Advertisements:




Unknown Device Intel Ich10 Lpc Interface Controller - 3a18


Unknown device in device manager in windows 7 64. Fresh windows 7 64 professional install directly to a formatted hard drive. Using an asus p5ql-em main board with an intel e7400 core2 duo 2. 8ghz, 4g ram, ide hard drive, ide burner, keyboard, mouse, radeon hd4870 and that's it. No other devices.

Go into device manager and there is one unknown device: "on intel(r) ich10 lpc interface controller - 3a18" when viewing devices by connection in device manager, the path to the device is: home pc/microsoft acpi-compliant system/pci bus/intel(r) ich10 lpc interface controller - 3a18/unknown device

The full device list under intel(r) ich10 lpc interface controller - 3a18 is:
Direct memory access controller
High precision event timer
Inter(r) 82802 firmware hub device
Numeric data processor
Programmable interrupt controller
System cmos/real time clock
System speaker
Unknown device

Have tried about 6 drivers for this, from asus and intel, nothing installs and solves the problem. Tried both setup.exe and manual driver installation methods.


View Full Post With 4 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Error - Unknown Device - Usb Does Not Recognize Garmin Device

Just recently, windows 7 home premium addition has stopped detecting my garmin device. Other usb devices such as my ipod work fine. I was able to get it to detect the garmin only a few times, it would try to install the drivers but the drivers would fail to install. The garmin was working a few weeks ago. Below is a list of everything i have already tried:

Rebooting (after everything i try)
- Turning the computer off and leaving it unplugged overnight
- Completely uninstalling all drivers and software associated with the gamin.
- Manually installing drivers
- Uninstalling the unknown device and doing a search for new hardware
- Uninstalling the unknown device and doing a search for legacy hardware (this produces a device not functioning (code 10) error)
- Reverting back to a restore point before the last windows update

Please, any help would be very appreciated. I am decently computer savvy and have always been able to fix any problems that i have. This one has had me spinning my wheels for days.


Posted On: 2010-03-17 . View Related Posts . . View 2 Replies .

Intel Usb Host Controller Drivers

I installed windows 7 on an ibm thinkpad t41 laptop. I realize that this is an older laptop and is not the best choice for windows 7. However, i first installed the rc release on it (a little while back) and everything (except for areo, etc) worked just fine. Now, with this new fully licensed copy of 7, the drivers for the usb host controller are not loading correctly. They appear to be present, but they are not working. In device manager, there is a yellow ! Next to each entry under usb, and inserting a usb drive produces nothing.

I first asked intel about it. They said it is a microsoft issue. They said they manufacture the host controller, but microsoft makes the drivers. This is an intel 82801db/dbm enhanced usb host controller and there are 4 or 5 similar entries for it under usb in device manager.

I don't know why it would work without issue when using the rc and not this new installation. I have disabled, and completely removed the device/drivers from within device manager and rebooted to allow windows to reload the device(s)/driver(s) but that didn't help. I have tried downloading driver installations from intel and that also did nothing for me. I have checked windows update several times manually, and using the update driver button tells me "windows has determined i have the most current drivers".


Posted On: 2010-03-05 . View Related Posts . . View 10 Replies .

Device Driver Not Installed For Unknown Device

After upgrading my various computers to windows 7 home premium, i am now getting the small yellow triangle icon on the computer icon in the devices and printer screen. After running the troubleshooter from the context menu the result indicates there is no device driver for an unknown device. Also in device manager under other devices there is an unknown device with no driver. How can i resolve this issue when i don't know what the device is?

Posted On: 2010-03-16 . View Related Posts . . View 5 Replies .

Mpc / Vlc Freeze / Intel Matrix Raid Controller

I'm running windows 7 x64 with latest x64 versions of vlc & media player classic hc. Every so often when playing video files with either, my system will lock up. If something like music or another video is playing in the background i can still hear it but my screen is completely frozen - mouse and keyboard do nothing. The only way out is to cut power.

I came across this post (http://social. Answers.microsoft.com/forums/en-us/w7pictures/thread/d5cd90f8-edda-46fb-aca7-fd9834f728e5) which seems to assign blame to the intel matrix storage controller which i am using to control my raid-1 array. This thread doesn't really seem to have a fix for the problem, short of using a different player, or an explanation as to why it happens.


Posted On: 2010-03-27 . View Related Posts . . View 2 Replies .

Unknown Device Driver

I recently upgraded vista hp 32 bit to win7 32 bit. When my laptop boots it start searching and trying installing some driver. It keep on installing unknown device. I don't know how to stop the process on installing unknown device, so i shutdown my laptop. When  restart, i could see many unknown device in device manger under "others".

