Cannot Restore System Failed To Start

I purchased a lenovo with windows 7 starter it has the one key recovery option but i cannot use it i get a error message that states the program cannot restore the system this is supposed to be a secured partition in the harddrive installed by lenovo and with win 7 added but i cant even get the pc to boot up when i boot up i get a black error screen that says windows failed to start. This is a netbook without cd-roms and the harddrive is where the win 7 is installed i did backups internally never to a disc i just purchased this computer in feb 2010 its only may not even 3 months of use and its of no use if the windows wont boot up so obviously since it wont boot i cant download anything from microsoft or the lenovo site what can i do to get that computer working i called lenovo its not covered in the warranty cause its software from microsoft software.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.

Boot Start Or System Start Driver Failed To Load

Getting frequent blue screen errors in windows 7 professional, 64 bit. Checked the event viewer and the error id is- 7026. The system is not having any optical drive installed, and have disabled access to cd/dvd rom in group policy.

Posted On: 2010-07-23 . View Related Posts . . View 2 Replies .

System Fails To Restore To Restore Point Using Win 7

When i try to restore to a point i get a message that the restart failed and i should try turning off anti virus. I turn off the anti virus programs and still get a message that the restore failed.system fails to restore to a restore point using windows 7.

Posted On: 2010-01-04 . View Related Posts . . View 2 Replies .

Windows Failed To Start

I have successfully installed windows ultimate 7. I think. I hesitate to say successfully because when i restart or shutdown and restart, more than half the time on reboot, the system i am installing windows 7 to resets and then comes to a "windows failed to start" screen.

At that point, if i choose to "start normally" it will - most of the time - start. On occasion, it will reset again, come to the "windows failed to start" screen again, i will chose "start normally" and it will this time boot. I thought at first it was a driver issue but i tried the install without the drivers and have the same issue. I have tried different keyboards, mice, etc. None of that helps. I have tried going into msconfig and unchecking "use original boot configuration". I read that this had worked in another forum with a similar problem. It was worth a try.

Posted On: 2010-02-26 . View Related Posts . . View 3 Replies .

Restore Item To Start Menu Jump List

I need to know how i can restore an item to the start menu jump list for excel after i removed it earlier. I had a file on my excel start menu jump list and removed it by right-clicking on it and choosing "remove from list. " Now i would like to see that file show up on my jump list under recent again. No matter how many times i open the file†it does not show up on the list. It shows up on the excel pearl-button-ribbon menu under recent documents but not on the start menu excel jump list.

Posted On: 2010-05-21 . View Related Posts . . View 4 Replies .

Windows Failed To Start - Hardware Or Software Change Might Be Cause

I've been trying for 12 hours to get upgrade to windows 7 professional from vista business. I get to the part where "expanding windows installation files" is done. The computer reboots with windows boot manager and then i get the following error message:

Windows failed to start. A recent hardware of software change might be the cause

File: $windows. ~System32driversiastor.sys

Status 0xc000035a

Info: windows failed to load because of a critical system driver is missing or corrupt

File: $windows. ~Btwindowssystem32driversiastor.sys

Status: 0xc000035a

Windows failed to load because a critical system driver is missing or corrupt.

When i try to reboot from the upgrade cd, i get the message

The upgrade was not successful. Your previous version of windows is being restored.

Do not restart your computer during this time

My computer is an asus r1e with an intel core 2 duo t7700 2. 4 ghz with 3 gb ram running windows vista business sp1.

Posted On: 2009-10-25 . View Related Posts . . View 9 Replies .

