Advertisements:




Hp 6110 Printer Stops Printing


Hp 6110 all-in-one printer stops printing one-tenth of the way down the page over & over (using windows 7, netgear wireless print server). We have a netgear 54 mbps wireless print server (model wgps606) that is hooked up to our hp officejet 6110 all-in-one (printer, copier, scanner, fax). We have three laptops printing to the 6110 through the print server. Two of the laptops are older and are running older versions of windows. My new laptop is running windows 7 home premium.

The older laptops have no problem printing to the 6110 through the print server. My new laptop can print to the 6110 through the print server but what happens is that it prints one-tenth or so of the first page, then stops and feeds the rest of the sheet through without printing, then starts reprinting, stopping one-tenth, stops and feeds through. Finally the whole page prints but usually after a bunch of partial pages print. This is entirely frustrating and is wasting a lot of paper & ink. I'm thinking it could be a problem with windows 7. Any thoughts?


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Printer Is Installed But Not Printing

#1: my printer is installed but not printing. It prints once then not again.
#2: i keep getting a message that says framework 2. 0 is not installed but it is and i down loaded it from microsoft and it just would not work. How do i get my computer printer to work permanently. And why do i keep getting a message saying framework 2. 0 is not installed when it is.


Posted On: 2010-01-28 . View Related Posts . . View 2 Replies .

Printing On Network Printer

I upgraded 2 desktop pcs from vista to win 7. Each pc has its own printer directly attached. Prior to upgrading, both pcs could print to either printer. After upgrading, one pc can print to both but the other can print only the printer directly attached however, the printer on the other machine is visible when checking devices on the network. I have gone through checking network names, sharing, reinstalling drivers, deleting and reinstalling the printer with no success. I've even attempted to establish a "home group" but am unable to do so. Any suggestions?

Posted On: 2010-01-03 . View Related Posts . . View 2 Replies .

Printer Not Printing Over Network

I saw a question similar to mine but not quite the same issue. My main desktop is running win7 pro and my laptops and other desktop are running win xp pro. I have set up a work network not a home network, per instructions from a friend in it. All other computers can see the printer and print jobs get spooled to the main computer. The jobs arrive but do not print. Just to clarify, i can print just fine from the main computer. I know there is a tutorial on here for this issue, but the graphics are no longer present, so it's rather difficult to check what the settings should be.

Posted On: 2010-03-23 . View Related Posts . . View 2 Replies .

Printer Not Printing Internet Pages

I recently upgraded from windows xp to windows 7. I have a hp multi-function printer. It is set to print wireless. To date i have no problems printing from my hard drive. Today i was unable to print a page from the internet. For instance, if i make a payment online and the print this payment form page appears, i can't print it. Instead i get a plain page with the web address at the bottom. I've checked the print preview and indeed the page is blank. Any ideas?

Posted On: 2010-05-01 . View Related Posts . . View 2 Replies .

Hp Lj P1505 Printer Does Not Start Printing

I have recently upgraded from xp to windows 7 and my hp lj 1505 no longer prints from any application or from the test page print in printer properties. The driver appeared to install okay and printer is being detected. After sending a print it spools and then says it is printing but printer does not start printing. The "see whats printing" window will say that print is printing and will not disappear unless i delete what i have sent for printing. There is nothing wrong with the hardware as it has been tested with a windows xp pc and works okay.

Posted On: 2010-04-07 . View Related Posts . . View 5 Replies .

Problem Printing Through Wireless Printer Server

Problems printing with hp950c through a d-link dp-g310 wireless printer server after upgrade from windows vista to windows 7. I have a sony vgnz790dib that came with windows vista. I could access and use a hp950c inkjet printer through a d-link dp-g310 wireless printer server with vista. I upgraded to windows 7 yesterday and now cannot use the printer.

A dell xps 1330 running vista works fine. As far as i can tell, the ip address for the printer server on the sony is identical to that on the dell. I ran troubleshooter for the printer and there was no problem uncovered. I then went online to see if others had the same problem but could not find any identical problems. I went to hp online and found that there was an updated software which i downloaded and also connected the printer directly to the sony via usb and still no printing. Any advice on what to do next?


