Advertisements:




Disconnected Bad Drive And Computer Says Error Loading Os


Whenever i restart my computer it goes to start up recovery and the description says bad hard drive which is the drive i used to have xp on if i disconnect drive computer will not start says error loading os and as far as i know there is nothing on d.

Disconnected bad drive and computer says error loading os


View Full Post With 2 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Disconnected Network Drive Error Occurred While Reconnecting

"an error occurred while reconnecting x: to \companyserversharefolderusersjones microsoft windows network: the local device name is already in use. This connection has not been restored.

This is the exact error i get, on a windows 7 client workstation, operating in a domain environment with windows server 2003 domain controllers. Reconnection of assigned user drives is scripted, and is run on upon logging in. Windows xp client computers do not have this problem. Since the scripted-in-group-policy drives disconnect after a short while, i've created mapped drives to solved the problem. No good; they all still disconnect after a short while and the user gets a red x over the network drive.


Posted On: 2010-02-18 . View Related Posts . . View 2 Replies .

Disconnected Network Drive

I run win 7 prof at work on my machine that is connected to the internal network and to ms small business server 2003 r2. Recently i installed windows virtual xp mode (exactly as suggested by ms) and have had nothing but trouble ever since - which is slowly getting even worse. Current dilemma (after uninstalling xp mode and virtual stuff) is that having extended my boot system partition (i think i regret this) i have lost all connection to our smb 2003 server.

I have the famous red x over the previously mapped drive/s and get the report that they are disconnected (and "an error occurred - path not found") when i click either of them. I'm nearly out of venom now, preferring to just fix it with a handy ms tool or get some detailed advice (so often missing from the win 7 help let alone smb 2003) on what might be happening. N. B. The server also reports that the path is no good when i query it at its own keyboard about the user "yours truly".


Posted On: 2010-06-05 . View Related Posts . . View 2 Replies .

Printer Disconnected Error

I am testing windows 7rc. Though i installed printer driver(showing in control panel) and software for my hp printer when i start hp solution center printer disconnected message appears eventhough the printer is connected and power on while there is no such problem in xp. How can i get around the problem? Checked with hp support but they are helpless regarding windows 7

Posted On: 2009-05-25 . View Related Posts . . View 3 Replies .

Persistent Bad Image Error

Can anyone tell me how to upgrade to w7 ultimate, i bought a copy 2 weeks ago and have been trying ever since to get it to load but it keeps hanging at 70% expanding files, i am currently running vista ultimate and have ran the compatibility program which say i should be able to use the 32bit disc, i am upgrading because i have a persistent bad image error everytime i boot vista, all startup programmes are reporting bad image with google desktop this has been removed but is still persisting.

Posted On: 2010-01-03 . View Related Posts . . View 4 Replies .

Dxdiag.exe Bad Image Error

I am running windows 7 x64. Yesterday i noticed that my game assassin's creed which ran in directx 10 mode earlier was running in directx 9 mode, so, i tried to force it in directx 10 mode but it gave error and exited. Then i tried to run direct x diagnostic tool dxdiag.exe but it is not opening up. It gives an error "dxdiag.exe- bad image c:winodwssyswow64d3d10.dll is either not designed to run on windows or it contains an error. " And when i press okay button then it says "error: could not load dxdiaggn.dll".

I have tried reinstalling my latest graphics drivers but no avail. I also tried updating directx but it says that i already have the most recent updates. I also have all the updates installed via windows updates. I have been using some registry cleaners but i have undone all the changes even after that it doesn't work.


Posted On: 2010-08-27 . View Related Posts . . View 6 Replies .

Bad Pool Header Error Appears Randomly

The same message of "bad pool header" comes up every occurrence. Have reloaded windows 7 3 times and rechecked all hardware/software. It comes randomly perhaps once in 10 days or twice a day whether on-line, in a program, or powering down. On stand-alone laptop.

