Advertisements:




Radeon Hd 4670 Graphics Card Cpu At 100%


I have a radeon hd 4670 graphics card that i'm trying to use with windows 7. The problem i am getting is that my cpu usage is 100% when i am using the graphics card. I have the newest driver installed for my graphics card. Any ideas how to fix this. When i run off my integrated graphics i don't get this issue.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Radeon Hd 4670 Agp Card Problem

I am running a clean install of windows 7 hp64 on a new hard drive on an old motherboard, asus a8v-x with an opteron 180 processor. The card works fine when i boot winxp from the other hard drive.

I have installed the latest ati agp hotfix driver for win 7 64. The device is listed in the device manager under display adapters as "radeon hd 4600 series" but with a yellow caution exclamation mark.

Opening properties, the error message states: "windows has stopped this device because it has reported problems. (Code 43)"

I have uninstalled, driver cleaned, re-installed, installed previous releases of the ati agp drivers, etc. And nothing seems to get this card running on win 7. Any suggestions would be appreciated, as this is the last piece of hardware i have not been able to coax into life under win 7.


Posted On: 2010-02-26 . View Related Posts . . View 11 Replies .

How To Update Radeon 5770 Graphics Card Drivers ?

Cant figure out how to update ati graphics card drivers and update catalyst control center. Cant find install manager on my windows 7 64 desktop i7 processor/radeon 5770 graphics card. I just purchased new computer dell xps 8100 and i would like to update to 10. 3 driver for graphics card 5770 radeon , also newest version of ccc!

Anyway i tried following ati online instructions but i cant find ati install manager anywhere programs and features/program files explorer search and no luck. Do i just uninstall ati ccc and driver separately or use revo or driver sweeper or download ati install manger. If so which version or ?


Posted On: 2010-05-06 . View Related Posts . . View 2 Replies .

Ati Radeon 4850 Graphics Card No Longer Works

Alienware m17 vista os 4850 ati radeon graphics card updated to windows 7, graphics card no longer works. How to fix? I just recently upgraded from vista to windows 7. My graphics card is no longer recognized. It is an ati radeon 4850 (unsure about the number but def 4000 series). I un-installed the driver like the installation wizard of windows 7 said to do. Now, however, it does not recognize any driver, or driver updates, or reinstalls of the ati radeon.

Posted On: 2010-01-11 . View Related Posts . . View 2 Replies .

Xp Mode In Win7 Will Not Detect Ati Radeon Graphics Card

Under windows 7, in xp mode (virtual), the system does not detect my graphic card (ati radeon hd4530). This card is essential to run a professional application (multimedia program). Can you please help me. Thanks, christian. *Original title - _windows 7 - xp mode (virtual) with graphic card ati radeon hd4530.

Posted On: 2010-06-20 . View Related Posts . . View 3 Replies .

Ati Radeon Hd 4570 Graphics Card Driver Issue

I recently purchased a asus k40ab series laptop with ati hd4570, 512mb gpu. I have installed windows 7, 64x. The problem is that the hd4570 gpu is not working, i guess because of the driver (i don't think there is a driver for it yet). So, is there any way i can make it to work.

Posted On: 2010-01-07 . View Related Posts . . View 3 Replies .

Diamond Multimedia Stealth Radeon 9250 Graphics Card Compatibility

I want to know if the diamond multimedia stealth radeon 9250 256mb ddr pci graphics card s9250pci256sb is compatible with windows 7. The compatible list only states that the s9250pci256 is compatible does not state if the sb model is compatible or

Posted On: 2009-10-27 . View Related Posts . . View 2 Replies .

Ati Mobility Radeon 9000 Graphics Card Compatibility With Win 7

Was thinking about upgrading my hp pavilion zv5000 series laptop to windows 7, i did the upgrade adviser and it says that it doesn't like my graphics card, and that is the only thing. Was wondering in all the months of rc testing was anyone able to get a driver to make it work. Would like to do a complete refurb on my laptop.