When i scan manually i could not find any device. After deleting all the unknown driver. I again scan manually for device, again i could not find any. When i restart my laptop, it again start searching and keep on installing unknown device. No external device (mouse, keyboard, pendrive etc) is connected to my laptop. Can we stop automatic searching and installing of device at the time of reboot? Please give me some solution to get out of this loop and solve the problem.


Posted On: 2010-02-22 . View Related Posts . . View 2 Replies .

Unknown Device On Network Map

Netbook running win7 starter over a wireless network. Full network map shows a big "?" Between netbook and wireless router. This is not seen by any other network computers which are running either vista or xp.netbook can access the other computers but netbook is not accessible to other computers. Error message says to check spelling of computer name. Workgroup is set up and the same for all. No home-groups setup. Very concerned about the unknown device.

Posted On: 2010-01-02 . View Related Posts . . View 3 Replies .

Lxdu Device Unknown Services

In system configuration, services tab, there is a service called 'lxdu_device. In the 'manufacturer column' it says 'unknown'. Anyone here smarter than microsoft and does know?

Posted On: 2012-02-07 . View Related Posts . . View 8 Replies .

Fw Audio Interface On Win 7 32-bit

I've got a terratec phase x 24 fw which worked perfect on vista. And it have glitches at playback, drops until reconnected (5050 that it will work without reboot), silence after pressing play after pause in all media pleer, doesn't work after returning from sleep mode.

I've tried near anything to solve the issue without a positive result (bought external ti chipset controller, switched to legacy driver for it, disable all onboard devices on my asus p5k-e/wifi-ap motherboard and so on). I hate rebooting twenty times and reconnecting fw cable fifty time a day just to make it work. Please, help me to solve this issue.


Posted On: 2010-05-16 . View Related Posts . . View 7 Replies .

Links In Ie8 Not Working - No Such Interface Supported

Links in ie8 not working: "no such interface supported". Error occurs with javascript or target links.

Computer 1: windows 7 pro (64 bit) w/ie8
Computer 2: windows xp pro w/ie8
Computer 3: laptop w/windows 7 pro (64 bit) w/ie8

On computer 1, links just do not work if the onclick is sent to a javascript function (eg: openwindow(); showdiv(); etc. ) Or if the link has a target set (target="_blank", target="_parent", etc. ).

If the link is directly to a page only (eg: href="mypage.html"), then it works.

On computer 2 and computer 3 there are no problems at all.

I have read through forums, uninstalled and re-installed, disabled all extensions, disabled anti-virus, lowered all security settings, tried the 32 bit version, the 64 bit version and the "no add-ons" version (with compatibility view both on and off) - and still no luck.

I do not have google desktop or toolbar installed.

I have gone through all the settings on computer 1 & 3 and made sure that every checkbox and radio button had the exact same selections - made no difference. Ie8 worked on this computer before updating to windows 7. I have also downloaded and installed all the microsoft and software updates.

Is there something else i am missing? I have run out of ideas and have spent too much time on this. I hate to have to go "backwards" and return to ie7.


Posted On: 2009-11-05 . View Related Posts . . View 15 Replies .

Teredo Tunneling Pseudo Interface Driver Issue

Hello there. I was wondering if anyone else has had problems with this 'teredo tunneling pseudo-interface' driver?I just purchased a sony vaio laptop, with windows 7 pre-installed (and a whole bunch a other nonsense i really don't want or (?) Need), and from the day i brought it home i was getting blue screen crashes  daily, sometimes several times daily, with 'bad pool header' as the reason. (Used computer tool to determine was not bad ram, which seems to imply bad driver of some kind. )

After hours of researching, reinstalling, etc (and i am really not very savvy has been a tedious hellish nightmare) i found that my vaio under the 'devices' window, claimed there was a problem with this driver. I have no idea what it is, how it got on my computer, and even after online research i still cant really tell what it is supposed to do. I have since uninstalled/removed it, and for 48 hours so far no blue screen. I am keeping digits crossed.

Even had best buy's geek squad on the line today, to try to make sure there weren't hidden remnants of it somewhere and the gentleman i spoke to also questioned how it came to be installed on my computer, and how it came to be damaged. Anyone have any comment on this issue, is it commonly known to cause problems or was my problem isolated? I have not intentionally saved any of the dumps, as i have no idea how to do this, as for troubleshooting.


Posted On: 2010-05-28 . View Related Posts . . View 2 Replies .

