Advertisements:




Bug Report Dvd Maker


I have windows 7 home premium x64 with windows dvd maker file version: 6. 1. 7600. 16385 dated 07/13/2009 9:39 pm. When adding titles to be burned, dvd maker shows a time of 150 minutes on the dvd. It can not add mpg files correctly. A mpeg with 1:31 and another mpeg with 45 minutes and another mpeg 14 minutes shows 149 out of 150 minutes. This is incorrect since the blank dvd can only hold 120 minutes. Encoding starts and then there is an error. Nothing is written. I can create the dvd with 1:31 + 14 minutes dvd for 105 minutes.

View Full Post With 3 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Where To Report / Confirm Bug?

i think i've found a bug in windows 7. Where to report or confirm this? This forum?

P. S. To make it more clear, here is the situation:

Title: problem entering backslash character in standard open file dialog

Steps to reproduce
Use any program which uses standard open dialog (i will demonstrate on notepad), make czech keyboard available in the system.
Start notepad
Switch to czech keyboard
Choose file -> open
Try to enter backslash in the filename edit box using right alt /altgr/ + q key combination

Expected
Backslash character ('') appears

Observed
Nothing happens

Known workarounds
Use us keyboard (or other where backslash char. Can be typed directly)
Or
Switch to us keyboard and back to czech - right alt + q will start to work for this instance of dialog


Posted On: 2010-07-12 . View Related Posts . . View 6 Replies .

Windows Dvd Maker Won't Recognize Dvd Burner

Windows dvd maker won't recognize a dvd burner when a internet usb drive is hooked up to computer, how do we fix this?

Posted On: 2009-12-06 . View Related Posts . . View 5 Replies .

Dvd Maker Cannot Create The Dvd

I'm getting this like everyone else on a windows 7 64 bit. The dvd burner is turned on, working, etc. I have 251 gb of free space. The problem is that this error message is so worthless, i.e. No real specifics like "out of space" , "codec error", "invalid input file", "hey, i just don't like you"  . There is nothing to work with. The input is a home movie avi which plays just fine in windows media center. The "just die for no apparent reason" point seems to be 38% in windows media center and 17% in windows dvd maker and the blank disk is kicked out.

If nothing else microsoft ought to build a fix that at least dumps some useful error messages about the failed process so there's a direction to take. At least under dvd maker the status was "encoding" and it dies during that. Windows media center tells you nothing, but the vague error. Oh, yes i did try again after a fresh re-boot and am running nothing else. Same problem.


Posted On: 2010-08-12 . View Related Posts . . View 2 Replies .

Dvd Maker

Win 7. I own this dvd. So i thought i would give this a try before looking elsewhere. "Regular" dvds have about a 4gb or so capacity and so i loaded up about 4 ripped vob files totaling 3. 5gb into the program and it told me it was over capacity. It seems that the program only recognizes 150 minutes. One vob file of only 1gb takes up about 120 minutes. It seems the program will not add files by size but rather by 150 minutes max.

Is this a known limitation of the program or did i do it wrong. Do i need to convert the vob files first in order to fit more on the dvd? Btw the vob files loaded up very nicely, played well and i was able to add transitions etc. But i need a program that will let me write back to disc the 4 + gb capacity of the disc. Tia.


Posted On: 2010-03-24 . View Related Posts . . View 2 Replies .

Dvd Maker Screws Up

I have a brand new toshiba satellite that is preloaded with windows 7. I was so happy to learn that it had windows 7 dvd maker available. Once i started to load some photos for a slide show i went to preview the image slideshow. When the images began to transitions from one photo to the next and pan in and zoom out, some images would decided to kind of skip on the vertical edges. It was almost as though the images where to much for my computer to handle, but i have no other skips with any other dvd maker program, nor when i watch a movie.

What gives?
Any other people seeing this problem?
Signed
Dahsed by the dvdemise


Posted On: 2010-01-04 . View Related Posts . . View 2 Replies .

