Advertisements:




Win7 Will Not Recognize Any Of Usb Devices


The lovely windows 7 operating system. Will not recognize any of the usb devices, ie mouse, keyboard, etc, i cannot download drivers for them because. You guessed it, cannot use keyboard or mouse to type, any suggestions? Why aren't usb devices recognized with windows 7?

View Full Post With 9 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Computer Cannot Recognize Usb Storage Devices

I am using a brand new hp with windows 7. The first time i plug any thumb drive or my external hard drive into any usb port my computer immediately recognizes it by name and i able to use files on it and save to it normally. When i safely remove it and come back the second time and plug it into my computer nothing happens. I go to my computer and see it is shown as "unknown device". When i use the "trouble shoot hardware devices" tells me it is not recognized and i get this message:

Windows has stopped this device because it has reported problems. (Code 43)

 I have tried turning the computer off and rebooting but i still get the same message. I have used the update driver and get the message that the proper driver is installed. I have gone to the "windows 7 compatability center" and my simpletech 160 gb external hard drive is listed as compatible. Please tell me what i can do to make my computer recognize and allow me to use these devices. Without being able to use them so that i can do work at home and take it back and forth to school, i really have no need for the computer in the first place !

I am able to use all my external usb storage devices on xp at school as well as on an old laptop at home with no problem. The only problem i have is windows 7 apparently. Since i have tried three different usb plug n' play devices with the same result (each of which was recognized only the first time i plugged them in) it obviously is not the fault of the storage devices.

Is anyone out there?


Posted On: 2010-01-03 . View Related Posts . . View 4 Replies .

Win 7 Once Connected To Nas Drive Wont Recognize Upnp Devices

I have a laptop running windows 7 that once connected to a nas drive wont recognize upnp devices, is very slow to uninstall programmes, will not shutdown, and generally grinds to a halt. I have a western digital nas drive, an hp hdx18 laptop and a htpc connected together through a bt ethernet router. Every time i connect the laptop to the nas drive it starts to behave strangely.

1. It will not recognize any new upnp devices that i plug in such as external hard drives 
2. The printer stops working - all print jobs are queued until after a reboot
3. Software uninstall can take a very long time
4. The machine will not shut down. It hangs on the windows shutdown screen with the blue circle spinning.
5. The machine seems to become unstable and slowly grinds to a halt.

The trouble started happening when i installed the wd software. However, i cannot be sure it was this that caused the issue as i was changing other software at the time. At the time i was running vista 64 home premium. I have subsequently upgraded to windows 7 x64 hoping that would fix it - no joy.

Further clues are that i have recently bought a htpc and installed windows 7 and the wd software. This works fine and does not show the same symptoms. I do suspect that the registry of the laptop may have some corruption (at least that is what free registry check software says - i have not bought any software to fix the issues). Do you have any idea what is wrong?


Posted On: 2009-10-10 . View Related Posts . . View 2 Replies .

Usb Connected Printer Causes Other Usb Devices To Fail

Operating system - windows 7 professionalprinter - canon multifunction mp530the printer is listed as windows 7 compatible and i have installed the latest drivers on the canon site. The printer installed correctly and all its functions work correctly. When i connect the printer to my machine and power it on the other 7 usb ports fail to operate correctly.

I cannot read a flash drive and my usb connected card reader does not function. If the pc is loaded with the printer switched off then all the other usb ports function correctly while the printer is switched off. If i then switch the printer on i can print ok but cannot use any of the other usb devices until i restart with the printer switched off. In device manager the printer is shown as working ok but the card reader is shown as "device cannot start".

Driver details usb host controller - provider = intel, date = 13/09/2006, version = 8. 2. 0. 1008driver details usb hub - provider = microsoft, date = 21/06/2006, version = 6. 1. 7600. 16385any ideas?


Posted On: 2010-06-02 . View Related Posts . . View 4 Replies .

Win 7 Does Not Recognize Usb Drive & Ipod

This has been really bothering me. Windows 7 works perfectly with my old programs after my upgrade. Only when i plug in my usb external drive and ipod touch, ipod video. It does not recognize it. I tried device manager and looking for it there, it does not show up. When i go on safe mode, "usb mass storage" shows up but i cannot update cuz it keeps saying it already has the best driver installed. When i look at "properties" it says there is no driver installed.

