Advertisements:




Error - Cannot Create System Shell Notification Icon


How do i correct the error of "led hotkey keyboard hpid09, cannot create system shell notification icon". I get the error on bootup of windows after password has been entered.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Wireless Notification Icon Disappeared

I have a problem with windows 7. It is a new laptop. After downloading the latest driver from toshiba, the wireless icon disappeared completely and was replaced with the hardwire icon with a red x through it. I tried 'customize' but there are no wireless icons to select. Is it a case that the hardwire icon for internet connection is at default now? How do i default it to the wireless icon, if this is the problem? I tried system restore and that didn't work either. I tried updating the drivers in the device manager and that didn't work either. I have wireless connection to the internet, no problems with that, but missing the icon, any ideas?

Posted On: 2010-01-06 . View Related Posts . . View 3 Replies .

Usb Error - Setup Was Unable To Create New System Partition

Cannot install windows 7 from usb error "setup was unable to create a new system partition". Windows 7 install o acer aspire 5100 gets wrong (maybe by ezback pro ii)so the problem is i want to install windows 7 (from usb, more details soon) but it gives me the error "setup was unable to  create a new system partition or locate an existing system partition.

See the setup log files for more information". I have flashed the bios because the freaking ezbackpro ii couldn't be uninstalled on vista. I formated all partitions and have now 1x 150 gb partition (even the oem partition. So angyr i am because the recovery tools didn't work. Now i want to install windows 7 and it just doesn't. Any help?


Posted On: 2010-08-06 . View Related Posts . . View 2 Replies .

Usb Install Error - Setup Was Unable To Create A New System Partition

I'm installing onto an hp mini 1035nr. My usb install key was created using the microsoft provided usb install creation program. When i try to install windows 7 i receive the following error: "setup was unable to create a new system partition". I then exited out of the install application and opened the command prompt in the installer. Using diskpart i can create partitions and format them. Using notepad i can write files. Thus i know the installer can read/write to this disk and create system partitions.

Posted On: 2009-12-11 . View Related Posts . . View 4 Replies .

How To Create Desktop Icon In Taskbar?

Since i use my computer for graphical production, i have most aero turned off so to not leak colors through to work area. On my xp laptop, there is a desktop icon that i can click to minimize all open windows together. This is very handy when i want to use something that is an icon on my desktop but does not warrant getting added to the task bar. How do i create this icon. I do not want the version that arrives by right clicking the windows explorer icon, i just want the actual desktop to come forward.

Posted On: 2010-08-07 . View Related Posts . . View 2 Replies .

System Icons In Notification Area

I have 1 system icon, "power", that is not showing in the notification area. When i go to "customize notification area" and click "turn system icons on or off", the"power" icon is off and grayed out. I searched and found others reporting the same problem and did the posted "accepted solution" which was located here:http://support.microsoft.com/kb/945011. I first did it step my step manually and when that did not fix it i rebooted and ran the automatic "fixit" which also did not work. Anyone have a fix for this?

Posted On: 2010-07-17 . View Related Posts . . View 3 Replies .

Create Taskbar Icon For Office 2007

I am trying to find a way to add or pin a taskbar icon in the windows 7 taskbar for the microsoft office 2007 home and student edition. I can pin the four individual program icons to the taskbar, word, excel, power-point and one note, but i can't pin the office 2007 folder containing all four program to the taskbar. I don't want to clutter up my taskbar with four icons when one could lead me to a window where i could pick the program i want.

Posted On: 2010-01-24 . View Related Posts . . View 3 Replies .

Disappear Desktop Icon After Create New User

I have a administrator  user with name ali . I use these user for 2 month. And i save several files in my desktop cause my desktop was busy i unchecked desktop/view/show desktop icon. Today i create a new user (administrator type) with name private in my win7 home premium. I log in private and i try to access to my ali desktop folder from it. When i click on ali's desktop folder on c:/users/ali/ the desktop folder was disappear.

I try to use address bar by typing c:/users/ali/desktop to access ali's desktop folder in private user. And error appear (does not exist ). Now i log on in ali's user and my desktop was disappear. Recycle bin icon is appear. I dont know why my desktop files is deleted. I test desktop/view/show desktop icon but my desktop files was not appear my windows is original on my notebook sony vaio f115fm. I have very vital files on my dektop. Help me!


Posted On: 2010-08-07 . View Related Posts . . View 2 Replies .

System Event Notification Service Message

For the last 3 weeks when i turn my laptop on i get the message "windows could not connect to the system event notification service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the system event log for details about why the service didn't respond. " The message disappears once i start using the laptop.

