Advertisements:




Samsung C630 Tv As Monitor


I just bought a samsung 32" 630 series 780p tv. It has a pc port built in. Will it be an adequate "large" monitor for ms flight sim gold?á Vista os.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Samsung Ml-1610 Driver For Win7

I just buy an lase printer samsung ml-1610, i try to install drivers for printer, vista, xp, win 98, 2000, all range, no one is working with windows 7, my printer does not work. Where i can find a driver for this printer? On the website of samsung i did not find any driver to work it out withá windows 7. I also setup to run compatibility option to be compatible with all operating system from windows and no one want to work it, in administrator mode too, no result.

I try the printer on xp, vista and win 98 and is work but not under windows 7. What can i do? I don't want to use xp, vista, i want to use the printer on windows 7 and i must find an driver to work with windows 7. Does exist any setup to make it work on windows 7 the printer samsung ml-1610?
The picture of the erro (print screen) you can see at: http://www.Flickr.com/photos/33493691@n02/?Saved=1 please don't send me at samsung drivers webpage, they don't have an solution for this issue!


Posted On: 2009-10-01 . View Related Posts . . View 5 Replies .

Samsung Ml-1710 Printer With 64-bit

I just received a new computer with windows 7 64-bit. I installed my samsung ml-1710 laser printer using the "windows 7" driver on the samsung website, as recommended by microsoft. After doing so, i was able to print the test page, and all networked windows xp machines print with no problems.

The problem is that my windows 7 machine, to which the printer is connected via usb, will print the first time, but i have to cycle the ac on the printer to print additional documents. Anything after the first document just sits in the print queue for a few minutes and then disappears.

I'm relatively sure this is a samsung driver problem. Has anyone encountered or worked around this?


Posted On: 2010-02-14 . View Related Posts . . View 9 Replies .

Bsod After Connecting Samsung Syncmaster Tv

My computer crashes anywhere between 5-7 times a day. I am running an inspiron 1525 laptop
4 gb ram, 2. 4ghz processor (duel). I currently have windows 7 installed. I have been having this problem for the last 2 months. Before you assume its a virus or anything of that sort, let me promise you its not. I have a bsod log that is a mile long, and i have tried my best to debug and figure out the problem. I cant. My computer is connected into a samsung syncmaster t260hd tv. The problem began once i began using this tv/pc monitor.

I have narrowed the problem down to the monitor. Whenever its plugged in and i am watching a video on my pc through the internet, the computer will randomly crash. It happens every once and a while when i am not watching a movie, but at a ratio of 9:1. This is not a problem with dells hardware. Nothing is broken. All drivers are up-to-date. I am tech-savy enough to have tried every update from dell, intel, microsoft, and samsung.


Posted On: 2010-03-31 . View Related Posts . . View 2 Replies .

Samsung Wep500 Bluetooth Headset Drivers

Trying to get samsung wep500 blue-tooth headset to work with windows 7 , pls provide link to drivers and getting it to work. Been trying to get bluetooth samsung wep500 to work with windows 7 anyone can advise?

Posted On: 2010-03-29 . View Related Posts . . View 2 Replies .

Samsung Ml-2150 Printer Driver Problem

Win7-64 won't install samsung ml-2150 series 64-bit printer driver to that printer on ethernet; keeps trying to install on usb.

1. New win7-64bit installation.
2. Samsung ml-2151n printer ; correct 64bit ml-2150 downloaded from samsung.com
3. Printer connected to the win7 cpu via usb: driver installs and printer works fine
4. Printer's nic on the ethernet lan (which always worked on winxp32bit) is found by browser on the win7 computer and will print a test page or otherwise control the printer as would be normal.
5. However, win 7 doesn't show the network printer in the printers/devices window
6. Add printer doesn't work; reverts to the driver that operates only via usb (grayed out when the usb cable is unplugged, which is how i'm trying to set things up).
7. Add port adds the tcp/ip port name of the printer in hex, as shown in the printer's test page printout.
8. Add printer still doesn't work.
9. Samsung won't support me since the printer is out of warranty (duh, it works fine for past 6 years, it's their stupid driver, or what?). They consider installing an old printer on a new os using their newly published driver to be a warranty issue that they won't support. Huh?
10.network is "trusted". Subnet is the same. No difference if win7 is running as homegroup or workgroup. Norton internet security is installed and doesn't give error message; see #4, above.