With my ipods, i tried stopping and restarting ipod service, apple mobile device, itunes. I tried reinstalling a newly downloaded copy of itunes at least 4 times. That does not work.

There is a registry fix for this on windows xp titled "windows xp cannot detect a usb flash drive, an apple ipod, or an external hard disk drive" but does not have one for windows 7. The xp fix even has a download fix for fixing the registry. Is there one also for windows 7. I am going through the trouble of installing virtual pc and xp mode just to use my devices.


Posted On: 2010-01-27 . View Related Posts . . View 5 Replies .

Win 7 Does Not Recognize Belkin Usb Adapter

I performed a registry cleanup on my computer last monday using norton 360 with mixed results. The major problem i'm having is that i can't seem to connect to my belkin wireless usb adapter anymore.
I did a system restore, and an uninstall/re-install of the latest belkin driver software. The adapter does manage to connect on occasion, but returns to its inoperable state if i put the computer to sleep or try to do a reboot.

If i try a clean install, w7 typically tries to connect to the adapter but then it either says that the device isn't recognized or says there is no device at all. When i run a diagnostic, w7 recognizes the problem but it figures that i'm trying to connect through my ethernet cable and not via usb. I can't seem to make it point to the usb connection. Am i missing anything? Is there a manual fix? 


Posted On: 2010-05-03 . View Related Posts . . View 5 Replies .

Win 7 Recognize Usb Gps As A Serial Mouse

Windows 7 + usb gps becomes serial mouse = bad news*i know this has been asked quite a few times on here, and a solution has yet to appear, but since it has been awhile since the last time it was posted i thought i would see if any progress has been made. Problem: plugging in a usb gps, or a serial gps connected via a serial->usb adapter causes windows 7 to improperly recognize the device as a serial mouse, and since the data stream is rapid, the mouse pointer begins to jump all over the screen.

In xp, disconnecting the gps temporarily left behind the serial mouse in device manager, and disabling it there would then allow the system to be used again. Unfortunately, in win 7 when the gps is unplugged the system immediately removes the device from device manager. Additionally, the tools microsoft had released to combat this problem on the front end have not been released for windows 7. So we have the choice, continue to hold the laptop rollout, or revert to rolling them out with xp. Neither option is ideal. Anyone have any ideas?


Posted On: 2010-07-01 . View Related Posts . . View 2 Replies .

Usb / Firewire Combo Card Does Not Recognize External Hd

I recently installed a new usb/firewire combo pci card on a i7-920 win7 professional based computer. The usb part works fine but the firewire does not recognize external hds. However external hds were connected to the firewire port on the motherboard, it worked fine. Changed firewire driver to legacy driver that came with win7 pro did not solve the problem. Moving the card to a different pci slot does not solve the problem.

Now under the device manager, the driver is "working properly" but the card just won't recognize the external devices. Is this a driver problem (i.e. Need a newer or win7 pro specific driver)?  If it is, where to get it?  Have searched internet and numerous websites (including card manufactuer) but cannot find an answer. Is this card defective?


Posted On: 2010-01-20 . View Related Posts . . View 2 Replies .

Win 7 Wont Recognize Usb Hp Deskjet F2280 Printer

Just today purchased a brand new sony vio laptop. Have a hp deskjet f2280 printer - which i have downloaded the drivers off the hp website (as the disk did not support windows 7) however i keep getting a message that that the 'usb device is not recognized' i have reloaded the software, run checks on the system but still nothing (the software is installed and recognized including showing print logs ques etc). The printer was working on an older computer.

Do i just need to buy a new usb printer cable or is there a cheaper solution to an already expensive day!?


Posted On: 2010-04-08 . View Related Posts . . View 4 Replies .

Usb Devices Problems

Every time i plug a usb device into my computer, windows media 11 reports a fault and shuts down. I can't reinstal it, because it's no longer separate from the operating system. This started on vista, so i upgraded to windows 7 but it's still the same. What worries me is that i can't use my mp3 players and diabetes meter on any computer now - they are recognized, but i can't download anything onto them or even close them safely because i'm always told that they are busy with another task (they're not, at least as far as i know). Has the windows problem corrupted the software in any usb device i've attached to the computer since it first happened?

Posted On: 2010-01-23 . View Related Posts . . View 2 Replies .