Cubase Se3 Compatibility With E-mu 0404 Usb Audio Interface

Will windows 7 work with cubase se3? Saving it to install later? Will it work with a e-mu 0404 usb audio interface? I currently use cubase se3 on windows vista, it was a right blag to get it set up on vista but it does now work, just wondering if it will work on windows 7? I am also planning to download it now to take advantage of the 30 quid student deal, but don't want to install it until a later date, probs when they release about the 3rd service pack and it actually works properly, would i be able to just save it to an external hard drive?

I also recently bought a e-mu 0404 usb audio interface which was yet again a right blag to set up with vista, just wondering if that will work as-well?


Posted On: 2009-10-20 . View Related Posts . . View 7 Replies .

Graphics Adapter Won't Support Aero User Interface

Why does the windows 7 upgrade advisor say my graphics adapter won't support the windows aero user interface even though i run a geforce 8800gt? I have an hpm1070n with an upgraded video card, power supply, and 4g ram. Everything else is original hardware. The upgrade advisor gives me a caution sign (yellow triangle and black exclamation) and says my graphics adapter won't support the aero user interface, but my 8800gt has much better specifications than the aero hardware requirements.

Right now i thought my weak link was my old ddr ram and my 2. 8g p4 processor, why would it say my graphics adapter isn't up to par?  Does it have something to do with the motherboard?  I would like to upgrade to win7 but don't want to spend the money right now if it won't run properly on my current rig.


Posted On: 2009-10-25 . View Related Posts . . View 2 Replies .

Unknown Cd Key Cannot Be Changed

I own windows 7 2 months and my problem came after the second installation. I was commissioned to install the original code and everything was ok, but when i wanted to activate the windows system so i wrote it over and over again that i have to cdkey rewritten or buy a new one. When i want to activate it, in control panel system folder which shows what your cdkey i had a completely different cdkey as i enter it and the unknown cdkey can not be changed and now i can not activate windows, please help me with my problem, thanks

Posted On: 2010-02-16 . View Related Posts . . View 3 Replies .

Unknown / Unexplained Error

I recently have been having an issue of an error box popping up it gives no error code all it it also does not have the appearance of windows 7 looks more the gui from windows xp or even windows 95
Example: after clicking on camspace.exe i get an error box the window's label/name is "camspace.exe-no disk" and in the main body of the window there is a white x inside of a red circle next to that the error message reads " there is no disk in the drive. Please insert a disk into drive" target drive is "deviceharddisk4dr10".

I post this because i could not find a similar case online and i know that windows always generates an error code for reference, so i am wondering if this is a more complex error not related to windows or if it is spyware/malware.


Posted On: 2010-05-01 . View Related Posts . . View 3 Replies .

Unknown Local Drive Created

I presently work on windows 7. Yesterday, i was trying to print a document. Hadn't having the printer driver , i was trying to print with, default settings i.e automatic driver installation of windows.
But wasn't able to do so. At the same time when i opened "my computer", i found a local drive named "q" was created having zero amount data , and which was  neither accessible nor removable too. I tried alot to remove it but i wasn't able to.
 
Help me out how to remove that drive q. It isn't a virus. I had already scanned it or if it is, then must b of new kind because i update my avast antivirus database everyday.


Posted On: 2010-04-14 . View Related Posts . . View 3 Replies .

An Unknown Error Occurred While Printing

My pc started running like molasses earlier this week, and since i got that fixed, it can't print to anything. How can i fix this? I've been using win 7 rc (64-bit) on a new pc (asus m3n78 motherboard, quad-core amd phenom 9500 processor, 4gb pc6400 ddr2 800mhz memory) since mid-july. This is a stand-alone pc connected directly to a lexmark x6170 printer via usb2 cable.

There are no routers or networks involved (other than the internet connection via a dsl modem). However, my firewall (comodo internet security) has reported finding (this week) a local area network at 192. 168. 1. 1.

The pc had been running fine til last tuesday (10/6). Then it started running like it was full of molasses. It would run ok at start-up, but once i had more than 1 or 2 things running, every little action took several minutes to complete.

