Advertisements:




Scsi / Raid Host Controller Problem


Whenever installing windows 7, it will be very close to finishing the installation, and terminate.
Earlier on in the installation it says that the scsi/raid host controller will not work once upgraded. I have upgraded the appropriate drivers, as well as several others; upgrading my bios has not helped, as others have claimed it worked for them.

Windows 7 update advisor sites the marvel miniport driver (which should be up-to-date) and steam to being two problems needing correction; other than that, nothing.

System information:
Currently running windows vista (service pack 1), bios has been updated
32-bit os
Oem computer
Dell xps, m1530

Sata (i believe) - one of my drivers does say sata in the name (said driver, intel (r) 82801em/hbm sata ahci controller may be out of date. )




View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Ricoh Mmc Host Controller

Hello, not much of an error or anything but, i've been planing on upgrading to win7 from a vista. And no other problems have happened and all the sudden i get a message saying this on the windows 7 upgrade advisor. http://i50. Tinypic.com/33z3alf.jpg

The only recent thing i did was download a game (ijji) and decided to remove before upgrade (i removed the restore point) which i know i shouldn't have done. I just want a little information. And if i should upgrade or clean install (upgrade is available for my system) but just to make a new start or not.


Posted On: 2010-02-13 . View Related Posts . . View 2 Replies .

Intel Usb Host Controller Drivers

I installed windows 7 on an ibm thinkpad t41 laptop. I realize that this is an older laptop and is not the best choice for windows 7. However, i first installed the rc release on it (a little while back) and everything (except for areo, etc) worked just fine. Now, with this new fully licensed copy of 7, the drivers for the usb host controller are not loading correctly. They appear to be present, but they are not working. In device manager, there is a yellow ! Next to each entry under usb, and inserting a usb drive produces nothing.

I first asked intel about it. They said it is a microsoft issue. They said they manufacture the host controller, but microsoft makes the drivers. This is an intel 82801db/dbm enhanced usb host controller and there are 4 or 5 similar entries for it under usb in device manager.

I don't know why it would work without issue when using the rc and not this new installation. I have disabled, and completely removed the device/drivers from within device manager and rebooted to allow windows to reload the device(s)/driver(s) but that didn't help. I have tried downloading driver installations from intel and that also did nothing for me. I have checked windows update several times manually, and using the update driver button tells me "windows has determined i have the most current drivers".


Posted On: 2010-03-05 . View Related Posts . . View 10 Replies .

1394 Host Controller Driver Quit Working

Two days ago i was going to put some video on my computer from my sony handycam minidv camcorder using a firewire connection. I plugged in the camera with the firewire and windows 7 automatically installed the driver and it was successful and everything worked great. The next day i was trying to continue my work on it and when i plugged in the camera it says i need to troubleshoot the driver. When i do that windows 7 tries to fix it and of course fails. Is this a common issue with drivers on the vista/windows 7 platform? Does anybody have any tips?

Posted On: 2009-05-25 . View Related Posts . . View 2 Replies .

Ieee 1394 Host Bus Controller Missing

I have a new dell latitude e6510 with an ieee 1394 ("firewire") port-the small 4-pin type. Soon after getting the laptop, the 1394 port worked fine with an external drive. Once i got an esata cable, i started using that drive via the laptop's esata port. A week or so later, i tried to install a digital audio interface via the 1394 port and it didn't work. Naturally, i checked the device manager, but the ieee 1394 host bus controller was missing from the tree. I am running windows 7 professional x64. I knew that a new bios update was coming from dell so i waited a few days and applied it today. Still no 1394 host bus controller.

Dell at first thought that there was a problem with the motherboard. But i used the pre-windows boot dell diagnostics utility to test the 1394 controller and it passed three tests even noting that there was no device plugged in. I then plugged in a digital audio interface and reran the tests. Again the controller passed all 3, and noted that a self-powered device was plugged in. (Incidentally, i did try the same external hard drive again via the 1394 port just to be sure that it wasn't the audio interface that was the problem. Again, no go. ) Dell now agrees that there should be nothing wrong with the motherboard (and, thus, the 1394 port) given these passed tests. So, dell recommends a fresh install of windows.