This message started appearing after a windows update, but it is not possible to do a system restore to undue that update any more. I don't have any other user accounts and i am running windows 7. As suggested by a moderator on this site, i opened cmd as an administrator, typed "netsh winsock reset" in the command prompt shell and, after it was accepted, re-started the computer. However, the message still appears. Does anybody have any other advice to get rid of this annoying message?


Posted On: 2010-04-08 . View Related Posts . . View 8 Replies .

Cannot Create A System Repair Disc

We have had this problem since first boot.

After
Start->maintenance->backup and restore->create a system repair disc , a grayed out dialog window comes up with "create a system repair disc" as title, but is immediately covered by another dialog window that says: microsoft windows repair disc has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

There is a choice of "debug" or "close window". Debug leads to the same dialog window without the choice of "debug" and "close. " Closes both dialog windows.

This activity will create errors in the event viewer but there is no information. The event id, source, and log fields are "-". Using recdisc.exe produces the same result. It does not matter if there is media in the drive or not. Re-booting does not help. Device manager says the matshita dvd-ram uj892as dvd drive is ok. The drive plays music and movies fine. Any clues?


Posted On: 2010-01-07 . View Related Posts . . View 6 Replies .

Create System Image Failed

Upgraded windows 7 home premium to ultimate using anytime upgrade. Tried to create system image on a second hard drive, and it failed with a message about not having enough disk space on the destination drive. Before starting the backup, i got a message that about 27gb would be needed. There is over 100gb of free space on the second hard drive. Tried again, this time saving to my networked shared drive, also with over 100gb free space. Same failure message. The system c: drive shows 52. 1gb free of 74. 4gb

Posted On: 2010-04-15 . View Related Posts . . View 3 Replies .

Unable To Create The System Image

I have two acer slimline towers. One almost one year, the other just two weeks. I thought that finally i shoud create a system image. So far i was lucky and haven't lost anything but after the purchase of the second acer i became a little more concerned.

I purchased iomega 1tb external drive ntfs and tried to create the system image. On the older comp. I receive a message that the harddrive has not enough free space for creating the system image. The 1tb drive is empty. The newer comp. Will not even let me go to the same point. It tells me that "windows 7 backup stopped working". The next message gives me a choice to cancel or debug but nothing happens anyway. From reading several non-microsoft forums i assume that this is a serious problem and my concern is who will give me new windows if i loose the content of one or both of my computers when there is no longer hard copy of windows supplied. One comp is 32bit, the other is 64bit. Both have w& professional upgrade.

If i may add another question, the newer comp, the 64bit doesn't shut off properly. It takes 4 minutes at least. The older one with much more stuff in it shuts off immediately. I tried to stop services and startup programs but it doesn't help.


Posted On: 2010-04-18 . View Related Posts . . View 12 Replies .

How To Create More System Restore Points ?

How do i create more system restore points? I needed to do a system restore to correct an issue i was having. Looking through the list of available restore points, the list only went back 14 days. Is there a setting i can change to have restore points be available for a month or so?

Posted On: 2010-02-26 . View Related Posts . . View 7 Replies .

Can't Create A System Image Of Win 7

Objective: create a system image of win7(64bit)tools: built in windows backup & restore tools.

          Wd-1tb(where win7 resides)primary drive
          Wd-750gb(where the image will reside)slave

Issues: when trying to create the system image of win7, the total size is 56gb which will be saved on the 750gb drive that has nothing on it. Now windows decided that the 750gb drive does not have enough space. Anyone has the same problem or knows what's wrong with windows 7,


Posted On: 2010-08-15 . View Related Posts . . View 6 Replies .

How To Create Bootable System Repair Disk On Usb ?

How can i create a bootable version of a "system repair disk" on my hard disk drives or on a usb stick?
 
Explanations/why i ask the question: i have ordered a pc that will come with the 64 bit version of windows 7 ultimate and with 3 hard disks. My pc manufacturer/assembler told me, that they do not install bootable recovery partitions on the hard disk drives of their pcs.

Therefore, when i will eventually need to restore my system with the windows 7 "system image recovery" tool to the state of a previously created system image, i will need to use a system repair disc (that i have previously created on a dvd) to boot the "system image recovery" tool.

In principle, this seems to be sufficient, because it is hopefully relatively seldom that i will need to restore my c partition to a previous state (in the past, i did this mainly when participating in a software beta programs in order to restore my pc to the "clean and reliable" state prior to the installation of the unreliable beta-software).
 
I am however concerned about becoming dependent for the restore of a system image on a properly functioning dvd drive (they seem to be less reliable than, for example, hard disk drives). It would be a severe problem for me, to detect at the time of an attempted system restore, that my dvd drive is not functioning anymore.
 