The action center showed 3 problems, including something indicating that "windows 7 is no longer working" and something else indicating a chipset problem. First, i hit the win7 issue, which thought i wasn't getting updates. (I was, and had gotten an update just a couple of days earlier. ) I ended up downloading an "optional" update having to do with "hd audio". Then i went thru the "chipset" issue and ended up getting several nvidia drivers updated or installed. (I don't remember what the 3rd issue was, but i went thru it as well. )

Since doing all that, the molasses problem is gone. But now, i cannot print to any print driver - either my lexmark x6170 printer or my nuance pdf print driver. (The lexmark is using the 64-bit vista driver from lexmark. )

The win7 printer troubleshooter doesn't find a problem with either one. When i try to print to either one from firefox, i get "an unknown error occurred while printing. " If i try to print from nuance pdf converter pro 5. 1, the print task just disappears. If i try from ms excel 2003, i get either "your file could not be printed due to an error on docucom pdf driver on ne03" or "your file could not be printed due to an error on lexmark x6100 series on ne04"

At one point i found another lexmark driver via the microsoft website, and tried installing it. I think its name was something like "lexmark 5600-6500 series". That driver installed to "lpt1", and printing to it failed as well. I then deleted both lexmark drivers last night, and let the pc find the printer and install a driver on its own today. It found the "lexmark x6100" driver, presumably from my hard disk.


Posted On: 2009-10-12 . View Related Posts . . View 7 Replies .

Unknown Virus Winoffice11.exe

I have a problem with windows 7 premium 64 bit. I notice i have a new file called winoffice11.exe *32 running in my task manager. This file is located in c:program files (x86)windowswinoffice11.exei am unable to remove this file. I stop the program in task manager, delete the folder but upon reboot after clearing cache and temp files etc i get the same file back. So i think it is a virus yet i cannot see to get any virus scanner to remove it. I have zone alarm installed, i even ran the onelivecare full scan and it was still there. I know this is not a standard install file from ms or is it?I do run vm on the effected machine.

Posted On: 2010-08-03 . View Related Posts . . View 14 Replies .

Unknown Error Code 80070643

I have windows 7 ultimate. I am attempting to install an the update for windows 7 (kb971033). I keep getting the following message: "error found: code 80070643 windows update encountered an unknown error. " I have tried a few things to attempt to fix this issue:

I have used microsoft fix it to repair the .net framework automatically i have tried reinstalled the .net framework i have insured the status of the office source engine service is set to manual.


Posted On: 2010-04-25 . View Related Posts . . View 5 Replies .

Unknown Solution In Action Center

My action center keeps telling me that there's a solution for a problem it encountered. When i try to read the solution, it loads for a while, then it tells me that the solution could not be downloaded with missing internet connection being the most likely cause. This cause guess is obviously wrong because i am online. Yet, the action center only names the most likely cause and absolutely fails in further troubleshooting, something it was created for.

Anyway, can anyone tell me how where to get further information on the problem and solution?


Posted On: 2010-02-07 . View Related Posts . . View 3 Replies .

Unknown Update Problem With Outlook Links

Unable to open a link from outlook, "restrictions in effect, contact system administrator" i am the only user on this computer i own this computer & am logged in (perpetually) as the administrator. I was told an update created this problem & i would like to stop it. Also, a java update needed to be installed, the operation failed, the error message said it had to be escalated. I was told an update caused my problems, but i don't know which one could have done it.

Posted On: 2010-04-07 . View Related Posts . . View 2 Replies .

Unknown Dvd Maker Error Message

Here is a frustrating problem i am having with windows dvd maker that no one can seem to explain. I have a new computer, less than a month old, running windows 7. I have been trying to burn some home movie clips on to dvds for various friends and family. I completed 3 or 4 dvds successfully. All of a sudden, during the burning process, i get to a point about 0. 3 to 0. 4 percent encoded when i get an error message that the dvd cannot be made due to an unspecified error.

Every fresh, new, out of the package disk i try to use ends up with the same message. The clips haven't changed, the filters haven't changed, the settings haven't changed, i've just done a few successfully with no problem, now all of a sudden it can't burn any more discs. What happened? What do i need to do to fix it?


Posted On: 2010-02-09 . View Related Posts . . View 2 Replies .

Logon Failure Unknown Username Or Bad Password

My laptop is running windows 7 pro. I have created a vpn connection  to my workplace and saved the connection credentials for any user of the laptop. This works fine, but when i try to login to the domain i get the error: login failure:unknown user name or bad password. This is after using the switch user option and then using the network connection option, this brings up the vpn login window, i re-enter the vpn login credentials, the machine connects to the vpn and then goes to a welcome screen and this is where i get the error message. With xp pro this did not happen, the machine would connect to the vpn and then display a domain login window. What am i doing wrong?

Posted On: 2010-05-27 . View Related Posts . . View 3 Replies .

Update Failed Code 643 Unknown Error

Several updates failed, namely microsoft.net framework 4 client profile for windows 7 x64-based systems and security update for 2007 office. I have also been unable to update to the most recent version of itunes so i set my windows installer to manual start but i receive the message the microsoft installer service could not be accessed. This can occur if you are running windows in safe mode, or if the windows installer is not correctly installed. Please help, i cannot use my new iphone 4 fully.