Usb Devices Are Not Detected

I've been reading a lot of posts in this community and in similar ones and i tried all sorts of things suggested there with the hope that my problem gets solved. Unfortunately it hasn't happened so far, but at least i know i'm not the only one frustrated. I have a toshiba satellite l30-10t laptop, running windows 7 home premium, clean install after vista home basic oem.

After installing 7, my usb devices (wd 320 gb external hard drive, usb hub, mp3 player, flash drives, mobiles phones, digital camera) worked fine for a few days, then all of a sudden were not recognized anymore. I don't get any error message, the devices are powered (lights on, disc spinning), but drivers fail to load. I've already tried the following (the list is randomly ordered) with little or no succes at all:

- Reinstalling the os
- Updated bios
- Trying to update the usb drivers
- Uninstalling the usb controllers/reboot and let windows find them again, both in normal and safe mode.
- Shut down, unplug from main power supply (with the battery taken out as well), left it overnight and then boot again
- Erased all the installed usb devices in device manager using the "show hidden devices" feature
- Deactivated the usb selective suspension in the power scheme settings and the "allow computer to shut down device to save energy" (my windows is in italian, i'm sorry if not getting the right names in english) in the usb hub's settings - solved the issue for a few days.
- Deleted the upper and lower filters in the registry as suggested in one post - this only caused a blue screen each time i tried to reboot.
- Installed the latest driver for the ati chipset (or at least i think this is what i did)
- Used this tool http://www.Zhangduo.com/udi.html to find any unknown devices, it found a couple, usb controller and usb hub, but i couldn't get any drivers.

I've seen a solution that seemed to work for some, though it was for xp, change the disableselectivesuspend value in the registry, but i couldn't figure out exactly how since my registers look a bit different than described in the post.


Posted On: 2010-04-04 . View Related Posts . . View 5 Replies .

Conflict Between Usb Devices

I have windows 7 ultimate x64.couple days ago i bought apc smart ups 500va that has a usb connection to the pc to enable a soft shut down. I have installed the latest win 7 drivers from apc. I also have microsoft wireless multimedia keyboard 1. 1 and microsoft wireless optical mouse 2000. Once i installed the ups (it's using one of the usb ports), every time i reboot, the keyboard and mouse freeze and i can't fix that until i plug the ups out of the usb and reboot. Once i am in windows, i can plug the ups back in and it works perfectly. Re-installing drivers, removing devices and other usual tricks have not hepled. How can i get around this problem without replacing the hardware? 

Posted On: 2009-12-09 . View Related Posts . . View 4 Replies .

Norton 360 Can't Recognize External Usb Hard Drive

Norton 360 can't recognize external usb hard drive on windows 7. Drive works fine on vista
Windows recognizes the usb drive but norton 360 does not. I have tried 2 different external drives and neither one works on windows 7. Both work on windows vista machine.


Posted On: 2010-02-11 . View Related Posts . . View 3 Replies .

Usb Devices Not Registering In Win 7

Usb devices not registering in win 7 os except when laptop is restarted with usb device attached - no error messages displayed? I have tried everything i can think off this is my last resort! I am running win 7 home on a dell latitude d430 for which i have a separate media slice/docking station (which comes with its own usb ports/dvd drive/dvi port etc).

The problem i have is the usb ports on the actual laptop do not register any usb device when the laptop is on yet i do not have this problem when the separate docking station attached. The only way i can use a usb device on the laptop without the docking station is to plug in the usb device & then restart laptop. The annoying thing this is i have tried the following with no joy:

- Check device manager (all is well) & usb drivers are up to date (yes)
- Reinstalled win 7
- Enabled & disabled usb ports in bios
- Enables usb 2. 0 support
- Updateed bios version & chipset drivers
- Uninstalled & reinstalled usb drivers
- Separately scan for hardware changes
- Full virus check

I was thinking the usb ports where faulty at first but now im not so sure because if a usb device is plugged in e.g. Ipod then it will not register on os but will recieve power to charge & the same goes for my external usb hard drive as it starts spinning and led light comes on.


Posted On: 2010-03-04 . View Related Posts . . View 2 Replies .

Readyboost And Usb Ram Devices

Is there a usb ram device compatible with readyboost that would plug into usb and allow normal volatile/dynamic memory modules to be used rather than flash devices? Seems like this would be the next logical step to dramatically boosting the throughput. Sort of a usbramdrive. This could be very useful for corporate it support bumping up against maximum ram limitation and looking for ways to boost memory without replacing large numbers of systems. A usb ram disk would be a quick pluggable solution and maybe even a way to recycle older memory into a useful application.