But that doesn't seem right to me. Of course, i'm not terribly keen on having to reset all my settings, reinstall software, etc. But, isn't there a way to get this device to show back up in the device manager without having to reinstall windows? (Yes, i clicked the "scan for hardware changes" button. ) Or is there a way to somehow to otherwise patch windows so that the port is recognized and thus operable again?

Edit: having browsed the other posts before posting mine, but now having reread them, it occurs to me that i should note that my win 7 install came with the computer.

Thus it is not an upgrade; similar posts to mine all address the scenario involving an upgrade. Not sure if the solution is different. Thanks again. Next day edit:i did end up getting the system to "recognize" a new unknown device. Whether that's the firewire controller is still up for debate. I did so by going to the dell support site and just started downloading and installing what was listed for my machine regardless of date (e.g. , Installing some applications which predate my machine's manufacture date).

Maybe not the most informed strategy, but my thinking was "what the _. Nothing else is working. May as well give it a go. " I got through the first 7 listed in "applications" before rebooting. After the reboot, an unknown device appeared in device manager. I then tried to update the driver for said "unknown device" by selecting an 1394 ohci compliant driver. Windows warned me that it couldn't verify that it was compatible with my hardware by i pressed forward and: bsod! Yeah. However, upon the reboot, the device listed itself as a 1394 host bus controller in device manager. Whether that's because it's what it really is or just because i tried a 1394 driver, i'm not sure; but i suspect the latter.

In any case, i tried several of the other 1394 drivers, including the legacy one and a ricoh driver (because the dell diagnostic utility listed it as a ricoh 1394 controller). In every case, bsod. Sweet. Any suggestions about which driver to install or another approach?


Posted On: 2010-06-02 . View Related Posts . . View 5 Replies .

Raid Controller Issue After Upgrade

I have a custom built machine. My motherboard is an asus p5gd2 with american megatrends bios dated 2004. Recently my hard-drive died, but i had winxp home premium backed up on a smaller drive. I purchased a western digital caviar black 1tb sata drive and migrated xp onto it using an acronis utility. After updating xp to sp2 i installed vista home premium. I then proceeded to update it to sp2 and then attempted to install windows 7 upgrade and that's where the problems began.

Windows 7 tells me to update ite it8212 ata raid controller, but vista says it's the latest. The driver is 1. 7. 2. 7 dated 11/05. In cmos the sata drive is configured as an ide, the only way it will work. I read all the info in this forum i could find, deleted a virtual drive that seemed to plague others, but to no avail.

I've seen this problem all over the internet and even found a guy who solved it, but he had a different bios and i have been unable to get my hands on the seemingly mythical 1. 7. 2. 9 { http://www.Windowsdailynews.com/2010/01/25/successfully-upgrading-your-raid-drivers-in-windows-7/} is the link to this enterprising person's tale of terror, and frankly i'm not sure i could pull it off.
Is there something about a sata drive causing this?

Is my bios outdated? Is my controller card outdated? I had windows 7 on the recently deceased drive, but it was pata. Hmmm. Anyhow, i will check for an answer next week when i return.


Posted On: 2010-04-11 . View Related Posts . . View 2 Replies .

Areca 1680ix-12 Raid Controller Card

When i entered my areca 1680 ix-12 raid card into another "windows" information site, it indicated that this card was compatible with 64 bit windows 7 and that drivers did not need to be loaded. When i installed 4 different windows 7- 64 ultimate os's on a raid configuration providing 4 volumes to run multiple boots in raid 0, i had to load the driver an areca driver otherwise the install screen for loading windows 7 shows that there aren't any partitions to load to. Areca gives two choices - storport and scsi.