My question: how do i install and run this beast as a network printer so i can move it out of my office?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .

Samsung Hd502hj Hard Drive Fault Reports

I have 2 samsung hd502hj drives on my system. One is only 2 weeks old, and the other is only 8 weeks old. After my system has been running for a few hours i get a message saying that both disks are faulty. This message is then repeated every 15 minutes. However, if i restart my system as soon as the fault message appears, several hours passes before i get another fault message. If there a bug in the disk checking system.

Note. The fault messages for the newest disk started within a few hours of installation


Posted On: 2009-12-20 . View Related Posts . . View 2 Replies .

Samsung External Dvd Se-s084c Driver Issue

Samsung external dvd se-s084c worked fine with my win 7 machine (acer timeline as3810t) for a month or so. Then suddenly system stopped recognizing it. Troubleshoot found that driver service is disabled. I was unable to enable it, even if i went through disable-enable and remove-install routines as suggested on microsoft site. Recommended action was to update the driver. However, when i run update driver service, win troubleshooter claims that driver is up to date and no action is needed. Anyone has idea what to do and how to enable the driver on my machine?I suspect that driver stooped functioning after one of win 7 regular on-line updates, but i cannot tell which one. Se-s084c works without problem with my old laptop running win xp.

Posted On: 2010-08-21 . View Related Posts . . View 2 Replies .

Samsung Np-r519 Keyboard Key " And @ Wrong

I need to change the " button to be @, and visa versa, the laptop is a samsung np-r519 running on windows 7.

Posted On: 2010-03-03 . View Related Posts . . View 2 Replies .

Samsung Omnia I900 Drivers Fails To Install

I've been trying to setup my samsung omnia (i900) on windows 7 ultimate x86 rtm but the driver keeps failing to install. The phone used to work on both the beta and rc releases of windows 7 however it's not working with rtm which is odd. I've tried googling this endlessly but i've yet to find a solution that works.

Posted On: 2009-10-26 . View Related Posts . . View 3 Replies .

Syncing Samsung Intrepid Cell Phone Using Macbook

I have a macbook computer and i just purchased a samsung intrepid cell which use windows 6. 5. I wanted to sync it with my computer but they are not compatible. I cannot even download the free downloads from the windows website on my computer - it just will not accept it. I don't know what to do, do i have to start buying all this software to connect them? I would love to sync them and i would love to get some of the free downloads, how can i do this without spending a fortune? If i could not sync them i guess that would be okay but i would really like the downloads. Does anyone have any suggestions?

Posted On: 2010-04-09 . View Related Posts . . View 2 Replies .

Samsung Ml-1430 Printer Driver Software Wont Install

Samsung ml-1430 printer driver win7x64 software won't install; can't find working driver-same with samsung dvd r/w. I quite vista (32 bit) when i had an infinity of problems getting hardware and software to work (goodbye to all that $$$), now i've tried win7x64 bit and i have worse problems!á I'm getting tired of this. I may junk it all and just install xp (again) after another ms or samsung failure to make sure hardware and sw works.

I can't figure out how to make the compatibility mode work and so much more won't work. I have a 3 ghz core 2 duo e8500, 4 gigs of memory, sata ii 500 gb hard drives, decent 8800 gt's video, so it's not a slow system. I just don't get it. If i could run rfactor on a mac i would get one just to avoid the last 3 years of headaches.


Posted On: 2010-06-30 . View Related Posts . . View 2 Replies .

