Advertisements:




Can't Connect Canon Mp500 Printer Through D'link Print Router


I'm running windows 7, i have a dlink wireless print router and my mp500 canon printer is connected to it. How can i get my new toshiba satellite computer to connect to that router so i can print documents. Can't connect to printer through dlink print router from my laptop.

View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Printer Error With Canon Mp500

I installed windows 7 (64-bit), and am now having problems printing with my canon mp500 printer (previously ran fine with windows vista). I've installed the 64-bit drivers for windows 7 from the canon printer web site, but get the following message every time i try to print: "cannot communicate with printer. Turn enable bi-directional support on in the printer's properties dialog box. "

The error message pops up every time i print, but i know the printer is connected because i can print documents from my computer (word files, etc). However, i cannot print anything from the web. I just get a page with the header/footer and blank in the middle. I checked the dialogue box for the printer, but don't see where to change the setting to correct this problem. Can you offer any suggestions?


Posted On: 2009-11-21 . View Related Posts . . View 3 Replies .

Laptop Does Not Connect To Printer Connected To Wireless Router

Windows 7 wireless laptop does not connect to printer connected to netgear wireless router the printer must be restarted every time i want to print from the wireless windows 7 laptop (through the use of the printer on/off switch. ) The hp 2820 mfp printer has a network card and is connected to the netgear dgn2000 router. I have used the built-in troubleshooting devices from the windows control panel but the problem continues. (Note the laptop was upgraded from vista and the printer worked ok. Also the router was upgraded from an old 2-wire router that died. So, unfortunately i have two variables).

Posted On: 2010-01-01 . View Related Posts . . View 3 Replies .

How To Connect To Canon Ip4000 Printer On Network ?

How to connect to canon ip4000 printer on a windows xp machine from a windows 7 machine on the same home wireless network. Using add printer on the windows 7 machine i can see the printer but i get an error saying that a driver cannot be found although the correct driver is available on the machine. I have no problems connecting to the same printer from a notebook running vista or if i attach the printer directly to the new machine. I've tried loading the windows 7 driver on the xp machine but that didn't seem to work either.

Posted On: 2010-01-21 . View Related Posts . . View 2 Replies .

Cannot Print To Network Printer Canon Mp620

Windows 7 laptop cannot print wirelessly i.e. When i first upgraded the laptop, i set up wireless lan on the printer, and it was fine - after two days, the printer was still detected, but nothing would print: no error numbers, simply no documents showing in the print queue. Uninstalled and re-installed all the printer drivers - now it will only work via usb. Any help please, n. B. I am not a very 'techie' person. Thanks in advance p. S. I did try the local port and computer name, etc. Suggestion above - didn't workfor me ( maybe i did something wromg, though).

Posted On: 2010-01-30 . View Related Posts . . View 2 Replies .

Xp Can't Print To Win7 Shared Canon Printer

Before i upgraded to windows 7 i had a shared canon ip4300 running under vista this all worked fine. Now i have upgraded to windows 7 64. When i try to attach to the shared printer from win xp i get the message that no suitable printer driver exists then it asks me to point to a printer driver so i browse to the inf file but then i get the message cannot find a suitable printer driver. Yet its installed on the windows 7 pc & the xp machine & it works if i install a local printer.

Posted On: 2010-01-04 . View Related Posts . . View 7 Replies .

Canon Printer Bjc 2100 Installs But Wont Print

I have an old canon bjc2100 printer connected to the computer via usb, currently running windows 7 64-bit, the computer accepts the printer and i have downloaded the drivers through the in-built windows updater but when i go to print the documents it idles for a few minutes and displays an error-printing message. The size of the file is 240kb but in the printing window the size shows automatically as 8. 40mb/10. 5mb but doesn't move.

A troubleshooting message appears on the printer icon in the device manager and i have run the troubleshooting wizard which tells me "a print job in the print queue is preventing other print jobs from printing" and tells me it's "fixed" the problem, but when i try to print another document it is coming up with the same error-printing message. Does anyone have any solutions to this problem?


Posted On: 2010-04-06 . View Related Posts . . View 2 Replies .

Unable To Connect To Print From Network Printer

After upgrading to windows 7, unable to connect to homegroup & not able to print from network printer. Windows 7 upgrade from vista loses network connectivity to windows xp, and mac osx computers and can't connect wireless network printer. Hi, i have recently upgraded my laptop from windows vista to windows 7. While working in vista i had access via a network named mshome to our other windows xp laptops and 2 macs running osx as well as our network laser printer (lexmark c530dn).