 


Posted On: 2010-02-02 . View Related Posts . . View 4 Replies .

Usb Midi Devices Not Responding

Just recently my laptop won't let me use my midi keyboards. I'm on win 7 64-bit. The drivers are installed and it recognizes them, but when i try and use one it tells me the midi port is in use whenever no other program is open. I've tried uninstalling & reinstalling the drivers but this doesn't solve the issue. I also tried this fix from m-audio that's supposed to work if you've installed too many midi devices:http://www.M-audio.com/index.php?Do=support. Drivers&f=84 but this didn't work either.

It's not the hardware as i have a dual-boot and they work fine on the other partition. It was working last week and i can't figure out what is causing it. I have 3 midi keyboard controllers and all of them are showing this issue.system restore isn't an option as i had it turned off. Any suggestions would be welcome.


Posted On: 2010-07-04 . View Related Posts . . View 2 Replies .

Hotfix Wrecked Usb Devices

All my usb devices worked fine on windows 7 ultimate 64bit with asus m3n-72d motherboard with nforce 750a chipset and 8gb ram. Never had usb transfer issues prior to kb976972 usb hotfix downloaded from windows update as important update last night. After installed the update and restarted pc, i noticed my usb mouse cursor not moved on login screen then i used ps/2 keyboard to login windows to entered desktop.

Checked the device manager and found my usb mouse had ! Icon with code 39 error and realized the hotfix wrecked it, tried uninstalled hotfix as well restore but either failed to fix, still got code 39 error.

Searched internet for solutions, tried uninstalled usb mouse, usb controllers, usb hubs and reinstalled but still got code 39 error on usb mouse, printer, ipod and external hard drive.
How can i fix code 39 error?


Posted On: 2010-02-08 . View Related Posts . . View 2 Replies .

Usb Devices Not Recognised After Upgrading

Usb ports have power but won't recognize devices i'm running windows 7, 64 bit and ever since i upgraded the usb ports have been really flaky and now they won't read most devices. I've tried by sansa mp3 player and nikon digital camera in my old laptop and it reads them both instantly, but my new laptop can't see them. The disk spins a lot, but nothing happens. The ports will charge devices, but won't recognize them. All the usb drivers are up to date when i go through the device manager. Funny thing is that i go from zero problems with vista to this. Any real fixes to this issue?.

Posted On: 2010-08-09 . View Related Posts . . View 2 Replies .

Hp Dv2000 Not Detecting Usb Devices

My laptop is hp dv2000. When  tried plugging in an usb device in two of the usb ports, my computer was not able to detect the usb device.got the error message usb device not recognized. But when i tried connecting to the third usb part it readily accepted the device and every thing went on smoothly. Now am using only one port, and the rest is not able to be used. Before few days i was using vista on the same laptop that time i was not able to use only one port. But after upgrading to windows 7, i was not able to use two of them *original title - usb- drives are not detected*

Posted On: 2010-06-23 . View Related Posts . . View 2 Replies .

Blue Screen When Using Usb Devices

I use an i2c to usb converter (aardvark) from total phase that i suspect is the device causing bsod on my system. I have been in contact with their support and they can not reproduce it. It also works on my colleges system (also win7/enterprise/x64) which makes me suspect that there's something else causing the problem on my machine. Attaching/detaching the aardvark device when no other usb devices are present seems to work, but attaching it with other usb devices attached leads to a bsod. At least this is what i suspect right now, it might also be random or i haven't seen the pattern yet.

I've looked at the memory dumps but most often they do not point at a specific driver, but system files instead, e.g. Ntkrnlmp.exe.

Can anyone help me pinpoint the problem from my log files (minidump, nfo, etc):
http://cid-22ccba85ce241c7a. Skydrive.live.com/browse.aspx/. Public/windows%207%20bsod%20logs


Posted On: 2010-02-16 . View Related Posts . . View 3 Replies .

Usb Devices Suddenly Do Not Work

Ive tried about everything, i think . I have read in forums that a certain update may be causing problem. I have tried to remove some updates but cant find the one that is causing problem. I bought the laptop in feb the device worked then stopped working. I have removed the device and reinstalled still it is not working. Ran microsoft essentials, anitvirus ect. Nothing is helping. What can i do, anyone with advice that helps. Besides buy a mac.