Therefore, i would like to know if and how, i could reliably create for windows 7 ultimate (64 bit) a bootable version of a "system repair disk" on one of my internal hard disks or on an externally attached  usb disk or usb stick. I will appreciate to get a description (or to be pointed to a description) that a regular windows user can understand (i am not a pc system programmer and i am not familiar at all with things like the registry or sdks)


Posted On: 2009-12-12 . View Related Posts . . View 4 Replies .

Unable To Create System Image In Win 7 64-bit

I can not create a system image of my entire system and store the image on another hard-drive. I always get in internal error '0x80070424. I attempts to detect my other drives(also tried plugging in an external hdd) the i get presented with the internal error message. I don't under stand why i have just done a clean install.

The installation went with out a hitch.

System
Mobo' gigabyte x48t-dq6 with latest bios installed.
Core 2 duo quad core extrime  2. 6ghz cpu.
4gb ddr3 ram.
3* 500gb & 1* 1tb hdd's
Xfx gforce 295 1. 7gb ram
Xfi-platinum ed sound card
Standard dvd-rw


Posted On: 2010-01-09 . View Related Posts . . View 2 Replies .

Unable To Create A System Image On External Drive

In "backup and restore" i opt for create a system image. A dialog box pops up with the following error message: the backup application could not start due to an internal error. Server execution failed (0x80080005)  it should be noted that i performed a system backup to the same external drive earlier this morning and it appeared to be successful. I am doing all of this backing up because i am getting the blue screen and plan to try geek squad on line to help me with it. Want to be backed up first.

Posted On: 2010-06-07 . View Related Posts . . View 3 Replies .

Backup Create System Image On External / Network Drive

I am running windows 7 home premium 64bit and i have 2 internal hdds plus a networked windows home server. When i go to backup and select create system image i am only shown the option of backing up the system drive (c drive) and not the other hdd (d drive). And as destination for the backup of the system drive i am presented with no option other than the d drive. I am not shown the option of an external drive or the whs network drive. Apparently the option of an external or network drive should be available as long as they are ntfs formatted.could it be that these options are not available for the home premium edition?

Posted On: 2010-06-26 . View Related Posts . . View 5 Replies .

System Fonts Small After Icon Size Increase

I decided that i wanted to increase the size of my desktop icons. I held down ctrl and used the mouse wheel to increase the sizes. I also increased the text size in display properties from 100% to 125%. After doing this i logged off then on again to see my changes. I found that the system text was far too big to be a comfortable viewing size. I went back to display properties and i changed the font size from 125% to 100% (the default). When i logged off and on again, the text of the system it was incredibly tiny. It looks like the text size is like 8 or even 6pt. I tried looking the control panel to see if there was anything i can do, but i cant find anything.

Posted On: 2010-07-22 . View Related Posts . . View 2 Replies .

Error - Notification Dll Is Not Available, Program Will Not Work Correctly

I receive this error when i start up windows 7: "notification dll is not available, program will not work correctly" the title of the error window references wireless issue (which dell confirmed). My wireless works okay, but dell was unable do anything about the error. Uninstalling and reinstalling wireless drivers did not help. Dell says a complete reinstall of windows 7 is the only solution, which i really do not want to do. I'm hoping there is a simple fix. Any solutions?

Posted On: 2010-02-11 . View Related Posts . . View 3 Replies .

Cannot Recreate Downloads Shell Folder

I have moved many of my shell folders to an alternative location. This has been successful for most, but something went wrong with the downloads folder. I do have a folder containing my downloads (d:jake's documents downloads) and i have pointed the relevant registry key to its location:

Hkey_current_usersoftwaremicrosoftwindowscurrentversionexplorershell folders{374de290-123f-4565-9164-39c4925e467b}

. But windows explorer doesn't seem to create the shell folder.


Posted On: 2010-03-01 . View Related Posts . . View 2 Replies .

Shell Common Dll Issue

I'm having an issue with sounds in windows explorer, solitaire and testing sounds in "speakers and headphones". For solitaire: this has happened on an off when loading solitaire (that it started up or not). Now when i try to load it, it says "loading resources. " But becomes unresponsive and i have to force it closed.

For windows explorer: when shutting down windows 7 i get a message that it's waiting for the
Ending or closing "sound bite" to play and i have to do a force closure. For the "speakers and headphones": i'm not getting any sounds at all when i test the different sound bites. I've gotten a message about a problem with the windows shell common dll file. I ran the system file checker, sfc.exe, and came up empty. Any thoughts on how to proceed with a fix?