Failed To Start - Recent Hardware / Software Change Might Be Cause

A few days ago i upgraded my acer aspire 6930z from window a vista to windows 7, the upgrade was successful. After a day, my laptop did a chkdsk on my ci drive, when the process had finished it restarted my computer, it then came up saying: starting windows after a blue screen appeared for a second and my computer restarted. Then a message came up saying: windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1) insert your windows installation disc and restart your computer

2) choose your language settings, and then click next

3) click 'repair your computer'other options

1. Safe mode

2. Safe mode with networking

3. Safe mode with command prompt

4. Last known good configuration

5. Start windows normally i have tried using my computer in safe mode and normal mode but when i turn my computer on, it loads windows and then restarts with the same message. I tried to repair my computer but when i boot from the installation disk, it loads the files and then says: starting windows, after that there is a blank screen with the mouse in the middle. So now i cant use my computer at all and i dont have to go out and buy a new one.

Posted On: 2010-05-22 . View Related Posts . . View 2 Replies .

System Restore

My current pc came with vista preloaded. I did not receive a cd disk with it. Rather the manufacture had set up a recovery partition for me to restore the system. In addition, vista also gave me the option to make recovery disks which i did. If i upgrade to windows 7 and do a clean install will it give me that same one time option to create the recovery disk for my computer?†

Also, when i do install windows 7 will it give me the option to wipe my whole hard drive including the old recovery partition and allow me to create a new recovery partition?†I realize that it is the manufacturer that has set up the recovery partition, and i have never had to do it for myself before, so i was wondering if that is some kind of option with windows 7 or if i am on my own to create a new one? † †† †

Posted On: 2010-02-11 . View Related Posts . . View 2 Replies .

Need To Restore System

I just finished restoring my system for the 10th time in the three months that i have owned this new windows 7 computer. For at least 10 times when i have been advised that the windows 7 operating system has been†updated i am not able to get on the internet with the use of internet explorer. After restoring the system to a time before the most recent update i am once again able to get on the internet. Does anyone have any idea on how to stop the need for restoration after an update?

Posted On: 2010-04-22 . View Related Posts . . View 3 Replies .

Why No System Restore?

A registry defragmentor program caused my sysem to not be able to boot. The system could not repair itself either. I also tried last known good configuration without results. I tried to do a system restore and had a number of restore points to choose from, but every one i chose gave me an exclamation mark and i could not put a check mark in the c windows box.

I was able to get my system back using another backup routine (image) i was using, but this backup was 3. 5 weeks old and i had 3 restore points for 3 days ago. So what might i do to get this working† in case a similar event happens and my system is unrepairable via the repair tool presented. Windows 7 home premium 64 bit.

Posted On: 2010-04-02 . View Related Posts . . View 7 Replies .

System Restore Does Not Work

I recently had big problems with my dell inspiron 530 and it would not reboot. I finally got to the part of the safe mode where you can do system restore. I tried the 1st restore point and thought everything would work but all of a sudden i get a message that says system restore did not complete because of an error. I tried 2 more restore points and got the same message. Some way the system recovered and booted up the normal way when i started it normally. I would like to know why system restore would not work. Does the antivirus program need to be off or uninstalled? Does windows defender have something to do with this?

Posted On: 2010-05-15 . View Related Posts . . View 2 Replies .

Restore From System Image

I have a hard disk with two partitions, one for my windows 7 installation and one for my media files. I want to make a system image of my windows partition only using the backup and restore feature in windows 7 (a backup of the files on the media partition would require more space than i currently have).

If i create a system image of the windows partition only and use it to restore to the the same hard disk that windows is currently installed on (which also contains a partition with my media files), will i lose the files on the media partition?

Posted On: 2010-03-16 . View Related Posts . . View 6 Replies .

Win 7 System Restore

It wont let me do a system restore due to the common error below. "System restore could not access a file" and the event viewer shows "an unspecified error occurred during system restore. Additional information: 0x80070005"i notice that norton commonly causes these problems, and i may have a similar issue?I have uac turned off, what i do have is avast free antivirus, and ive tried turning it off before doing a system restore, but as soon as the pc boots avast is back on again, which may prevent restore from doing its job. Has anyone heard of avast buggering up system restore?

Posted On: 2010-07-30 . View Related Posts . . View 5 Replies .