Dual Monitor Problem - 2nd Monitor Detected Black

Ok, so i have a dell that was runningávista and two monitors. When i upgraded to windows 7 pro i ran into the infamous black screen problem and fixed it. However, i only fixed my main monitor. When i open the display window, both of my monitors are detected but my secondary monitor shows a black screen andáthe monitor itselfásays there is no signal detected from my pc.

The strange thing isámy pc thinks its working (i can drag a window from my working monitor towards the black one and it moves out of my working monitor into the black screen). I currently have both of them plugged in using a dvi to vga splitter and i have also updated the drivers by clicking the "update driver" button in the monitor properties window. Please help if you can!


Posted On: 2009-12-03 . View Related Posts . . View 4 Replies .

Cannot Move Windows From One Monitor To Other - Dual Monitor Setup

I have two monitors of the same resolution connected to an ati radeon hd 4300/4500 video card. In windows 7 extended mode i see a full working desktop on one monitor, but only the background picture on the other - the four-square flag motif again a blue background with wispy lines, butterfly etc.

No taskbar, icons or anything else. On one occasion briefly the mouse cursor appeared on it instead of on the full desktop image. If i try to drag a window on to the second monitor it won't go there. The settings are landscape with two mointors "1" and "2". I have two images but how can i use the second one?


Posted On: 2010-02-10 . View Related Posts . . View 4 Replies .

Can't Get Monitor To Go To Sleep

Can't get monitor to go to sleep after screen saver runs. Using a wireless keyboard and mouse.

Posted On: 2010-01-28 . View Related Posts . . View 2 Replies .

Tv As 2nd Monitor

I have installed ge force 8400 gs then upgraded to windows 7; have settings of graphics card as 2 separate monitors; s-video cable to tv;áwill runásame program on both or 1;ámonitor is nowáprimary; tv has only background and gadgets; no task-bar or access to programs;ácan i run program on monitor and 2nd program on tvá i.e video on tv and home finance on monitor? If so, how?áOn board intel graphics controller disabled. Dell 4600;á

Posted On: 2010-02-14 . View Related Posts . . View 2 Replies .

Monitor Resolution

I have purchased a legitimate windows 7 copy. No matter how i install it it wrecks my monitor resolution. This is not a cheap old monitor, it's a fairly new one. Right now i use again vista and everything seems normal. But when i install windows 7 the maximum resolution it gives me is 640x480. It's really annoying.

Posted On: 2009-10-31 . View Related Posts . . View 2 Replies .

Monitor Will Just Go Blank

I have an issue where my monitor will just go blank. The computer is running but no display. My first thought was that this is a display adapter/video driver issue but i not longer think so. Let me explain. My set up is a hp m9040n running windows 7 ultimate x64. I have a nvidia 9600 gso card that is less than 6 months old and use a samsung syncmaster t240 monitor.

This first started happening about one month ago right after i upgraded my video card driver to the latest version. I would be away from the computer for awhile and when i came back no amount of mouse shaking would bring the screen on. At that point a hard shut down and boot up would bring things back.

Thursday it got worse. Hard shut downs would not bring anything back but i would see the bios startup screen so obviously the monitor and display adapter has some output. I started in safe-mode and installed that latest driver from the nvidia website. No difference, in fact it appears to be the same driver that windows update put out.

My next step was to roll back my driver to the one that came with my video card. This kind of works. There are new symptoms now. Now what happens is that after working for awhile i would hear the usual kind of insert/disconnect sound (like plugging in a usb device) and then the screen resolution would change from 1920x1200 to 1024x768. For some reason the monitor according to the screen resolution control would go from my monitor to a generic. If i click on the detect button, the screen will blank out and once again i have to do a hard shut down. The hard shut down followed by a boot in safe mode and and reboot restores things to normal.


Posted On: 2010-03-13 . View Related Posts . . View 5 Replies .