Posted On: 2009-12-18 . View Related Posts . . View 3 Replies .

Printing From Win 7 Through Print Shared Printer On Xp

Have a new windows 7 machine. Have an old xp machine that i have a shared printer  (brother printer mfc 8640d). The 7 machine has the drivers for the printer and will print on the printer when the printer is directly hooked up to this machine. However, when i try to share the printer on the xp machine, it says that it can not find the driver for the printer.

I have tried downloading the 7 driver from the brother website to the xp machine with no luck (they do not have 7 even as an option on their site)  tried putting the printer on the 7 machine and making printer shared from there and then having xp machine print from there with no luck either. Was told that possible i should upgrade to windows 7 professional and this might solve the problems. Suggestions?


Posted On: 2009-10-30 . View Related Posts . . View 9 Replies .

Homegroup Printer Not Printing From Remote Laptop

Just purchased a desktop and laptop both with windows 7 home premium 64 bit. Loaded the print driver for my lexmark x4270 all in one. I can print to the printer when desktop or laptop is wired to the printer via usb, however cannot get the laptop to print via the homegroup network. Sent off a test print to the printer icon id'ed as the shared printer and get a message back that says page has been sent, however nothing printing. I did setup the home group, passwords match, and print sharing turn on. Any idea how i can get this printer working via the homegroup network?

Posted On: 2010-01-26 . View Related Posts . . View 3 Replies .

Dell V505w Printer Printing Problem

I upgraded my dell xps m1330 laptop from vista, ( all printing worked, but slow), to windows 7. I downloaded the updated printer driver from dell, i'm connected both wirelessly and by usb. I also use quickbooks pro 2009. When i first tried to print in quickbooks, nothing would work, no print preview, no printing at all, no access to printer setup. I uninstalled and reinstalled quickbooks, then the printer. I reinstalled the updated printer driver and then used "add a printer". I was then able to print everything in quickbooks. I later tried printing in firefox, like my bank statement, items on ebay, credit card statements, and i can't getanything to print in firefox.

I tried making some changes in internet access settings. I then tried ie 8 and it will print most of the time, but after it does, then ie 8 stops responding, right after printing, and then looks for solutions of which i never have found any. Everything else works fine on both browsers except printing. I have another laptop with the printer driver installed, running vista, and everything works fine. The dell xps laptop and printer worked fine also before i upgraded to windows 7.


Posted On: 2010-01-20 . View Related Posts . . View 5 Replies .

Dell 720 Printer Printing Errors

Windows and dell say that windows 7 (32bit)is not compatible with 720 printer but, on another forum, people say that they have developed a simple workaround. Many people have used this and reply it works great. The procedure is:- 1. Download driver r149368 - i have done this. 2. Open up r149368, however when i go to c:program files/dell720/drivers/ and open it i find nothing resembling r1493678 but many files with strange endings (forgotten word that should be here) such as dlbcaglk. Ou_ , dlbccdrv. Cat, dlbcjswx. Ex_and so on and nothing that calls itself setup.exe that one is supposed (step 3. ) To set to defaults.

Trouble shooting the printer shows nothing wrong, no compatibility problems etc. , But eventually i get to error 0x00000006 which i can find no reference to. If i try to print i get the message "the handle is invalid" with no error number. If i try to sign in to the main home page for windows help there is a drop down list for "state/region" - nothing for canada or ontario.


Posted On: 2010-04-16 . View Related Posts . . View 2 Replies .

Printing To Remote Printer Connected Via Usb To Xp Computer

I am using my c5580 as a remote network printer. The printer is hooked up via a usb cable to my main (xp) server computer. The rest of my (xp & vista) computers are accessing and printing through my wireless network connection with no problem. It is my newly purchased pc with "windows 7" on it. 64 bit that can't print. I setup a new printer by adding a "network printer". It found the hp printer through network search and the drivers loaded ok. When i go to print i get the following message "windows can not print due to the current printer setup, try one or more of the following".