Restore System Administration

Also, my user account profile says i am the system administrator. However, ever since i upgraded to windows 7, i have been blocked from changing anything that requires a system administrator account. This is particularly true when i try to create a restore point, which i cannot do because it does not recognize that i have administrator rights.

When i bring up the system window and select system protection, it says that system restore is disabled by your system administrator. Except i am supposed to be the system administrator.configuration and system restore point creation is also disabled by my system administrator.

Anyone have any ideas? Also, how do i move an ntsf partition?†

Posted On: 2010-01-04 . View Related Posts . . View 5 Replies .

Cannot Complete System Restore

When doing a system restore i get the message that system restore did not complete and no files were changed. I'm running windows 7 on a 64bit computer. I have tried doing a restore from safe mode, from a dos prompt and i have uninstalled my virus protection and firewall and still no luck. My system is operating properly in all respects. I was running some media server software named playon and was having some issues so their tech support told me to change some networking options. I had to uninstall that software and now it will not let me reinstall so i am trying to do a system restore to a point before i changed the network settings.

Posted On: 2010-06-26 . View Related Posts . . View 8 Replies .

System Restore Problem

I'm running windows 7 home premium. Up till recently, as far as i know, i've been able to restore from restore points but recently i had problems installing a program and was unable to uninstall it. I tried system restore. On reboot i got a message "system restore failed to extract the original copy of the directory from the restore point". I've tried other restore points but still get the same message. You can see the actual message window here

http://s8.¤t=systemrestorefailure.jpg .

I've run the system file checker with no problems found and checked that volume shadow copy is running and starts automatically. I've also tried switching sr off and then on but it makes no difference.

Posted On: 2010-03-20 . View Related Posts . . View 5 Replies .

System Restore And Updates

I have been trying to uninstall windows liveone care safety scanner because†i mistakenly downloaded it and it does not work for windows 7 64 bit computers. It†would not†uninstall. So i tried restoring my computer to†an earlier time. Two questions: the liveone safety scanner is still there and i still can not uninstall it. Any suggestions on how to get rid of it?

The restore point was before the latest windows†updates. Would the updates have been deleted by the system restore? I checked to see if i have the latest updates and i do, but i don't understand how that is possible. Any explanation?

Posted On: 2010-04-21 . View Related Posts . . View 7 Replies .

System Recovery Failed

Running windows 7 on dell. Kept getting popups and this site unsafe popups. Tried to run malwarebytes and couldn't. I use avg virus. Tried system restore. Failed. Tried pc recovery. It failed. After system recovery failed when i chose to reboot received message on black screen. Loading pbr for descriptor 2. Done. A disk read error occurred. Press control, alt, delete to restart.

When i do that i just keep getting the same screen. Can't get to windows or safe mode. Did diagnostics and received error code 650f:136c. Msg:†ide device failed. Blank media or no media is present in optical drive. Test requires media with data (resource cd, installation cd)†don't have cds as this was supposed to be in computer as system recovery.

Posted On: 2010-02-10 . View Related Posts . . View 5 Replies .

Failed System Image

I'm attempting to use the windows 7 back up and restore feature and get an error message during the creation of the system image:

†††† Windows backup encountered and error when accessing the remote shared folder. (0x8078015b)

†††† Additional information:
†††† The semaphore timeout period has expired. (0x80070079)

A backup without the system image works fine.

Posted On: 2010-01-05 . View Related Posts . . View 2 Replies .

System Restore And Security Updates

Did system restore to a march 22, 2010, as windows explorer had become deadly slow and i was unable to determine why. Seems fine now.

My question is:†do i need to download and install again the security updates for windows xp (professional sp3) released since the system restore date?†Since the sys restore, the add/remove progams list doesn't list†any of†the updates done since feb 10 except hotfix -kb979306 and security update - kb975561) although the microsoft windows update†service online†lists†20 or more that were previously downloaded. I'd appreciate it if someone could shed some light on this for me.

Posted On: 2010-03-31 . View Related Posts . . View 4 Replies .