Posted On: 2010-07-24 . View Related Posts . . View 2 Replies .

File For Cd/dvd Drive Unknown / Upgrade Issue

Running windows vista home premium 32-bit operating system, i have windows 7 home premium upgrade for vista, i cleaned and deleted a lot of junk before install, and accidentally deleted some things, like hardware diagnostic tool, i tried using system restore wouldn't correct problem. Went to install windows 7, f/drive wont open even manually, cd/dvd driver says working properly, no path and file for f/drive unknown. If i can assign a path and file for the drive i can upgrade and should take care of file problems?

Posted On: 2010-05-07 . View Related Posts . . View 6 Replies .

Cannot Open Exe Files - Archive Is Either Unknown Format Or Damaged

Can't open almost all of my application files. Or exe files. It only says "d:windowsegedit, the archive is either unknown format or damaged" , "d:windowsegedit32, the archive is either unknown format or damaged" or any file i would open please help. This starts when i downloaded a program and i open it with winrar. Then my icons became all winrar icons. I don't know what to do please lend me ur advice thank you very much i appreciate it i use windows 7. I tried anything i could and my last choice is to reformat but i have important files here so any idea of fixing this without being format?

Posted On: 2010-06-04 . View Related Posts . . View 12 Replies .

Device Malfunctioned Error Code - 43 - Usb Device Not Recognized

I purchased a new computer with windows 7.initially my ipod worked fine with this computer. It still charges the ipod but nothing else. In addition it will not work on my old computer.

1. I have completely uninstalled and reinstalled itunes.

2. I reset the device losing all of my music.

3. I have gone to device manager and the ipod shows up as unkown device. I have stopped the device driver and rebooted.

4. I have tried to have attached to my old computer update and i receive the exact same error and usb not recognized message.

5. Other devices work fine on the usb hub, in addition i have tried the other usb hub.

All of the above measures have failed. This all started when i was having problems updating my music to the ipod, and i chose the restore function on the summary page of the itunes software, with the device attached, and recognized. Since then nothing? Initially when the device was attached after the restore option was chosen, i got need to attach to a 2. 0 usb  high speed hub, error message? It is a 2. 0 usb high speed device. I have reviewed other questions in this forum, on apples forums, all with the same results, nothing.


Posted On: 2010-01-26 . View Related Posts . . View 2 Replies .

Dvd Device Driver Blocked - Unable To Use Device Code 48

I get a code 48 message. I have an intel d945psn board that has run w2000 on a eide hard drive. I upgraded to windows 7 with a new sata hard drive clean install, but transferred files with pc mover. Now my dvd burner(s) don't work citing the infamous code 48 and saying that the software for this device has been blocked from starting because it is known to have problems with windows.

Aren't cd/dvd device drivers pretty standard, and included with the bios?  How do i deal with that problem. I have tried to update drivers through "driver access", but the problem persists. The device doesn't even show up in windows explorer or my computer, but can be seen in device manager and on the cmos menu. The same is true of my second, identical sata hard drive. It appears that some of my important system drivers have been blocked.


Posted On: 2010-03-01 . View Related Posts . . View 2 Replies .

Drivers For Intel(r) 8280

Can anybody please tell me where i can download these drivers for windows 7 ultimate 32 bit (i keep getting a bsod) intel(r) 8280 1gb/gr/gh (ich7 family) serial ata storage controller - 27c0

Wd ses device
High definition audio device

Intel(r) 8280 1g (ich7 family) usb universal host controller - 27c8
Intel(r) 8280 1g (ich7 family) usb universal host controller - 27c9
Intel(r) 8280 1g (ich7 family) usb universal host controller - 27ca
Intel(r) 8280 1g (ich7 family) usb universal host controller - 27cb
Intel(r) 8280 1g (ich7 family) usb2 enhanced host controller - 27cc


Posted On: 2010-07-14 . View Related Posts . . View 16 Replies .

Usb Hub Displaying As Device In Device Manager

Pretty much all my device connected to my usb hub used to show in device manager as separate devices. However, they now only show under the name "kevin o'connor" (the name of my zune). Open the device's properties and going to the hardware tab will show all the device connected via the usb hub.

Therefore, all the devices do in fact work, it's just a little bothersome to me, and the fact that i can't safely remove anything from the hub without having to eject the entire hub. Here's a screen shot that shows what the hub shows as: http://i34. Tinypic.com/34fxmp4.png


Posted On: 2009-10-28 . View Related Posts . . View 4 Replies .