Posted On: 2009-10-22 . View Related Posts . . View 3 Replies .

Hp Pavilion Dv4 Laptop Issue With Radeon 4200 Graphics Card Driver

Issue with hp pavilion dv4 laptop with a radeon 4200 graphics card driver updates in windows 7 i have an hp pavilion dv4 laptop with a radeon 4200 graphics card and amd turion dual core 64 bit operating system on windows 7 home premium. I recently updated the radeon 4200 driver and now i'm not able to adjust my screen brightness at all.

Posted On: 2010-06-21 . View Related Posts . . View 3 Replies .

Win 7 Wont Detect Ati Radeon Xpress 200 Graphics Card

Yes i have reinstalled the graphics card do not suggest it. Graphics card is ati radeon xpress 200 series. I know its old shut up. Its driver is ati2dvag.dll. I have it installed on my computer in system32, and in a folder i created, when i go into device manager and try to manually select the driver its not listed. It is inside the folder but it wont let me select it. Why?

Why is windows 7 not detecting my graphics card and using "standard vga adapter" with the driver vga.dll. Why? I have the driver it wont let me select. And the graphics card is installed. What do i do so it recognizes the card, uses the driver and doesn't irritate me anymore?


Posted On: 2010-04-28 . View Related Posts . . View 2 Replies .

Install On Dell Inspiron 1564 With Ati Radeon 4330 Mobile Graphics Card

Windows 7 32 bit on dell inspiron 1564 (with ati radeon 4330 mobile graphics card). I have purchased a dell inspison 1564 laptop. My dealer tells me that the installed graphics card will only work with windows 7 64 bit edition. One key reason for purchasing this laptop was its graphics card. I own a windows 7 32 bit key. Shall i install it or would i need to buy a 64 bit key? Will installing the 32 bit version lessen the graphics experience on my system?

Posted On: 2010-04-30 . View Related Posts . . View 2 Replies .

Cpu Goes Up To 100%

I have upgraded from win xp to win 7 , with cpu intel celeron d 2. 53 ghz, 1gb ddr2 ram, nvidia geforce 6200 , via vt8237 sata , via rhineii lan and cmedia cmi9761 ac97 audio codec. After updating most of the drivers individually from the different manufacture , the computer become better in performance, however, it is 4 % cpu when idle and 100% when opening any one of the programs , such as word, ie8, etc and doing virus scan by kaspersky.

Notice that , i can not complete the virus scan as it shows messages insufficient memory after 3 hours scanning and then stops the scan. Also , the cmi9761 has no drivers updated for windows 7.
Do not know whether the single core cpu is the problem or the 1g ram is not enough.


Posted On: 2010-04-01 . View Related Posts . . View 8 Replies .

Cpu At 100% Usage

I upgraded from vista to win 7 on release day and have had no problems until recently. Over the last few days, my cpu usage will spike up to 100% at random intervals and stay there for a long period of time. When i check task manager and show processes from all users, services.exe is fluctuating anywhere from the low 50 to low 70% in usage. When the computer is running normally, services.exe is around the high single digits. I've uninstalled and programs that i installed immediately prior to the problem happening (and it's happening again as i type this) and i've run comprehensive virus/malware scans using microsoft security essentials and the eset online scanner.

Both found some adware stuff and removed it, but no virus or serious malware issues. This has been going on for several days and has made my computer almost unusable, and i'm at a dead end for what to do or where to look next. I hate to to a reinstall because the original install was so recent, so any advice i can try to avoid starting over would be great.


Posted On: 2010-01-08 . View Related Posts . . View 5 Replies .

Cpu Is At 100% When Idle

I have had a problem the last 2 weeks. My sons pc has suddenly started to behave badly when he is playing games. The are choppy and behaves strange. The same games worked perfectly before and just a few things has been altered. When i look at the cpu it's at a constant of 70-100% and it "spikes" every second. That behavior fits the problem it the games he plays.