I am having an issue with the pc that has this card and is an identical twin to another pc i have except the raid card is a 1210; other than that there is no difference. The issue is below. Areca isn't the easiest site to browse for resources. I love this raid card as it is extremely fast, running an intel processor at 1, 200 and loaded with 4 gb of internal memory. Is anyone using this 1680 card? Have you had any issues?

Any recommendations that have gotten you better results using this card? When i went from vista to windows 7, the only thing that changed on my pc’s was the operating systems. All the hardware remained identical but from that day forward, windows 7 on my areca 1680 pc, does not want to shut down my pc.

It might run for 30 minutes or it might not shut down at all until i manually power it off. But what is strange is that if i wait 2 or more minutes before i manually power off with the power button, on the next start up it never says "windows had an unexpected shut down. Would you like to open in safe mode. ?  I am getting ready to reformat 7 operating systems and any help i can find would be greatly appreciated.


Posted On: 2010-08-19 . View Related Posts . . View 2 Replies .

Mpc / Vlc Freeze / Intel Matrix Raid Controller

I'm running windows 7 x64 with latest x64 versions of vlc & media player classic hc. Every so often when playing video files with either, my system will lock up. If something like music or another video is playing in the background i can still hear it but my screen is completely frozen - mouse and keyboard do nothing. The only way out is to cut power.

I came across this post (http://social. Answers.microsoft.com/forums/en-us/w7pictures/thread/d5cd90f8-edda-46fb-aca7-fd9834f728e5) which seems to assign blame to the intel matrix storage controller which i am using to control my raid-1 array. This thread doesn't really seem to have a fix for the problem, short of using a different player, or an explanation as to why it happens.


Posted On: 2010-03-27 . View Related Posts . . View 2 Replies .

Remove Drive From Raid / Change Sata Mode From Raid To Ahci

Remove a drive from raid then change sata mode from raid to ahci, situation: i have 3 physical hdds: 1 ssd and 2 identical mechanical drives. The ssd stores the win 7 x64 pro installation while the mechanical drives, in raid 1, store data. The sata mode is set to raid at the moment. I want to remove a mechanical hard drive, thus, breaking the raid. Using the intel raid manager interface, i think i will still have all the data on the 2 mechanical hard drives.

Then, i will want to change the sata mode to ahci (1) because i will no longer have a raid (2) i want to enable trim for my ssd. Questions: how will changing sata mode to ahci affect my os installation? Should i change the mode before or after i remove a raid member? Will i have to reinstall windows?


Posted On: 2010-06-19 . View Related Posts . . View 2 Replies .

Minolta Film Scsi Scanner Problem

I have a minolta film scsi scanner, dimage scan dual, and had it working in xp. The only way i could get it working in xp was to load the program as admin/safe mode. Do you have any suggestions as to how i should try and install this in windows 7? Minolta has not supported photographic products in many years. When i first installed it in xp it didn't work. Found a note which informed me that the only way to get it working in xp was in admin (safe) mode.

It was successful. Now i would like to try it on 7 but with the xp installation steps, might there be a suggestion as ti installing it on 7?


Posted On: 2009-10-28 . View Related Posts . . View 3 Replies .

Driver Issue With Scsi Drive Array

Upgrading from vista sp2 to windows 7 home premium. Installation won't proceed due to driver issue with scsi drive array. I cannot proceed with the installation. The installation error message tells me. For these items, make the following changes:

Install updated drivers for the following devices. Open control panel and search for "update device drivers". Disk drives: compaq scsi drive array. I have a hp 1719n desktop computer. I updated the bios. I have gone to the device manager and that item is not that there. There are no drivers with anything like that for a description. Any suggestions?


Posted On: 2009-10-25 . View Related Posts . . View 6 Replies .