System Restore Running And Locked Up

Trying to run system restore, it has been initializing for 3 hours i think it is locked up. What can i do? I started to run this because all of a sudden it "usb device not recognized" it is only a usb mouse. I'm just going back 1 day to the closest restore point. I'm afraid to turn it off. It's my daughters 2 month old dell laptop. Windows 7. My computer skills are not much more than beginner. Edit ahead, so i guess no knows an answer to this problem. It is still hung up 1 day later and i'll have to figure out what to do.

Posted On: 2010-02-19 . View Related Posts . . View 4 Replies .

Black Screen After System Restore

I have a samsung n150 its running windows 7 starter and i system restored it. The computer goes through the restore process and seems fine, i put in my password and it goes black, the only thing i can see is the mouse. I can go into safemode and such. I went into safemode with command prompt and tried to system restore again but to find that nothing changed. This netbook doesn't have a disc drive so i don't know what i can do.

All the safe-modes and everything boot a black screen with the mouse visible. When i load windows normally i can pull up task manager and thats visible, and from there i can pull up the internet and everything but the desktop doesn't show up nor does it respond when i click randomly on the black screen and there is not tool bar at the bottom with start and everything.

Posted On: 2010-08-14 . View Related Posts . . View 3 Replies .

System Restore Has Been Turned Off By Administrator

System restore has been turned off by your system administrator. I thought my problem was a easy one but not so. I am logged in as administrator windows 7 ultimate, i went to restore my system files and turned them off by mistake, so that i thought was no problem, i did know that it deletes all system restore files, so off i go again to turn them back on and guess what, it says the administrator had to be informed as they turned them off, after trying many ways of doing this, i resorted to no protection on my uac, this did not help, tried a new uac that did not help either, so now i am on my hands and knees hoping that someone out there can help, after such a simple mistake which i was allowed to do because i was administrator, i have gone to not even being able to†system restore back on without contacting my administrator!

Posted On: 2010-07-19 . View Related Posts . . View 2 Replies .

Lost Office After System Restore

I recently won a computer from microsoft in†their 50 pcs in 50 days drawing. It had windows 7 and microsoft office ultimate pre-installed on it. Then the computer crashed about a week ago and i just got it back working today. I had to do a complete system restore and in the process the office ultimate got wiped off the computer. But microsoft did not provide any installation media with which to re-install the office ultimate but they did provide a windows 7 dvd.

They also did not give me a key for the office ultimate but they did for the windows 7. Now i want the office back but have no way to install it again and also no way to unlock it even if i could install it. Is there any way to resolve this problem? Is there a way to get a key and installation media.

Posted On: 2010-02-15 . View Related Posts . . View 4 Replies .

System Restore Error 0x80070005

The futuremark benchmark 3dmark vantage includes two installations. After the install, i found that futuremark's registration hurdles were not worth my effort. Instead of a simple uninstall i ran system restore and picked the restore point created by the 3dmark vantage installation [restore point 1]. Upon restart the system restore message box stated, "system restore did not complete successfully.system files and settings were not changed.

System restore could not access a file. Probably because an anti-virus app is running. Disable and retry. Unspecified error. (0x80070005) try again and choose a different restore point. "
Next i uninstalled the two futuremark installations without error. Then i tried sr using the same restore point getting the same error message. Then i tried sr using a convenient restore point from three days prior [restore point 2] but also got the same error message.

I do not use an anti-virus program. Next i disabled windows defender and uac, and restarted in safe mode. I tried sr using restore point 1 but i still get the same error message. It may be that system restore was never run before today (2010-04-11) on this mid-december 2009 installation of 32-bit win 7 hp upgrade. I will think on it. I have used sr by necessity several times in xp on this same desktop [asus m2n32 sli deluxe] and once on my wife's vista laptop.

My system and data partitions are backed up. But i really do not want to re-install the operating system. Win 7 hp upgrade is an annoying installation. Hopefully microsoft has advanced past the tiresome fix all "re-install windows" mantra. Please can anyone show me the procedures to allow system restore to change the registry and files?