Now my laptop can't see the other laptops or macs but can still print to our network printer, and obviously access the internet. I'm guessing that i'm going to have to setup a new network in order to see our other machines. In addition, i have recently purchased a wireless multifunction inkjet printer (lexmark s400 series). The xp laptops and osx machines can print etc. While my windows 7 laptop won't.

The software is installed, latest drivers downloaded, and the printer status is ready but it won't even print a test page. If anyone could give me some advice about the best way to set up a new workgroup (or reconnect to our old one) and get my new printer working i would be really grateful. As you can imagine, i'm now more than a little frustrated with it.


Posted On: 2010-08-03 . View Related Posts . . View 4 Replies .

Print Spooler Error - Windows Cannot Connect To The Printer

I hook up the printer and i let the pc automatically upload the drivers and the printer's name is recognized and then when i try to print i got this message " window cannot connect to the printer. The local printer spooler service is not running. Restart the spooler service or restart the machine.

Posted On: 2010-05-20 . View Related Posts . . View 2 Replies .

Unable To Connect To Wireless Router

I just purchased an hp mini with w 7 starter two months ago. Until yesterday i have been able to connect to my actiontec m1424wr router. After running win network diagnostics it says there is a "problem with the driver for the wireless network adapter". I can't get online to help and support for further diagnostics because i can't connect to the internet(catch 22). The taskbar shows my router is available with "limited access". I also have a dell laptop w/ xp and have never had a problem connecting. I have performed some of the ideas from one of the threads on this forum including the shutdown of the netbook and router and then powering them back up. I am not real tech savvy but really need some help with this.

Posted On: 2010-06-29 . View Related Posts . . View 2 Replies .

Win 7 Will Not Connect To At&t Wireless Broadband Router

I am using a new computer, dell latitude running windows 7. The thing will not connect to my at&t wireless broadband router. I can find nothing wrong with the router. It was working with my old windows xp machine so what has changed is the operating system.

Posted On: 2010-05-08 . View Related Posts . . View 2 Replies .

64-bit Pc Wired To Router Suddenly Cannot Connect To Network

Win7 64-bit desktop wired to a router suddenly cannot connect to the network. Win7 64-bit laptop connects ok wireless as does a vista wired laptop. When i checked the dhcp client service it is stopped and will not start/stay running - access denied. It is set to automatic in msconfig.

Posted On: 2010-06-02 . View Related Posts . . View 2 Replies .

Install Canon Mp390 & Canon Lbp2900 Laser Printer

How do i install my multi function device canon mp390 & canon lbp2900 laser printer on my windows 7 64-bits.

Posted On: 2010-01-28 . View Related Posts . . View 4 Replies .

Printer Problem - Print Job In Print Queue Is Preventing Other Print Jobs

Cannot print from new laptop to shared printer - "a print job in the print queue is preventing other print jobs from printing". I recently bought a new laptop and want to print to a printer (hp color laserjet 1600) i have shared over the network from a windows 7 (x64) machine. When i try to print from my laptop it stays in the print queue and i have to run the troubleshooter on the host computer to resolve the issue and allow it to print.

If i run the troubleshooter on the laptop it tells me it could not identify the problem while on the host it tells me "a print job in the print queue is preventing other print jobs from printing" and it says it fixed the problem and prints the document but i have to do this every time. I also have this printer added to a laptop and a netbook and they both print the document just fine and have no issues. The laptop i am having the problems is running windows 7 (x64).


Posted On: 2010-07-20 . View Related Posts . . View 8 Replies .

Cannot Print From Canon Pixma Ip4300

I have a canon pixma ip4300 printer and cannot get my asus laptop to print to it. The printer is installed correctly with upto date drivers and is showing in the printers and device area but when it goes to print it says that is collecting the data and takes ages and then a popup comes us saying there is an error and tells me to cancel. I have tried troubleshooting but that is coming back with no errors. The printer was connected to an acer laptop that was running vista but i have since removed it from that machine thinking that might have been part of the problem but is still wont print.

Posted On: 2010-06-19 . View Related Posts . . View 12 Replies .