Lite-on Dvdrw Lh-20a1l Scsi Drive Isn't Working

My lite-on dvdrw lh-20a1l scsi drive is recognizing the blank dvd-r discs i insert as dvd-rom discs, and therefor will not allow me to burn to them. My lite-on dvdrw lh-20a1l scsi drive isn't working properly. It did when i first installed win 7, 64 bit, but since, as i was installing a burning program, it all of a sudden has started recognizing the blank dvd-r discs i insert as dvd-rom discs, and will not allow me to burn to them. I've tried several windows help pages, and found that this particular drive needs no further update of drivers, apparently the latest driver came with windows. Nyone have a suggestion.

Posted On: 2010-08-06 . View Related Posts . . View 2 Replies .

Raid 0 Does Not Recognize Raid Array

I have a build with 7 ultimate running swimmingly for months with 2 single 1tb 7200 disks and one 128 gb ssd single. Yesterday, i successfully created a raid 0 array of 4x 60 gb ocz ssds in the gigabyte phoenix bios but they are not recognized as a usable array by 7ult. 7ult recognizes them  as an array in devices , everest recognizes them but after booting off the 128gb ssd they are not recognized in 'my computer", are not accessible, and generally are sitting there pretty, but useless.

My idea was to clone the 128 ssd to the array with acronis or paragon and use it as a super fast boot array? Any thoughts. Windows 7 ultimate and raid 0 setup after initial setup. 7 does not recognize raid array.


Posted On: 2010-06-03 . View Related Posts . . View 2 Replies .

Error Using Dvd Burner - Atapi Dvd Drives Listed As Scsi Devices

My atapi dvd drives (dvd rom and dvd rw) and sata hard drive are listed as scsi devices in device manager. Why is that, and is it a problem? I have frequent error when i use the dvd burner.

Posted On: 2009-12-06 . View Related Posts . . View 2 Replies .

Printer Sharing Between Win7 Host And Xp

Printer sharing between windows 7 (printer host) and windows xp. (Additional drivers problem). I have my canon pixma ip4000 installed and working on a windows 7 (x64) machine, furthermore i have a laptop running windows xp (x86). The two pcs find each other in the 'workgroup' and the printer is visible from the windows xp machine as well.

I 2xclick the printer in 'workgroup' and it wants to find the proper driver (x86) to install to the machine. On the windows 7 machine i have to have the driver for the xp machine to find and install. - So i go to the sharing properties of the printer and click the 'additional drivers' button which lets me choose between 3 things; itanium (type 3 - user mode), x64 (installed) and finally x86 which is the one i of course need for it to work with xp x86.

I go and download the canon driver for windows xp x86, and try to add it via the 'additional driver' option, i find the proper '. Inf' from the newly downloaded folder and click ok.

But this message follows: "the specified location does not contain the driver canon inkjet pixma ip4000 for the requested processor architecture. " - Even though i know its the right driver.

How do i solve this issue? Nb: i tried having the driver on the laptop and via the 'workgroup' adding the printer, but it wont work either.


Posted On: 2010-03-08 . View Related Posts . . View 2 Replies .

Html Application Host Has Stopped Working

I get this error message when i try to play a game that has been installed for at least a year with no problem. I have uninstalled and reinstalled with no luck. I am also unable to open windows media player. Nothing happens when i click on it. Lso, when i try to open mcafee i get a blank white box. But it shows in the bottom right hand corner that it is running. I have tried several of the solutions with no luck: ran the sfc/scannow as administrator. Only went to 78% and told me protection could not perform requested operation. Also, went to problems and reports, view history and this is what i found: 

Product
Microsoft (r) html application host
Problem
Stopped working
Date
7/26/2010 12:55 pm
Status
Not reported

Problem signature

Problem event name: appcrash
Application name: mshta.exe
Application version: 8. 0. 6001. 18702
Application timestamp: 49b3ac74
Fault module name: mshtml.dll
Fault module version: 8. 0. 6001. 18928
Fault module timestamp: 4bdfb76d
Exception code: c0000005
Exception offset: 0004ebab
Os version: 6. 0. 6002. 2. 2. 0. 768. 3
Locale id: 1033
Additional information 1: fd00

Additional information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Files that help describe the problem

Version.txt
Appcompat.txt
Memory. Hdmp
Minidump. Mdm


Posted On: 2010-07-26 . View Related Posts . . View 2 Replies .