Posted On: 2010-04-12 . View Related Posts . . View 4 Replies .

System Restore Error 0x8000ffff

Iím trying to do a system restore in win 7 32 bit.

I keep getting the following from all the restore points i try.
"System restore did not complete successfully. Your computerís system files and settings were no changed.


System restore failed to extract the file (c:) from the restore point. An unspecified error occurred during system restore. (0x8000ffff)

You can try system restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see what is recovery?"

Posted On: 2010-02-16 . View Related Posts . . View 5 Replies .

Unable To Complete System Restore

Every time i try system restore to earlier day i cant because†i have antiviruse programs running i turned norton off i still cant i was going to restore because i have all my files opining under one program like every thing is trying to open under i tunes i can go to open a file under a certain program but then my whole computer changes to that† program i have 10000 little i tunes icons on my computer now.

I cant restore because it says i have anti virus programs running i turned off norton and i cant find any more it still wont let me restore to earlier day.

Posted On: 2010-05-09 . View Related Posts . . View 5 Replies .

System Restore Points Problem

I'm having problems with system restore on my computer. I had a post about my earlier problem in a different forum on this website, my post was:†"i'm using windows 7 ultimate, microsoft office 2007 and my printer is epson lx-300+. I had no trouble printing anything before until now, i can't get my printer to work. I thought it was a driver issue so i reinstalled it but still won't print.

I recently discovered that after i click the ok button to start printing, there at the devices & printers page, specifically at see what's printing page, the document for printing won't show up anymore, it always shows up there if i print something. "

"Strangely i discovered that, if my printer is not connected to the computer, the document shows up at the see what's printing page with the status as printing though my printer is off but as i turn on the printer the document for printing disappears and as i try to print again, it won't show up as long as the printer is on & connected. "†I was about to try system restore to restore my settings to an earlier date but oddly enough i can't access any restore points, it says that there are no restore points available. I actually discovered my problem with system recovery a month ago, i had the enabled the "monitoring" option for system restore on my 2 drives both ntfs format.

I can manually make a restore point but whenever i restart my pc all restore points are gone. This happens over & over again. My system does make restore points when changes are made like when uninstalling programs but when i restart my system, like i said, all restore points are gone but the settings remained untouched like my drive can't store restore points, i did allocate 2 gb of disk space for it (i have a 40 gb drive partitioned to 30 & 8 gb. Have you encountered anything like this with windows 7 ultimate?

Posted On: 2010-04-15 . View Related Posts . . View 4 Replies .

System Restore Point Failure

I have been unable to use the window 7 restore point function in the expected manner. Along with other participants in this forum, when i attempt to restore my system to an earlier state i received a message stating "system restore did not complete successfully". Error 0x8007005 is being reported.

On the basis of responses to similar inquiries on this forum i have unsuccessfully tried to roll back my system to an earlier restore point by:

. Disabling (but not uninstalling) my virus protection software.
. Performing a selective startup
. Booting in safe mode.

In safe mode i was unable to access (or even find) the system restore screen from the control panel or by using a desktop shortcut that is available after a normal boot. My attempts to use system restore in this instance are of a routine nature but i want to have a workable procedure available if a critical need arises. I would also like to use system restore for non-critical housekeeping as well. In this situation i do not see uninstalling/reinstalling my security software or booting into safe mode as viable options.

As system restore is a key system security function in windows 7, i would very much hope that a simple, robust solution to the reported problem is available. I am using window 7 ultimate on a dual boot system (along with windows xp).

Posted On: 2010-03-08 . View Related Posts . . View 4 Replies .

How To Create More System Restore Points ?

How do i create more system restore points? I needed to do a system restore to correct an issue i was having. Looking through the list of available restore points, the list only went back 14 days. Is there a setting i can change to have restore points be available for a month or so?

Posted On: 2010-02-26 . View Related Posts . . View 7 Replies .