Posted On: 2010-04-11 . View Related Posts . . View 2 Replies .

Usb Devices Not Detected - Bsod Driver_power_state_failure

I am using a toshiba satellite a505-s6025 running windows 7 pro 64-bit, 4gb ram, nvidia 310m graphics card. Things have been working well for a couple of months until yesterday, after i installed a western digital mybook world edition (1tb) and the most recent windows updates. After these installations, i have been having 2 problems:
 
1. ) First thing i noticed is that shutdown takes forever, and ends with a bsod with driver_power_state_failure message.
 
2. ) Secondly, none of my usb devices are being recognized anymore. Sometimes when i have these devices plugged before turning windows on they get recognized properly, but if i plug any usb devices after windows loads i do
Not get any recognition at all.
 
I've tried updating to the latest video drivers, bios, and uninstalling the programs that came with the wd drive (mionet and wd anywhere backup) but the problems haven't gone away.
 
Analyzing the memory dump led to this message:
 
On thu 5/13/2010 2:28:10 pm your computer crashed

This was likely caused by the following module: ntoskrnl.exe

Bugcheck code: 0x1000009f (0x4, 0x258, 0xfffffa8003b85040, 0xfffff80000b9c510)

Error: unknown

Dump file: c:windowsminidump


Posted On: 2010-05-13 . View Related Posts . . View 3 Replies .

Usb Devices Stop Responding After Upgrade

After upgrade to windows 7 64 bit home premium, usb connected devices, particularly hard drives, stop responding shortly after start up. Includes iphone, ipod, hp personal media drives. I purchased a brand new hp pavilion e9140f running a amd phenom ii x4 925 chip that had vista 64 bit home premium installed. It was eligible for free upgrade to windows 7 64 bit home premium.

I followed all instructions for upgrade and it went fine, except that now any storage device connected via a usb stops responding during file transfers. This includes my hp personal media drive that is brand new, my iphone, my ipod, etc. The only thing working is the hp pocket media drive which slides into it's own slot. I've tried uninstalling all usb devices in device manager and rebooting. Same problem. So now i can't copy files or back up my pc to an external drive.

I can't transfer music to my ipod or iphone. Basically, my $2, 000 pc is useless. This appears to be a known issue with windows 7 but there's no fix. I have tried everything except reverting back to vista where all these problems didn't exist. My usb devices worked. So this is definitely something to do with windows 7 upgrade. Can anyone help me with this. After 4 hours on phone with hp, nothings been fixed. They can't figure it out.


Posted On: 2009-11-11 . View Related Posts . . View 2 Replies .

Usb Devices - This Device Cannot Start (code 10)

"usb devices keep getting in error in device manager after computer reboot"hi. Whenever i reboot my computer 4 of my 5 usb ports are in error in device manager with error "this device cannot start. (Code 10)". I uninstall them, restart and they begin to work. Until next restart.

I've checked if the driver version is the same for all five usb ports and it's confirmed (driver version 6. 1. 7600. 16385 from microsoft). What can i do to solve it? Computer is a dell precision 490. Device is an intel (r) 82801g (ich family) usb universal host controller.


Posted On: 2010-06-23 . View Related Posts . . View 7 Replies .

How To Restrict Access To Usb Storage Devices ?

How to restrict access to usb storage devices on windows 7 and windows xp except administrator. At my institutions computer lab this is a big problem. Should format and install all the computers due to viruses circulating from pen divers at least once per semester. And cannot prohibit the use of pen drives. So i want to block access to pen drives on all student user group except administrator.

Posted On: 2010-07-23 . View Related Posts . . View 4 Replies .

Dell Studio 15 Usb Devices Will Not Work

I just upgraded from vista to windows 7 ultimate now my usb devices will not work usb universal host controller will not initialize. Dell studio 15 ich9 family usb universal host controller 2934 - 2939, and 293a, 293c
                                                         


Posted On: 2009-12-16 . View Related Posts . . View 8 Replies .

