Advertisements:




Samsung Ml-1430 Printer Driver Software Wont Install


Samsung ml-1430 printer driver win7x64 software won't install; can't find working driver-same with samsung dvd r/w. I quite vista (32 bit) when i had an infinity of problems getting hardware and software to work (goodbye to all that $$$), now i've tried win7x64 bit and i have worse problems!  I'm getting tired of this. I may junk it all and just install xp (again) after another ms or samsung failure to make sure hardware and sw works.

I can't figure out how to make the compatibility mode work and so much more won't work. I have a 3 ghz core 2 duo e8500, 4 gigs of memory, sata ii 500 gb hard drives, decent 8800 gt's video, so it's not a slow system. I just don't get it. If i could run rfactor on a mac i would get one just to avoid the last 3 years of headaches.


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Samsung Ml-2150 Printer Driver Problem

Win7-64 won't install samsung ml-2150 series 64-bit printer driver to that printer on ethernet; keeps trying to install on usb.

1. New win7-64bit installation.
2. Samsung ml-2151n printer ; correct 64bit ml-2150 downloaded from samsung.com
3. Printer connected to the win7 cpu via usb: driver installs and printer works fine
4. Printer's nic on the ethernet lan (which always worked on winxp32bit) is found by browser on the win7 computer and will print a test page or otherwise control the printer as would be normal.
5. However, win 7 doesn't show the network printer in the printers/devices window
6. Add printer doesn't work; reverts to the driver that operates only via usb (grayed out when the usb cable is unplugged, which is how i'm trying to set things up).
7. Add port adds the tcp/ip port name of the printer in hex, as shown in the printer's test page printout.
8. Add printer still doesn't work.
9. Samsung won't support me since the printer is out of warranty (duh, it works fine for past 6 years, it's their stupid driver, or what?). They consider installing an old printer on a new os using their newly published driver to be a warranty issue that they won't support. Huh?
10.network is "trusted". Subnet is the same. No difference if win7 is running as homegroup or workgroup. Norton internet security is installed and doesn't give error message; see #4, above.

My question: how do i install and run this beast as a network printer so i can move it out of my office?


Posted On: 2010-03-02 . View Related Posts . . View 4 Replies .

Lexmark X2350 Printer Software Driver

I have a new asus with windows 7 and i have my lexmark x2350 printer for which i no longer have the software to install the driver. Lexmark doesn't show windows 7. How do i get my printer to work now? I need to know how to get a driver installed on windows 7 to operate my older model lexmark x2350 printer?

Posted On: 2010-01-22 . View Related Posts . . View 2 Replies .

Upgrade Issue With Dvd-ram Driver Software/bd Driver Software

Unable to find the following: dvd-ram driver software/bd driver software. The following issues are preventing windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue.

For these items, make the following changes:

Uninstall these programs. Open control panel and search for "uninstall a program".

Dvd-ram driver software/bd driver software.


Posted On: 2010-01-18 . View Related Posts . . View 2 Replies .

Samsung Ml-1710 Printer With 64-bit

I just received a new computer with windows 7 64-bit. I installed my samsung ml-1710 laser printer using the "windows 7" driver on the samsung website, as recommended by microsoft. After doing so, i was able to print the test page, and all networked windows xp machines print with no problems.

The problem is that my windows 7 machine, to which the printer is connected via usb, will print the first time, but i have to cycle the ac on the printer to print additional documents. Anything after the first document just sits in the print queue for a few minutes and then disappears.

I'm relatively sure this is a samsung driver problem. Has anyone encountered or worked around this?


Posted On: 2010-02-14 . View Related Posts . . View 9 Replies .

Samsung Omnia I900 Drivers Fails To Install

I've been trying to setup my samsung omnia (i900) on windows 7 ultimate x86 rtm but the driver keeps failing to install. The phone used to work on both the beta and rc releases of windows 7 however it's not working with rtm which is odd. I've tried googling this endlessly but i've yet to find a solution that works.