Posted On: 2010-01-24 . View Related Posts . . View 4 Replies .

Error Loading Os

I have done several clean installs (after completely zeroing out my hdd), from a microsoft store downloaded (windows 7 home premium 64-bit) . Iso file. It installs just fine without any problems, however, in order to get the system to boot to the os, i need to have the installation dvd in the optical drive. Is there a way to correct thisfter completing the os installation, i installed all the latest drivers for my mobo, hdds, odd, graphics card and whatnot, as well as the latest direct x. When installing other programs and games, direct x, physx, and other drivers repeatedly load/install. What might be causing this? 

Posted On: 2010-08-09 . View Related Posts . . View 8 Replies .

Error 5 C Loading Schwinn 32

I got error code 5. 0. 13 and error 5 c loading scwin 32 shortcut program. While trying to load my shortcut program (scwin32) i got the error message error 5 c. I used this program with my windows xp system from my old laptop, can i use this program on my new laptop that has windows 7? If yes, how do i load it so it is usable with the microsoft word program in windows 7?

Posted On: 2010-03-30 . View Related Posts . . View 2 Replies .

Error In Loading Dll

On certain sites i cannot view videos, for instance youtube, nbcolypics, and netflix instant player. On youtube i receive an error message telling me that i do not have the latest version of adobe flash, and or my javascript is not enabled. In fact, i do have the latest adobe flash and my javascript is enabled.

I do not live in a big city, so i have been trying to trouble shoot this problem on my own. I was under the impression that this was an adobe flash problem, and have uninstalled and reinstalled adobe flash a number of times to no avail. I have done the same for java, checked my firewall settings, internet option settings, you name it and i've probably checked it once if not twice.

Tonight i noticed that when the video does not load there is an error on the page, and each says something about a dll not loading. Is there a safe way that i can check my dynamic link library for any errors, and fix them on my own?

Error code:

Error in loadingdll
Www-core-vfl148882.js
Code:0
Uri:http://sytimg.com/yt/jsbin/www-core-vfl148882.js
Line:16
Char:43


Posted On: 2010-02-27 . View Related Posts . . View 5 Replies .

Script Error Loading Dll

Line: 30
Character: 3
Error: error in loading dll
Code: 0

Url: file:///c:/program%20files%20(x86)dell%20support20center/sscommon/common/inc/ss_shellinclude.js

I get the above error message when i boot up win 7. Other times i get a similar message

Line: 242
Char: 3
Error: 'g_logger is undefined
Code: 0
Url: same as above

I have attempted to uncheck "display a notification about every script error, but it still shows. I have searched to uninstall "support center" via control panel, but i cannot find the program.


Posted On: 2010-05-08 . View Related Posts . . View 3 Replies .

Disk Read Error On Loading

Yesterday, i was working on windows 7, not overloading or something, but suddenly i heard the sound of the hdd that you hear when it stops (when you shut-down), and the pc stopped responding except the pointer. I restarted, and it gave me:

Disk read error
Press ctrl+alt+del

I restarted, it sort of booted giving me the 2 choices of windows 7:

-Start normally
-Launch repair

In start normally it loads up the boot screen but just after that it restarts. It restarted and read the hdd like "bzbzbzbz" after post. I entered bios, it read it as 571 gb and some weird stuff.

I happened to have live cd of linux on my usb flash (on which i'm working now), i mounted hard disk drives, they all work! But the "documents and settings" folder is empty.

This problem happened before and i don't know what the cause is?

Is it the mbr, track zero or sata controller? And please tell if i could do something through my usb flash (like launching a specific test or fix)
Hdd: western digital 160 gb 7200 rpm sata

Motherboard: gigabyte, chipset: intel 945g
Os: used to be windows 7
Ram: 1 gb ddr2


Posted On: 2010-07-14 . View Related Posts . . View 2 Replies .