Wmi Provider Host Performance Issue

When i went to the performance information and tools applet from the control panel, under the "performance issues" section, there was a notice that there was a program causing my (relatively new) system to start slowly. Clicking on it, the message on the dialog box reads "these startup programs are causing windows to start slowly. Name: wmi provider host, filename: wmiprvse.exe, etc. " And it also says that the time taken is 23. 3 seconds-obviously a significant cut.

My problem is, i'm not familiar with what the wmi provider host is, so i'm not sure that i want to remove it from startup. Googling it, i can find lots of information concerning it, but very little actually explaining what it is, or if there's any harm in removing it from startup.


Posted On: 2010-01-02 . View Related Posts . . View 2 Replies .

Virtual Pc 2207 Cannot Access Host Drives

On a vista box, i have a ms virtual 2007 virtual machine running xp. I just got a windows 7 box. I copied over the virtual machine files from the xp box: - . Vhd (virtual hard drive file) - . Vmc (virtual hard drive settings file) i then created a new virtual machine in windows 7 based on the virtual pc 2007 virtual machine; i enabled the integration features and checked all the drives.

Created a new virtual machine in windows 7 based on a virtual pc 2007 virtual machine (from an xp box); cannot access host (windows 7) drives from virtual machine when i then run the new virtual xp machine in windows 7, everything runs fine (and faster as well). The one issue i'm experiencing, however, is that i cannot access the host (windows 7) drives from virtual machine, even though i've shared the drives on windows 7. Btw, if i run the built-in "windows xp mode" virtual machine, i see the host drives when i run windows explorer from within that virtual machine.

What is it that i'm missing?  (Btw, it was a *ton* easier in ms virtual pc 2007; i simply "mapped" a shared drive in the settings dialog and then see that drive when i run windows explorer from within that virtual machine. ) Another thought: should i simply abandon the above, install ms virtual pc 2007 on the windows 7 box and then create the virtual machine with ms virtual pc 2007 (in lieu of the built-in windows virtual pc in windows 7)?


Posted On: 2010-06-17 . View Related Posts . . View 12 Replies .

Error - Pipeline Filter Host Stopped Working

Error "pipeline filter host stopped working" on dell all-in-one printer 968w. My printer, 968w, often gives the error message that pipline filter host stopped working and then will not print. My printer, 968w, often gives the error message that pipline filter host stopped working and then will not print.

Posted On: 2010-07-27 . View Related Posts . . View 2 Replies .

Host Program Files And Users Folder On Different Drive

Does anyone know of a way i can 'host'(maybe the wrong term) my program files folder on a different drive? My setup is a 30g ssd(windows) and a 2tb raid(partitioned d:/ e:/ f:/)

I know you can mount partitions in empty ntfs folders, but is there a way to mount them as the program files folder? Same with users folder so windows acts as though that is the folder?Why wont this f*n thing work.


Posted On: 2009-11-10 . View Related Posts . . View 2 Replies .

Control Wmp On Remote Host From Client Computer

I have a desktop with win7 home premium that is running wmp11. It has attached speakers. This is the "remote host" i have a laptop with win7 home premium. This is the "client" computer. These are connected via wireless network. How can i use the client to control wmp on the remote host. So that when remotely push "play". Wmp will play music from the speakers connected to the remote host?

Remote desktop connection is one possibility (if i upgrade the remote host to win7 professional or higher) but does this give the client control over programs (i.e. , Wmp) running on the remote host? I don't want to stream music from the remote host to the client. I want the client to tell the remote host to play music from it's speakers. How do i do this?


Posted On: 2010-03-20 . View Related Posts . . View 2 Replies .