* Check the printer by test page from windows
* Make sure the printer is turned on and on-line - done
* Reinstall the print driver -done

I have loaded all windows updates and went to hp to get the latest printer drivers. Still no luck.


Posted On: 2010-03-21 . View Related Posts . . View 2 Replies .

Print Jobs Submitted From Xp To Win7 Shared Printer Not Printing

Print jobs submitted by win xp to win 7 shared printer never print. I have an hp laserjet 1020 attached to a win 7 pc. The device is shared. A win xp pc can submit jobs to this printer, but they never print. They hang in the queue and cannot be printed unless the spooler is restarted. Prior to upgrading to win 7, the pc was running vista home premium and everything worked fine.

Shutting down the printer or the xp pc will not force the job to print, the only way to get it unstuck is to restart the spooler. This is my last win 7 upgrade issue. Everything else seems to work, but this one is nasty. Hp has been unable to help.


Posted On: 2009-12-12 . View Related Posts . . View 6 Replies .

Network Printing - Remote Computer Says Its Printing But It Does Not

I have two network desktop computers with windows 7. I have a printer attached to one of the computers and was able to print from the other using homegroup. That process stopped working and when i send a document from the remote computer it says it's printing but doesn't. It's like it gets stuck in a loop. Help anyone?

Posted On: 2010-01-25 . View Related Posts . . View 2 Replies .

Standby Problem? In Win7 - Icons Get Huge And Printer Stops Working After Standby

I did a clean install of windows 7 home premium 64-bit. Works great. Until it enters "sleep" mode. Upon wakeup, the hp laserjet 6p printer no longer responds until i reinstall it. Also, the taskbar icons get freekin huge upon wakeup. I called dell who worked remotely and said they'd fixed it - hadn't.
Anyone got a clue on this one?  More to the point, anyone got a fix?


Posted On: 2010-04-13 . View Related Posts . . View 6 Replies .

Hp Hl 4040cn Printer On Peer-to-peer Network Printing Trouble

Have a home peer-to-peer wireless network with a desktop computer and a laptop both running windows 7, both wireless connections to network. The desktop computer can print to our hp hl-4040cn printer with no problem, but the laptop says that it cannot communicate with the printer and will not print. I have reinstalled the print driver and in the process it was able to find the printer just fine during the installation process. I have norton 360 and have checked the firewall settings and they are on for file and printer sharing.

I have compared all of the firewall and network settings of the laptop to the desktop computer that is printing and they are the same. When i use the troubleshooter it tells me the following two things:printer brother hl-4040cn series cannot be contacted over the network.contact your network administrator (that is me). Printer brother hl-4040cn series is not shared with the homegroup.

I tried sharing it with the homegroup, but that didn't fix it and the desktop is printing to it just fine without it being shared with the home group. The laptop should be printing directly to it through the network rather than printing through the desktop anyway.


Posted On: 2010-06-14 . View Related Posts . . View 4 Replies .

After Printing Screen Says "printer Status Not Available"

After printing we get a msg on the screen that says "printer status not available" how do i set windows 7 so the msg printer status not available does not show up every time we print. It is annoying.

Posted On: 2010-01-12 . View Related Posts . . View 2 Replies .

Printing A3 Paper In Printer - Losing Text On A4 Paper

E-mails printing as if a3 paper in printer, therefore losing text on a4 paper. I have recently upgraded to windows 7. Yesterday i when printing my e-mails - normally on a4 paper - i noticed some sentences were being chopped off on right hand side, as if i should have a3 paper instead of a4. I have tried searching printer problems. Any fixes please?

Posted On: 2010-04-20 . View Related Posts . . View 2 Replies .

Printing From 32-bit Xp To Printer Attached To 64-bit Win 7

We have upgraded our main network resource to a 64 bit machine running windows 7. When older 32 bit boxes running xp pro try to send print jobs to the central printer the xp box asks for an inf file. We have reloaded the canon drivers for the xp 32 bit box with no luck as it states it is still missing the driver. Tried to load 64 bit printer driver and the xp box rejected as 64 bit. The windows 7 box will print to the canon printer.