Posted On: 2009-10-26 . View Related Posts . . View 3 Replies .

Samsung Ml-1610 Driver For Win7

I just buy an lase printer samsung ml-1610, i try to install drivers for printer, vista, xp, win 98, 2000, all range, no one is working with windows 7, my printer does not work. Where i can find a driver for this printer? On the website of samsung i did not find any driver to work it out with  windows 7. I also setup to run compatibility option to be compatible with all operating system from windows and no one want to work it, in administrator mode too, no result.

I try the printer on xp, vista and win 98 and is work but not under windows 7. What can i do? I don't want to use xp, vista, i want to use the printer on windows 7 and i must find an driver to work with windows 7. Does exist any setup to make it work on windows 7 the printer samsung ml-1610?
The picture of the erro (print screen) you can see at: http://www.Flickr.com/photos/33493691@n02/?Saved=1 please don't send me at samsung drivers webpage, they don't have an solution for this issue!


Posted On: 2009-10-01 . View Related Posts . . View 5 Replies .

Samsung External Dvd Se-s084c Driver Issue

Samsung external dvd se-s084c worked fine with my win 7 machine (acer timeline as3810t) for a month or so. Then suddenly system stopped recognizing it. Troubleshoot found that driver service is disabled. I was unable to enable it, even if i went through disable-enable and remove-install routines as suggested on microsoft site. Recommended action was to update the driver. However, when i run update driver service, win troubleshooter claims that driver is up to date and no action is needed. Anyone has idea what to do and how to enable the driver on my machine?I suspect that driver stooped functioning after one of win 7 regular on-line updates, but i cannot tell which one. Se-s084c works without problem with my old laptop running win xp.

Posted On: 2010-08-21 . View Related Posts . . View 2 Replies .

Cannot Install Canon Ip6700d Printer Driver

I have windows 7 64 bit set up with a canon ip6700d printer. I set up the printer to be shared on the network with another pc running windows xp 32 bit. When setting up the sharing options>additional drivers, i point to the x86 file: ip6700d. Inf located on the printer install disc. When i attempt to install the driver i get the message: "the specified location does not contain the driver canon inkjet ip6700d for the requested architecture" i have verified that it is the correct inf file by opening it. The following is the header info:

; Ip6700d. Inf (for windows x86 monolithic driver)
;
; List of supported printers, manufacturers
;
[Version]
Signature="$windows nt$"
Provider=%canon%
Classguid={4d36e979-e325-11ce-bfc1-08002be10318}
Class=printer
Catalogfile=ip6700d. Cat

Attempting to install the driver on the xp machine fails as well with the same file, when i try to add it as a network printer. Is there something i am missing?


Posted On: 2009-11-05 . View Related Posts . . View 14 Replies .

Usb Printer Driver Doesn't Install

Printer is a canon i965. Canon say it uses the windows 7 usb printer driver but when i plug it in it recognizes the printer is there but displays "device driver software was not successfully installed". Looking in control panel>hardware&sound>devices&printers there is a picture of a printer with a triangle and exclamation mark in it. Iv'e tried deleting it and installing in a different usb port. Still the same.computer is a toshiba satellite laptop running windows 7 in 32-bit mode.

Posted On: 2010-05-26 . View Related Posts . . View 7 Replies .

Cannot Install Printer Driver - "access Is Denied"

I'm trying to install the driver for an hp laserjet 5l on a new windows 7 system. This is a completely new system, delivered four days ago. First step was to plug in a usb to parallel port converter. The device is recognized and shows up in device manager as "usb printing support". So that part works. Then i try "add printer".

I select "use an existing port" and "usb001 (virtual printer port for usb)" device as the port. And look for a hp laserjet 5l driver. There 's no matching driver in the standard list, so i click on "windows update". After a few minutes, a longer list appears, with a "hp laserjet 5l" option. I select that, the message "this driver is digitally signed" appears, and i click "next". I leave "printer name" as the default "hp laserjet 5l", and click "next". Uac then prompts me for the administrator password, which i give.

