I am able to connect to the xp pros drives.


Posted On: 2010-01-30 . View Related Posts . . View 2 Replies .

Hp 3030 Printer - Unable To Find Driver On Network

Have a home network of xp machines that use wireless to print to a hp 3030 printer that is usb attached to a win xp pro sp3 desktop. All find hp/print fine. Added a w7 home prem 64b laptop, changed the default workgroup name -> existing xp workgroup.

Win 7 finds attached 3030 fine over net, but: attempting to add the printer results in: "unable to find driver on the network. " Needs an . Inf file. Trying to find such a file locally fails; configuring add printer to look at windows update also fails. Hp.com says that support for this printer is "in windows 7". I can't find a driver/. Inf file to d/l.


Posted On: 2010-05-02 . View Related Posts . . View 2 Replies .

Re-enable The Virtual Machine Network Services Driver

To fix this problem, re-enable the virtual machine network services driver on one or more ethernet adapters or reinstall virtual pc. Upon opening the freshly downloaded virtual pc 2007 from the windows orb, i was presented with a caution-virtual pc dialog box. After reading the short warning i proceeded on trying to find solutions. I've uninstalled installed virtual pc a couple of times. I cannot find anything about virtual machine network services drivers. Can you help me?

Posted On: 2009-10-28 . View Related Posts . . View 2 Replies .

Broadcom 802.11g Network Adapter Driver Not Available

I upgraded my hp pavilion m8100n from vista to win 7. I no longer have a broadcom 802. 11g network adapter and no access to my wireless network. All i'm told is there is no driver available. What next? Where and how do i get a network adapter?

Posted On: 2009-11-16 . View Related Posts . . View 3 Replies .

Drivers Fail To Load

The driver failed to load for the device - ''ubhelper.sys'' ''pxhlpa64.sys'' ''ntidrvr.sys''
Packardbell mybackup - failed to write to dvd/cd - another driver issue_ ntidrvr.sys
How can i update these drivers? Or get a valid digital signature? Or failing that- how allow certain drivers to run even tho signature/certificate out of date?


Posted On: 2010-04-18 . View Related Posts . . View 2 Replies .

Windows Updates Fail

The following updates fail to install on my computer. I am running windows vista home edition x64 on an hp pavilion dv7 laptop.

Update for windows vista for x64-based systems (kb980248)
Security update for microsoft office excel 2007 (kb978382)
Security update for microsoft office outlook 2007 (kb972363)
Security update for microsoft office publisher 2007 (kb980470)
Security update for microsoft office visio viewer 2007 (kb973709)
Security update for the 2007 microsoft office system (kb972581)
Security update for the 2007 microsoft office system (kb974234)
Security update for the 2007 microsoft office system (kb978380)
Update for microsoft office infopath 2007 (kb976416)
Update for microsoft office onenote 2007 (kb980729)
Update for microsoft office outlook 2007 junk email filter (kb981433)
Update for microsoft office word 2007 (kb974561)
Update for the 2007 microsoft office system (kb981715)


Posted On: 2010-04-29 . View Related Posts . . View 2 Replies .

Security Updates Fail

This is so ridiculous. I've been getting a blue screen for a long time now. The updates don't want to install. Took it to geek squad, only for them to tell me it's infected and that i would have to do a restore. That would cost 130 dollars. They are about as useful as a burning bag of. Anyway, i get failures every single time i try to download updates. It's not the kb number that people are referencing. It is a different number every time. I can't copy all of the errors because it won't let me, and i don't want to type it all out.

But, a couple of them are error code: code 80200010, kb 959130 and 973768. Those are two of a million. I have restored my computer to factory settings. The only things on it are windows files, avg and itunes (with no music on it). I was told i could reinstall my operating system, but when i put the disc in, to uninstall and reinstall a clean version of vista, it does nothing. The disc doesn't read at all, and in fact, it just got stuck in there and i can't get it out.

The disc sounds like it fires up for a moment, then nothing. When i go into computer, then click on the disc drive, it tells me to insert a disc, then kicks mine out. Other discs work fine. Can someone please shed some light. The geek squad is a rip-off. Don't ever buy a warranty from best buy. It does absolutely nothing for you. You just waste your money.


Posted On: 2010-04-08 . View Related Posts . . View 6 Replies .

Updates For Ms Office Always Fail

The following updates continuously fail. Nothing i do seems to get them to install. Please help. This has been happening since may.

Security update for the 2007 ms office system (kb982312)

Sec. Upd. For ms office excel 2007 ( kb982308)
Sec. Upd. For ms office infopath 2007 (kb979441)
Sec. Upd. For ms office powerpoint 2007 (kb982158)
Sec. Upd. For ms office access 2007 (kb799440)
Sec. Upd. For ms office word 2007 (kb982135)

Security update for the 2007 ms office system (kb982331)
Update for ms office outlook 2007 junk email filter (kb2202131)


Posted On: 2010-07-25 . View Related Posts . . View 2 Replies .