Previews Problem With Dvd Maker

I made a dvd with windows movie maker and modified it with the options. I did not burn correctly, in fact it made my video choppy and i lost some videos, meaning some of the videos i added did not come out. On the menu format i selected it shows displays of some of the videos i added to my dvd but does not play in the video itself. How can i get the videos that are on the feature menu. I chose the menu style call reflections. On the reflections boxes is where my videos are playing as a preview but not on the dvd i made. How can i get those previews out of there?

Posted On: 2010-06-05 . View Related Posts . . View 3 Replies .

Copy Disc Using Dvd Maker

Ok. Every time i go to windows dvd maker and i try to copy a dvd i made i run into several probs. First, i  have to select "all the files" because nothing shows up under "media/video/picture files" in the d drive otherwise. After selecting everything from my dvd, some of the files still get rejected from being transferred anyway!. Then when i go to click "burn" and it says i need to put in a "blank disc" which i do. After it burns for a minute and gets to about 70% it says cannot burn anymore because of a "invalid pointer. " What is that? Can you not copy a disc using windows dvd maker? If so how?

Posted On: 2010-02-16 . View Related Posts . . View 4 Replies .

Dvd Maker Encoding Error

I'm trying burn some files but the encoding always stops at 0. 6% before generating the following error.

[Window title]
Windows dvd maker
[Main instruction]
Cannot create the dvd
[Content]
An error occurred when burning the dvd.

[Ok]

A bit more background info:

- I'm running windows 7 pro
- I haven't got any other burning software (such as nero) installed
- There are 11 . Vob files to burn
- That's 106 of 150 minutes
- There aren't any effects or customized menu

Has anyone got any suggestions? Searching on the internet shows that there are people who are experiencing the same problems, but i'm not even sure what codecs are and how to check whether i have the right ones.


Posted On: 2010-03-18 . View Related Posts . . View 6 Replies .

Audio Problem With Dvd Maker

After months of trouble free operation i suddenly find no audio on all dvds burned with windows dvd maker. Using windows media player i can view and hear the files ok directly from my hd. I can also play the files ok when i select preview as part of the windows dvd maker process. I do not have windows movie maker installed. I am running oem windows 7 home edition. I thought this may have coincided with the use of proshow gold so i uninstalled that program. I also uninstalled nero 9 but the problem persists.

Posted On: 2010-03-22 . View Related Posts . . View 4 Replies .

Music For Slideshow On Dvd Maker

I am making a video/picture dvd using windows dvd maker. I am trying to add music to the slideshow part of the dvd. When i go to add music it brings me to my music library, then i click that and it brings me to itunes, then i click that and it shows all the albums in my library but when i click on an album to finally get to the song it says the folder is empty. When i look it up on my computer it is there. I am assuming i need to change the file type or something but i am not too computer savy. Please help asap. Need this for a birthday present for tomorrow (1/15/10).

Posted On: 2010-01-14 . View Related Posts . . View 2 Replies .

Dvd Maker Has Stopped Working

Have done more or less everything advicedas answered to earlier questions. I reinstalled one by one codecs, burner programs not windows etc. Checked event viewer and followed instructions, no result. Hereby what i found in the event viewer:

Faulting application name dvd maker.exe version: 6. 1. 7600. 16385, time stamp: 0x4a5bcd10
Faulting module name : unknown
Exception code: 0x0000005
Fault offset: 0x04e2a8ed
Faulting process id: 0x750
Faulting application start time: 0x01caf484db2e20ca
Faulting application path: c:programfilesdvdmakerdvdmaker.exe
Faulting module path: unknown


Posted On: 2010-05-16 . View Related Posts . . View 3 Replies .