Posted On: 2010-02-09 . View Related Posts . . View 4 Replies .

Cannot Print From Win 7 Shell Or Apps

I have an hp printer that is networked and published in ad. I have one win7 machine that cannot print to it (others can with no issues. ) If i try to print an email from outlook, for example, the "sending" dialog box comes up, and then i get an "explorer.exe" has stopped as it generates the error file. If i print from notepad, i get the same behavior except this time it is notepad.exe. I check the app crash logs, but there is no faulting module listed. So far i have deleted all of the printers, drivers, ports and recreate them all, no change.

If i attach to the win 7 machine from a different one, and install the printer remotely, i can successfully print a test page so i am beginning to think it is not the print subsystem, per se, but something that sits between the app layer and the print system. But i am not sure what that would be. The only difference between this machine and the other win7 machines in our initial pilot group is that this machine was refreshed from xp using hard link migration in the mdt. The others were "clean" installs. I am not sure if it is even relevant, as usmt does not migrate printers, as far as i know.


Posted On: 2010-08-20 . View Related Posts . . View 2 Replies .

Error - Could Not Create The Paperport Link Bar Control

My visioneer 8700 scanner worked o. K. Under xp, service pack 3, but after loading into my new computer under windows 7 & trying compatibility mode program fails to start! On trying to start the program. Error msg "could not create the paper port link bar control". Have tried several iterations of the compatibility mode options-all fail.

Posted On: 2009-11-09 . View Related Posts . . View 2 Replies .

Error - Automation Server Can't Create Object

Since the latest windows update, i have not been able to open any links, they just open a blank page that says it is going to the correct address but the address bar is empty. I have to manually type it in, and then it works. I can't even print a page because that gets an error and then nothing happens whether i hit yes or no:

An error has occurred in the script on this page.
Line: 291
Char: 1
Error: automation server can't create object
Code: 0
Url: res://ieframe.dll/preview.js


Posted On: 2010-02-18 . View Related Posts . . View 2 Replies .

Error - Backup Failed To Create To Shadow Copy

I have a seagate freeagent xtream connected to usb port. Ran the first backup and it completed successfully. The next scheduled backup failed as well as all attempts to start backup. The message is :backup failed to create to shadow copy on the storage location. Details: the specified object was not found. Error code: 0c80780034 i deleted the backup image on the drive and tried again . No luck. The drive has plenty of space. I can't find on the internet anyone with this problem.

Posted On: 2010-06-11 . View Related Posts . . View 3 Replies .

Error Code: 0x80070570 - Cannot Create / Delete Folder

Trying to upgrade from vista on an hp dv6408nr. Dual boot using grub from a boot partition. Linux and vista boot fine. Part way through an upgrade a black error screen opened and closed before i managed to read it. Now i keep getting the following error message: windows was unable to create required installation folder f:$windows. ~Bt. An existing file or folder of this name could not be deleted.

Error code: 0x80070570

I am unable to find the f: drive to manually delete the file, and a search does not locate any file with that name.


Posted On: 2010-05-15 . View Related Posts . . View 3 Replies .

Security Alert Notification

When i turned on my computer i received a "security center alert" when i pressed enable nothing happened. I checked all my security settings everything was set on off the alert would not allow me to change the settings when i did a scan of the computer everything is said to be okay but the "security alert center" keep popping up (5 times while writing this question) what should i be doing? Please help the name of the problem is trojan. Win32 it's listed as high risk it's a windows pe exe  file of approximately 29kb worm packed using fsg.

Posted On: 2010-01-06 . View Related Posts . . View 2 Replies .

Automatic Update Notification Of Old Updates

I reinstalled xp professional and office 2003, then retrieved what i thought was all the updates. My system shows that i have sp3 for both. I received an automatic update notice this week that included approx. 26 updates for office 2003, office 2007 related to compatibility and others. When i go to the link for many of them, they have a publish date in 2008. Ironically i did the reinstall in december of 2009.

I don't appear to have these fixes/updates when i look at add/remove programs but my question is why am i just now getting these updates.


Posted On: 2010-01-21 . View Related Posts . . View 4 Replies .

Live Mail Issue With Notification Of New Messages

How to make windows live mail notify of new messages continuously & stay in notification area upon program close. Windows live mail can sound a new mail alert, but only once. It can also be in the notification area / taskbar, but does not continue to notify. I would like continuous notification because when i step away and come back, i won't know unless i manually open the program whether i got new mail. I would also like to have it remain in the notification area even if i close the program.

Posted On: 2010-04-07 . View Related Posts . . View 13 Replies .