Dual Monitor

Is there any option available with using dual monitor in aá"stretched" view instead of extended? What i'm trying to do is run 1 application over my 2 monitors in full screen mode. So far i haven't found anything that would make this possible. I can extend and i can enlarge a window over 2 monitors but i can't really use a resolution of ~3200 * 1050 for example. This was possible under xp but neither vista or windows 7 i can get this to work.

I've tried searching the forums but alas i have not found an answer for this. If someone can find a topic already covering this sorry for double posting. But mostly i found extending and not really stretching it over 2 screens.


Posted On: 2009-07-10 . View Related Posts . . View 2 Replies .

Problem With Monitor

Well i am not sure if monitor is the cause of the problem. Ok listená every time(but not always)ái start my computer after windows startupá i see my desktop andáafter 1-2 minutes(not more) my screen display goes black or white or grey. The computer and the screen are still working but no response. I dont even see the cursor. I restart my computer and after everything is fine. It never happens again. But the next day it happens again!

My graphics card is ati radeon 5770, my os is windows 7 64 bit and my screen is lg monitor-tv m227wd. Refresh rate is 60hz and resolution is 192x1080. The first 1-2 days i used the computer that problem didnt appear. So it makes me think that maybe i downloaded something that causes this problem(a programme)áor its a hardware problem? I have updated the graphics drivers and also i have all the microsoft updates.


Posted On: 2009-12-02 . View Related Posts . . View 3 Replies .

Monitor Out Of Range

I installed windows 7 which was ok apart from the fact that my monitor ácould only display large icons. Then windows told me a better driver was available for my monitor. I installed this. Now the screen just says out of range. Since i cant get past this i cant uninstall the driver.
á
Ive tried booting from the cd i just get the message cannot boot form cd.code 5, ive tried three other monitors. Same result. To all intents and purposes i have no computer.


Posted On: 2010-03-18 . View Related Posts . . View 2 Replies .

Monitor Shuts Off

My computer monitor keeps shutting off on me. I have a dell inspiron b130 (i know it is kinda old) but i don't think its a hardware issue. It has started happening since i installed windows 7. At first i thought it was because my original product key didn't work, but i did the automated phone activation, and validated on the website, but it still shuts off. If i don't use my computer for awhile, it may stay on for a good 20 mins or so, but once it shuts off once, the time it stays on gets less and less. But, i just close the lid and open it back up and it works again. Any ideas as to what is going on?!?

Posted On: 2010-03-28 . View Related Posts . . View 2 Replies .

Dual Monitor Help

Dell couldn't seem to solve my problem, so i'm desperately in need of help. I have a dell inspiron 580, i3 processors. The machine has one vga output, and hdmi. I want to run two monitors, so dell informed me to buy a second vid card. I did, installed a raedon jd2600 pro 512mb with two dvi connections and one dvi adapter. I hooked both monitors up, and it will either run one monitor on the ati card, or one on the intel card, but i cannot extend the display. I was on the dell support line for over an hour, andá they told me to just go buy another dvi adapter and plug it in. So if that's true, i cant run two cards?

Posted On: 2010-03-31 . View Related Posts . . View 2 Replies .

Cannot Get Second Monitor To Work

I am connecting a second monitor to my sony vaio-vgn-sz650n-by vga. Before upgrading from vista to 7, it was working just fine. After upgrading, i plug it in, screen blinks, but no display on second monitor. It is a dell g2210 by the way. I tried restarting my computer with monitor connected, without it connected, and went into the display settings where you can change resolution, etc. On the different monitors, and nothing there. Tried to "detect" monitor, still nothing. Tried updating the driver, nothing(maybe wrong driver?). I would love to get this problem solved as school is starting and i need to use my computer a lot, and really like having dual monitors.

Posted On: 2010-08-25 . View Related Posts . . View 4 Replies .