Dvd Maker Problem During The Burn Process

I have a sony dvd camcorder (mini disc)and sony vegas movie studio 6 software. Since getting a new laptop with windows 7 i've been having problems with vegas movie studio (i think it may not be fully compatible with windows 7). But it does manage to render my videos to a recognizable format (mpg) so i turned to windows dvd maker, which looks like a great and simple program to use initially. But like many messages on this forum i too had a problem during the burn process - mine only gets to approx. 4% and then comes up with an error message (but the error message displays no detail). What can i do? Is there an alternative? Can i burn a mini disc onto a dvd-r for example? Any help or advice would be greatly appreciated.

Posted On: 2010-03-26 . View Related Posts . . View 2 Replies .

Dvd Maker Avi Files Corrupt

I have just found out about windows dvd maker and decided to give it a go. I tried to insert a file and found out it wouldn't allow me to select an mp4 so i decided to render each scene of my dvd into avi format instead of mp4 but as soon as i try and select them i get this error message:

"0 files were successfully added. 1 file could not be added. The file c:usersedwarddesktopuntitled. Avi is not a supported file type and cannot be imported. "

I installed a codec to try and get it to work but previous to this it came up with a similar error saying that the file might be corrupt.

What can i do as its really annoying me :( i have rendered the video as a wmv and it works but it annoys me because it isn't as good quality as the avi that i rendered.


Posted On: 2010-05-03 . View Related Posts . . View 2 Replies .

Movie Maker Dvd Failed To Burn

Recently did a clean install win7 pro. Windows movie maker was included. I successfully created and saved a movie with wmm and set up to burn a dvd. Got the error msg: dvd failed to burn. Troubleshooting procedures: updated dvd drivers (they were current), reduced burn speed to slow, there are no video filters listed. Using verbatim dvd-r. Gateway multimedia fx530 2 yrs old. Raid 5. Lot's of disc space. It's a multimedia machine. 2 gb memory. 6 minute movie. I've scrapped several discs while changing speed and checking settings. This error msg appears at the last 1% of the process (progress bar).

Posted On: 2010-03-07 . View Related Posts . . View 3 Replies .

Dvd Maker Aspect Ratio Problem

I am using the windows 7 dvd maker tool, and am experiencing some major issues. I have a widescreen formatted avi file i am trying to burn onto a dvd. When i import the video, it doesn't matter which aspect ratio i choose the finished dvd is the same. Menu shows video correctly, but the movie part is squeezed into a 4:3 with black bars on all four sides.

It seems to be that windows dvd maker does not recognize the aspect ratio of the avi file imported. Although the avi file loads in media player in the widescreen format, the file listing in dvd maker clearly shows in 4:3 aspect ratios for the same file, imay sure that windows 7 dvd maker is set up correctly on (16:9).

I have wasted several dvds attempting to use multiple configurations within dvd maker and none have been successful. The dvd always burns in 4:3 aspect ration regardless of the settings chosen under the options menu. This is definitely a bug in the program.


Posted On: 2010-03-04 . View Related Posts . . View 6 Replies .

Unknown Dvd Maker Error Message

Here is a frustrating problem i am having with windows dvd maker that no one can seem to explain. I have a new computer, less than a month old, running windows 7. I have been trying to burn some home movie clips on to dvds for various friends and family. I completed 3 or 4 dvds successfully. All of a sudden, during the burning process, i get to a point about 0. 3 to 0. 4 percent encoded when i get an error message that the dvd cannot be made due to an unspecified error.

Every fresh, new, out of the package disk i try to use ends up with the same message. The clips haven't changed, the filters haven't changed, the settings haven't changed, i've just done a few successfully with no problem, now all of a sudden it can't burn any more discs. What happened? What do i need to do to fix it?


Posted On: 2010-02-09 . View Related Posts . . View 2 Replies .