Error 25004 When Loading Office

I have received error 25004 when loading microsoft office. I have been trying for a week to load microsoft office onto my newly purchased hp model hpe-210y and no success. We first tried office 2003 then we purchased office 2007 home and school. The uninstall was extremely difficult. And both times it says install was complete but when you try to run either software you get the error with the statement config.xml is missing. I really do want to make this work. But, my wife and myself both suffer from fibromyalgia the result of a trajic accident were lost our 4th son. So these kind of frustrations can quickly spiral into a major pain, literally.

Posted On: 2010-05-21 . View Related Posts . . View 2 Replies .

Failed Loading Cd/dvd Drives - Error - 43

Error: failed loading cd/dvd drives, error - 43. Try doing a repair install on itunes from the add or remove programs control panel.  When trying to burn audio cds from itunes. Cant burn audio cds from itunes. From itunes diagnostics, cant burn audio cds. I have a vaio vgc-rb30 computer.

Have tried re-installing itunes, window updates, and viao updates**** cd/dvd drive tests ****this is the error message from itunes diagnostics. Lowerfilters: pxhelp20 (2. 0. 0. 0), no drivers in upper-filters.

Failed loading cd / dvd drives, error -43. Try doing a repair install on itunes from the add or remove programs control panel. Force optical power calibration before burn is turned on in the preferences. The last failed audio cd burn had error code 4200(0x00001068). It happened on drive d: sony dvd rw dw-d22a on cdr media at speed 24x.


Posted On: 2010-08-11 . View Related Posts . . View 2 Replies .

Office 2007 Not Loading Error 643

New hp desktop (sept) with quad processor, 6mb ram, windows 7 64-bit, mcafee, spyware doctor. Had norton and office 2007 trial which i deleted (used norton removal tool from website). Had no problems with updates until after 11/10/09. Then updates started failing to install, but i didn't notice until several days ago when my outlook window failed to open. Happened to check update log and saw failures after 11/10.

Tried manual downloads instead of auto. Turned off mcafee when downloading. Windows firewall is off. Nothing worked. In desperation, i removed all installations and updates from 11/10 forward.

No luck. Removed office enterprise 2007 in order to reload. Installation failed with following comments: description: microsoft office enterprise 2007 setup did not complete successfully. We are sorry for the inconvenience.

Problem signature:
  Problem event name: office 12 setup
  Problem signature 01: {91120000-0030-0000-0000-0000000ff1ce}
  Problem signature 02: 12. 0. 4518. 1014
  Problem signature 03: publishproduct
  Problem signature 04: 1603
  Problem signature 05: 0x1935
  Problem signature 06: error 1935.
An error occurred during the installation of assembly component
{97f81af1-0e47-dc99-a01f-c8b3b9a1e18e
  Problem signature 07: x
  Os version: 6. 1. 7600. 2. 0. 0. 768. 3
  Locale id: 1033

Problem is only with microsoft related stuff. Did a test to download and install firefox with no problem. Anything ms to include update agent, nada.


Posted On: 2010-01-01 . View Related Posts . . View 7 Replies .

Error Loading X64 Driver - Did You Forget To Reboot

Alpine skiing 2007 give error "error loading x64 driver. Did you forget to reboot?"  I did reboot after installing the program on windows 7 for a dell pc. The demo version worked on this computer but after purchasing the dvd, it doesn't. I've tried all of the compatibility switches under properties but nothing works.

Posted On: 2010-03-23 . View Related Posts . . View 4 Replies .

Graphics Card Driver Error Loading Windows

Before i start, i'd like to point some stuff out. I am using windows 7 ultimate x64 bit. I run a dell inspiron 530my video card is pny verto geforce gt 220 (nvidia 200 series)now my problem? My problem is that whenever i try loading windows normally, it goes thru the "starting windows" process, but upon the end of that, the monitor just freezes. Nothing happens, no welcome or desktop, can't see my mouse pointer. I narrowed this down to a video card error.