Two Installations For Same Monitor

I recently installed windowsá7 replacing vista on my hp pavillion. After some difficulty which required a denovo installation versus an upgrade, i managed to get windows 7 functioning. However, when playing a game (cod waw, etc) if i get killed and the game restarts, there is a 4-10 sec delay in the screen returning to the game scene. I can hear the sound immediately but the video lags. When i look at the control panel =>ámonitors, it shows that the monitor is installed twice. How do i remove one of the installations?

Posted On: 2009-12-28 . View Related Posts . . View 3 Replies .

Hooking Tv Up As A Monitor

I have tried everything. I have gone to nvidia and got the updates for 7. I have a pavilion slimline s7600n i have a outdated graphics card, nvidia geforce 6150 le gpu. I cant even upgrade it. I don't think thats the reason my tv is not recognized. I had it hooked up when i had xp and it worked just fine. I think that windows 7 thinks i am trying to hook up two monitors. I just want this to work the tv has the same resolution as the hpv15 monitor but it wont work.

I have been at this all day. Please help i can get it to come on for a second, but the computer quickly reboots. I have to plug the hpv15 monitor back in to get reception. It says had to reboot or something of that nature because it found new hardware. I can find a generic monitor but i cannot make it the primary monitor. Any one anything this post has been here for 45 minutes and nothing


Posted On: 2009-12-01 . View Related Posts . . View 3 Replies .

Error - Out Of Range - Monitor

"out of range" error appears on my monitor right before logging screen. Have this quite annoying little bug, when i boot up windows 7 it starts loading then suddenly my monitor will just go black and a "out of range" error will pop up. I've tried everything i know to fix this, logged in safe-mode and updated all my graphic drivers and still no luck. Currently in safe-mode as we speak. I believe it's something to do with my resolution, graphics card. I have a nvidia 9600 gs.

Posted On: 2009-10-24 . View Related Posts . . View 8 Replies .

Monitor Goes To Sleep, Will Not Come Back

I have just installed windows 7 home premium upgrade from windows vista home premium. Now when my monitor goes to sleep, it will not come back on when the computer restarts. Why? My monitor will not come back on when i restart the computer after entering sleep mode.

Posted On: 2009-12-29 . View Related Posts . . View 2 Replies .

Multi Monitor Spanning

I put this under hardware and drivers because it pertains to the functionality of windows with hardware, more specifically video cards and monitors. We in the it department are evaluating windows 7 currently (skipped vista because of functional needs)áand in our tests we came across this problem. Granted we can drag the windows open across the monitors or manually set the window size, but this to us is an extreme problem as we would have to instruct all of those users on how they can achieve this goal.

Why is this an issue?We have a good number of people and workstations/laptops (well over 5, 000 currently). All of these use excell and about 30% use visio. Currently in xp, when a spreadsheet/document is opened (more for excel spreadsheets) the user double clicks the top window bar to maximize it and it fills both monitors (no need to drag it open or set the window resolution). This function is not available in later operating systems as i have found out. I actually have two questions, and though i doubt i will receive a cognizant answer, i will ask them.

1 " why was this feature removed from later productions?

2 " is there an effort to re-institute this feature in later windows versions?

I know windows vista/7 (as i read) will not have this ability, but i need to know if this will become part of the next generation. As it is i will have a very hard time explaining this to people that use our board room with 2 x 2 displays on the wall without having to expend more money for something that was at one time a featureŁ of the windows environment.


Posted On: 2010-07-07 . View Related Posts . . View 4 Replies .

Monitor Wont Wake Up

I installed windows 7 a week ago and my computer would go to sleep properly (ie: one click of the power button and everything was up and running on the desktop). In the last few days however, my monitor will not wake up. Just stays off and the status light is blinking like it is not communicating with my pc. The only way to get it running is by manually powering down on the pc tower. Not sure if i changed a setting but have checked power settings and they seem to be what they were when everything was fine.

Posted On: 2009-11-03 . View Related Posts . . View 2 Replies .