Hp Inkjet 2230 Printer - Print Jobs Stuck In Print Queue

Print jobs stuck in the print queue and will not print on windows 7 64-bit driver for hp business inkjet 2230 printer. I have installed the current hp universal printing pcl 5 driver on my windows 7 64-bit os. When i try to print a test page on my hp business inkjet 2230 printer (usb to parallel cable connection) the job hangs in the print queue. I can run the troubleshooter and purge the spooler but then i'm back where i started. The next print command will result in the same error.

This appears to have also been a problem with windows vista (64-bit). Suggestions to remedy the problem are welcomed.


Posted On: 2010-01-21 . View Related Posts . . View 2 Replies .

Canon Mp620 Printer

Iam using a canon mp620 printer networked with 2 laptops and a pc. The pc runs xp and the two laptops previously ran vista home premium - no problems. Since upgrading (!) To windows 7 ultimate on the laptops, the printer will not run with any machine via wireless/networking, and will work with the xp pc via usb and with one of the laptops only, also only via usb. The laptops and the printer can identify each other wirelessly , and say that they are linked and working until i try to print anything - then, after the print queue, nothing happens.

Control panel shows a 'troubleshoot' message by the printer. One laptop will not work even when connected by usb. I have downloaded new drivers from canon. Any ideas, please - preferably not too technical, if poss.


Posted On: 2010-04-20 . View Related Posts . . View 2 Replies .

Cannot Connect To Printer - Printer Processor Does Not Exist

I am trying to connect to a printer on my home network. Laserjet 1020. Which lives on another windows 7 computer. It works fine on its "home" win 7 windows cannot connect to the printer. But when i try to network i get this message. " Cannot connect to the printer. The printer processor does not exist". I downloaded a new driver from hp with no success. Any suggestions.

Posted On: 2010-02-11 . View Related Posts . . View 2 Replies .

Printer Error Message - Cannot Print Problem With Current Printer Setup

This is a network printer and works for everything else except my word program and my windows program. I have rebooted my computer and i have turned printer off and on (although it is printing for others and for me for our work program which is not word-based or windows-based). Can you help me?

Posted On: 2009-12-14 . View Related Posts . . View 2 Replies .

Canon Mf4350d Printer Not Working

Canon mf4350d. Can't get printer to work with plug-in-play software. Tried reinstalling the software from canon, but still nothing. Any suggestions?

Posted On: 2009-12-05 . View Related Posts . . View 2 Replies .

Canon S200 Printer Issue

Canon s200 printer has updated windows 7 x64 driver, is compatible with windows 7, is shown as default printer, but when attempting to print a page it has no response and acts like it is not even there.

Posted On: 2009-12-01 . View Related Posts . . View 2 Replies .

Canon Mp980 Printer Problem

Mp980 i can't get it to print! It keeps saying the printer is not responding and at time when i check in the device manager, there are yellow? For the printer but i can't do anything with it. How to fix?

Mode: canon mp980
Os: windows 7 64bit
Connection: wireless

I have canon mp980. Everything is installed and they communicate! Even the card reader is readable from my pc using the printer as the card reader. Everything is wireless and previously before migrating to windows 7 from xp pro, the printer was already connected to my router thus it has ip and everything.


Posted On: 2009-10-21 . View Related Posts . . View 3 Replies .

Canon Mpc200 Printer Issue

I'm using windows 7 and have installed the latest driver available for the canon mpc 200. I can see the the driver has been successfully installed in the device manager window. The device status also shows that "this device is working properly. " However, when i go to the control panel to "add a printer", the exact device name is not listed there, so i selected what seems to be the nearest match i.e. "Canon inkjet mp21 series. "

When i tried to print a test page - nothing happened. (Even though the driver i installed has the exact name has the printer - i can't understand why it is available in the droop down list of available printers. ) So, i tried adding it as a new device but it wasn't identified.


Posted On: 2009-11-25 . View Related Posts . . View 2 Replies .

Canon Ip3000 Printer Problem

I have a problem with my printer canon pixma ip3000 on windows 7 installation. The printer is connected properly and works fine with windows xp installed on another partition of the same computer. On the windows 7 partition the printer is shown on the printers window, all properties look correctly, but no action is sent to printer (like printer cleaning, test page printing). When i try to perform any operation, the action appears in the printer queue for a while and then disappears but nothing happens on the printer. I have downloaded the latest driver from canon web page.