A progress bar moves for a few seconds, and then i get an alert: "printer driver was not installed. Access is denied". So that's a failed driver install on a signed driver obtained directly from windows update. This is repeatable. It occurs when run from a nonprivileged user account. It occurs when running with the default "user" administrator account. It occurs even when i temporarily enable the hidden "administrator" account and run as that.

Looking at various knowledge base and support articles, there are various suggestions. Similar problems have been reported as far back as 2003. A similar problem was reported with the windows 7 release candidate, and the user was advised to wait for the released commercial version.

There are various suggestions involving adjusting uac permissions, most of which require a tool that doesn't ship with windows 7 home premium. One posting remarked that this failure will occur if the driver file is marked as read only, but presumably windows update wouldn't do that. Everything else on the system is working fine. No crashes. Please advise. Os: windows 7 home premium, 64-bit.

Activated: yes.
Windows update: enabled, and current.
Cpu: amd athlon ii x2
Motherboard: asus m4a785t-m
Assembled by: central computer, sunnyvale, ca.


Posted On: 2010-06-12 . View Related Posts . . View 3 Replies .

Cannot Use Administrator Rights To Install Software

I upgraded to windows 7 from vista 64. I had the following issue in vista. One of the dlls (16 bit?) Would not load and every time i restarted the laptop (sony vaio), it would not load and gave me a reminder. I have the same issue with windows 7 and the following. I can not load any software, getting the message that i do not have access to keys (in the case of itunes). It will not accept windows updates. I have a freeagent drive and it will not allow it to back up in any form. I attempted to do a 'burn down' installation of windows 7, to clean out any prior programs or data and it will not let me initiate any action from the windows 7 disk at all.

Posted On: 2010-04-23 . View Related Posts . . View 2 Replies .

Error Message When Try To Install New Software

I recently bought a dell laptop that has turned out to be a huge mess. When i first got it i immediately had to reinstall windows  7. I have had to reinstall it twice. Now the computer will not allow me to turn on the firewalls, i get an error message and anytime i try to install new software it will not let me. I can't even download any new virus software or upload from a disc.

Dell wants to charge me a boat load of money just to try and fix it. The computer is still under warranty but they will not cover what they consider to be software issues. I will wind up paying half of what it cost me just to fix a problem that clearly happened at the factor. Are there any suggestions for this problem?


Posted On: 2010-03-17 . View Related Posts . . View 2 Replies .

Cannot Load Printer Software

Few days back i have purchased note book with preloaded win-7. I have a hp photosmart printer model 3108 for my personal photography hobby. Software of this printer is not getting loaded in win-7 i.e. Win-7 is not compatible to printer cd. In other os like 98, me, xp there is such problem. Than why in win-7. I have taken up this issue with hp but issue is un-resolved. I hope u will resolve the issue & provide me suitable solution which enables me to load printer software.

Posted On: 2010-07-14 . View Related Posts . . View 2 Replies .

Win 7 64-bit Software Raid After Install

Already have windows 7 (and tons of other programs) installed. I am currently considering to add another hard-disk and activate raid 0. The only thing, that holds me back currently is: i don't want to go through an entire new installation. During the fist installation (upgrade from vista), i installed also ahci.

A) is there any chance to activate a software raid without having to go through an entire new installation?

B) would it be alternatively possible to create and save an image of the current installation and then write it back to striped drives?


Posted On: 2010-03-09 . View Related Posts . . View 4 Replies .