When i look in task manager it shows that wmiprvse.exe has two processes running. One at 35-50% and one at 10-12%. At first i uninstalled avast 5 and reinstalled mse (the problem started about the time we changed the av) but it didn't help. I have also tried process-explorer and the only thing it tells me is several "ntdll.dll!Rtluserthreadstart" within wmiprvse.exe.

I have scanned the system for viruses and also scanned for malware but my system is clean. The system works fine in itself (windows 7 ultimate retail) but the hight cpu-spikes is really noticeable when a games is played. Of-course the system is up to date with all the latest drivers and updates from wu. What can i do?


Posted On: 2010-02-16 . View Related Posts . . View 2 Replies .

Cpu Often Goes Up To 100% Usage

Often, i turn on my computer and it slows down a lot when i get to the login screen. It hangs on the "please wait. " Screen for a minute until finally letting me log in and then goes to the "welcome" screen and hangs for a minute more until it finally pulls up my desktop. The cpu usage stays at 100% for a while. Sometime it goes down to a normal level, but other times it will stay there until i restart my computer (which usually leads to the same thing).

I used malwarebytes' to check to see if i had any viruses, malware, spyware, whatnot and it came up clean. I defragged my computer and that didn't work, i looked to see if there was a program eating up the cpu and there wasn't and then i tried anti rootkit and that found nothing. So, i am pretty *** right now because i have yet to find a solution.


Posted On: 2010-03-22 . View Related Posts . . View 6 Replies .

System Down Cpu Is 100%

I used xp and purchased windows 7, installed the 64 bit version and everything worked great. Then one day an important windows driver got deleted and there was nothing i could do but a clean install. I could not get the 64 -bit disk to read for some reason so i installed the 32. Now before the clean install, i could run two gaming windows and surf the net and my cpu would be around 30%.

Also when i rated my system my cpu was in the 6's. Now when i open one game window and nothing else, my cpu is 100%. And now my cpu is rated in the 4's. What could have made my cpu rate lower? I have downloaded the mobo drivers for windows 7 from my mobo manufacturer. I called tech support and think i got an asian kid that is still in high school. He did not have a clue as to how to fix it. I just did a clean install and he had me cleaning out my temp folders and other files which made my system unresponsive, once again had to do another clean install .

Cpu is still running poorly with windows 7. I have tried several things mentioned in the forums like disabling the windows media stuff but it did not work. The biggest thing soaking up my cpu is the system idle process which is always above 60%. I really like the windows 7 look but am close to just chalking it up to a wasted $140 and going back to xp. I thought windows 7 was supposed to be better than vista when it comes to resources but it seems much worse.


Posted On: 2010-04-09 . View Related Posts . . View 2 Replies .

Explorer.exe Using 50-100% Cpu

I've noticed this for a few weeks. In task manager, explorer.exe shows as using 50-100% cpu, and programs seem to run more slowly. This reliably starts when i open an "explorer window". It will also start if i use msconfig to disable everything (except microsoft services). I have booted into safe mode and run malwarebytes anti-malware - nothing found.

I then ran process explorer, and discovered that the thread which seems to be responsible is called (has a start address) nttdll.dll!Etwtracemessageva+0x130. There may be one or two of these threads present, each using 48%+cpu.

I believe these are responsible, and i think they are used in some kind of event logging, possibly a debugger that somehow got turned on, but i don't know how to proceed from this point.

System:
Intel core2 email removed for privacy
8gb ram
Windows 7 professional 64 bit


Posted On: 2010-05-13 . View Related Posts . . View 8 Replies .

Edimax Ethernet Card 10/100/1000 Lan Card Problem

I have windows seven (new to it) there was a problem with my onboard ethernet controller (it seems that 7 does not support it though it's installed) so i bought a new edimax ethernet card 10/100/1000 with realtek 1869 chipset. This card should be fully supported by win 7 (since its written on it and has a special driver to win 7).