Posted On: 2009-11-30 . View Related Posts . . View 4 Replies .

Printing From Xp Mode

I have read many postings across the internet and the various microsoft offerings and none have solved the issue at hand.microsoft state that when an xp application is invoked seamlessly or xp mode is invoked i should be able to share the native printers that have been set up in windows 7.
This is not so.

It is not possible to "see" the native printers from with xp mode, nor is it possible for the invoked applications to print, nor is it possible to add a printer to the xp mode. I am running on a toshiba t130 which is equipped with a non hardware assisted virtualization processor. I have pressed ahead with the installation of windows 7 and the xp mode etc on advise from toshiba and microsoft. This now represents a significant investment of time and money bot of which are in short supply. Please do not now tell me that hav is essential - contrary to current documentation etc.

Questions :-
1. I have no tools tab on my installation of the xp mode within the virtual machine. Is this because there is no hav present on this machine? Obviously all the tutorials etc refer to this.
2. If this is the case please can someone direct me to correct document for the windows 7 virtual pc and xp mode where hav is not available. - I do not actually believe that any such documentation exists.

3. Please can some one explain how to add a printer to xp mode. I have been through a zillion forums where every one states this is as easy as falling off a log - but to my extreme frustration no one actually explains how this is done. Indeed at this time i do not believe that it can be achieved.

4. In the absence of any ability to print directly from applications invoked from the xp mode what alternative process is available.


Posted On: 2010-04-11 . View Related Posts . . View 3 Replies .

Wireless Printing

I have a new hp laptop connected to an hp ps1315 printer and another new hp laptop (both with windows 7) connected through a wireless network. I have been able to print wirelessly for a couple of months, but all of a sudden, the printer shows "offline" on the wireless laptop, but "online" on the connected laptop. Restarting everything seemed to work the first time this occurred, but will not work now. Is there a way to set the wireless laptop to "printer online"?

Posted On: 2010-02-12 . View Related Posts . . View 2 Replies .

Network Printing

I have a pc running 32 bit vista with a usb connection to my printer. It is connected wirelessly to my home network. It prints fine via usb. I have a new laptop running 64 bit windows 7. It also prints fine connected usb to the printer. When i try to wireless print over my home network, my print job does nothing. The so called network printer can be added on the laptop in the add printer wizard. The host machine has the 64 bit drivers installed for the windows 7 laptop.could it be a port issue? What port should the laptop have assigned to connect to the printer attached to the host machine on the network?

Posted On: 2010-05-20 . View Related Posts . . View 3 Replies .

At 80% Installation Stops Working

I am upgrading vista home premium to window 7. At about 80% of "gathering files, sections, and programs" windows installation stops working. This has happened 3 times in a row. It is time-consuming and frustrating. Can you help ? All i can do is restart the installation from the beginning.

Posted On: 2009-11-08 . View Related Posts . . View 2 Replies .

Fallout 3 Stops Working

I installed the patches and such manually (new to games for windows live and fallout 3 on the pc) i have using factory standard components with this 2009/2010 laptop and i have played eve and wow pretty easily (though i uninstalled most of these games because fallout has a special spot on my pc lol) and heard people say if i run eve on max settings i shouldn't have probs with fallout 3. I have windows 7 os. Everytime i hit new game, it goes to the desktop, says it stopped working (mouse disappears) so i have to ctrl+alt+delete to get my mouse back and have to hit close program. I have done everything it told me to do. I have not put mods or anything in, i have made and connected to gfw as well.

Below is a reply to someone telling me to use system requirements lab.com

I did but i find that it does not support or is compatible with what i have, as it says i can't run command & conquer 3 or any of the other games that i do or did run

This is what happened when i read the read-me file and tried to "update" my drivers and such
Ok about half an hour ago, i actually started to read the readme. It said i should update my drivers and such. I searched, went to dell and got a idt sound thing, and another driver thing for my chipset. But when i did the idt thing for my sound it said restart, i restart, and then it says "windows has encountered a problem and has to shut down" it restarted itself as well. It may have been that death screen but i have never experienced it, what did i do wrong? Did i damage my computer? The sound is fine, i don't know what happened, what do i do?