Canon Wireless Software Install Error

I get an error dialog display saying "mp drivers-new port could not be created. :0000" when i try to install my wireless canon pixma mp640 installation sw onto my new lenovo ideapad y560 notebook computer. The lenovo's os is windows 7 home premium. I did not have this problem when i installed this same software onto my powerspec (micro center) windows 7 professional system desktop. Both computers share the same wireless network and both access the internet successfully. I tried the microsoft method and everything worked. Thanks for the procedure on how to install the wireless canon printer via the add printer windows 7 feature. The windows 7 professional version did all the leg work when the canon installation disk was used.

Posted On: 2010-05-25 . View Related Posts . . View 5 Replies .

Driver Software Installation

I have a problem with windows driver installation. My notebook has a bluetooth and is already installed with proper driver. Every time i boot the machine the "driver software installation" starts and finalize with saying that device driver was not successfully installed. Furthermore the detail describe this is caused by bluetooth peripheral device. Actually i tried to connect my bluetooth phone before but did not succeed. Every time i reboot the same thing happens.

Now, i have disabled windows update, i have disabled the devices and also tried the device installation settings in the control panel etc. But nothing stops this "driver software installation" from starting at the next boot. Is there any way to disable the "driver software installation" from automatically running again and again?


Posted On: 2010-01-04 . View Related Posts . . View 2 Replies .

Hp C4480 Printer Software Problem

I am trying to connect my new hpc4480 printer to my toshiba laptop and it says i do not have the latest software. My laptop is one week old with windows 7 on it. I have been to the hp website and downloaded the drivers and am still having problems. Windows 7 and hp c4480 printer compatibility problems.

Posted On: 2009-12-26 . View Related Posts . . View 2 Replies .

Cannot Find Support From Hp About Printer Software

My printer is unsupported in windows 7 by hp  its really software print package called photosmart premier  i was using as used it to print on printable cds printer photosmart d5160. I was thinking of partitioning hard drive which running windows 7 64 bit. And putting xp on new partition so i can run software as before. Question can  i do this , if so how  i did have duel boot system before but i think i had to put xp on first and then new partition windows 7 when in its beta stage i don't want
Uninstall windows 7 and go through this process again .


Posted On: 2010-04-22 . View Related Posts . . View 6 Replies .

Driver Software Was Not Successfully Installed

Device driver software was not successfully installed after installed external hard drive. I installed a western digital external hard drive recently with no problems, initially. I now receive the error message "device driver software was not successfully installed" and can get no updates from windows 7 nor do i see any drivers that are necessary for this product, but still receive the error message (yellow in triangle) "my passport 070 needs troubleshooting".

Posted On: 2010-02-03 . View Related Posts . . View 2 Replies .

Driver Software Not Successfully Installed

I have tried on numerous occasions to install a gps-pc usb interface driver supplied by memory maps in order to interface my garmin etrex h unit to download waypoints from pc to unit and vice versa
When i have done so and then plugged in my gps unit i get this error message 'driver software not successfully installed ' i then click on the troubleshoot option as instructed to do so and i get a link to download a driver software from the web name of prolific. This also fails to install successfully. In desperation i went to memory maps website and downloaded a more up to date version. This installed successfully but when i went to my digital maps programme it found my gps unit okay and then began to upload a route info from my gps unit. S it was doing so my computer crashed and a big blue screen appeared advising me of this fact and then the computer shut down
Have uploaded google chrome unistalled the driver software done a systems restore to an earlier point in time and then tried again.


Posted On: 2010-03-24 . View Related Posts . . View 2 Replies .

Install Software On Netbook Using Laptop's Dvd Drive

I have a laptop running windows 7 and a netbook running xp (which has no cd / dvd drive). How do i connect the two so i can install software using my laptops dvd drive. Can i use just a network cable?I am not so clued up on networks so the easiest / cheapest method would be a great help.

Posted On: 2009-11-18 . View Related Posts . . View 2 Replies .

Dell 3000cn Printer Software Not Installing

Can anyone help with my problem of installing my dell 3000cn printer software, all that happens is display window comes up and when trying to install all that happens is the same install window comes up. I've downloaded drivers from dell but this makes noe difference. Windows 7 doesn't seem to have any help relating to this topic and i have been trying for about two weeks to load software.