No Usb Devices Works Except Mouse / Keyboard

There are some threads here about non working usb devices. I read them all (i think) and tried all different kind of solutions but none is working. I have a hp ex500aa-b1u desktop. I used to have xp enterprise. One day the mouse and keyboard stopped working. I suspected some kind of virus and after a lot of work managed to start it in fail safe mode, backed up my files and then reinstalled xp.
Mouse and keyboard started working but all oter devices i put in (usb flash memory, camcorder, usb disk etc) just get the message "unknown usb device". I installed w7 enterprise instead but still have the same problem.

Is it possible that i had a virus that did something to my bios? I also have a built in usb disk that came with the computer. This disk is found after maybe 15 minutes after startup. But the speed when copying something from it is very slow. Maybe 700 kb/s.


Posted On: 2010-04-05 . View Related Posts . . View 2 Replies .

Laptop Giving Error 43 With Usb Devices

Usb nightmares - error 43 proving unsolvable.got my compaq laptop around 6 months ago and i haven't had a problem with it. Recently however the usbs began to malfunction, it would take me multiple tries to get them to work sometimes, and other times they would work instantly.

They have gotten worse and worse until now one of them doesn't recognize anything has been plugged in at all, whilst the other gives an error message in the bottom right corner which states "usb device not recognized". After further exploring this message i find that this is because of "error message 43" which tells me that the device plugged in has malfunctioned.

I do not believe this is true. I tried multiple different usb devices (ipods, flash drives, usb mouses and keyboards to name a few) all of which definitely work, as i have tried them on my desktop. My pc has no virus. The device manager assures me that all of the devices are working, and all drivers are up to date.

The lap top has taken no damage. The pc can not be restored to a previous time to make it work (indeed it has already been reset to factory setting with no joy) i have followed multiple online tutorials, found on the ms website, one of which involved editing the registry, which caused my laptop to not boot until i had run the system repair tool.

I am getting seriously weary of all of this, i just want my usbs to work as they should, especially on such a relatively new pc. If anyone knows how to solve this, or believes they may be able to if i provide additional information, please leave a response. Additional information, i am on 64bit windows 7.


Posted On: 2010-06-04 . View Related Posts . . View 2 Replies .

Usb Devices With Sd Card Reader Stalls

I have a new dell precision t1500 running windows 7 64-bit. After a lot of trouble shooting i have found the source of my problem is the following devices: dell u2410 monitor, hp officejet 6500 e709n and hp photosmart 8450. When any two of the three are connected at the same time the boot sequence stalls between the bios load and the windows logo. The computer starts up fine when only one of them is connected. The common thread among the three is that they all have sd card readers. I have had some limited success adjusting the bios settings.

For example disabling the usb storage function in integrated peripherals, but this has bad consequences for other usb connected devices such as my keyboard, mouse and other peripherals like an hd video camera. I have also experimented with the boot sequence of the hard drive and cd/dvd drive, disabled the above mentioned devices as start up candidates and disabled boot from other devices. None of these changes have brought any success. These two printers were previously successfully connected to my previous computer running xp.


Posted On: 2010-08-10 . View Related Posts . . View 8 Replies .

Unable To Connect Usb Devices After Upgrading

Windows 7 no working usbhey sorry about the lack of any information in the title but tbhthtas really all it is. I recently upgraded from vista to 7 and everything has been working fine. Everything was working great in 7 until i unplugged my usb wired mouse to connect it to a laptop temporarily. When i came back i couldn't get it working again no matter which of my usb ports i plugged it into. Also my usb wireless adaptor, usb memory stick and my usb webcam have stopped working as well. I should probably also mention that i now have alot of icons in my device manager called 'usb root hub' and they each have a yellow question mark by them.

In total there are 6 of them which is probably significant since i have 6 usb ports on my computer. When i go onto them it tells me that 'windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)' and whenever i tell it to update the driver it says that they have the most up-to-date driver installed. Lso my keyboard doesn't use usb and so far has been unaffected just to let you know but i only own usb mice. :(Just so you don't tell me to do stuff i've already tried here's what i have already tried:

1. Uninstalling all the usb root hub icons in my device manager then scan for hardware changes

2. Disabling all the usb toor hub icons then enabling them.

3.system restore to a previous date - i have done this twice already and each time my mouse starts working again for about 5 - 10 minutes. I have seen other places like this on the internet where people have suggested changing the registry manually but i am very wary of this method as i know just how easy it can be to mess something up in there.


Posted On: 2010-06-08 . View Related Posts . . View 3 Replies .