Here is why i can't do system restore:- the point on restore . Um . I have always tried to restore (only had for a month) and it always says i have too much memory, and i unselect all the optional things to do online restore. It seems fine as of now. I'm really only a computer geek at win95, and partial at that so i'm way new at this computer gaming. It's a dell computer, and my specs are in my profile.

What happens:- i said when i hit "new game" and hit "yes" it begins to load, then about 1 or 2 seconds of loading it crashes, saying fallout 3 has stopped working. I have used laptops with a lot of online games, don't know why f3 has given me these problems. I just spent so much on this and now i think i've screwed up my laptop, i don't know if i'm *** or sad right now. I'm not rich for custom, i'm only a senior in grad school.


Posted On: 2010-08-05 . View Related Posts . . View 4 Replies .

Ie Briefly Stops Working

I've installed security essentials last week. Since then when i go to a website i get a popup that says "ie has stopped working". If i close the popup then it will actually go to that site. Also when i do a search off of google in the upper right hand corner of the screen, it will take me to thomasnet or some other site that doesn't help me at all. I'm using the verizon wireless card and this has not been a problem before the essentials was downloaded. Don't know if this is two separate issues or one is causing the other.

Posted On: 2010-06-14 . View Related Posts . . View 4 Replies .

Calculator Stops Working

New pc (4 mo old) running win7. I keep the calc on my desktop throughout the day and just recently (last week or so) it stops working almost immediately after i start it. I have to go through the task manager to end it. Any other programs running at the same time are are not affected (office 2010, a text expander, and express scribe), as well as avast, msn im, live mail, and a couple gadgets in the background. Last thing installed was office 2010 a month ago and then that incessant adobe update today.

Posted On: 2010-08-23 . View Related Posts . . View 6 Replies .

Photo Printing Programs

I have had really just a few problems with window 7, one of which i'm coming to find out is the lack of the ability to print 4x6 single photo prints. With windows xp and my epson rx595 i was able to print any size under the sun i wanted to. With windows 7, all the compatible programs now will not allow me to print a single 4x6. I went to the epson website and downloaded an updater for windows 7. Still i am unable to print a single 4x6.

I can print 2 4x6's or even better yet 3 4x6's on one sheet of photo paper. This isn't what i want to do, some times yes but i want to use single 4x6 paper so it's easier to print and give out the photos to family. The other way, printing 3 on one sheet, i have to cut it and that takes away time that i could be spending with my granddaughter!


Posted On: 2010-04-11 . View Related Posts . . View 2 Replies .

Status Error Printing

I have installed the drivers for a hp deskjet 720c printer. Everytime i try to print from microsoft word nothing happens. When i click to "see whats printing" under the status bar it says "error - printing".

Further details: i am running windows 7 professional 32bit. I have used this printer on other computers and it works. The printer is switched on. I have connected the printer via usb to parallel adapter. I have installed the drivers for the printer from windows 7.


Posted On: 2010-03-22 . View Related Posts . . View 3 Replies .

Pcl Xl Error When Printing

I have an hp color laserjet cm2320nf mfp on our network. I have a xp device that prints fine, a laptop with vista ultimate that prints fine and a win 7 computer that gets the following message when i try to print.

 Pcl xl error
 Subsystem: kernel
Error:  illegaloperatorsequence
 Operator:  endsession
 Position: 15
 
I don't see other problem/solutions that look similar.


Posted On: 2010-05-17 . View Related Posts . . View 2 Replies .

Envelope Printing Issue

When i try to print an envelope in word 2007, the default printing style comes up as  "headings+" and that seems to be why the address appears as double spaced on the window (and on the envelope) rather than single spaced. The double spaced address will not fit onto my envelope if i leave it as double spaced, plus it just looks bad. How can i get the spacing to revert to single. I've tried changing the default style but that will not adjust it. There are not a lot of options on the envelope print screen.

Posted On: 2010-01-02 . View Related Posts . . View 4 Replies .