Posted On: 2010-04-01 . View Related Posts . . View 2 Replies .

Uninstall Printer Software And Drivers / Program

How do i completely uninstall printer software and drivers if control panel uninstall a program utility results in error message? I have a brother mfc-9440cn multi-function printer/fax/scanner.

When i bought my new 64-bit windows pc, brother didn't have any windows 7 drivers, so i used the original (windows xp) software to get the device up and running. It did work perfectly - i could print but not scan. Plus i wasn't able to set it up as a shared printer so other family members on our home network could print to this device.

Now that brother has 64-bit windows 7 compatible software and drivers available, i'm having trouble installing it. When i try to install it, i get the message that "mfl-pro suite is already installed. Do you want to uninstall and then proceed with installation?" I click yes and then within the brother mfl-pro suite installshield wizard i get the message "an error occured during the installation. Please restart your pc, ensure all active applications are closed - then reinstall "mfl-pro suite. "

I have already tried the control panel uninstall a program utility and end up with exactly the same error message.

I have downloaded an uninstall utility from brother and end up with exactly the same error message.

I tried looking under regedit, hkey_local_machine > software > microsoft > windows > currentversion > uninstall for any stray registry entries relating to brother. There aren't any!

I need to find a way to completely remove the now non-functioning mfl-pro suite software and brother drivers so that i can install the new windows 7 compatible version. Can anyone help with this?


Posted On: 2009-12-09 . View Related Posts . . View 10 Replies .

Lexmark X5495 Printer Installation Software

I need to connect a printer that operated on windows xp that is now connected to windows 7. After tunning the installation disc i get error messages. The lexmark guide does not list windows 7 for model x5495. Where can i get installation software?

Posted On: 2010-05-11 . View Related Posts . . View 2 Replies .

Printer Hp All In One L7680 Reload Software Issue

Printer was working just fine, then one day, computer wanted to reload software as some drivers were no longer on my system. I am now. Have tried uninstalling, re-installing. Hours on the phone with vista support, hp support, and still at the same place.gain, working on a hp laptop with vista, 32 bit. Hp all in one l7680. I am getting the run around, and hours on the phone and still no luck.

Posted On: 2010-08-10 . View Related Posts . . View 2 Replies .

Radeon X1550 Driver Software Not Working

Installed 7 rc 1, round about 26 hours ago. Thought i might check it out, see if my drivers for my motherboard, video card etc. So i start with my video card; normal installation process except until i get my monitor saying to me "out of range" which i find strange seeing its configured to the optimal resolution for my monitor (1440x900) by default. I've done what i can from my knowledge. But seeing as windows 7 is a new frontier. I might get some actual advice.

In short is it the software conflicting with the operating system, with the hardware etc etc, or something else. Any ideas?


Posted On: 2009-06-04 . View Related Posts . . View 2 Replies .

Device Driver Software Was Not Successfully Installed

This error message comes up to me every time i try to attach an external hardware. I was fine with everything with vista, but ever since i upgraded to windows 7 professional, whether i try to connect a blackberry or an external hard drive, that error message pops up. What can i do to fix it?

Posted On: 2009-12-08 . View Related Posts . . View 2 Replies .

Upgrade Blocked - Remove Dell Printer Software

In installing the windows 7 upgrade to windows xp on my laptop, i am blocked by an instruction to "remove dell printer software". Ias far as i can tell, there is no dell printer software on my laptop. What do i do?

Posted On: 2009-11-12 . View Related Posts . . View 2 Replies .

Hp Officejet 7410 Printer Software Updating Error

Phone numbers ideas:programs you are having problems with error messages recent changes you made to your computer what you have already tried to fix the problem

Posted On: 2010-08-08 . View Related Posts . . View 4 Replies .