Dns Issue - Pinging Host Within Child Domain

I'm having some interesting issues with windows 7 dns.

Here are the particulars:

Windows 7 enterprise 32 bit machine, joined to a win2k3 ad. My domain for example purposes is called corp. Example. Info. I have a child domain: prod.corp. Example. Info, and in this child domain
Is a host: "test". So, test's fqdn is: test. Prod.corp. Example. Info. In this particular case "test" is a cname, but the error happens regardless of the dns record type.

My problem is if i ping test. Prod i get host not found. If i ping test. Prod.corp. Example. Info, everything works fine. If i do an nslookup on test. Prod, i get the correct results. If i do an nslookup on test. Prod.corp. Example. Info i get the correct results. (This tells me the records work correctly in dns) i have no firewall on my win7 machine, or anything funky.

I have other operating systems in domain: rhel4, rhel5, winxp, and hpux machines and all of them can correctly resolve "test. Prod" correctly. I haven't tried it on windows fista, as we're not running it here.

My c:windowssystem32driversetchosts file contains no entries, and is not corrupted.

I've tried ipconfig /flushdns, /release /renew, /register/ etc to no avail.

I have a reserved ip address in the dhcp scope for this particular machine, but the machine does get its ip from dhcp (not sure this matters, but including it anyway) all advanced settings on my win 7 ipv4 stack match the functional xp machine's settings.

I've done wireshark traces on both my win7 machine, and the xp machines, and here are my results:

Winxp:

1) client machine sends a request to the dns server (in this case, my domain controller) for "test. Prod"

2) dns server returns a standard query response "no such name"

3) client machine sends a request to dns for "test. Prod.corp. Example. Info"

4) dns server returns a standard query response with the correct record.

On win7:

1) client machine sends a request to the dns server (in this case, my domain controller) for "test. Prod"

2) dns server returns a standard query response "no such name"

At this point, the win7 machine gives up, and returns could not find host.
Naturally, i checked my advanced ipv4 settings, and verified they're identical to the working
Xp machine. Any microsoft gurus out there have any insight?


Posted On: 2010-06-10 . View Related Posts . . View 2 Replies .

Print Driver Host For 32bit Applications Has Stopped Working

Upgraded to windows 7 and installed print driver, now when i try to print, i get this message: 'print driver host for 32 bit applications has stopped working'
 
I just upgraded from windows xp to windows 7(64 bit) and have a xerox phaser 6180mfp. I downloaded the 64 bit driver and installed it. The test page printed out just fine during installation. Now i'm trying to print from word 2003 and from internet explorer 8 and all i get is a message that 'print driver host for 32bit applications has stopped working'. The system cannot solve the problem and i can't find anything helpful on the microsoft support site. Can anyone help?


Posted On: 2009-12-11 . View Related Posts . . View 50 Replies .

Bug - Bsd On Target Host When Connecting To Win7 Shares

When connecting to a network share on a windows 7 professional host, the target host (server) immediately blue-screens. This behavior is repeatable and consistent.

Scenario:

Two windows 7 professional hosts were tested. One host had a fresh load using the hp standard image. The second host had a fresh load using the microsoft retail dvd. Both hosts are members of a windows server 2003 r2 hosted activedirectory domain running in native mode. Default network settings are used on both hosts, obtaining ipv4 addresses via dhcp. Domain administrative accounts were used in all scenarios.

Tests were performed in the following manner:

1) windows 7 professional client to the c$ administrative share on a windows 7 professional target host.
2) windows 7 professional client to an explicit, read-only share on a windows 7 professional target host.
3) windows xp client to the c$ administrative share on a windows 7 professional target host.
4) windows xp client to an explicit, read-only share on a windows 7 professional target host.

In all scenarios, the target windows 7 professional host immediately blue-screens. This behavior could be duplicated 100% of the time.


Posted On: 2009-12-09 . View Related Posts . . View 2 Replies .