Jewelcase Maker In Nti Media Maker 8

I am having trouble with the jewelcase maker program in nti media maker 8. It tells me there is a problem and has to close; that it will notify me if a solution can be found. I insert a picture on the front of the cd cover just fine. I was only able to add the text for a few titles and guess what? Yep "there was a problem and it had to close" now i can't save additional text to the cover. It lets me type a few lines - maybe- but then when i go to save it tells me blah blah and then shuts down.

Also when i made a test print of what i did manage to save, i got one print and 5 blank pages. I chose to print only 1 copy and that's what the print window said before i hit print. Once it started to print the printer said 6 copies- with one being printed and 5 blank i'm running windows 7home premium on an acer aspire notebook that is less than 2 months old and this is the only problem i have. Can anyone help me with this please?


Posted On: 2010-05-01 . View Related Posts . . View 2 Replies .

Easy Transfer Report

I recently bought a new pc with windows 7 already installed. I performed a windows easy transfer of most of my stuff from my old xp to the windows 7 pc with no fuss, except when it was installing/saving the transferred data, it asked me for my old pc's password. I didn't know it, didn't even know it had one and neither did my husband. We tried all the obvious ones, then just gave up and closed that window down. And the rest of the installation/saving continued. Now when i go to view the report of what was transferred, i am unable to open it as it keeps saying that an error has occurred, and do i want to continue running scripts.

Then a pop up box appears with the following message. "Windows easy transfer post migration application has stopped working". It then searches for a solution, then says "it has a problem that caused the program to stop working correctly. Windows will close the program and notify if a solution becomes available". Then the report closes down and i cant view it at all. What can i do?


Posted On: 2010-06-16 . View Related Posts . . View 2 Replies .

Cannot Run Compatibility Report

Cannot run windows compatibility report. When attempt to open receive the following: "the following issues are preventing windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue". The task listed is "windows needs to be restarted so necessary changes to system files can be made before continuing". Fter restarting windows and attempt to open windows compatibility, etc. I get the same messages described above. Anyone have any help ideas?

Posted On: 2010-06-15 . View Related Posts . . View 2 Replies .

System Diagnostics Report

I just built my new computer and installed windows 7 and have had the same problem with unexpected shutdowns. I generated a system health report and got these 2 failures:

Motherboard device status fail count
24
1
Motherboard devices.

Plugandplay device configured fail count
181
1
Plugandplay devices.

And clue what could be wrong with the motherboard? I got an asus p6x58d premium motherboards and as far as i can tell everything is installed correctly and there is no damage to the board.


Posted On: 2010-03-02 . View Related Posts . . View 2 Replies .

Upgrade Advisor Report On Devices

If the report says that "we don't have compatibility information about this device. " Does that mean it cannot support the device? How would i know if it can be supported? I tried using the microsoft online search for compatible devices but did not see the device i am using.

If the report says that "check windows update after installing windows 7 to make sure you have the latest driver for this device, otherwise it may not work. " Does that mean it may not support the device?


Posted On: 2010-01-09 . View Related Posts . . View 3 Replies .

Cannot Use Crystal Ocx To Print Report

Software that we have and support that has run for more than 10 years no longer works on windows 7. Well, most of it works, except one small part that transfers control to an ocx to print a crystal report. I'm trying to figure out why it wouldn't work. It just hangs with the swirling blue wheel. Does anyone know what changed with ocxs in windows 7 that might make this not work? I've tried using the compatibility mode options and administrator access to no avail. Any thoughts? I'm looking for a backward compatibility type workaround.

Posted On: 2010-04-21 . View Related Posts . . View 4 Replies .

Win 7 Install Hangs At Blank Compatibility Report

Windows 7 install hangs at blank 'compatibility report' i have run compatibility advisor and only need new printer driver. I waited about 30 minutes and nothing happens. Install starts, installs temp files, setup is started, i go online to get updates, accept license, choose upgrade install, checks compatibility.compatibility report is blank and the copy on the desktop goes to blank page online.