My video card that i bought had said: windows 7 compatible. Well, its not working, and i've tried a lot of stuff. I reinstalled the video card, got drivers from the manufacturer, used the drivers from the cd, reinstalled windows 7, startup repair, system restore, vista compatibility mode with drivers. A lot of stuff. I can run safe mode properly, but i need to know what this problem is, what can i do to fix it, and why is it acting like this?

This card is brand new too. Oh yeah, might want to point out that i used the windows update to get drivers too, that didn't work. The reason i know this is a driver/graphics card issue is because whenever i uninstall the card/driver, the computer works with a lot of graphic issues (no aero, low resolution, etc. )I also had no problem installing windows 7, startup repair couldn't find a reason or solution to whats going on, so please to you microsoft workers, people, community, please help me.


Posted On: 2010-06-12 . View Related Posts . . View 3 Replies .

Network Indicator Disconnected

I have a windows 7 enterprise installed on my corporate laptop (t61 lenovo). A few days ago something happened to my network indicator. In turned offline (screen with x on it). The thing is that i'm still connected to the internet and working as usual. It happens with wireless or wired connections.

No system restore so i can't go back to whatever was before. Tried to uninstall the network adapters (both wire and wireless) and let windows reinstall them but with no luck. Tried to install new drivers - no go.

Tried all sorts of network cache cleaning , windows troubleshooter (to him everything is ok). My conclusion is that it looks like some kind of graphical bug because my networking works great (even in the network and sharing center it looks ok). What could be the cause for this weired bug?


Posted On: 2010-02-20 . View Related Posts . . View 8 Replies .

Re-enabling Microphone - Show Disconnected Devices

If you don't know already know. In the sound module in windows 7 there is a feature in properties to disconnect the device using the device usage drop-down menu in the general tab. I have been scouring the internet for days to try and find a solution for re-enableing my microphone. I finally found the solution purely by accident when i right clicked in the empty space where my mic was once displayed. I clicked on the option to "show disconnected devices" whola 2 devices popped up. All i had to do was go back to properties and re-connect them.

Question is:
Why have microsoft set this option to hide them by default?

Why have this feature in the first place?


Posted On: 2010-04-27 . View Related Posts . . View 2 Replies .

Usb Flash Drive Not Seen In My Computer But Seen In Drive Management

I have a problem win 7 dose not recognize usb flash drive it is seen in drive management and has a letter assigned to it but it is not seen in my computer it works fine on xp pro and home.

Posted On: 2010-02-09 . View Related Posts . . View 2 Replies .

Bad Windows Updates

Windows just sent me a update that freezes windows explorer in about 1/2 hr of use. This is the third time they have sent a bad update to me. The worst one was a virus that piggybacked on a update, it prevented me from getting access to the inter-net. Do they ever check a update to see if it's worse than th problem they are trying to cure? Don't they have a virus check on updates before the send then or a virus block to prevent them from infecting someones computer?

Posted On: 2010-05-29 . View Related Posts . . View 3 Replies .

Bad Cluster In File

Woke up this morning, turned on my computer and now for some reason, it won't load past the welcome screen. I didn't install anything yesterday, when it was working just fine. Windows didn't install any updates while it was shutting down. I tried booting in safe mode with networking, does the same thing. But it does boot in regular safe mode. When i would start it up regularly, it sometimes went past the welcome screen but stayed black.

I was going to choose "startup with last known good configuration" but when i restart the computer, it won't let me get there. It just goes to the screen saying i had a system failure and if i want to boot in safe mode or regularly. Help me please! I just bought this in august 2009. Here are my system specs:

Windows 7 home premium
Amd turion x2 dual-core mobile rm-74 2. 2ghz
64-bit operating system
Disk drive: st9500325as ata device
Dvd/cd-rom drive: hl-dt-st bddvdrw ct10l ata device
Display adaptor: ati mobility radeon hd 3650

Update 1: i was able to restart when it was in safe mode and was able to choose "start up with last known good configuration" but the same thing happens. It gets to the welcome screen and just sits there.