Data Execution Prevention Prevent Opening Host Process

I have hp pavilion dv9704tx. Os is windows vista home premium. I have wireless internet connection and i use wireless lan to connect. Recently i installed service pack 1 on my laptop. Whenever i switch on bluetooth to connect to internet i get a message something ssdp discovery stopped working and then "host process for windows services stopped working and was closed" and i have to end the process. Then i get the message that dep has stopped the process to due to security reasons. The network icon on right side of the taskbar shows that there

Posted On: 2010-05-05 . View Related Posts . . View 7 Replies .

Error - Print Driver Host For 32bit Applications Has Stopped Working

"print driver host for 32 bit applications has stopped working" error in qickbooks pro 2009 with windows 7 professional 64 bit. When i try to email an estimate from quickbooks pro 2009 (which uses the quickbooks pdf converter 3. 0 installed in the devices and printers group) i get the following error "print driver host for 32 bit applications has stopped working". Sometimes this also happens when i try to print estimates or invoices using an hp laserjet 1020. Other times i can both email the estimates and print, so the problem is not consistent.

I am using windows 7 professional 64 bit on a new hp dv8t laptop. The problem did not exist on my old windows xp pro  sp3 32 bit machine, it has only come up since i got the new computer with win 7 pro 64 bit (same quickbooks pro 2009 and same hp 1020 laserjet). I have the latest updates from quickbooks pro update, but they did not solve the problem. The problem signature below is from my latest failure to email an estimate.


Posted On: 2009-12-30 . View Related Posts . . View 14 Replies .

Copy Raid Drive To Another Raid Drive

I've been running 2 seagate barracuda 500 gig hdd in raid1. I recently purchased 2 wd cavier green 2tb hdd that i want to run in raid5. I have backed up all my information from my existing drive to my external and create the back up boot cd. When i go to restore the information to the new raid array i get a error message (think it was 0x80042414). I tried then to just reinstall windows 7. Problem 2 happens. It will see the 3. 6tb hdd and will partition only 2tb of the disk space even though it was specified for 3. 6tb. Even still with the 2tb drive the install fails (don't have the error code).
How can i get the drive copied to my new array?


Posted On: 2010-05-16 . View Related Posts . . View 10 Replies .

Pci Memory Controller

Recently, i opened my computer in order to clean it with a vacuum cleaner. But when i turned it on my monitor wouldn't turn on, so i plugged it in the integrated graphics port on my motherboard (sapphire amd 690v) and when i went to devices and printers tab, there was a yellow question mark standing, saying there were no drivers for the device. I searched for drivers, but i couldn't find anything. I have windows 7 ultimate. I do not know what to do, since this is the firs time something like this happens to me. By the way i have a ati hd4670 card in my pci slot. Any help will do, so thanks in advance.

Posted On: 2010-04-02 . View Related Posts . . View 8 Replies .

Setting Up Wireless Zero Controller

I am not very experienced with a pc so i could really use some help i am trying to set up a wireless connection but when i try to connect to an existing connection it will not connect and when i try to repair the connection it says can not repair because wireless zero controller is not connected all this started about a week ago when i called my internet provider and during the trouble shotting they hard me reset something it was something like winstock 32/config or something and since then even if i try to hook up my dsn box still no connection.

 


Posted On: 2010-02-27 . View Related Posts . . View 2 Replies .

Can I Run 32-bit Xp In Xp Mode Virtual Host Under 64-bit Win 7?

Can i run 32-bit xp in the xp mode virtual host under 64 bit windows 7? I have a legacy program (for an alpha smart neo) that communicates via usb, and it is not compatible with 64 bit platforms.

I'm not sure if the 32 bit limitation is in a driver, or in the main manager program provided with the neo. On a related topic, can i load 32 bit drivers in the virtual xp under windows 7, assuming i can run 32 bit xp under 64 bit windows 7?


Posted On: 2010-01-29 . View Related Posts . . View 2 Replies .