The taskbar showing 'collecting information' goes almost halfway and then just stops. Nothing happens. I am installing 32 bit windows 7 home premium as upgrade to vista home premium.compatibility check is blank after running and if i hit 'close' it just goes back to the 'install windows' page. How can i get windows 7 to install?


Posted On: 2009-11-04 . View Related Posts . . View 9 Replies .

Taskbar Bug

Found a small bug in the highlighting of applications on the taskbar. Tested with windows explorer, haven't tested any others. Always reproducible on my machine.

Open two windows. Show the previews by mousing over the icon. Mouse over one of the windows, and hover over the close button. Once the window comes to the front, close it using the close button on the preview, then move your mouse off the preview so that the preview will close soon. The highlight stays on the icon no matter where you move the mouse, until you focus another window or mouse over a taskbar icon again.


Posted On: 2009-06-01 . View Related Posts . . View 3 Replies .

Microphone Bug

I have a problem about mic. I use windows 7(32-bit), and have latest sound driver. The problem is, i plug it in at proper "jack" ( the pink one ). I un-mute it and put the volume on max. I can hear on my headset when im poking the mic but when i try to record, or to speak with someone over skype / msn, the green line is not rising up, and people are complaining to me that they can't hear me. I've been searching forums about this. I am sure that its not cause of driver, or non-working mic. Some even wrote that it could be a bug at windows 7, or driver http://social. Answers.microsoft.com/forums/en-us/gettingreadyforwindows7/thread/562f2350-44d2-4495-981d-c416d0337bd7

I have one desktop mic, and headset mic, same problem at both. Oh, and by the way, i never had this kind of problem on windows xp.


Posted On: 2010-02-04 . View Related Posts . . View 2 Replies .

Outlook 2007 Bug

After a clean windows  7 install, outlook 2007 places a space before each apostrophe on all outgoing email. I have found that use of ctrl + z fixes it, but we shouldn't have to use it each time. It is annoying. A fix at the source of the bug is necessary. My research finds this is a common new issue among w7/office users.

I have been using w7 since it's rc and hosted a w7 party last month - so i am not a newbie. This is not a formatting issue, rather a bug in the code somewhere. Let's get it fixed microsoft. Everything else works great!


Posted On: 2009-11-13 . View Related Posts . . View 3 Replies .

Install Update Bug

I've install windows 7 and like it's excitement, i install the update, but i found that the problem is in the networking. Suddenly i cannot connect to the internet using my broadband connection, the troubleshooting is i have to disable my lan, and try to repair the trouble, and it can connect again to the net. But, if i don't install the update, it can connect anytime without doing the "ritual", i've try to restore the system earlier before the update. Any suggestion or the update is really a bug?

Posted On: 2009-06-21 . View Related Posts . . View 2 Replies .

Opening Folders Bug

I notice this: you double click on a folder in explorer and it opens to reveal other folders, no problem. Now have you noticed that when you keep clicking on folders that the clicked folder which is showing in the open dialog window jumps all the way to the bottom so that now you have to first scroll that selected folder all the way up just to see the sub folders contained inside of it.
 
This is very very annoying. I don't want that every time i click on a sub folder it goes all the
Way down to the bottom of the open dialog box, it should stay where it is, but no, instead it
Falls all the way down to the bottom and each time i open a sub folder i have keep scrolling the
Sub folder list up, this is a pain in the buttocks and i consider it to be a bug.


Posted On: 2010-04-25 . View Related Posts . . View 3 Replies .

Hard Drive Rename Bug

I am having problem with renaming the hard drive. Disk management shows names for each partition but when i open my computer only c drive has specific name the rest of the partitions are named local drive and if i try to change it by right click rename or properties and change volume name, after clicking ok nothing happens but funny thing i go to the disk manager and there i can see the change in the partition name but explorer keeps displaying local disk, drives me crazy. I am running windows 7 pro. Someone please provide solution.

Posted On: 2010-08-12 . View Related Posts . . View 2 Replies .