Posted On: 2009-12-02 . View Related Posts . . View 3 Replies .

Canon Ip6600d Printer Problem

I have upgraded my computer from vista to win7 and have a compatibility problem with my usb canon pixma ip6600d printer. The printer worked fine with vista. My computer is a dell xps 435 mt which uses the intel i7 processor. As soon as i turn the printer on, i get a blue screen stop. The system goes into a diagnostic mode immediately with the following results.

Problem event name: blue screen
Os version : 6. 1. 7600. 2. 0. 0768. 3
Bcc code: a
Bcp1: 0-138
Bcp2: 0-02
Bcp3: 0-0
Bcp4: fffff80002232dcc
Os version : 6_1_7600
Service pack: 0. 0
Product: 786-1
Files:
C:windowsminidump


Posted On: 2010-02-20 . View Related Posts . . View 3 Replies .

Problem With Ip90 Canon Printer

I have installed an ip90 canon printer and it will not print, i have removed and then re-installed the printer driver which was downloaded from the canon website and even after sending the printer test pages from 2 different computers the printer, which by the way has jus been completely rebuilt by a reputable printer service person, still will not print. I have tried to update the driver and i keep getting a message that says document sent to printer (which by the way said it was ready) it does not print. Oh, the printer will print when not hooked up to a computer.

Posted On: 2010-08-05 . View Related Posts . . View 2 Replies .

Canon Multipass F50 Printer Compatibility

I'm considering the purchase of a computer with windows 7. Is there a driver for my printer canon multipass f50? I have office professional for xp - can i load the office software on the new computer with windows 7?

Posted On: 2009-10-28 . View Related Posts . . View 2 Replies .

Canon Pixma Ip4000 Printer Problem

Windows 7 64 bit laptop on wireless network cannot find . Inf printer driver for canon pixma ip4000 wired to windows 7 32 bit pc. New win 7 64 bit laptop connected wirelessly in a home network through a netgear wndr3700 router. Wired to the router is a pc with a usb attached canon ip4000 printer. This printer has worked flawlessly with this pc for years. Add the laptop. Attempt to access the printer over the network (it is set to share on the pc) results in a failure to find the driver for the printer.

At the canon download site, i have downloaded and installed on both machines the driver add-on "aomwin110ea23us.exe". This does nothing to solve the problem. Then, following the suggestions in the above referenced thread, i downloaded 7-zip, installed it, and unpacked the canon add-on file.

Guess what? - There is no, none, nada, stupid ". Inf" file in there! I understand that i need to set advanced sharing on the pc to both x32 and x64, but without a valid . Inf file to point to, i am sunk. And the same thing is true when trying to add the printer to the laptop - no . Inf file to point to. The one thing i have not tried is installing the printer directly to the laptop via usb, and that is because that is not a usable configuration for me.

The printer must be attached to the pc. Is there anyone out there who can help me solve this dilemma? Please do not give me an answer that tells me to generally download the driver - you have to tell me specifically what driver, then walk me through the process.


Posted On: 2010-06-20 . View Related Posts . . View 4 Replies .

Can't Get Canon I470d Printer To Work

I can't get a canon i470d printer to work with 7 - troubleshooter is out of ideas and i've downloaded the official driver. I don't know why it won't take my post?

Posted On: 2009-12-08 . View Related Posts . . View 2 Replies .

Cannot Install Canon Ip6700d Printer Driver

I have windows 7 64 bit set up with a canon ip6700d printer. I set up the printer to be shared on the network with another pc running windows xp 32 bit. When setting up the sharing options>additional drivers, i point to the x86 file: ip6700d. Inf located on the printer install disc. When i attempt to install the driver i get the message: "the specified location does not contain the driver canon inkjet ip6700d for the requested architecture" i have verified that it is the correct inf file by opening it. The following is the header info:

; Ip6700d. Inf (for windows x86 monolithic driver)
;
; List of supported printers, manufacturers
;
[Version]
Signature="$windows nt$"
Provider=%canon%
Classguid={4d36e979-e325-11ce-bfc1-08002be10318}
Class=printer
Catalogfile=ip6700d. Cat

Attempting to install the driver on the xp machine fails as well with the same file, when i try to add it as a network printer. Is there something i am missing?


Posted On: 2009-11-05 . View Related Posts . . View 14 Replies .