I installed the card and everything went well, after wakening my pc from sleep mod it took him a long time to recognize the ethernet cable and when it did i had no internet access, restarted the computer and then again after restarting the same problem recognized the cable but no internet access, tried unplug and plug the cable, this time it helped i got the internet back.

Every time i shutdown the pc or it was in a sleep mod i have the same problem with the no internet access thing. What shall i do?


Posted On: 2010-03-27 . View Related Posts . . View 3 Replies .

Dumprep.exe Causes 100% Cpu Usage

Whenever a  program is "not responding", i'll hit "end task"in "task manager", then another window opens up with a choice to select "end now" and it'll take forever for it to terminate. Meanwhile, i cannot do anything else as task mgr shows 100% cpu usage. I notice dumprep.exe is causing the 100% cpu usage and i can only wait until it completes whatever it is doing. Most often, i'm waiting several minutes. I'm not sure what started this problem as in the past i never recalled this happening.

Posted On: 2010-07-12 . View Related Posts . . View 3 Replies .

Cpu 100% Usage Problem In Win 7

I have seen many posts in this forum about high cpu usage but i have tried everything and the performance tab is still displaying 100% cpu usage, while if i open resource monitor it says cpu usage stays around 6% on my relatively brand new computer. Does anybody know whats going on?

Posted On: 2010-08-15 . View Related Posts . . View 3 Replies .

Cpu & Memory Usage On 100% Even With No Programs Running

My new laptop with windows 7 pre-installed is running slow. Task manager shows cpu usage and memory usage at or nearly always on 100% even with no programs running. Checked out various user forums and tried using the tools within win7, but no joy.

Posted On: 2009-12-17 . View Related Posts . . View 7 Replies .

Ati Radeon Hd 3200 Graphics Graphics Problem

I just upgraded windows 7 (twice now) and i'm experiencing graphics problems. It is most prevalent in windows media player and mozilla firefox.

Here's some pictures:
http://i254. Photobucket.com/albums/hh81/plasmaxwisp/errors.png
http://i254. Photobucket.com/albums/hh81/plasmaxwisp/erros2.png

It seems like the colors just drop off. And i know that windows media player does not look like that! The only internet browser that isn't affected by this is chrome. I've experienced another slew of graphics problems including a really bright wallpaper, but that inexplicably went away. I'm pretty sure i've updated my graphics card drivers. I've tried to load games, and they work with no problems; the problem only exists in these programs (as far as i know).

Computer specs:
Hp artist edition (this may contribute to the problem?) Laptop, pavilion dv6
Amd turion x2 ultra duel-core processor
Acpi 64 bit system
Ati radeon hd 3200 graphics card
4 gigs o' ram
Any additional specs needed? Just ask.


Posted On: 2009-12-21 . View Related Posts . . View 2 Replies .

Datavideo Dac 100 Capture Card Problem

Having trouble with a firewire, analog to digital convert in win7 home premium. When plugged in, win7 tells me that it "failed to setup system components for showing picture or sound". Details indicate that the template manager returned an error: "failed to detect which capture qualities are available for this device".
 
It shows up in the device manager under imaging devices as av/c subunit. I am using it in conjunction with media import from roxio's creator 2010. Naturally it worked in xp without any fuss but i never hooked it up in vista. There never was any "driver" for this device. And of course it is no longer supported by the manufacture.


Posted On: 2010-01-21 . View Related Posts . . View 2 Replies .

Ati Radeon 3200 Graphics Score Went From 4.0 To 3.9

I updated my ati radeon 3200 driver for 64 bit and my graphics score went from 4. 0 to 3. 9, why? All my other scores were 5. 1 to 6. 9. Why did the graphic score take a hit with 64bit drivers?

Posted On: 2009-10-24 . View Related Posts . . View 2 Replies .

Ati Radeon Xpress 200 Graphics Not Working

Pc reboots showing a blue screen and ati radeon xpress 200 graphics not working with windows 7.