Update 2: after just leaving it alone while it was restarting, it stayed on the welcome screen for about 10 minutes, then went to the black screen for another 10 min. Then this warning popped up:

Dwm.exe - application error
The application was ubable to start correctly (0xc0000006). Click ok to close the application.

I clicked on ok then it just went back to the black screen. It has stayed this way for about 5 min now.

Update 3: still tinkering with restarting and booting in safe mode. Now, when in safe mode, a balloon message pops up in the system tray saying "microsoft isatap adaptor - device driver software installed successfully". What is that?!?!?

Update 4: i tried performing a check disk, was able to put in command while in safe mode. After restarting, it started counting down the seconds until it started the disk check. It froze on 1 second. It has now been sitting here for 5 or so minutes.

Update 5: i did a hard restart on my computer. After a couple of hours of the check disk scan, it found a bad cluster in file 294017. My computer started and now my network adaptor is not working. I can't get on the internet! I restarted the computer, worked just fine, but still no internet. Also, the screen keep going black then back every few minutes.


Posted On: 2010-01-24 . View Related Posts . . View 2 Replies .

Error Loading Resources Could Not Load Player Resources

When i try to play a streaming movie/video in ie8(microsoft windows xp media center edition version 2002 service pack 3)from http://www.Dyermovie.com/streams/?
Transactionid=ecdc874c1af901d059d490dbedd4d786, and i select a connection speed, i keep receiving an error loading resources/could not load player resources error box. Then, on the screen it says the movie is about to begin and never does. Please help. I have not made any recent changes to my computer nor do i know what to do to fix this problem.


Posted On: 2010-03-04 . View Related Posts . . View 2 Replies .

General Midi Driver, Sounds Bad

I recently installed a new motherboard/processor on my comp and windows 7. Everything is 5-10x better, especially recording. But i have one major problem and i can't find any help for it online (i've searched for hours!).

The midi sound is terrible, playing a midi file or just within a program like guitar pro. I write my songs in guitar pro so i need this fixed asap it's driving me nuts.

The motherboard i have is the "gigabyte ep43-ud3l"

In guitar pro, it can't play through a full 3 minute song without sounding like _ by the end (going off time and the sound just gets worse and weak) it can't do slides. You do a 3 fret slide on a guitar and it hits a random tone in between notes and i dunno everything sounds awful! The drums are backwards (57 crash used to be on the right and now its left). Oh and when you do strumming on the guitars, there's an annoying glitchy click and the rhythm is off time etc.

Is this a general midi problem with windows 7 or is my computer just special?

This whole post probably sounds like a rant, if more details are required to get some help/tips just lemme know and i'll answer any questions.

I almost wanna go back to xp just so i can use guitar pro again, oh and the rse sound engine is the worst thing ever, so that isn't even an option.


Posted On: 2009-10-17 . View Related Posts . . View 2 Replies .

Blue Screen Bad Pool Header

Sometime last night my machine started giving me the bsod, its poped a couple of diferent messages but the most common one so far is bad_pool_header i have also gotten page_fault_in_nonpaged_area. Those are the only 2 i can remember, i checked and all my drivers are up to date. My machine is as follows

Amd phenom ii x4 955
Xfx radeon hd5770
4g g-skill ripjaw ram (ddr3)
Corsair h50
Asus m4a785td-v evo am3 amd 785g hdmi atx amd
Seagate barracuda 7200. 12 st3750528as 750gb 7200 rpm sata 3. 0gb/s
Lg dvd burner - bulk black sata model gh24ns50
Microsoft windows 7 home premium 64bit

I get the problem about every half hour, bellow is the last error report it gave me.