Fail To Start After Update

I just installed the sp1 update for my computer for windows vista premium home ed. Everything installed with no problems, but when i rebooted my pc, windows wouldn't start. The only thing thats displaying is a black screen with windows error recovery across the top, then it states "windows fail to start. A recent hardware or software change might be the cause". I tried rebooting it in different modes but nothing. Then it says i should insert my os disk to try repairing it but thats not even starting. Is anyone else having this problem? This happened right after i installed the update.

Posted On: 2010-01-28 . View Related Posts . . View 3 Replies .

Bsod - Memory_management, Overclocking Fail

So i finished setting up my new custom computer with these items, p5p43td motherboard
4x2 ocz ddr3 pc3
Intel core 2 quad q8400
Windows 7 home premium x64
Geforce gtx 275 oc
 
So here is my problem. Every time i put all of my ram sticks in my motherboard, i always get the memory_management bsod randomly as i do any normal apps. I also sometimes get an over-clocking fail when i boot my computer ( i did not do any overclocking) and now i get this irql_not_less_or_equal bsod. At first, i thought it could be the ram since it was saying memory management and when i insert only 3 sticks everything is running fine.

After running the windows experience index, my 3d business and gaming performance was rated at 2. 0. The performance test also revealed very low fps in 3d graphics. I also have to add that i try every possible combinations with my ram slots and everything is working fine. I tried reinstalling the latest driver and now i get a 7-zip:data error.

So now im pretty desperate. I searched everywhere on google. Do i need to return the card to nvidia or is there a solution to this problem. Is the video card overclocked in some way that it goes in conflict with the ram? If so, where can i access the parameters to change the oc of the card.


Posted On: 2010-05-17 . View Related Posts . . View 4 Replies .

Program Upgrades And Installs Fail

I can install new programs but upgrades or reinstalls of programs i have previously used fail. The installation would not even start and the problem has occurred with random applications. Example: itunes, avira, skype (although i was able to install a really really old version of skype), driver updates. I have tried changing compatibility (as long as it allows me), run as administrator, even changed permissions b/c some failed installations would suggest this is the problem. Any suggestion is more than welcome!

Posted On: 2010-03-25 . View Related Posts . . View 4 Replies .

New User Accounts Fail Logon

I cannot get any new accounts that i set up to log in, they fail with the following message. "User profile service failed the logon. User profile cannot be loaded. "Happens with either new admin or standard accounts, my current admin and standard accounts still function. I got out my windows 7 (professional) disc and ran an "upgrade" hoping this would correct whichever file appears to be corrupted, but the issue still remains. I am trying to find a solution that does not involve a new or reformatted hard drive and complete reinstallation, but not to hopeful now. Never had this issue with years on nt and xp. Ny suggestions out there?

Posted On: 2010-08-19 . View Related Posts . . View 3 Replies .

Vista To Win7 Ultimate Upgrade Fail

I'm attempting to do an on-line upgrade from vista ultimate to windows 7 ultimate. The procedure took forever, and finally got to 83% of the final stage. The system went through another re-start and failed. It stated it is dumping physical memory to disk; attempts to restart; fails again and offers to restart in safe mode. I've tried to restart in normal and safe mode without success. It continues to loop through this and will not reset to either vista or win 7. Advice?

Posted On: 2010-08-05 . View Related Posts . . View 4 Replies .

Floppy Disk(s) Fail (40) Press F1 To Continue

I'm running windows 7 on a desktop system. Whenever i reboot the system, i receive an error message just after my desktop system loads its bios: "floppy disk(s) failed (40). Press f1 to continue. "

That is the entirety of the error message. The booting process never proceeds beyond that point, unless and until i press f1. I do not have any floppy disks on this desktop system; it is only a couple of years old (most manufacturers stop putting in floppy disks a long time ago).

Furthermore, this error message is quite recent: it only started about 3-4 weeks ago. Prior to that point, i had never seen such an error message before and windows 7 seemed to be operating properly (no problems). It was recently suggested that i update the bios to see if this might help the situation. The bios has indeed been updated, but the error message remains.


Posted On: 2010-01-29 . View Related Posts . . View 7 Replies .

Office Security Updates Continually Fail

T3 ms windows & office security updates continually fail as well as those from acrobat & apple quicktime. These updates (kb978380, kb978382 & kb979895) have repeatedly failed to install after being automatically downloaded. I've also manually downloaded these updates from the ms site, saved to the computer, and tried to install to no avail. Do i need to disable both the windows and mcafee firewalls? Please note that downloaded updates from acrobat for adobe reader and apple quicktime have also failed to install.

Coincidentally, i just discovered whild in the admin account that word now fails to save my docs - wonder if i should restore to an earlier point? Why does this continue to happen (as it has in the past)? I don't have a lot of computer savvy but after reading comments from others i am highly frustrated and bewildered with ms vista.


Posted On: 2010-04-13 . View Related Posts . . View 5 Replies .