1)i have an ati radeon xpress 200 series integrated motherboard, i have installed 64bit windows 7 but every time i use it shows a blue screen and instantly gets rebooted.

2)i have downloaded latest updates for video adapter from microsoft, but they are in the form of *. Cab files can anybody explain how to install them.


Posted On: 2009-11-29 . View Related Posts . . View 7 Replies .

Ati Radeon Hd 4850 - Poor Graphics Display

I'm running windows 7 on a 27" imac using an ati radeon hd4850 graphics card. The problem: rather than smooth gradients between colors, the graphics are "stepped" or striated. Ie. Rather than a grayscale gradient smoothly transitioning from black to white, it steps through a series of gray tones from black to white. Using ati's catalyst control center, i can change the color quality from high (32-bit) to medium (16-bit) and this affects the gradient, but is still not a smooth transition. On the mac os side of the machine the graphics are beautiful. I've tried everything and called everyone.

Posted On: 2010-06-19 . View Related Posts . . View 2 Replies .

Missing Ati Radeon Hd 4850 Graphics Drivers

I have an new apple imac i5 computer. It's an intel based unit and if someone, either microsoft or apple would supply drivers for the graphic card used in the unit, i would purchase your windows 7 software and run it on the computer. Apple seems to be a little slow at this point in developing their bootcamp software to support windows 7 and the missing piece seems to be the drivers for the ati graphics card (ati radeon hd 4850).

I have a feeling that if microsoft were to supply the missing drivers, perhaps as a upgrade, then you may find a whole bunch of these new imac owners purchasing your software, namely me, among others. Any thoughts?


Posted On: 2010-01-19 . View Related Posts . . View 3 Replies .

Ati Radeon 9200 Graphics Controller Driver

Ati radeon® 9200 graphics controller driver for windows 7

Posted On: 2010-05-13 . View Related Posts . . View 6 Replies .

Ati Radeon X1600 256mb Graphics Support

I would like to run windows 7 mounted on an imac with a 2. 16 ghz intel core 2 duo cpu. I plan to upgrade to snow leopard os and increase to 3gb ram and then mount windows 7 using boot camp.
I could upgrade from my present ati radeon x1600 125mg graphics to 256mb. Would this graphics display be adequate for full functionality on windows 7?


Posted On: 2010-04-02 . View Related Posts . . View 3 Replies .

Ati Radeon 9100 Igp Graphics Problems

I have an asus pundit-r that is working pretty well with windows 7, apart from the poor performance of the inbuilt ati radeon 9100igp graphics. To try to improve on this i added a powercolor hd2400 pro in one of the pci slots as a cheap upgrade.

Unfortunately, i can't disable the integrated graphics - there's no bios option for that (and yes, i have got the latest bios!). All i can do is change the priority between integrated first and pci second and pci first and integrated second.

If i have pci first then windows 7 does come up on the hd2400. However, there is a code 12 error (this device cannot find enough free resources that it can use) on one of the pci-to-pci bridges and the hd2400 shows up as a 'standard vga graphics adaptor' with a code 10 error (this device cannot start).

Alternatively, if i have integrated first then windows come up cleanly on the integrated adapter and i have two display adaptors available; the onboard one ('standard vga graphics adaptor' and the hd2400 ('ati radeon 2400 series'). The onboard graphics are running with the windows 7 vgapnp.sys driver and the hd2400 is running with the latest amd catalyst drivers (8. 661. 0. 0). Everything looks good  in device manager!

However, windows 7 then uses the onboard graphics as its primary interface (as expected) and i can't get any output at all on the hd2400. Only one monitor shows up in 'display. Screen resolution' and pressing the 'detect' button fails to add the second display. What i want to do is to get the second display running and then set windows to use that one exclusively.

I understand that this could be the expected behavior if vgapnp.sys wasn't a wddm 1. X-compliant driver, but as it's part of windows 7 then surely it must be. ? Any ideas about how i can get the hd2400 working?


Posted On: 2009-11-05 . View Related Posts . . View 7 Replies .