Problem signature:
Problem event name: bluescreen
Os version: 6. 1. 7600. 2. 0. 0. 768. 3
Locale id: 1033

Additional information about the problem:
Bccode: 50
Bcp1: fffff900be910494
Bcp2: 0000000000000001
Bcp3: fffff9600061a002
Bcp4: 0000000000000002
Os version: 6_1_7600
Service pack: 0_0
Product: 768_1

Files that help describe the problem:
C:windowsminidump


Posted On: 2010-04-13 . View Related Posts . . View 5 Replies .

Cannot Backup From One Pc To Second Hard Drive Of Other Computer

Set up windows 7 ultimate home network, but cannot backup from one computer to second hard drive of other computer. Both computers running windows 7-u. My network is wireless, and all the computers can see the other computers on the network, but when i try to backup data from one computer to another computers second hard drive, i receive the message "network error, windows cannot access
Company-pce backup disc.

You do not have permission to access company-pce backup disc.contact your network administrator to request access. When i click in "for more information about permissions. The window says to check :

1. You have not created a homegroup. Yes i have.
2. Your not using a homegroup and the folder has not been shared. I think the folder is shared, but i am not certain by what it means i am not using a homegroup.
3.netork discover is turned off. It is turned on on both computers.
4. Password protected sharing is enabled. No, it is disabled.
5. The computers are not in the same workgroup. Don't know what that means.
6. Your computer does not have the latest updates for your router. Dont know what that means.


Posted On: 2010-04-29 . View Related Posts . . View 2 Replies .

Floppy Drive Shuts Down Computer

I own a 2005 dell 8400 xp, it did not come with a floppy drive. When i purchased my designer i embroidery unit it required floppies. I ordered a small floppy drive and plugged it in a usb port. For the past couple of years this had worked fine. Now when i plug it in the computer acts as though something is attacking it and shuts down. I use frontier "peace of mind" for my troubleshooting and what not and they told me that when windows did an upgrade it must have down something to no longer recognize the floppy drive and suggested i call dell. Since my computer is no longer under warranted they wouldn't hep me. What can i do?

Posted On: 2009-12-19 . View Related Posts . . View 2 Replies .

Usb Hard Drive Does Not Appear In My Computer

I have an ads tech external hard drive that allows one to put any regular hd in the case and connect it to the pc via usb. My 2-week-old machine has windows7 running. After successfully accessing and removing all data on a hd using the usb external, i removed it from the computer, and placed another hd inside the usb case. Upon reconnecting, win7 recognizes that a usb device is being connected.

Windows also lists the device in the device manager and it is listed under devices and printers (from the control panel). Upon attempting to troubleshoot the device, i'm told that no problem can be identified. After rebooting with the device attached and unattached, it still does not appear in the list of hard drives in my computer.


Posted On: 2010-04-11 . View Related Posts . . View 5 Replies .

Win7 Gave Me Bad Information Concerning Files To Delete

I tried to install windows 7 on my desktop computer. I am upgrading from vista, using the 32 bit disk. Windows ran the compatibility program and came back with information concerning items i needed to uninstall in order for the procedure to go smoothly. I did what i was advised to do and now the program can't install because it can't get online. One of the items it told me to uninstall was the google tool bar, one was hardware diagnostic tools, one was intellitype and one was commodo internet security. Obviously one of them, (or all) facilitated getting online. Help, help, help.

Posted On: 2010-03-07 . View Related Posts . . View 8 Replies .

Logon Failure Unknown Username Or Bad Password

My laptop is running windows 7 pro. I have created a vpn connection  to my workplace and saved the connection credentials for any user of the laptop. This works fine, but when i try to login to the domain i get the error: login failure:unknown user name or bad password. This is after using the switch user option and then using the network connection option, this brings up the vpn login window, i re-enter the vpn login credentials, the machine connects to the vpn and then goes to a welcome screen and this is where i get the error message. With xp pro this did not happen, the machine would connect to the vpn and then display a domain login window. What am i doing wrong?

Posted On: 2010-05-27 . View Related Posts . . View 3 Replies .